Reg: Error while transporting from Quality to Production

Hi ,
I am facing a problem while transporting ODS from quality to production.. The same works perfectly when i transport from Dev to quality.
The Error Displayed while transporting is
Start of the after-import method RS_ODSO_AFTER_IMPORT for object type
The creation of the export DataSource failed
Password logon no longer possible - too many failed attempts
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object
The creation of the export DataSource failed
Password logon no longer possible - too many failed attempts
Error when creating the export DataSource and dependent Objects
Error when resetting DataStore Object to the active version
Kindly give me some suggestion ..
Thanks in advance
Regards
Guru

go to the source system RFC connection in SM59 and do a remote login - if you get the login page there then there is an issue with the RFC connection. also check if any other system is using the same RFC.. we had a situation where th R/3 connection was being used by 3 BI instances and everytime we reset the password , another system would lock the sme , ultimately we identified the systems and did a password reset in all the systems and then the issue got resolved.
but then we also faced the same issue you faced and it was related to login issues - check the remote login and that will tell you.

Similar Messages

Error while transporting the TR to production

Dear experts,
I am facing the issue of TR error while transporting it to PRD. I have already checked, the table is active both on DEV & on QUI. What should I do to transport this without any error? Thanks in advance.(Please find attached screenshot.)

Hi,
this looks like you forgot a transport request or have transported in the wrong order.
Check that the table ZPLANTS is active (or has been activated with this transport request in step IMPORT).before the generation starts. Please check also the complete IMPORT protocol.
Regards,
Klaus

Cannot transport from quality to production due to syntax error

Hi all,
I have modified the program in Development system in which i have added on field to the internal table structure. Internal table is declared in the top include of the program. Now the program is transported to the Quality server which ends with the error for top include as"Original object cannot be replaced". But when i check the top include in quality server, the field which i have added is available. Now for transporting to production server, it ends by syntax error saying "The data object ITAB does not have a component called <field>".
Please guide me for the above error.
Thanks & Regards
Akshay Korade

>
Akshay Korade wrote:
> The production system contains the version before the changes and the error comes while transporting to production system. So the changes are not reflected in the production system.
I've been doing SAP for a while and I can tell you, definitively, that syntax errors do not prevent import.
>All the includes are activated and free from syntax errors in quality system.
>Now for transporting to production server, it ends by syntax error saying "The data object ITAB does not have a component called <field>".
If there are no syntax errors in quality, then where is that syntax error showing? It must be in production. It will be an inactive version in production that has the syntax error. Go into production, try to activate the program. Activation will fail because of the syntax error.
You get the syntax error because the defintion has not made it into P. If you transport the whole program, as R3TR PROG zprog, and have the correct flags set on import to overcome the message "Original object cannot be replaced", then your problem will be solved.
matt

Getting DC-broken error while transporting to QUALITY server

hii all,
I have a DC which have been built and deployed fine and giving the perfect output when running on portal. This has been deployed on local server.But while tranporting it to QUALITY server for testing,itz cannot be imported there and giving an error "DC Broken".....!
plz do help out....

Hi
What i believe that the related objects for the BADI are not captured in the Transport.
Pls check the BADi definitions and implementation class included in the Transport.
Hope this helps if so reward.
Thanks
Shyam

0materail error while transport

Hi all,
I get this error during transports from quality to production.Where should I delete data from 0material?in production or quality?
Master Data Table /BI0/PMATERIAL contains data: Characteristic 0MATERIAL cannot be activated
Message no. R7467
Diagnosis
The Master Data Table /BI0/PMATERIAL must be converted incompatibly with an activation of characteristic 0MATERIAL (changes to the key in the table). Table /BI0/PMATERIAL contains data. Parts of this data were lost in the conversion.
System Response
Characteristic 0MATERIAL cannot be activated.
Procedure
Undo the changes that led to the incompatible conversion (the changes in the key) or delete all data from table /BI0/PMATERIAL.

Hi,
If you got the error while importing in to QA system then first you have delete the data in QA then Agian re import to QA Once it done then move it Prd.
or
If you got the error while importing in to Prd system then first you have delete the data in PRD then Agian re import to PRD.
Hope it would help.
Regards,
Satya

Warning MSG : while Transporting a Request to Production

Hi Friends,
 I got folowing errors while transporting a Request to Production -
PART 1 .
+++++++++++++++++++++++++++++++++++++++++++++++++
 NBA Quality Assurance
 Selection for Import 03.05.2006 11:56:02 (0) Successfully Completed
 Import ABAP Dictionary Objects 04.05.2006 08:56:08 (0) Successfully Completed
 ABAP Dictionary Activation 04.05.2006 08:56:14 (4) Ended with Warning
 Import 04.05.2006 08:56:34 (0) Successfully Completed
 Check Versions 04.05.2006 08:56:47 (0) Successfully Completed
 Import steps not specific to transport request
 NBP Nobel Production System
 Selection for Import 04.05.2006 08:56:35 (0) Successfully Completed
 Import ABAP Dictionary Objects 27.06.2006 13:55:12 (0) Successfully Completed
 ABAP Dictionary Activation 27.06.2006 13:55:15 (4) Ended with Warning
 Import 27.06.2006 13:55:36 (0) Successfully Completed
 Check Versions 27.06.2006 13:55:51 (0) Successfully Completed
 Import steps not specific to transport request
++++++++++++++++++++++++++++++++++++++++++++++++++++++
PART 2 - LOG
ABAP Dictionary: Activation
Transport request___: NBDK923224
System______________: NBA
tp path : tp
Version and Release: 340.16.09 640
Program start============================================================
Mass activation
=========================================================================
Process..................: nb13_21
User.....................: DDIC
Date, time...............: 04.05.2006, 08:56:13
Platform.................: CUSTOMER-NBA(620)/DB6/AIX/nb13
Tool.....................: BATCH/RADMASG0
Log......................: F, /usr/sap/trans/tmp/NBDA923224.NBA
Program parameters:
Input medium...............: Transp. request NBDK923224
Activation method..........: Inactv.
Chk. mode..................: T
Version to be activated....: M
Versions to Be Deleted.....: Delete only active versions
Lock against paral. exec...: Shared
Independent statistics log.: being written
Parallel mode..............: Switched on
..Resources................: 50% of Dialog Processes, Maximum 4 Processes
.Costs for Each Task.......: Minimum: 3.000, Maximum: 150.000
=========================================================================
No object to be deleted and activated exists
 =========================================================================
 Mass activation
 =========================================================================
 Process..................: nb13_21
 Return code..............: 4
 Program runtime..........: < 1 sec.
 Date, time...............: 04.05.2006, 08:56:13
 Program end==============================================================
 ABAP Dictionary: Activation
 End date and time : 20060504085614
 Ended with return code: ===> 4 <===
=========================================================================
 Mass activation
 =========================================================================
 Process..................: nb13_21
 Return code..............: 4
 Program runtime..........: < 1 sec.
 Date, time...............: 04.05.2006, 08:56:13
 Program end==============================================================
 ABAP Dictionary: Activation
 End date and time : 20060504085614
 Ended with return code: ===> 4 <===
Can any one tell me why this ? what is the impact of it ??

hi,
you must extend the log complete, than you'll see the
object, which caused the error.
RC = is only warning:
All the objects were transported successfully.
Peculiarities occurred for certain objects. These might
not have been intentional.
Example: A warning is given during a transport if the request contains an object deletion. ...
A.
Message was edited by: Andreas Mann

Error while transporting the request from quality to production of BI

Dear all,
When transporting a request (which contains elements of correction - in Bex designer) from quality to production of BI the following error is displayed and the request transport fails. Can the experts throw some light on this.
 Execution of programs after import (XPRA)
 Transport request : RBDK904992
 System : RBP
 tp path : tp
 Version and release: 372.04.04 700
 Post-import methods for change/transport request: RBDK904992
 Post-import method RS_AFTER_IMPORT started for ELEM L, date and time: 20080406140407
 Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Activation Mode)
 Error when activating element EY2CXLKXP5X5AY0RQ2XKN9EX8
 Element 5E4II2344I3JG4R6ACMYQ441Z is missing in version M
 Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Delete Mode)
 Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L
 The errors affect the following components:
 BW-WHM (Warehouse Management)
 Post-import methods of change/transport request RBDK904992 completed
 Start of subsequent processing ... 20080406140407
 End of subsequent processing... 20080406140408
 Execute reports for change/transport request: RBDK904992
 Reports for change/transport request RBDK904992 have been executed
 Start of................ 20080406140408
 End of.................. 20080406140408
 Execution of programs after import (XPRA)
 End date and time : 20080406140408
 Ended with return code: ===> 8 <===
Thanks in advance.
Regards,
M.M

Hi,
First try to figure out the object type from the text obtained by following steps above.
Goto Development server ,create fresh request (using transport connection) , transport to QA and then in to production.
After successful transfer of the request for this object ,try to reimport the request which caused error and it should go smoothly without any error.
Hope it helps.
Regards
Mr Kapadia

Error while uploading roles from quality to production

Dear friends,
I have to upload roles from quality to production.
I have downloaded it from qualtiy but while uploading to production it is giving me an error "File does not contain valid data".
Can anybody tell me what could be the problem and how to resolve it.
Thanks in advance
regards
Nirgun

HI matore,
the best way is to transport the roles from DEV to QA and then to production as julius suggested
are you trying for mass down load are single role
Mass download
go to PFCG >> utilities>> Mass download>> select all the roles which you want to move it to production
and execute save it on desktop
now go to production system>> go to PFCG>>in menu click on roles>>click on upload>>select the file which is saved in desktop and click ok
mass generation of roles
in the menu click on utilities>>mass generation>>give the role names with you have uploaded and click on execute select all click on genetate button
download a single role
go to PFCG>>in the menu click on role>>click on down load and save it on desktop
now go to production system>> go to PFCG>>in menu click on roles>>click on upload>>select the file and click ok
now you needs to manully generate the role
do the user comparison
hope this helps
thanks
kishore

Error while transporting Datasources in Production

Dear All,
I have facing a problem while transporting objects pertaining to BI Cockpit in Production.
Earlier I had transported all the obects (in more than one transports) in Quality (from Development). After testing the objects, I had imported the same number of transports (and in the same order) to Production and now some of the requests have ended in errors like:
DataSource 0TCTWHMTFM_TEXT does not exist in source system PW1CLNT003 of version A
Such errors have occured for most of the Datasources.
Can anyone let me know
1) Why the transports have failed while importing in Production when similar requests have been transported successfully to Quality.
2) The possible solution to correct the error.
Request your kind help to overcome this problem.
Regards
Shalabh

Dear All,
Thanks for your kind reply.
There are no R/3 Datasources involved. Our BI Cockpit landscape is based upon only BI system. No data transfer to take place between R/3 and BI.
Secondly, you mean to say that I need to replicate my Source system in Production and then proceed with the transporting of the requests from Dev to Prod.
But I never did the same in Quality while transporting from Dev. Is it that it might have been done in Quality beforehand by someone ?
Also, when the Datasources have not been transported to Production (resulting in error) then how can i replicate these datasources in Production ???
Let me know if I have not understood correctly.
Many thanks again for your efforts.
/Shalabh

Error while transporting database index into quality system

Hello,
I am getting an error while transporting a new index in quality system.
I have created a new index for table VBFA in TRD and activity the object without errors. I even adjusted the database table using database utility.
While transporting the request there was a strange error "R3TRTABLVBFA was repaired in this system".
I retransported the objects using a new request. However I still got the same error.
Please help.

Navin,
No idea about the error you have mentioned but check the SAP Notes 185530 and see if you can avoid creating an index.In this Notes it is clearly mentioned on how to use VBFA table without any performance issues.
K.Kiran.

How i can transport request created in R3AR2 from Quality to Production ?

Hi, Gurus !
I'm new in CRM 7.0, and need your help. Well, we made our implementation in 7.0 version, and the things will be fine, until the start of work.....
Well, the initial download of CUSTOMER_MAIN (in transaction R3AR2) do'n't run OK, because a lot of customers in selection have a bad data.... and this time, anybody change this data,
Today, i know how to re-made this task.....
But my question is : how can transport this request, created in R3AR2, from Quality to Production ?
If the transport is not possible, the answer for the question is remake the request in Production ?
Thank you very much.....
Loduca

Did you put your development in a transport when you first saved it? If yes, and if your transport system is properly configured you can release the transport using SE09 and import it into the production using transaction STMS.
Markus

Problem while loading data from quality to production

Hai,
We are using standard extractor 2LIS_11_VASCL, and in test case in QTY 300, we were able to make some changes and see the changes and see the results of the changes in T-CODE RSA3. When we try the same changes in PRD300, No Changes are triggered and T-CODE RSA3 shows no changes.
Can any one suggest me regarding this prolem...

Hi bandi,
Instead of trying for the same changes in production, why cant you do the transport the object from Quality to Production & then check for the changes in RSA3.
You are transporting the object only from Quality to production.
As no data is present in PRD, u may not be finding any changes in RSA3.
Hope it helps.

Transport of object from Quality to Production.

Hi,
I am a technical designer and have a limited understanding on the transport management system and basis.
I had recently created an object on the development system and provided my user with the transport request number. She had moved it to Quality and tested it. The object is working fine and she wants to move it to the production system.
I was under the impression that the request would show up on the production system and could be imported from quality but it is not.
Could some one explain as to what I am missing here? Is there anything I could do from my side to get the object moved from Quality to Production?
Regards,
Prem.

Hi Prem
Plz check whether your request is relased and transported
correctly.
for this log into quality system and type the tcode STMS_IMPORT.
search for your request,
if available ,check if there is a green tick mark against that, if yes then it can be imported to production system ( that has to be done by your BASIS personell).
if not,
check any filter criteria is set in the fields displayed and remove / change if required that as per requirement.
or , use the menu path GOTO -> IMPORT HISTORY (Ctrl+F7) and search ther (here also check for the filter criteria).
it should be available, if it is transported correctly.
do the same in your production system also, u can find your request (but unless transported to production there will not be the green tick mark against that)
reward if useful.
Regards
Prabumanoharan

Transport of activity from Quality to production for webDynpro Java applica

Hi,
can anybody tell me how do i go for transporting activity in webdynpro java applications from quality to production server.
i have done some changes in webdynpro code and deployed in quality system. i have created activity and now want to transport that to production so that the changed functionality should reflect in production system.
Its urgent so your quick suggestion will be appreciated.

Hi,
can anybody tell me how do i go for transporting activity in webdynpro java applications from quality to production server.
i have done some changes in webdynpro code and deployed in quality system. i have created activity and now want to transport that to production so that the changed functionality should reflect in production system.
Its urgent so your quick suggestion will be appreciated.
Hi Vijayalaxmi,
Following are the steps for transporting the content from DEV to QA
1. Check in the activity into DTR and activate it. Once it is activated successfully it will show green
2. Now go to transport view and release the activity by drilling down in waiting... node.
3. Once the activity is released it becomes available in the Consolidation tab of CMS.
4. Import the activity in consolidation tab
5. Assemble the components in the Assembly tab.
Once you assemble an .SCA file is created in \usr\<SID>\trans\CMS
6. Copy this file manually and deploy it using SDM in QA.
Hope it clears your doubts
Best Regards,
Ravi

Transport of Employees from Quality to Production

Hello,
This is regarding Employee assignment in CRM Sales Organizations (using T code PPOMA_CRM). We have around 1200 employees to be assigned in CRM Sales Organizations & we have to assign USER ID's for each of these employees.Since we do not have all 1200 employee master data in Development Server we will have to do this excercise in Quality Server. We want to save all these assignments in a Transport request directly from Quality server, so later same can be transported to Production Server .
Kindly let me know standard procedure for transporting all the assignments of employees & user ids from Quality to Production.
Regards,
Rajendra

Hi Rajendra,
Salesorganisation assignment to employee is masterdata and it willl not involve any tranport .
You need to create the assignment in production client. Sales organisation Id will change from client to
Client.
Regards
Pavan.A

Reg: Error while transporting from Quality to Production

Similar Messages

Maybe you are looking for