Reg. Error in MIGO transaction

Hi friends,
When I run standard transaction MIGO it is giving dump. Just after entering the Tcode it is giving dump. The following is the error we are getting.
*Syntax error in program "SAPLVBDOCUBATCH_DM ".*
Detail description:
Error in the ABAP Application Program
The current ABAP program "SAPLMIGO" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPLVBDOCUBATCH_DM " in include
"LVBDOCUBATCH_DMU25 " in
line 139:
"You can only use the COLLECT command in a table if all of its non-key "
"fields are numeric (type I, P, or F) . . . . . . . ."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "SAPLMIGO" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Please look into this and give me your suggestions, Thanks in advance.
Regards,
Chandu.

Hi Venkat,
My BASIS people solved the issue, they applied some patches to the system. Then it got set. You please check with your BASIS team.
Regards,
Chandu.

Similar Messages

Error In MIGO Transaction

While creating MIGO transaction against a PO I am getting this error continously
PL Stock in transit exceeded by 12 PC : QS8X20 2100 2110 9000000010
I dont know what to do.??
can any one please tell me how to get rid of this error.

Hi
But after creating PO when i am checking ME2M for the particular material i cannot see the PO number generated at ME21N
I still unable to understand where the problem lies
See for a while forget about ME2M and check you PO in ME23N T-code you are getting your Po or not
IF not then while saving PO,system giving any message to you?
Regards
Kailas Ugale

Reg Dump in MIGO Transaction

Hi all,
When I am executing MIGO transaction in Pre-Production I am getting error as 'GETWA_NOT_ASSIGNED'. IF I check thru ST22, showing message as 'Field symbol has not yet been assigned'. Could anybody please assist in this regard.Thanks in advance.
Thanks & Regards.
I. Reddy Prasad

Hi
Pls check the following notes
Note 496258 - MIGO: ABAP runtime error GETWA_NOT_ASSIGNED
Note 712454 - MB1B/MIGO aborts with GETWA_NOT_ASSIGNED
Note 979013 MIGO: Programmabbruch GETWA_NOT_ASSIGNED in LMIGOKC2
Note 379448 GETWA_NOT_ASSIGNED for return delivery with MIGO
Note 965675 MIGO: Termination after setting OK flag for tied empties
Pls take opinion from SAP / Basis before implementing the note
Regards
Madhan

Error with MIGO transaction

Dears,
I receive this error while doing MIGO "Transaction type is a mandatory field". Please advise in which field i can put the transaction type.
Thanks in advance,

Hi,
it is custom Message number. Please take Abaper help to understand when it is called in MIGO transaction.
Regards,
Srikanth P.

Runtime Error in MIGO Transaction

Hi all,
I am getting error in MIGO i.e. TABLEVIEW_NOT_FOUND_IN_SCREEN. Short text: Table view "TV_GOITEM " does not exist in screen 8200. Error analysis: The screen 8200 of program "SAPLMIGO" specified in the CONTROLS declaration of the table view "TV_GOITEM " contains no description for this element.
Thanks in Advance

Hi,
Please take assistants from SAP if ur client/company have serivces from SAP for the Product.
They will suggest you to track this as the error is from Standard Program
In case if you need to apply SAP OSS Notes related to the Issue/Error for the Trxn, they will guide you
in the right direction.
Thanks & Regards,

Reg:Error during migo

While doing migo i'm getting the below error
"Excise invoice items are os different register types "
Regards,
vvk

Hello,
The items in MIGO, will be declared as Assets/tools/consumables and Raw materials.
Please make sure that all should be of the same register types, ie Assets/tools/consumables (RG23C) and Raw materials (RG23A).
Go to J1ID and check for the materials in the MIGO. All materials in the MIGO should be either declared as Assets/tools/consumables or all should be Raw Materials.
Regards

Reg:Error druing migo

Hi all
Could some one tel y i'm getting the below mentioned error while doing migo for *** duty scenario/traders scenario
"Enter a valid shipfrom vendor with excise details"
Regards
vkk

hi
please check your material/vendor/plant is excisable . if so check whether excise invoice is created.

MIGO Transaction Error

Dear All,
             We are facing error in MIGO Transaction,after applying
PATCHES In Development Server.
The Particular Include-Program which is containing Data Variables after
application of Notes was resetted.That Include program is not allowing
to change also.It is giving following message.
Carry out Modification Comparision for REPS LJ1IEXTOP First.No changes Possible.
    Please give suggestion accordingly.
Thanks and Regards
   BalaNarasimman.M

Hi BalaNarasimman,
Normally after applying the patch try to do SPAU adjustment and retain the latest code (i,e If you have applied notes that is for latest package)..Else the OSS notes relevant to the package must be searched and it must be applied again. What is the error that you are getting..? What is the CIN package?
Thank You.
Regards,
Uma

GETWA_NOT_ASSIGNED - Runtime Error in MIGO

Dear All
I am receiving GETWA_NOT_ASSIGNED - Runtime Error in MIGO transaction for a particular user only in production system. I am not able to narrow down is this transaction specific or user issue. I searched the forum and not able to get reason. If someone knows about ths kindly give me a hint.
Regards,
Venkat

Hi,
Please check if any User Exit BADI implemented and have a look into below thread
Reg Dump in MIGO Transaction
GETWA_NOT_ASSIGNED run time error_MIGO processing stock transport order
Shiva

Error in FM RV_MESSAGE_UPDATE in MIGO transaction

Hi,
I am facing the the error in FM RV_MESSAGE_UPDATE for MIGO transaction as below:
Report          SAPLMIGO
Transaction     MIGO
Error details   Class:     FPRUNX
Error Number:    102 - No job started
Status : Update was terminated
I have checked in SM13 transaction but I am not able to get the root cause for this error.
Please advice.
Ashish Dholi

Maybe it's the ADSUSER issue, check this:
http://scn.sap.com/message/8210637

Account determination error when i do MIGO transaction

Hi All,
When i post MIGO transaction I get this error.
ACCOUNT DETERMINATION FOR ENTRY INT BSX--3000 NOT POSSIBLE.
Can anybody help me to resolve this issue.
Regards,
Srivatsan

Hi,
Transaction Event Key "BSX" is used for inventory posting.At the time of MIGO Stock/Inventory Account is debited.
Please check your material code. As per the error message the valuation class for your material code should be 3000. Maintain appropriate GL account for Valuation Class 3000 in BSX key.
Use T Code OBYC to view all the transaction event keys. Scroll down to BSX which might be 11 th in the list, and double click on it. You will find a combination of Valuation modifier, Valuation class and GL Account. Please mantain appropriate GL code against valuation class 3000.
If you are not confident enough you can take the help of your MM consultant.
Regards,
Swapnil

Account Determination error during Import MIGO transaction

Dear ppl,
Could any body help me in resolving this issue?
While doing MIGO transaction for import PO, the following error message is surfacing.
- Accoun determination forentry NML______N100______3000 not possible.
Its not at all showing the accounting key. OBYC setting for all relevany accounting keys are correct. I have checked multiple times.
- At the time of MIGO, commercial invoice no. against customs duties MIRO is being referred to, but this error is coming at the time of posting.
Regards,

Hi There,
The majority of the times the error M8147 is raised, is due to a missing entry for one of the the following within table T030.
"Account determination for entry A B C D E not possible"
Please check in transaction OBYC and maintain an entry for the transaction key in question :
A Chart of Accts    : KTOPL
B Transaction        : KTOSL
C Val.Grpg Code    : BWMOD
D Acct modif          : KOMOK
E Valuation Class   : BKLAS
Best Regards,
Elaine.

While doing MIGO transaction system showing error: Check table169P the entr

Hi experts,
while doing MIGO transaction system showing error: Check table169P the entry BP01 does not exit.
pls do needful.
Thanks&Regards
sreenivas.p

Hi,
Please specify Whether you are doing Blocking of Invoices or what?
As the T169P is A Parameters Invoice Verification, so you can check the values for T169P table in SE16 so that you will get Clear idea regarding company code BP01 in which the stochastic block is active with Threshold value for stochastic block...
Please check....
For maintaining Entries please go to OMRG maintain Company code and Threshold value as per client requirement so that This will specifies the degree of probability that an invoice is stochastically blocked.
Regards,
Ninad Kshirsagar

Error in BED in MIGO transaction

Hi Experts,
The BED is getting populated for 1No. only. It is not getting multiplyed with the GR quantity. We are using TAXINJ and
please guide me how to resolve this.
Thanks
Ganesh

Hi,
Thanks for your quick reply, I have maintained tax code in PO, rate in FTXP & J1ID. Is it required to maintain in FV11/13 for TAXINJ procedure?
BED is coming to MIGO transaction for 1 quantity only. It is not getting muliplied by the GR quantity.
Thanks
Ganesh

Reg: How to add new tab strip in MIGO transaction

Hi Experts,
I need to add a new tab strip(Inside one selection screen, If the user clicks the new tab strip, New selection screen should populate) in MIGO transaction after pressing enter for the movement type '122'.
I tried with the BADI MB_MIGO_BADI, Simply i called the module pool program inside that BADI, But it is not giving any solution.
Please guide me to find the solution for this requirement.
Regards
Vijay.R

Hi,
You may also try the exits available with the MIGO transaction. To find exits you can use the fillowing code by giving tranasaction code as input.
REPORT zrmexitfinder                               .
TABLES: modsap, modact, tstc.
PARAMETERS: input1 LIKE tstc-tcode DEFAULT ' ',
            input2 LIKE modsap-typ DEFAULT ' '.
DATA: search1(6),
      search2(3),
      search3 LIKE modsap-member.
DATA : first_row VALUE 'Y'.
CONCATENATE: '%' input1 '%' INTO search1,
'%' input2 INTO search2.
SELECT * FROM tstc WHERE tcode LIKE search1.
first_row = 'Y'.
CHECK tstc-pgmna NE space.
CONCATENATE '%' tstc-pgmna '%' INTO search3.
SELECT * FROM modsap WHERE typ LIKE search2
AND member LIKE search3.
    SELECT SINGLE * FROM modact WHERE member = modsap-name.
    IF first_row EQ 'Y'.
      WRITE: /0 tstc-tcode, 6 tstc-pgmna, 16 modsap-name, 32 modsap-typ,
             45 modsap-member, 70 modact-name.
      first_row = 'N'.
    ELSE.
      WRITE: /16 modsap-name, 32 modsap-typ, 45 modsap-member, 70 modact-name.
    ENDIF.
    CLEAR : modsap, modact.
ENDSELECT.
IF sy-subrc NE 0.
    WRITE : /0 tstc-tcode, 6 tstc-pgmna, 30 'No exits found'.
ENDIF.
CLEAR tstc.
ENDSELECT.
END-OF-SELECTION.
CLEAR: search1, search2, search3.
Regards,
Renjith Michael.

Reg. Error in MIGO transaction

Similar Messages

Maybe you are looking for