Reg enhanced Receiver determination

Hi Guys,
if i have to send data to 10 receivers but how many Interface Determinations i have to create
could anyone give me about enhanced Receiver determination
Thanks

Hi Khusee,
You will have the following,
1. 1 receiver dtermination where you cna keep on adding the 10 receivers but do not specify any condition
2. create 10 different mappings - one for each receiver but the source structure in all of them would be the same only the target structure will keep on changing.
e. g suppose source structure has 100 fields ....then consider mapping 1 which is for receiver 1 ...
here you cann mapp say 10 fields to the target structure ...in mapping 2 for reeiver 2 you can map say only next 5 fields to the target strucure so on and so forth
3. you will also have 10 interface mappings
4. 10 interface determinations where you can specify the mappiings created above.....
hope it helps

Similar Messages

Enhanced receiver determination - Idoc 2 Idoc scenario

Hi,
I am trying Enhanced receiver determination - in an Idoc 2 Idoc scenario.
But when I selected Enhanced receiver determination in ID, it is asking for interface mapping.As it is an Idoc 2 Idoc scenario, I did not create any mapping objects in IR.
Is there any round about for this.
reg,

Hi,
if you are planning to send the Idoc to two systems then you do not need Enhanced Recieevr Determination.
You can add multiple Receivers In the receiver Determination under Configured Receivers and now the same idoc will be sent to 2 receivers.
Like mentioned by moorhty, Enahnced Receievr Determination allows you to dynamically determine receivers using a mapping program.! I dont think that is needed in your case
Regards
Bhavesh

Enhanced Receiver Determination for synchronous interface.

Hello!
Was anyone faced with the Enhanced Receiver Determination? When I try to create
the definition of the Interface Mapping, I get the error:
"Interface modi are different. Source interface Message Interface MI_My_sync_iface | urn:my is synchronous. Target interface Message Interface ReceiverDetermination | http://sap.com/xi/XI/System is asynchronous"
Thank you.

Hi ,
U can go through below limks :
Illustration of Enhanced Receiver Determination - SP16
SAP NetWeaver Process Integration: Enhanced Receiver Determination for Synchronous Scenarios
Enhanced Receiver Determination in SAP XI - Exchange Infrastructure - Wiki
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/enhanced%2breceiver%2bdetermination%2bin%2bsap%2bxi
Thanks

Enhanced receiver determination

why we assign the abstract message interface ReceiverDetermination as the target interface.can we achieve enhanced receiver determination without this abstract interface.I have gone through sap help and some blocks of sdn also but still its not clear to me that whats the role of this abstract interface.

Hi
For receiver determination::- See
http://help.sap.com/saphelp_nw04/helpdata/en/26/5ccd3bb4560f01e10000000a11402f/content.htm
About
Abstract Interface :
The abstract interface work both inbound and outbound interface(Bi directional).
BPM can process messages only through "abstract interfaces" al though Receive and Send steps can have interfaces other then "abstract interfaces" all other intermediat steps of BPM needs "abstract interfaces"
Hope it helps
regards
Piyush

Problem with Enhanced Receiver Determination

Hi Friends,
I am doing the enhanced receiver determination scenario, But it is giving the
error in SXMB_MONI like this
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">CX_RD_PLSRV</SAP:Code>
<SAP:P1>Problem while determining receivers using interface mapping: Fehler beim Parsen der Empfänger-Liste.Länge des XML-Dokuments 264</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when determining the receiver: Problem while determining receivers using interface mapping: Fehler beim Parsen der Empfänger-Liste.Länge des XML-Dokuments 264 Problem while determining receivers using interface mapping: Fehler beim Parsen der Empfänger-Liste.Länge des XML-Dokuments 264 Fehler beim Parsen der Empfänger-Liste.Länge des XML-Dokuments 264 System expected the element 'Receivers'</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
this is error is coming in the SXMB_MONI
THE DATA type(Receivers) we create in basis component is comes automatically?
are we have to create?
in my scenario i creted manually,
is it compulsory to specify the properties for the party and agency?
is it compulsory to create 2 Receiver structures in msg structure?
if yes what r those, actually i used from sap.help.com,
Can any body should give me the solution for this, regarding mapping and configuration , if anybody experienced this scenario. Pls . give me the guidelines to do.

Hi,
the mapping creating the receiver list is not producing the required element "Receivers" from Namespace "'http://sap.com/xi/XI/System". Look to the operation mapping given in the enhance Receiver Determination (IB Directory) and detect the corresponding mapping program (ESR). Copy the source payload from MONI, test the mapping program and correct it.
Regards,
Udo

PI 7.1 - Parameter in enhanced receiver determination

Hello experts,
I am working on PI 7.1.
I defined a scenario where I am using an enhanced Receiver determination to determine the list of target services thanks to an operation mapping and its related message mapping. I'd like to pass a constant value from this receiver determination to use it in the message mapping.
To do so, I set an import parameter in the operation mapping and the message mapping and made the needed binding.
I can then see this parameter in the receiver determination, but I can not put a constant value in it and then activate my configuration..
Do you know why ?

Hi
I have not used this feature yet, however I dont think that this is a bug.
the Parameterized mapping feature is for ID->OM->MM & not for RD.
more info
http://help.sap.com/saphelp_nwpi71/helpdata/en/43/bbb7fd90f5332ee10000000a11466f/frameset.htm
/people/jin.shin/blog/2008/02/14/sap-pi-71-mapping-enhancements-series-parameterized-message-mappings
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/909e33f0-738c-2a10-4f87-ce73398bcf08
Regards
Vishnu

Intermittent JDBC error in Enhanced Receiver Determination

Hi,
I have an interface that use Enhanced Receiver Determination in PI 7.1 EHP1.
The database is DB2 on i5/os 6.1
Sometimes message ends in error :Error when determining the receiver: Problem while determining receivers using interface mapping: Runtime exception occurred during application mapping com/sap/xi/tf/_HI01_to_ReceiverDetermination_;
But the same message with same values is successfull earlier.
This is not a design problem; the interface is working well 95% of the time.
I found some JDBC error in NWA java logs:
Error in sax handler parsing request: Error when executing statement for table/stored proc. 'table' (structure 'statement'): java.sql.SQLException: [SQL0104] Token "BUSINESS_SYSTEM" was not valid. Valid tokens: FOR SKIP WITH FETCH ORDER UNION EXCEPT OPTIMIZE.
Error when calling an adapter by using the communication channel CC_RECEIVER_JDBC_PIDB2 (Party: *, Service: INTEGRATION_SERVER_PX1, Object ID: cb7ea38fb2ac3a06b12d79f5ade2bcf7) XI AF API call failed. Module exception: (No information available). Cause Exception: 'Error processing request in sax parser: Error when executing statement for table/stored proc. 'table' (structure 'statement'): java.sql.SQLException: [SQL0104] Token "BUSINESS_SYSTEM" was not valid. Valid tokens: FOR SKIP WITH FETCH ORDER UNION EXCEPT OPTIMIZE.'.
Thrown:
com.sap.aii.af.service.api.AFException: XI AF API call failed. Module exception: (No information available). Cause Exception: 'Error processing request in sax parser: Error when executing statement for table/stored proc. 'table' (structure 'statement'): java.sql.SQLException: [SQL0104] Token "BUSINESS_SYSTEM" was not valid. Valid tokens: FOR SKIP WITH FETCH ORDER UNION EXCEPT OPTIMIZE.'.
at com.sap.aii.af.service.api.AdapterAccess.sendMsg(AdapterAccess.java:214)
at com.sap.aii.af.service.api.AdapterAccess.execute(AdapterAccess.java:283)
at com.sap.aii.ibrun.server.lookup.AdapterProxyLocal.execute(AdapterProxyLocal.java:119)
at com.sap.aii.ibrun.server.lookup.SystemAccessorInternal.execute(SystemAccessorInternal.java:76)
at com.sap.aii.mapping.lookup.DataBaseAccessor.execute(DataBaseAccessor.java:74)
at com.sap.aii.mappingtool.flib7.SelectSingle.selectSingle(SelectSingle.java:54)
at sun.reflect.GeneratedMethodAccessor607.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:592)
Any idea? Can high volume cause the JDBC Receiver to fail?
Martin

hi,
you r trying to impliment Lookup for the file adapter which is not synch in nature and hance u r not getting the responce back.
please find the link which deals with how to impliment lookup for file adapter.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/file%252blookup%252bin%252budf.
now once u get rhe runtime receiver u can perform enhanced receiver determination (write a simple UDF)
regards,
navneet.

Enhanced Receiver determination - for Integration Process

Hi,
Just wanted to confirm that if it is possible to have more than one Receivers, with Enhanced Receiver Determination and one of the Receiver happens to be Integration Process. I know with Enhanced Receiver Determinations you can find more than one Receivers at Run time, however the key question is, if in addition to normal Receiver Systems (like SAP R/3 or Web Services etc), if we can also kickoff Integration Process within Enhanced Receiver Determination.
Thanking in advance.

as said by Udo Martens
Assumedly the different receivers are using different Inbound Interfaces (a BP is using an Abstract Interface). Therefore you would need for each different receiver a own Interface Determination referring a own mapping.
refer this wiki http://wiki.sdn.sap.com/wiki/pages/pointstab/viewpageversion.action?pageId=131760630&version=5 to Know how to configure Enhanced receiver determination and Interface determination for each receiver .
In your case one of the receiver will be Integration process

Can I Using Enhance Receiver Determination?

Hi,
Can I used Enhanced Receiver Determination to push data to Receiver 2 , based on the response coming from Receiver 1 ( a BPM that that has a synchronous send step and fetches response from SAP through a proxy) ? If yes, how ?
thanks & regards,
XA

We can have just a send step and for that send step we can configure a condition based receiver Determination right?
yeah correct
> and Can you throw some light on how to deal with queues, in case if the response doesnt come from SAP to PI due to some reason, which can happen in real time?
it will thhrow time out exception or message expired exception, if you want to do exception handling do it accrodingly using Control step.
Regards,
Raj

Enhanced Receiver Determination in PI7.1

Hi,
We have a requirement where in we have to use the Enhanced Receiver Determination for one of our scenarios for choosing the receiver.We are on PI7.1.
As of now,we have mapped a constant rcvr(Test_Supplier) to the Service in the message mapping from our source to the target -Receivers, as we do for Enhanced Receiver determination.The rcvr determination choosing Extended and the correct Operation mapping has been configured.The coresponding Interface determination and Receiver agreements have also been configured.
When trying to test this by posting a payload through RWB,we get the No_Receiver_Case_Async error.
Is it necessary to map the party field also in the message mapping?Am I missing something here?Kindly advise.
Thanks and Regards,
Induja

When trying to test this by posting a payload through RWB,we get the No_Receiver_Case_Async error.
Is the Mapping which you developed to determine the receiver(s) able to give the appropriate output? Apart from cache problem, this can also be the issue when the mapping does not produce i.e. no proper service is populated in the corresponding node....the service must be actually present (and active) in ID
Regards,
Abhishek

Enhanced receiver determination and value mapping

I want to use enhanced receiver determination functionality in my scenario.
I couldn't see any message interface or data type under http://sap.com/xi/XI/System.
we are on Sp08 nw04s and SAP BASIS 7.0 software component in IR.
I don't want to hard code my business service name in mapping.How can I achieve this?
Thanks,
Rekha.
Message was edited by:
Rekha Lather

Hi,
> couldn't see any message interface or data type under http://sap.com/xi/XI/System.
we are on Sp08 nw04s and SAP BASIS 7.0 software component in IR.
After upgradation to SP08 on NW04s , did you reimport the SAP BASIS Component into your IR? Ask your basis admin team to reimport the SAP basis Component into the IR.
>I don't want to hard code my business service name in mapping.How can I achieve this?
Similar discussion available in the comments section of this blog,
/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16
Would suggest you use value Mapping.
Regards
Bhavesh

Problem while determining receivers in enhanced receiver determination

i am doing scenario FILE-TO-FILE (with one sender and 2 receivers, dynamic receiver identification based on mapping)using enhanced receiver determination,
it is giving following error in MONI,
Problem while determining receivers using interface mapping
System expected the element 'Receivers'
pls. help me if anybody experienced this scenario,
i am doing this scenario based on the below blog.
/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16

Have u properly followed the weblog,
Integration Repository Step No 2 and Step No 5
2. In order to use the enhanced receiver determination, create a message mapping which has the target message as Receiver Determination in the SAP BASIS --> http://sap.com/xi/XI/System.
5. Create the Interface Mapping 
U must have checked that ur Xi is on SP 16 or above )
Regards,
Prateek

How enhanced receiver determination works..?

hi all,
In enhanced receiver determination Interface mapping(which has java mapping) I have also included logic to make some change in content of input file and dynamic configuration for output file name. My input and output are flat files. So I m using dummy structure. In interface determination i m not referring any Interface mapping.
Receiver determination is working properly But neither dynamic file name nor the changes in content of file are reflecting in out put file.
Is it mandatory to use separate mapping in interface determination to change the content of file and dynamic file name?
Thanks
Jai
Edited by: Jaideep Baid on May 29, 2010 6:27 PM

Is it mandatory to use separate mapping in interface determination to change the content of file and dynamic file name?
The mapping used to in receiver Determination is to decide the Receiver.....the mapping used in Interface Determination is to create the target structure....both are to be developed and used separately (one in Receiver Determination and other in Interface Determination respectively)....this wiki gives you an example:
http://wiki.sdn.sap.com/wiki/display/SI/StepbyStepguidetoExplainEnhancedReceiver+Determination
Regards,
Abhishek.

Enhanced Receiver Determination with RFC Lookup

Hi All,
I am building an interface with Enhanced Receiver Determination. Scenario would be that the Receiver Systems would be stored in a Z table in SAP ECC, and in PI Receiver Determination I am doing an RFC look up to find the systems, and using those.
I built the mapping for Receiver Determination, and it tested fine in ESR. But while Creating the Receiver Determination in Integration Directory, After I specify the Receiver mapping name, and put the RFC channel name for the RFC parameter, it doesnt allow me to save the Receiver Agreement with a run time error message
"Link from Receiver Determination | <Sender>| <Interface>| * | * to object type "Channel" with role "122474913b1311deaadb42057dd8b002" is not permitted"
My question is a) if the RFC lookup allowed in the mapping for Receiver Determination?
B) if yes, am I missing someting or is it a system issue?

i have seen Enhanced RD with lookups that work. Have to say it was not a RFC lookup used but rather a DB look in one of the implementations i had worked with. But still I really dont think a RFC lookup should be an issue.
Troubleshoot the lookup mapping to be working other than in the enhanced RD (i.e independently) .
if you head no where, i suggest opening a OSS note.

Regarding Enhanced Receiver Determination

Hi Experts,
I go through the Blog
/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16
In this i am not getting the Source Msg Structure And Target Msg Structures
Can any one Give me a LOOK at this Structures Please..............
Regards
Khanna

Hi,
>>>>Can u Explain me in detailed what is the use of SAP BASIS 6.40 here.
What is the necessary in this scenario.
Why should we create Receiver et in the SAP BASIS.
>>>>SAP BASIS 6.40 here.
you can get required message type from it
>>>>Why should we create Receiver et in the SAP BASIS.
no need as it's already there (the message for receiver det)
Regards,
michal

Reg enhanced Receiver determination

Similar Messages

Maybe you are looking for