Reg: Error in adapter Engine Monitoring

Hi Guys,
            In my RFC to File Scenario i got error as Adapter message property was configured was mandatory element but there is no Dynamic ocnfiguration elementin XI MEssage Header. This is occur in adapter engine monitoring in RWB.
Thanks

This error comes if you there is a problem in passing the file via dynamic configuration
for this if you want temporary solution like filename not necessarily be dynamic then go to receiver file adapter then
adapter specific message attributes deselect filed Failif file name does not.... sme option where you can uncheck the failure option
and in this case need to provide the filename and file will get generated with this filename if there is no filename generates using dynamic configuration
for this to resolve permanently then check the filename is passed or not  to file adapter in moni in dynamicconfiguratuoin tab of callAdapter pipeline service
HTH
Rajesh

Similar Messages

  • In my Component monitoring i got this error for Adapter engine status.

    In my Component monitoring i got this error for Adapter engine status. Status is in red..
    Attempt to fetch cache data from Integration Directory failed; cache could not be updated
    [Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.03.server3, string], target element type: SAP_BusinessSystem)
    Please clarify ASAP..
    Thanks..

    HI,
    See below links you will get ..
    Process Integration (PI) & SOA Middleware
    ERR:Could not find SLD name for XI Application "DIRECTORY"
    Unable to find an associated SLD element
    Regards
    Chilla..

  • RWB-Adapter Engine-Monitoring calling url of shorthost name

    Hi,
    I am familiar with where to set the domain name or short names for XI within the various connection settings
    in the Exchange Profile. Does anyone know where the adapter engine monitor settings are stored? We are suddenly getting errors for http://host:52100/mdt/AmtServlet but if I put the FQDN in a new browser window it works fine. But the developers
    here are unable to post to the adapter....
    Thanks so much in advance...
    Jim

    Hi James,
    FQDN is essential not only for RWB but for other components of WAS as well. Launch XI page wiht sxmb_ifr and check if it displays FQDN. Else follow the complete FQDN activation procedure as below.
    1. In RZ10, add the parameter icm/host_name_full in instance profile.
    2. Restart your system and follow note 764176 for changing SLD associations. This is important.
    3. For adapter engine, apply note 804124.
    Follow the complete procedure.
    Regards,
    Youvraj

  • CCMS Adapter Engine monitoring

    Hi,
    CCMS has been configured in our land scape long back. this configuration gets data from adapter engine and display it. We need to modify this. When we checked the configuration all Integration engine errors are being gathered using standard MTE classes and respective auto reaction methods are set.
    But where as for Adapter engine monitoring a custom MTE's are created in below format.
    <SID>\<SID> 00 Serv 2345672 pidev\Services\Adapter Framework\Messaging System\Sender Services\BS_Econ\Error Backlog
    This has no standard method assigned to it. Searched over SDN, no GRMG is configured for polling this data. Please help in understanding how data can be polled for CCMS with out a method?

    Hi ,
    please check the below link for GRMG configuration steps and check the SAP Note 634771.
    Configuring the CCMS Heartbeat Monitor for Java Components
    http://help.sap.com/SAPHELP_NW04s/helpdata/EN/e5/5d1741b393f26fe10000000a1550b0/content.htm
    Regards
    srinivas

  • Error in Adapter engine-"No_Spedin"

    Hi All,
    I have observed the below error in adapter engine today(System error).
    JCO.Exception while calling /SEEAG/RELI_XI_EDIINH_FILE in remote system (RfcClient[PEQ_RFC_INBOUND]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Exception condition "NO_SPEDIN" raised.: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException
    The message is going to print Sumfax to SAP ECC.There are no errors in the mapping and the communication channel is also running fine.there was an upgrade in SAp recently after which i observe this error and it didnot exist before.
    Can anybody please help me!

    Hi Sudha
    check Abhishek's Reply  may be helpful  at this thread for com.sap.aii.af.rfc.afcommunication.RfcAFWException
    Re: Error during processing local bean: localejbs/RfcAFBean
    also check the The Sender Agreement Interface , it is either missing or not correct in ID
    Regards
    Abhishek

  • Graphic Mapping:IDOC to File-Avoid Error in Adapter Engine

    Hi all,
    I'm using Graphic Mapping in my IDOC to File scenario in which each segment in source IDOC will generate a ROW in target File with the condition: DATBI >= currentdate (and some other conditions)
    I have a UDF and use the mapping function CREATEIF for this purpose:
                                 DATBI -> UDF -> CREATEIF -> ROW
    Problem scenario: In the source IDOC if all the segments have DATBI < currentdate then there is no ROW created, and I get the error in Adapter Engine
    Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure ...
    How can I avoid this?
    I've tried to put this condition using XPATH in Interface Determination and got the error.
    There is a way to use function current-date() in XPATH condition?
    Thanks for your help,
    Elaine

    Hi all,
    How can I "suppress the row node if condition fails"? I'm new in PI, so please give more details.
    My FCC as follows:
    Record Structure: Record, Row
    Row.addHeaderLine 0
    Row.fieldSeparator ,
    Record.fieldSeparator 'nl'
    Row.endSeparator ; 'nl'
    It works fine if the condition satisfied.
    In Message Mapping, I've use Test to double check my mapping, and in the scenario that conditions fails, there is no Row in the target message.
    Please advise.
    Thanks,
    Elaine

  • ALERT not getting triggered for messages in error in adapter engine

    Hi All,
    I am doing the same scenario where I have created two Alert category Alert_cat1 and Alert_cat2, both are similar but one i have created for error in integration engine(Alert_cat1 ) and other for adapter engine(Alert_cat2).
    Now for Alert_cat1 i have created a rule and in the setting "where did the error occur" I have given no restriction.
    Now for Alert_cat2,as discussed in the above blog I have created many rule each for various adapter.
    I have tested it, above mentioned configuration is working for message mapping error (sxmb_moni)
    but not for any error in adapter engine for messages in waiting or system erroe status.
    Kindly suggest where I am going wrong.
    Regards
    Shefali S

    HI,
    please refer this below blog:
    Does Alerts work for Integrated configurations scenario??
    thanks,

  • Adapter Engine monitoring doesn't show messages

    I have 2 scenarios
    1. Synch HTTP -> Synch RFC
    2. Synch HTTP -> Synch BPM -> Synch RFC
    In case 1 Adapter Engine monitoring shows all messages correctly
    In case 2 there is no entry for HTTP Sender system only BPM->SAP System.
    Could you help me why RWB doesn't show it?

    denis,
    just to add to what moorthy has told. IDOC and HTTP adapters interact directly with the INTEGRATION ENGINE on the ABAP STACK while, the other adapters interact with the ADAPTER ENGINE available on the J2EE STACK.
    That is why, you do not gind the same on the RWB --> ADAPTER MONITORING.
    Also, the reason why you do not have a SENDER HTTP and IDOC adapter.
    Regards,
    bhavesh

  • J2SE adapter engine monitoring.

    Hi,
    I have setup GRMG monitoring for a J2SE adapter engine in our landscape. I have set up a HTTP RFC destination in SM59. In the HTTP RFC destination, type H, I have specified the "Target Host" (FQHN) the "Service No." (8200 default J2SE installation port) and a "Path Prefix" (/rtc). The security is set to Basic and I have used a PIRWBUSER that I have setup on the J2SE Adapter Engine with role Administator. In the GRMG template I insert the RFC destination.
    I have also inserted the ID, ESR, RWB, SLD and the Central Adapter framework of the PI system in the GRMG template, then deployed the template on the monitoring server. I am able to successfully monitor the other components except for the J2SE adapter.
    I have to concede that when I test the RFC destination to the J2SE adapter it does not work. I think the J2SE adapter is up, as I can connect to the administrator. Even when I put the url ("host:port/rtc") for the J2SE adapter in my browser, it then request to login. After I have logged in, it gives a error "The Page can not be found".
    It would be most appreciated if someone can shed some light on this issue.
    Regards
    Willie Hugo

    FTS SAP Basis,
    Thanks for that advice. However once I have set the "Accept cookies" to "Yes", and once again I do a "Connection Test", the result I get "ICM_HTTP_CONNECTION_FAILED". Also remember when I try to connect to the URL "http://host:8200/rtc", it requests a login, but then display "The page can not be displayed".
    Any other suggestions are welcome.
    Regards
    Willie Hugo

  • Error in Adapter engine in RWB

    Hi,
    I'm facing 2 type of issues in RWB,
    Issue 1) Adapter Engine is in Red State in Component monitoring,
    Error: Details for 'Is the Adapter Engine Running?'
    Response from Adapter Engine: Fatal ArchiveJob (Archiving) failed.(Details: Code: MS.JOB.ARCHIVE; Location: com.sap.engine.messaging.impl.core.job.executor.ArchiveExecutor; Reason: java.io.IOException: The HTTP request of command "MODIFYPATH" did not reach the XMLDAS. This may indicate that the credentials for the HTTP destination have expired.; Time: 31.03.2011 00:00:05)Response from Adapter Engine: Fatal ArchiveJob (Archiving) failed.
    2) If I click, any one of the option like Communication Channel monitoring, Engine Status etc, I'm getting the error
    "Internet Explorer cannot display the webpage"
    It seems to be the URL to open these component(Communication Channel monitoring, Engine Status etc ) is wrong. Fromwhere the URL address is taken? Where we need check the host name??
    I searched in sdn, but could not find any related topics.
    Kindly help me resolve this issue ASAP.
    Thanks & Regards,
    Baskaran K

    Hi Baskaran,
    For 1), did you check if the XML DAS communication user (used in destination "DASdefault") is configured correctly according to the documentation http://help.sap.com/saphelp_nwpi71/helpdata/EN/43/68fac39a363d33e10000000a11466f/frameset.htm and is assigned to the "XMLDASSecurityRole" role?
    And check if you have configured the rules for your Archiving job (Component Monitoring -> Adapter Engine XIE -> Background Processing).
    It seems the archiving does not work because of configuration issues.
    An archiving job without rules means: all messages are relevant for archiving. The delete job will only delete messages which are not relevant for archiving. So it does not do anything in this system. It can lead to the database table keeps growing, if it's the case too.
    You should check the archiving configuration so that the archiving job runs successfully.
    If you do not want to archive the messages, please deactivate the archiving job. Then the delete job should clean the old messages with the next execution.
    You may delete it straightly on the Background Processing.
    For the 2), "Internet Explorer cannot display the webpage", try using the compatibility mode of your browser.
    Regards,
    Caio Cagnani

  • Error resending messages with system-error in Adapter Engine

    Hi all,
    We got an error when trying to resend all messages in error in runtime workbench, message monitoring, adapter engine, database (overview), clicking on a sender service with messages in error state, and clicking on "repeat" button to resend those in error messages. The error is "No authorization to execute action for component Adapter Engine XP0". The user We are using to perform this task is associated to all groups available in CUA... some of you has any tips about how to perform this operation?
    regards.
    roberti

    I really don't remember what solved this problem, but it is solved. Now the functionality works as it should.
    Regards.
    Waldemar Roberti

  • Error in Adapter Engine

    Hi Experts,
    In the Component Monitoring, the ADAPTER ENGINE have a RED status, show the message:
    Details for Ping Status
    Message: Cannot construct correct URL for runtime check using entries in SLD for component af.pid.<hostname>; correct entries in SLD
    Stacktrace:
    com.sap.aii.rwb.exceptions.OperationFailedException: Cannot construct correct URL for runtime check using entries in SLD for component af.pid.<hostname>; correct entries in SLD
    at com.sap.aii.rwb.core.XIJavaRTCComponent.getConnector(XIJavaRTCComponent.java:188)
    at com.sap.aii.rwb.core.XIRTCComponent.ping(XIRTCComponent.java:209)
    at com.sap.aii.rwb.web.componentmonitoring.model.CompTestModel.doPing(CompTestModel.java:581)
    at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.doPing(CmDynPage.java:425)
    at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.updateTests(CmDynPage.java:525)
    at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.selectNode(CmDynPage.java:552)
    at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.process_treeClick(CmDynPage.java:481)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    Any idea.
    Tks in advance.

    Hi Pedrão, how are you?
    Look at Exchange Profile, if the entries about RWB are the same the entries in the SLD.
    You can confirm the Technical System type Process/Exchange Integration and its application system is right.
    Follow link about troubleshooting guide:
    http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/b0458509-49c1-2a10-1188-af2aeb97ed9a
    Regards.
    Bruno

  • SYSTEM ERROR IN ADAPTER ENGINE

    HI experts,
    i have the scenario proxy ->xi--->third party
    when i am trying to send the message from RWB->Adapter engine----->testmessage
    it shows the following error in the communication channel
    2011-04-13 03:35:13 Information The message was successfully received by the messaging system. Protocol: XI URL:
    2011-04-13 03:35:13 Information Using connection SOAP_http://sap. Trying to put the message into the receive queue.
    2011-04-13 03:35:14 Information Message successfully put into the queue.
    2011-04-13 03:35:14 Information The message was successfully retrieved from the receive queue.
    2011-04-13 03:35:15 Information The message status was set to DLNG.
    2011-04-13 03:35:15 Information Delivering to channel: CC_Channel
    2011-04-13 03:35:15 Information SOAP: request message entering the adapter with user J2EE_GUEST
    2011-04-13 03:35:15 Error SOAP: call failed: java.net.UnknownHostException: hostname/port
    2011-04-13 03:35:15 Information SOAP: sending a delivery error ack ...
    2011-04-13 03:35:15 Information SOAP: sent a delivery error ack
    let me what i need to do for this
    thanks in advance
    Edited by: katakoti on Apr 13, 2011 2:53 PM

    Hi
    thanks for your reply
    i am able to send the data to that url through soap but when i am trying to use the xi to send the data it shows that error
    1 .let me how we ping the host of that webservice in xi server
    when i am using the proxy host and port it shows another error
    SOAP: call failed: java.net.ConnectException: Connection timed out
    so please advice me what actions will taken by the network guys
    thanks in advance
    Edited by: katakoti on Apr 14, 2011 1:20 PM

  • Adapter Engine alerts: Error in Adapter Engine

    Hi All,
    I have configured Alerts for <b>Adapter Engine</b>.
    I am getting alerts with Alert Text as follows during Scenario runs - XML File to ABAP Proxy Scenario (Average size of files is in MB's) daily.
    1.Error: DeliveryException: Problem inserting 6204b980-2f9d-11dc-9262-001635731444(OUTBOUND) into the database: com.sap.engine.services.dbpool.exceptions.BaseSQLException: Connection is invalid.
    2.Error: com.sap.engine.services.ts.exceptions.BaseSystemException: Exception ( SAP J2EE Engine JTA Transaction : [c1e757e003475] ) in rollback.
    This error comes just <b>momentarily</b> and Messages (Files) are processed Successfully (No System Errors,etc at Adapter Engine).
    I am not able to figure out the reason for this exception.
    Expecting your valuable inputs.
    Thanks.
    Regards,
    Sudharshan N A

    Hi,
    This happens sometimes when the adapter engine is on heavy load. Since the message is asynchronous, it is persistent. So it tries to write the message onto teh backend DB on which XI is involved. When teh load is more on the AE, the communication sometimes fails for a few milli seconds. This happens at times. Once it has enough capacity, it again preocesses the message successfully. It also happens sometimes that the message content will be lost. As of now, i am not sure if there is any solution for this.
    reward if helpful.
    Thanks,
    sarath.

  • Exporting processed messages from adapter engine monitoring to excel

    Hey experts,
    I have some messages that are processed successfully. I can see them in the message monitoring for adapter engine in the RWB. I want to know if there is a way to export these messages to excel file.
    Also we have a files archived by PI with a .001 extension attached to them. Is there a way to open these files and look at the processed messages?
    Any help would be greatly appreciated.
    Regards.

    I can see them in the message monitoring for adapter engine in the RWB. I want to know if there is a way to export these messages to excel file.
    I don't think so.But you can right click.Select View Source.And then save the message in a notepad.
    Also we have a files archived by PI with a .001 extension attached to them. Is there a way to open these files and look at the processed messages?
    I don't get this! You can open these files by doing a right click.Open with wordpad.

Maybe you are looking for