Reg : Error While Configuring Weblogic Using :11.1.1.6 for SOA
Hi team,
following is the error iam getting while configuring weblogic server for SOA
OS : Win XP SP3 : SOA Version : 11.1.1.6
Component Schema=SOA Infrastructure
Driver=oracle.jdbc.xa.client.OracleXADataSource
URL=jdbc:oracle:thin:@localhost:1521/xe
User=DEV_SOAINFRA
Password=***
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='SOAINFRA' and version='11.1.1.6.0'
ORA-00604: error occurred at recursive SQL level 1
ORA-01882: timezone region not found
CFGFWK-60850: Test Failed!
Component Schema=User Messaging Service
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@localhost:1521/xe
User=DEV_ORASDPM
Password=***
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='ORASDPM' and version='11.1.1.6.0'
ORA-00604: error occurred at recursive SQL level 1
ORA-01882: timezone region not found
CFGFWK-60850: Test Failed!
Component Schema=OWSM MDS Schema
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@localhost:1521/xe
User=DEV_MDS
Password=***
SQL Test=select 1 from schema_version_registry where
owner=(select user from
dual) and mr_type='MDS' and
version='11.1.1.6.0'
ORA-00604: error occurred at recursive SQL level 1
ORA-01882: timezone region not found
CFGFWK-60850: Test Failed!
Component Schema=SOA MDS Schema
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@localhost:1521/xe
User=DEV_MDS
Password=***
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='MDS' and version='11.1.1.6.0'
ORA-00604: error occurred at recursive SQL level 1
ORA-01882: timezone region not found
CFGFWK-60850: Test Failed!
Please provide your comments.
Sridhar
Have a look at this...
http://www.smartmarmot.com/2011/10/workaround-to-the-issue-ora-01882-timezone-region-not-found-when-connection-to-oracle/
In your case your still running the installer... So you'll probably have to set the option on your JVM directly...
Cheers,
Vlad
Similar Messages
-
Reg:: Error while XI Transport Using CMS
Hi! SAP Gurus,
I am trying to transport XI Integration Design and Configuration Objects from X42 (DEV) to X44 (Quality).
I want to transport Transport ID Design:5909a730a2fe11dcc8dd001125e7370c
Configuration: 1c3d0c90a30111dcb2c0001125e7370c
I was succefully transported the Design object but while I am transporting the Configuratio Object at First I am moving from X42- CMS and then from CMS-X44.
<b>ERROR 1 ::</b> But once I am Exporting I am getting an acknowledgement message and finally it was moving to CMS. But there in Consolidation TAB it was coming<b> IMPORT FAILED.</b>
But when I tried 6-7 times I sended it successfully and there that objects first went (sits) directly in Change lists of quality server ID Part. From change lists I am transferring to Scenarios by Right clickTransport.
<b>ERROR 2</b>: According to CMS some parameters will be lost in communication channels and in some other objects. while transporting using CMS.
<b>How to recollect that parameters again ?</b>
Will you please confirm simply copying the parameters from Development server and again editing or Is there any other method?
<b>ERROR 3:.</b> While I am activating any object in Configuration object I am getting the error
<b>
Unable to move object. Change lists were not part of the same import</b>
Kindly Solve this issue and If Possible send me a brief note and complete procedure of
HOW TO TRANSPORT XI REPOSITORY AND CONFIGURATION OBJECTS USING CMS FROM DEVQAPROD SERVERS?
Hi! Gurus,
My Main Problem is :::
After Exporting from DEV---->CMS---->Quality it will goes to Change Lists of Quality Server QA and after that I am transferring them to Scenarios TAB by Right Clicking --> and Press Transfer..
<b>Problem::: </b> After that When ever I am trying to activate they are not activating I am getting the error::
<b>
Unable to move object. Change lists were not part of the same import</b>Hi! Gurus,
If you have any material with screen shots and also the solution to the above problem kindly send to my Mail ID::[email protected]
Thanks::
Amar Srinivas Eli. -
Error while configuring weblogic workshop application to cruise control.
Hi,
I have a web application which is created through weblogic workshop 9.2 and want to configure it to cruise control.
In that process, i had to change the web app to ear application and created build.xml for configuring it to cruise control
but I'm getting the following error.
It would be great if anyone could resolve the issue.
copyConfiguration:
[echo] No configuration directories specified
createWorkspaceXML:
[echo] Running createWorkspaceXMLFile
checkout:
build:
[echo] Compiling using /home/cocbad/wlp92-projects/SearchApp/src/SearchApp/SearchApp/build.xml
init.env:
check.params:
check.versions:
init.typedefs:
[echo] Using Workshop Libraries located in the "../SearchApp/ant-build-lib" directory.
Trying to override old definition of task for
Trying to override old definition of task jspc
init:
[mdimport] The workspace is missing the definition of the "BEA WebLogic Server v9.2 JRE" Java VM, which is referenced by a project.
BUILD FAILED
/home/cocbad/wlp92-projects/SearchApp/SearchApp_build.xml:20: The following error occurred while executing this line:
/home/cocbad/wlp92-build/build_app.xml:44: The following error occurred while executing this line:
/home/cocbad/wlp92-build/build_tasks.xml:110: The following error occurred while executing this line:
/home/cocbad/wlp92-projects/SearchApp/src/SearchApp/SearchApp/build.xml:74: Metadata import failed!
Total time: 8 seconds
Thanks & Regards,
SwapnaHi,
Issue is resolved.
Value for property "aia.jdev.lib.dir" was missing in my build.xml.
Regards,
UJ -
Error while configuring WebLogic Server Resources for PIP.
Hi ,
As per the documentation I am able to build all PIP cartridges.
But while creating resources on weblogic I'm getting below error in build file.I'm following same instuction as per document.
Unknown argument: -Daia.jdev.lib.dir= setupJPSPolicy
Buildfile: E:\osm-workspace\OracleCgbuOsmAIAInstallation\OSM.AIAInstallation.xml
BUILD SUCCESSFUL
Total time: 2 seconds
2.
. Unknown argument: -Daia.jdev.lib.dir= setupPIPUsers
Buildfile: E:\osm-workspace\OracleCgbuOsmAIAInstallation\OSM.AIAInstallation.xml
BUILD SUCCESSFUL
Total time: 781 milliseconds
Is I’m missing some configuration in eclipse?
I'm using below version.
1. OSM-7.0.3
2. Design studio-7.2.0.0.0
Regards,
UJHi,
Issue is resolved.
Value for property "aia.jdev.lib.dir" was missing in my build.xml.
Regards,
UJ -
Error while migrating users using CSSImportExportUtility
Error while migrating users using CSSImportExportUtility
I'm tring to export all user and group information from a Hyperion Shared Services 9.2.1 by using CSSExport.bat
When there was only native directory in HSS, i can export these information successfully.
But when I enabled NTLM external user authentication following error occurred:
Exception in thread "main" java.lang.UnsatisfiedLinkError: getOSVersion
at com.hyperion.css.spi.impl.ntlm.NTLMProvider.getOSVersion(Native Metho
d)
at com.hyperion.css.spi.impl.ntlm.NTLMProvider.<clinit>(Unknown Source)
at com.hyperion.css.spi.impl.ntlm.NTLMConnectionClient.getUsers(Unknown
Source)
at com.hyperion.css.CSSAPIExtnImpl.getUsers(Unknown Source)
at com.hyperion.css.CSSAPIImpl.getUsers(Unknown Source)
at com.hyperion.css.CSSAPIImpl.initialize(Unknown Source)
at com.hyperion.css.exchange.NativeProviderManager.<init>(Unknown Source
at com.hyperion.css.exchange.ImportExportManager.cssExport(Unknown Sourc
e)
at com.hyperion.css.exchange.CommandUtility.run(Unknown Source)
at com.hyperion.css.exchange.CommandUtility.main(Unknown Source)
I searched reference documents on the web, found this article: (http://download.oracle.com/docs/cd/E12825_01/epm.111/readme/mdm_111110_readme.html)
Troubleshooting Tip: If HSS is configured for an NTLM provider, DRM services may not start due to error: "Exception Emdm_Exception with message 'Could not Initialize CSS. Error: 'getOSVersion'."
You may receive the following error after clicking the "Enable CSS" button in DRM Console: “LoadLibrary("C:\Hyperion\Master Data Management\mdm_ntier_css_validator.dll") failed - The specified module could not be found.”
To resolve both of these conditions, update the Windows System Path on the Data Relationship Management server with the applicable JRE and CSS pathing below.
NOTE: Reboot the Data Relationship Management server machine after making any changes to the Windows Path.
NOTE: Ensure that only one JRE version and one CSS version are referenced in the Windows Path.
? For HSS 9.3.1:
%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin;%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin\client;%HYPERION_HOME%\common\CSS\9.3.1\bin;
? For HSS 9.3.0:
%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin;%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin\client;%HYPERION_HOME%\common\CSS\9.3.0\bin;
? For HSS 9.2.0.3:
%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin;%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin\client;%HYPERION_HOME%\common\CSS\9.2.0.3\bin;
? For HSS 9.2.0:
%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin;%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin\client;%HYPERION_HOME%\common\CSS\9.2.0\bin;
I found these is no directory "%HYPERION_HOME%\common\CSS\9.2.0\bin;" exists but "%HYPERION_HOME%\common\CSS\9.2.1\bin;"
I configured PATH by setting to above, and tried CSSExport again, still failed.
Than I disabled the NTLM is HSS, tried CSSExport again. It was successful.
So I am convinced that the problem caused by NTLM or PATH environment variable or some files associated.
Does anybody know the solution ?I recommend you upgrade at least to 10.1.0.5. 10.1.0.2 comes with the very first version of csalter.plb, which has not the current implementation. From and to which character set do you try to migrate?
-- Sergiusz -
Error while starting weblogic server
Hi, I am getting following error while starting weblogic server
Unexpected Signal : 11 occurred at PC=0x40170bc5 Function name=fill_in_stack_trace__19java_lang_ThrowableG6HandleP6Thread
Library=/bea/jdk131/jre/lib/i386/client/libjvm.so
Current Java thread: at java.lang.Throwable.fillInStackTrace(Native Method) at
java.lang.Throwable.<init>(Throwable.java:78) at java.lang.Error.<init>(Error.java:37)
at java.lang.LinkageError.<init>(LinkageError.java:29) at java.lang.IncompatibleClassChangeError.<init>(IncompatibleClassChangeError.java:29)
at java.lang.AbstractMethodError.<init>(AbstractMethodError.java:30)
Environment : Weblogic 6.0 Sp2 on Linux Red hat 7.1
jdk 1.31
TIA
AshwaniHi,
1)Could you please try logging into sqlplus using using the below command :-
sqlplus "/ as sysdba"
2)Execute the below command to check if the password in expired :-
select username, account_status, expiry_date, where username='MDS username';
3)Change the password if the password has been expired by following the below command :-
alter user <user> identified by <password>;
4)Once the above steps are followed please login into the Weblogic Admin Console and follow the below steps:-
+ Go to DataSources ---> Select the MDS schema ----> change the password which was given in step no.3
+ Restart the Weblogic once again.
5)Lets us know the result.
Regards,
Prakash. -
Hi,
I am trying to install "System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD".
I downloaded install guide & the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=10712
I have followed the installation document & getting an error while configuring VMM for System Center 2012.
error details from log file given below:
01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
01:12:24:StackTrace: at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String& ExportedCertificate, ErrorInfo& ErrorInfo)
at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
01:12:24:InnerException.StackTrace: at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item. Setting rollback.
01:12:24:SetProgressScreen: FinishMinorStep.
01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
I have checked that the following services are running:
1) Verified WS-Management srvice 2) MSSQL server + MSSQL (agent) 3)SC VM Manager Agent 4) Windows management instrumentation .
I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account & it is in local Administrators group.
Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location & install guide.
thanks.
====Have you installed AppController on the same machine with VMM?
-
Getting error while publishing workflow using SP designer for SharePoint 2013
Hi,
I am try to setup Workflow manager for our sharepoint applications.
WF manager set ran without any issue.
I registered the SPWorkflow service which succeeded as well. The Workflow service application shows "Workflow is connected"
I am creating a workflow using sharepoint designer using my credential (not Service account). I am able to save it but while publishing, its prompting with an error.
The error says "Errors were found while compiling the workflow.The workflow files were saved but cannot run." Clicking advanced button show
"Microsoft.SharePoint.SPException: We're sorry, we weren't able to complete the operation, please try again in a few minutes. If you see this message repeatedly, contact your administrator.
at Microsoft.SharePoint.SPScaleOutDatabaseMap.CreateSqlSession(ISPScaleOutDatabaseMapProvider mapProvider, Byte[] compositeKey, Guid forceRefreshVersion, Guid& version)
at Microsoft.SharePoint.SPScaleOutDatabaseCommandExecutor.Execute(ExecuteDelegate operation, ISPScaleOutDatabaseMapProvider mapProvide"
Any help would be highly appreciated
Thanks,Hi,
According to your post, my understanding is that you got error while publishing workflow using SharePoint designer for SharePoint 2013.
Please check whether the Central Admin > Manage Service Application-> “App Management Service” is started.
Please check whether the “Configure service application associations”, ”App Management Service” is already associated.
Then please check whether the “Manage Services on server” and the “App Management Service” is started.
In addition, please try to re-register Workflow Service.
If the issues still exists, please follow the steps in the
Steps to Verify that Server Is Correctly Set Up. After you verified that the server is correctly set up, follow the steps in the
Steps to Troubleshoot Workflow Management Service and
Troubleshooting the Service Bus for Windows Server then retry your action related to publishing workflows
More information:
http://wp.ahcheng.com/2013/03/23/error-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run/
http://sp2013.pro/2013/04/solution-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run-cannot-set-unknown-member/
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
Error while configuring work repository details in topology Manager
Hi,
Could anyone pls advice, is it possible creating more than one Master repository connection for the same instance.
When i try to do so, am getting the below error while configuring the work repository details in topology manager.
“A work repository already exists for this connection.
Enter the repository password to declare it in your Master Repository”
I tried with both the new master and work repository password. But no luck.
Previous Master & work details:
Master: PCS_MASTER
Work:PCS_WORKREP
New Details
Master: PCS_MASTER_INT
Work:PCS_WORKREP_INT
Instance: PCBID
Am trying to create new master repository for PCS_MASTER_INT.In the same oracle schema you can have only 1 master and 1 work repository. Usually they take 2 schema (1 for each).
If you need 2 master repository you have to use 2 different jdbc path. I'm using a db with several master / work, each repo has got its schema.. -
Error while configuring QT--can't capture in FCP HD
I keep getting a message saying "Error occured while configuring QT using the current capture presets, please close FCP and check your hardware configuraton" when I try to capture. All settings are consistent with video output device. I'm upconverting 720p to 1080i and capturing at 1080i 29.97. What else can I do!?!?!?
What are you trying to capture? What format? What capture card are you using?
If you are trying to upconvert HDV via firewire, you can't do that. You can only capture native resolution or lower "offline quality" resolutions. You cannot cross convert or upconvert via firewire.
But that is just a stab in the dark.
Shane -
Error while Configuring environment parameters
Hi,
I am installling Oracle Utilities Business Intelligence 2.3.2 version . I am getting error while configuring Environment Paramameters
Database- Oracle 11g R2
OS- Windows Server 2008
1. Environment Description
Environment Description: DEV01
2. Business Application Server Configuration
Business Server Host: 01HW342889
WebLogic Server Name: myserver
Business Server Application Name: SPLService
MPL Admin Port Number: 6502
MPL Automatic startup: false
3. Web Application Server Configuration
Web Server Host: 01HW342889
Web Server Port Number: 6500
WebLogic SSL Port Number: 6501
Web Context Root: ouaf
WebLogic JNDI User ID: systemjndi
WebLogic JNDI Password: ENC(tEky0TX65m0nDNIlnX
CcwlbnXl2b1kMnvE8DD0wfI1Y=)
WebLogic Admin System User ID: {3DES}gg8gG+5N+gwJBPWG
IhRRuQ==
WebLogic Admin System Password: {3DES}gg8gG+5N+gwJBPWG
IhRRuQ==
WebLogic Server Name: myserver
Web Server Application Name: SPLWeb
Application Admin User ID: appladmin
Application Admin Password: ENC(OrIg4HyDLxi2kQ6uSs
cBz4cubUr2U5BbRl75SY2pP6Q=)
Expanded Directories: false
Application Viewer Module: true
4. Database Configuration
JDBC Name: oubi-jdbc
MPL Database User ID: SPLADMV2
MPL Database Password: ENC(mfG7quacTagw5qEvov
oaQIRpnogRvroY4NcXp6WZCZo=)
XAI Database User ID: SPLADMV2
XAI Database Password: ENC(tNfRJUthvYQR990TzW
314nXU+5jWBuYBDs5AgT5qG7g=)
Batch Database User ID: SPLADMV2
Batch Database Password: ENC(L5BXr/lXp/riShr9Lp
kFDsgUIjDm5I6TJU5Suz0Wy/k=)
JDBC Database User ID: SPLADMV2
JDBC Database Password: {3DES}L43JfrbOrCtupkwm
4I/Adw==
Database Name: DEV1
Database Server: 01HW342889
Database Port: 1701
ONS Server Configuration:
Database Override Connection String:
Oracle Client Character Set NLS_LANG: AMERICAN_AMERICA.UTF8
5. General Configuration Options
Batch RMI Port: 6509
Batch Mode: CLUSTERED
Coherence Cluster Name: OUBICLUSTER1
Coherence Cluster Address: 172.25.138.45
Coherence Cluster PORT: 6508
Coherence Cluster Mode: dev
Each item in the above list should be configured for a successful install.
Choose option (1,2,3,4,5, <P> Process, <X> Exit): P
--> Calculating additional variables ... done.
--> Writing variables to E:\OUBI2\ouaf\temp\FW.V4.0.2\tmp\2011-06-10-0954\ENVIRO
N.INI ... done.
Can't open E:\OUBI2\ouaf\temp\FW.V4.0.2\install_FW_E:\OUBI2\ouaf\DEV01.log for o
utput at E:\OUBI2\ouaf\temp\FW.V4.0.2\data\bin\perllib/SPL/splLog.pm line 190.
"ERROR - Detected while running install.plx."
Thks,
MohanThis is a common error people get when configuring Repository Service in Admin Console...
Main reason for this is that there is an incompatible bit versions of Oracle Database and Informatica Server and windows. Try to reinstall Oracle DB or Infa Server and tryconfiguring the same it will work
Or it could be parameter issues if it is linux...
Please mark helpful this post -
Error While Configuring the Shared Service with Active Directory
Hi All,
I am getting a error while configuring MSAD with Shared Service, when entering the User Id and password and clicking next, the following error is displayed:
"EPMCSS-05180:Failed to validate Security configuration. Failed to connect. Invalid values for Base DN, User DN or Password. Enter valid value(s). Root Cause : [LDAP: error code 49 - 80090308: LdapErr: DSID-0C0903A9, comment: AcceptSecurityContext error, data 52e, v1db1]"
The AD user has the read access to the all users and group in Active Directory. If I use an Active Directory user with Admin privilege, It is getting connected.
But client is not ready to provide the Admin Access due to their internal policy and I also don't have any document which says admin privilege is required. According to the document,the user should have the following privileges only.
"The distinguished name of the user that Shared Services should use to bind with the user directory. This user must have search privilege on the RDN attribute within the DN. For example, in the dn: cn=John Doe, ou=people, dc=myCompany, dc=com, the bind user should have search access to the cn attribute.Special characters in User DN must be specified using escape characters. See “Using Special Characters” on page 46 for restrictions.
Example: cn=admin,dc=myCompany,dc=com
But I am getting confused with the statement "This user must have search privilege on the RDN attribute within the DN". Is it not search privillege?
Can anybody help me with required privilege for Active Directory user to configure with Shared Service.
Thanks in Advance,
SunilThank you All,
i tried connecting using AD Browser from Microsoft, and it went in properly. then i found out that the AD Team here were giving a Wrong Credentials to connect, they Gave me HYP_OID which infact turned out to be a Principal name instead of a 'cn'.
after searching in the AD Browser i found the correct cn which is "Hyperion OID", then it went to the second Screen where now i am trying to search for the Users based on thier Job Nature.
Thank you for all the Support Guys, you both "Celvin" and "John" are the Top Guys under my Search list for any technical Assistance.
Thank you once again Friends....
Regards,
Sunil...
Shantan.... -
Error while Configuring Repository INS0017: Installation of the seeded data
I am getting error while configuring repository at 36%
Error:
Seeding Failed:
The warehouse builder workspace owner installation failed on user OWBSYS.
INS0017:Installation of the seeded data failed java.io.FileNotFoundException:
xmlClasses.xml (Access is denied)
Operating system: Windows 2008 server 64 bit
Database: Oracle 11g Release 11.2.0.1.0 64 bit
Log file is not created in given location(Unified repos)Hi David,
But we have successfully Created the Repository(Using Repository Assistance) using OWB 10.2.0.4 on Oracle 11.1.0.7 Db on Solaris OS.
and i also checked the Metalink it say the OWB 10.2.0.4 can be used with Oracle 11.1.0.7 Db.
Nawneet -
ColdFusion 11 wsconfig.exe -- Error while configuring connector for IIS.
I ran into a problem with my ColdFusion 11 64-bit installation/migration on a Windows Server 2012 R2/IIS 8.5. I was following the ColdFusion 11 Lockdown Guide - Pete Freitag (very helpful) and I ran into problems on page 35 "Run the ColdFusion Web Server Configuration Tool". When I attempted to do this for ALL IIS websites I encountered a Windows error [APPCRASH - Exception Code:c0000005]. Also, note my Administrator-Command Prompt window provided this error message "Error while configuring connector for IIS. Make sure you have administrator privileges". However, I did not experience this error with all of the migrated sites. I traced my steps backward to discover the problem. I used the Microsoft Web Deployment tool (good tool) to migrate the old IIS websites to the new IIS. I utilized Metabase Explorer the IIS 6.0 Resource Tools to discover that some of the migrated sites that were crashing did not have the key/value ID:6006 | Name: DefaultDoc. Once I added this key and redeployed the site the ColdFusion 11 connector (wsconfig.exe) worked fine. In addition, I added this key/value to some of the larger previously migrated sites in IIS 8.5 ("Default Document") and it worked with the connector as well.
Knowing how IIS encapsulates information the DefaultDoc key/value should have passed from the website setting. Why would this make wsconfig.exe crash?
Thanks in advance and I hope this saves someone from hours of research and frustration.DiscoDelight,
Have you forwarded this information directly to the ColdFusion product team? If not, I'll try to draw their attention to it. Only a few of them are active on these forums, so this issue might be overlooked.
-Carl V.
EDIT: I just pinged them on Twitter to take a look at this post.
EDIT #2: They just pinged me back that they are looking into it. -
Hi,
I am getting following error while starting WebLogic Server 7.0 for the first
time. Can anybody help me it this?
Error is:
==================================================
Enter username to boot WebLogic server:system
Enter password to boot WebLogic server:
Starting WebLogic Server...
<May 9, 2003 4:27:47 PM IST> <Notice> <Management> <140005> <Loading configurati
on C:\bea\user_projects\mydomain\.\config.xml>
<May 9, 2003 4:28:04 PM IST> <Notice> <Security> <090082> <Security initializing
using realm myrealm.>
<May 9, 2003 4:28:04 PM IST> <Notice> <WebLogicServer> <000327> <Starting WebLogic
Admin Server "myserver" for domain "m
ydomain">
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot intialize
Resource Manager Connection Factory resour
ces because could not get JNDI context: javax.naming.ServiceUnavailableException
[Root exception is java.net.UnknownHost
Exception: Unknown protocol: 'JNP'] ]
at weblogic.j2ee.RMCFactoryDeployer.<init>(RMCFactoryDeployer.java:50)
at weblogic.j2ee.J2EEService.initialize(J2EEService.java:93)
at weblogic.t3.srvr.ServerLifeCycleList.initialize(ServerLifeCycleList.java:54)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:782)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
<May 9, 2003 4:28:14 PM IST> <Emergency> <WebLogicServer> <000342> <Unable to
initialize the server: Fatal initializatio
n exception
Throwable: weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot
intialize Resource Manager Connection Fac
tory resources because could not get JNDI context: javax.naming.ServiceUnavailableException
[Root exception is java.net.
UnknownHostException: Unknown protocol: 'JNP'] ]
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot intialize
Resource Manager Connection Factory resour
ces because could not get JNDI context: javax.naming.ServiceUnavailableException
[Root exception is java.net.UnknownHost
Exception: Unknown protocol: 'JNP'] ]
at weblogic.j2ee.RMCFactoryDeployer.<init>(RMCFactoryDeployer.java:50)
at weblogic.j2ee.J2EEService.initialize(J2EEService.java:93)
at weblogic.t3.srvr.ServerLifeCycleList.initialize(ServerLifeCycleList.java:54)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:782)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
>
==================================================I don't know what could cause this error.
I would suggest you take this upto [email protected]
Kumar
Ajay Jadhav wrote:
Hi,
I am getting following error while starting WebLogic Server 7.0 for the first
time. Can anybody help me it this?
Error is:
==================================================
Enter username to boot WebLogic server:system
Enter password to boot WebLogic server:
Starting WebLogic Server...
<May 9, 2003 4:27:47 PM IST> <Notice> <Management> <140005> <Loading configurati
on C:\bea\user_projects\mydomain\.\config.xml>
<May 9, 2003 4:28:04 PM IST> <Notice> <Security> <090082> <Security initializing
using realm myrealm.>
<May 9, 2003 4:28:04 PM IST> <Notice> <WebLogicServer> <000327> <Starting WebLogic
Admin Server "myserver" for domain "m
ydomain">
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot intialize
Resource Manager Connection Factory resour
ces because could not get JNDI context: javax.naming.ServiceUnavailableException
[Root exception is java.net.UnknownHost
Exception: Unknown protocol: 'JNP'] ]
at weblogic.j2ee.RMCFactoryDeployer.<init>(RMCFactoryDeployer.java:50)
at weblogic.j2ee.J2EEService.initialize(J2EEService.java:93)
at weblogic.t3.srvr.ServerLifeCycleList.initialize(ServerLifeCycleList.java:54)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:782)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
<May 9, 2003 4:28:14 PM IST> <Emergency> <WebLogicServer> <000342> <Unable to
initialize the server: Fatal initializatio
n exception
Throwable: weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot
intialize Resource Manager Connection Fac
tory resources because could not get JNDI context: javax.naming.ServiceUnavailableException
[Root exception is java.net.
UnknownHostException: Unknown protocol: 'JNP'] ]
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot intialize
Resource Manager Connection Factory resour
ces because could not get JNDI context: javax.naming.ServiceUnavailableException
[Root exception is java.net.UnknownHost
Exception: Unknown protocol: 'JNP'] ]
at weblogic.j2ee.RMCFactoryDeployer.<init>(RMCFactoryDeployer.java:50)
at weblogic.j2ee.J2EEService.initialize(J2EEService.java:93)
at weblogic.t3.srvr.ServerLifeCycleList.initialize(ServerLifeCycleList.java:54)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:782)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
==================================================
Maybe you are looking for
-
MediaSource Organizer problem on Windows
I just installed everything that was on the creative CD that came with my Zen NOMAD Xtra 40gb but ever time I run the MediaSource Organizer and something pops up telling me that there was a problem and then it will ask me if I want to send an error r
-
i have purchased a in app purchase of a 'gcsepod' for my little brother however the purchase does not come up in the app and requests me to buy another. How do i solve this? I have also got the receipt for this purchase.
-
A bug in network sharing with OS X leopard
Hi guys I want to know where I can report a bug with apple I just figure out there is a bug in leopard in the internet sharing network preference, I usually leave the airport on my imac sharing the internet with my ipod touch, but every time I turn o
-
I reset my ipod and the porcess is taking too long who do i fix this
my ipod is jailbroken and i downloaded some thing called sbsetting and it did some thing that made the apps on my ipod to disapear i tried to fix it but no use so i reset it and it is still not done with the process please help
-
Hi, I am an abapper, i am trying to check a BDC for the transaction FB01, in the first screen i get the error message "Posting period <year> not open" Can any body tell me how to find out the correct data to be given in the respective fields. Rega