Reg:Error message in MIGO Transaction
Hi All,
I added the new tab strip in MIGO Screen. now i need to make all the fields as mandatory. so using BADI (MB_MIGO_BADI) i gave the mandatory check ( if the Zfield = ' ', then error message) while clicking the check button before posting the material number. But it prevents to proceed further, simply it skips the transaction because of error message. and at the same time 'i should not use the information message'. my requirement is 'Error message should be populated after clicking the check button but it should allow to enter the mandatory fields after the error message'. i.e it should not skip the transaction after the error message.
Please help me.
Thanks & Regards
Vijay.R
Hi
Probably the message is called dynamically, so u should try to check by debug when that message is raised.
U can set a break-point for the statament MESSAGE.
Max
Similar Messages
-
How to Find Location of Error Message in MIGO Transaction
I keep getting an error in transaction MIGO: Create account N450010 for 08/07/2007 as a cost element in controlling area BFP1. According to the functional person the account has been created. Any other way to find out besides a "where-used" on the message class and number to find out where this message is coming from? The where used is not bringing me any results.....Thanks.
Hi
Probably the message is called dynamically, so u should try to check by debug when that message is raised.
U can set a break-point for the statament MESSAGE.
Max -
Error message when running Transaction Code = ME84
hi,
i am getting an error message when running Transaction Code = ME84
Error is 'No processing (error message P5 017), No data for chosen selection'
can someone please guide me on this ?Hi Mahendra,
There are several reasons for the release not happeneing.
1. The issue could be in the selection of release type
2. Scope of selection
3. Strategy profile
Please check whether the selection parameters are considered are right for release to happen.
Regards,
Harish -
Display error messages in Call transaction
Hi Gurus,
I have donme BDC using call transaction..can anybody help me in displaying the error messages in call transaction..
A detailed code wud be very much helpful..
full marks wud given
regards
Sahilhi check this,
PERFORM Z11_BDC_VA02.
ELSE.
MESSAGE I013 WITH TEXT-013.
ENDIF.
ELSE.
CLEAR V_FLAG.
MESSAGE E012 WITH TEXT-012.
ENDIF.
FORM z11_bdc_va02 .
*COVER 1
perform bdc_dynpro using 'SAPMV45A' '0102'.
perform bdc_field using 'BDC_CURSOR'
'VBAK-VBELN'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'VBAK-VBELN'
wa_head_detail-vbeln.
*COVER 2
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=T\03'.
perform bdc_field using 'BDC_CURSOR'
'RV45A-MABNR(01)'.
*COVER 3
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=ITNE'.
perform bdc_field using 'BDC_CURSOR'
'RV45A-MABNR(01)'.
*COVER 4
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=SICH'.
perform bdc_field using 'BDC_CURSOR'
'RV45A-KWMENG'.
perform bdc_field using 'VBAP-MATNR'
wa_head_detail-matnr.
perform bdc_field using 'RV45A-KWMENG'
v_kwmeng.
perform bdc_field using 'VBAP-VRKME'
wa_head_detail-meins.
*COVER 5
perform bdc_dynpro using 'SAPLSPO2' '0101'.
perform bdc_field using 'BDC_OKCODE'
'=OPT1'.
call transaction 'VA02' using it_tab1 mode 'A' UPDATE 'S' MESSAGES INTO
IT_TAB_ERROR.
"CAlling transaction with all screen
Loop at it_tab_error.
if it_tab_ERROR-MSGTYP = 'E' .
clear v_flag.
message I014 with TEXT-014.
else.
clear v_flag.
message I019 with TEXT-019.
endif.
endloop.
refresh it_tab1.
clear V_KWMENG.
ENDFORM. " z11_bdc_va02
Reward if helpful,
Gaurav J.
Edited by: GAURAV on Feb 4, 2008 9:10 AM -
Hi Gurus,
I am using a BADI MB_DOCUMENT_BADI implementation.
At the MB_DOCUMENT_BEFORE_UPDATE method, I am doing a call transaction at VT02N.
I need put one message at MIGO transaction, that shows when VT02N call transaction was not succesfull.
This badi doesn't have any returm messages parameters.
Does anyone knows how can I return those messages to MIGO?
I think that I can use EXPORT TO MEMORY, but I don't know where can I import and use.
Thank you all.Done.
-
Error message "no accounting transaction variant assigned for FB60//GL"
Hi Friends,
I created a new document type for GL postings in ECC 6.0. I tried to post a document for this document in FB60.. It displays the error message "no accounting transaction variant assigned for FB60//GL". Can anyone help me solve this problem.
Thanks
RamyaYou need to do the settings as follows:
Go to extended document splitting- define business transaction variant
Here u need to do series of settings.
Pl check your settings here -
Account Determination error during Import MIGO transaction
Dear ppl,
Could any body help me in resolving this issue?
While doing MIGO transaction for import PO, the following error message is surfacing.
- Accoun determination forentry NML______N100______3000 not possible.
Its not at all showing the accounting key. OBYC setting for all relevany accounting keys are correct. I have checked multiple times.
- At the time of MIGO, commercial invoice no. against customs duties MIRO is being referred to, but this error is coming at the time of posting.
Regards,Hi There,
The majority of the times the error M8147 is raised, is due to a missing entry for one of the the following within table T030.
"Account determination for entry A B C D E not possible"
Please check in transaction OBYC and maintain an entry for the transaction key in question :
A Chart of Accts : KTOPL
B Transaction : KTOSL
C Val.Grpg Code : BWMOD
D Acct modif : KOMOK
E Valuation Class : BKLAS
Best Regards,
Elaine. -
Error Message in through transaction OVA2
Hi All,
In the transaction OVA2 for the Incomplete procedures, we have a warning message set. We want to set a error message instead. Like if there is an Item with prize 0 the system now displays a warning message( as per setting in OVA2) we want to convert this warning to error.
Can any one please help me on this issue.
Thanks and Regards,
Nimisha Deshpande.Normally the incompletion log will be filled when some constraints (set through customising) are not met. For instance, you can set up a constraint that certain fields are required (allthough visibly not required on the screen). SAP will check that field and when it's empty, an entry in the incompletion log is created.
From the incompletion log the user can navigate to the point of error and correct the error.
Maybe this is overdone for your requirement, but it's just an idea. -
Regarding error message from a transaction
Hello all,
I have a scenario where i need to collect all the error message from a trasaction and display it in a pop up.
i am calling a function module and inturn calling transaction 'FB08' using bdc. i may get one or more error message. if there are more than one messages from my function module then i need to display this messages in a popup.
Currently i am displaying one message using 'message ID' syntax at the bottom. what should i do to display error messages in a popup if there are more message
Thanks,
Raju N.use following fm.
CALL FUNCTION 'COPO_POPUP_TO_DISPLAY_TEXTLIST'
EXPORTING
TASK = 'DISPLAY'
titel = 'Creation Log'
IMPORTING
FUNCTION =
TABLES
text_table = i_documents_log. -
Error message in ME22n transaction
Hi All,
We want to display error message at status bar of me22n transaction for some certain conditon.I am using a user exit where actually i am writing a code.I tried to write like this 'Message E101(ZE) ' but message is not displaying at status bar.
Thanks
MohitHi ,
1 >If message is not getting shown at status bar then is it getting shown as popo up. ?
2 > If message is not at all getting shown then that means your exit is not getting called. Please put a break point inside your exit and exeute me22n and see if your debugger gets triggered.
If Debugger does not get triggered then that mean , either you have not created Project for yoour Exit OR you are using incorrect Exit.
Please revert with your observatins so that can help you further.
Hope this is helpful.
Regards,
Uma Dave -
Display Error Message in Co11n Transaction
Hello Experts,
I am using co11n transaction, While saving the transaction i need to display a
error message based on some conditions. I can display a error message but the screen got struck
and it is not returning to the PBO again. Can any one tell me the any Exits is available there in the transaction to display the error messages.
ThanksHai,
krupa, what u have to do is, u r using a screen exit right? Dont display the error message inside
the Function Exit. Instead, in the PAi module inside chain endchain of ur screen double click on your module and include the module in the TOPINCLUDE of the Main program( How to find this top include is goto se80-->
select function group XCOF--> EXPAND INCLUDE->LXCOFTOP -
>ZXCOFTOP----->DOUBLE CLICK and open it and put your module here and display ur error message. )
set the breakpoint here it will stop here
Regards,
Viverk
Edited by: vivek selvam on May 12, 2009 8:36 PM -
Is it possible to retrict some type of error message in SMQR transaction
Hi experts,
I have a requirement when I use EOIO queue from the HTTP adapter (URL) to post the RFC requests and i need to automatically retry the posting of errored entries in the queue and i could find the web logs that SQMR is the transaction used for automatic retry and also the program RSQIWKEX is can be scheduled to try the reposting of the queue. Now i dont want to repost all the error messages( some thing related to application failure in R/3 needs changing of data ), so it is possible to retrict those transactions from re post ?. Or we need to cutomize this program RSQIWKEX in R/3 to get this job accomplished.
Quick response would be highly helpful.. THanks in advance.
Regards,
Rajesh Kumar Tvery specific to smqr , yes, u need to go for customization.
-
How to track error message when calling Transaction: va02
Hi all,
As we all know, when we change an order through T-Code: VA02, system will update modified data to corresponding database. Meanwhile, if our operate is not legal or incorrect on T-code: VA02, system will call corresponding error messages to us.
Now I want to know:
1. how to track the error messages
2. Is there any Tcode such as: SM21 that we can see the message logs after our operation?
Thanks.Hi ,
message table for call transaction
DATA: BEGIN OF G_T_MSG OCCURS 0.
INCLUDE STRUCTURE BDCMSGCOLL.
DATA: END OF G_T_MSG.
Exucute transaction via Call Transaction
CALL TRANSACTION 'FB01'
USING g_t_bdcdata
MODE g_l_mode
UPDATE 'S'
MESSAGES INTO g_t_msg .
errors will be stpored in the table g_t_msg ..
Thanks . -
Error Message in VT02N transaction
Hi Friends,
I need to validate some of the input field values in VT02N transaction. If the validation fails, i need to raise an error message.
I have found the user exit to perform the validation. Now the problem is, after raising the error message, the fields are not getting opened for input. How can i make it open for input.
Plz advice opn this. replays will be awarded with points.Normally the incompletion log will be filled when some constraints (set through customising) are not met. For instance, you can set up a constraint that certain fields are required (allthough visibly not required on the screen). SAP will check that field and when it's empty, an entry in the incompletion log is created.
From the incompletion log the user can navigate to the point of error and correct the error.
Maybe this is overdone for your requirement, but it's just an idea. -
Error message: F3029 - FBZP transaction
Hi Guys,
Let me know if someone how to figure out this issue.
I am trying to delete some entries on FBZP transaction - bank determination - bank accounts, but I got the error message:
F3029 - Clearing acct only allowed for an outgoing bill of exch.pmnt.
Thanks
Daniel Dortahi
kindly check if for payment methods which represent 'outgoing payment by bill of exchange' the clearing account needs to be mentioned. otherwise the clearing account need not be mentioned.
thanks
eashwar
Maybe you are looking for
-
My brother gave me his old iphone when the touch screen went out on mine. It's in great shape but when I received it, it says that it needs to be connected to itunes to be restored. I have done this and it goes through the whole process then says i
-
I have double ID's for Itunes. How can I keep all my music and get rid of the ID that I do not want. It was an issue when I tried to transfer music .. I contacted Itunes and they BARELY helped me get the music back. They also would only allow me
-
How to remove credit card details from Windows azure account?
Hi friends, I Just want to remove my credit card details from my windows azure account. Is there any possiblity or else i just want to delete my account. Plz help me. Thanks dvishnu
-
Where can i buy a new display for my iPhone 4?
My display (juste the lens) has broke. It can be fixed? Where can i buy a new one? Anyone knows if the white display fits on the black iPhone 4? Tks from Brazil
-
ESS Problem ------ Under Benefits and Payments
Hi All, I am facing problem in EP under Benefits and Payments <b>Benefits and Payment -></b> Salary Statement (Needs to appear as the Landscape form instead of Portrait form). how it will be done <b>Benefits and Payment -></b> Salary Statement i need