Reg: ESS Error

Hi,
When i test some ESS ( ITS ) service (for example: service-pzm3, pz01 and pz02 etc... ) am getting below error. please anyone help me..
Employee Self-Service - Error MessageTitle Employee Self-Service - Error Message 
Employee Self-Service could not be started. Please contact the administrator responsible.
   Error Messages 
   E5A 359User <userid> does not exist in this period   
   Error reading molga   
Thanks,
Suriya.

well i hope you have alreayd installed ITS and you are able to see normal ESS services.
To hots any R/3 transaction, you have to define them as a service. please make entry in table t77www_sc: define a service name, define transaction name, and type of service as "S" (check f4 help for type of service, it should be ITS service).
and then add entry in table t77www_ctp, you can choose any existing ESS catalogue for example "PERS" and add one entry with cobination of that catalogues.
Hope this helps.
Regards,
Sudhir

Similar Messages

  • ESS error in portal

    Hi,
    I get below error message when i click Employee Self-Service in portal.
    "A critical error has occurred. Processing of the service needs to close. Unsaved data has been lost.
    Contact your system administrator.
    Area group ZSAPDEFAULTESS_ERP2005 does not exist."
    I get this error message for languages other than English.
    Could you please guide me what i need to check to correct the above error.
    Thanks in Advance.

    Hi Avadh,
    Thanks for your guidance regarding ESS error in portal.
    We found that the language entry for which we got error, was missing in production.
    We added the language entry in table T7XSSSERARGBT and transported it to production.
    But now we are getting an exception message as shown below.
    "com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: ComponentUsage(FPMConfigurationUsage): Active component must exist when getting interface controller. (Hint: Have you forgotten to create it with createComponent()? Should the lifecycle control of the component usage be "createOnDemand"?"
    I do not feel this error might be due to our transport in production.
    So, please guide us what can be the reason for this exception.
    Thanks in Advance.

  • ESS Error Sweden Address - NullPointerException

    Hi all,
    I am trying to enable the std transaction for ESS Sweden Emergency address for ESS603. Have done the spro config for overview screens and for the determination of active subtypes.The roles are assigned in the backend for the test user.Also IT105 is set up for the proper pernr.
    When I login with the portal test user and run the transaction, its giving the below error:
      java.lang.NullPointerException
        at com.sap.pcuigp.xssutils.ccpcd.FcXssPcd.getStartPerspective(FcXssPcd.java:260)
        at com.sap.pcuigp.xssutils.ccpcd.wdp.InternalFcXssPcd.getStartPerspective(InternalFcXssPcd.java:182)
        at com.sap.pcuigp.xssutils.ccpcd.FcXssPcdInterface.getStartPerspective(FcXssPcdInterface.java:148)
        at com.sap.pcuigp.xssutils.ccpcd.wdp.InternalFcXssPcdInterface.getStartPerspective(InternalFcXssPcdInterface.java:152)
        at com.sap.pcuigp.xssutils.ccpcd.wdp.InternalFcXssPcdInterface$External.getStartPerspective(InternalFcXssPcdInterface.java:244)
        ... 53 more
    I was able to enable Norway emergency address with the above same procedure.
    Please help!
    Thanks
    Kukku
    ESS Error -   java.lang.NullPointerException

    Dear Mohan,
    Thanks for your help.
    But the error :If using the "edit" button, it is possible to enter a new address, but when the review button is clicked, an error is displayed stating "Start date must be 05.01.2012 or later. , still persists.
    Can you help in this?
    Warm Regards
    Geeta

  • Reg : Getting error while approving leave request

    Hello Experts,
    Manger is getting and error message u2018Work item 000000000000 cannot be readu2019 while
    Approving the leave request of one his reportee. This error is triggering for only one
    Reportee. 
    Experts please kindly help us.
    Regards,
    Raj

    Hi Raj,
    There are a number of issues that could cause this.  Can you share your scenario (where is manager approving the request - via SAPGUI, ESS, MSS?)  Are you using an SAP standard workflow?
    Plus, there are lots of threads in SCN on this topic.  Have you checked any of these?
    Good luck,
    Sue

  • ESS error while entering Leave Request

    Hi Gurus ,
    When I am trying to open ESS->Working time->Leaverequest
    It is giveing following error ,please help us
    java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
         at java.util.ArrayList.RangeCheck(ArrayList.java:507)
         at java.util.ArrayList.get(ArrayList.java:324)
         at com.sap.aii.proxy.framework.core.JcoBaseList.get(JcoBaseList.java:268)
         at com.sap.aii.proxy.framework.core.AbstractList.get(AbstractList.java:230)
         at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCList.get(DynamicRFCList.java:281)
         at com.sap.tc.webdynpro.progmodel.context.Node$ModelElementList.getElement(Node.java:2549)
         at com.sap.tc.webdynpro.progmodel.context.Node.getElementAtInternal(Node.java:621)
         at com.sap.tc.webdynpro.progmodel.context.Node.setLeadSelection(Node.java:753)
         at com.sap.xss.hr.lea.form.FcForm.setLeadSelectionForSubtype(FcForm.java:700)
         at com.sap.xss.hr.lea.form.FcForm.setVisibility(FcForm.java:942)
         at com.sap.xss.hr.lea.form.FcForm.prepareCommand(FcForm.java:308)
         at com.sap.xss.hr.lea.form.wdp.InternalFcForm.prepareCommand(InternalFcForm.java:2041)
         at com.sap.xss.hr.lea.form.FcFormInterface.prepareCommand(FcFormInterface.java:116)
         at com.sap.xss.hr.lea.form.wdp.InternalFcFormInterface.prepareCommand(InternalFcFormInterface.java:1887)
         at com.sap.xss.hr.lea.form.wdp.InternalFcFormInterface$External.prepareCommand(InternalFcFormInterface.java:1983)
         at com.sap.xss.hr.lea.form.edit.VcFormEdit.onInit(VcFormEdit.java:299)
         at com.sap.xss.hr.lea.form.edit.wdp.InternalVcFormEdit.onInit(InternalVcFormEdit.java:1084)
         at com.sap.xss.hr.lea.form.edit.VcFormEditInterface.onInit(VcFormEditInterface.java:165)
         at com.sap.xss.hr.lea.form.edit.wdp.InternalVcFormEditInterface.onInit(InternalVcFormEditInterface.java:204)
         at com.sap.xss.hr.lea.form.edit.wdp.InternalVcFormEditInterface$External.onInit(InternalVcFormEditInterface.java:280)

    Hi your Leave scenario is not configured properly from the backend.
    PLease try applying for leave form the backend first using the following method,          
    Once this is configured properly there will be no errror on the frontend
    I hope if you are able to do the following then your r/3 is perfect and then pobably you can open an OSS message with SAP.                         
    Use transaction PT50 to check the leave quota for the employee.                         
    Also use tranx pa30 - enter infotype 2006 (absence quota's) here for that employee you will get all his quota details.
    Then open PTARQ tranx -> clcik Determine approver and check wether is approver is maintained in OM or not,then clik Determine Rule group - > enter emp number and see wether what rule group is the emp attached to , is the rule group configured in SPRO or not.                         
    to activate the Leave application from backend PTARQ is the main tranx where everything must be well configured.                         
    Now clcik on Test Application button -> enter rmp code -> click on Create Request Tab-> enter his managerr emp code in Next Agent input box ->                          
    give infotyp = 2001, subtype = CL (for example) and Date and execute.                         
    if u can successfull apply leave form backend then form front end also u can, if not form backend then you need to config your leave application.
    Cheers!!
    SJ.

  • "mapping null reg" compiler error LV2009

    Opens fine in LV 8.6, but gives "Compiler error. mapping null reg" error in LV 2009.
    If you get rid of the 2D transpose, the code compiles fine.
    Attachments:
    Bitmap to Graphic Block v1.0.vi ‏17 KB

    Thanks for reporting this. The issue has actually already been addressed in LabVIEW 2010. 
    Regards,
    Will
    Certified LabVIEW Architect, Certified Professional Instructor
    Choose Movement Consulting
    choose-mc.com

  • ESS Error Structure field Region not found

    Hello everyone,
    In Netweaver I installed the ESS/MSS and i'm getting the following error, when I go to "Travel and Expenses" -> "Create Travel Plan"
    com.sap.tc.webdynpro.progmodel.context.ContextConfigurationException: DataNodeInfo(FcTrpPlan.PlanBookAndSave.PlanBookAndSave_I_Address): structure field Region not found
        at com.sap.tc.webdynpro.progmodel.context.DataAttributeInfo.init(DataAttributeInfo.java:299)
        at com.sap.tc.webdynpro.progmodel.context.NodeInfo.initUnmappedAttributes(NodeInfo.java:687)
        at com.sap.tc.webdynpro.progmodel.context.DataNodeInfo.doInit(DataNodeInfo.java:238)
        at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:671)
        at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:674)
        ... 54 more
    Do you have an idea how to solve the problem? Thanks a lot!

    Hi All
    We are also getting a similar error. It seems the error is related to SP Levels. Have you been able to resolve this error. Can you please share the details...Thanks

  • ESS: Error while creating Family/Dependents record from portal

    Hi All,
    I'm getting a critical error while creating family members and dependents record from portal.
    CRITICAL ERROR
    "Type conflict in the ASSIGN statement in the program CL_HRPA_CONVERT_0021_US=======CP        ., error key: RFC_ERROR_SYSTEM_FAILURE"
    I checked the short dump in R/3 Side and searched for OSS note and didnt find any. I raised an OSS message.
    If any had've already comeacross this, pls let me know.
    System Details
    EP 6.0 SP15
    ESS Business Package BPERP4ESS0_0
    ESS Support Package  ESS10P_2-10002965, PCUIGP010P_1-20000568
    Thanks
    Karthik

    Hello Karthik:
    I'm getting the same error:
    "critical error while creating family members and dependents record from portal.
    Type conflict in the ASSIGN statement in the program CL_HRPA_CONVERT_0021_US=======CP ., error key: RFC_ERROR_SYSTEM_FAILURE"
    Maybe you can help me solving this problem.
    I appreciate your help.
    Thanks in advance.

  • Changing URL causes ESS errors

    We have been using hostname urls for our Enterprise Portal servers. We have changed one of our QA servers to use a DNS name url and imported a new SSL cert to match the DNS url. So instead of https://server-name.company.com/irj/portal, we are using https://ess_hcm.company.com, with ess_hcm set up in our internal DNS to point to server-name. We have encountered two problems: 
    1. When any object is edited, like address, and then you navigate away from the address edit page, when you navigate back to view address the system throws a "The service you want to start is currently locked." error. The user must be manually logged off in the R3 system using sm04.
    2. When clicking back to view address, in the first and second level navigation bars the highlights go back to the first item in both bars, and the path to the current service is lost.
    Neither of these errors occur when the portal is accessed using the hostname-based URL. Can anyone point us to the configuration needed to make ESS work with the new url?  Thanks!

    try [link|/thread/138776 [original link is broken]; and [link 2|/message/1393641#1393641 [original link is broken];
    This should help you to re look at your settings.
    Cheers,

  • ESS Error - User id does not exist

    Hi All,
    When the user click on personal information - Emergency address link on the portal, user gets error "user XX does not exist in this period".
    This proble is only for this particular user.
    on the back end an abap dump with following error message is encountered.
    Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED_NO 
    Exception              CX_SY_REF_IS_INITIAL           
    Error in the ABAP Application Program                                                                               
    The current ABAP program "SAPLHRXSS_PER_MAC" had to be terminated because it    
    has                                                                            
    come across a statement that unfortunately cannot be executed.                  
    I checked the data is maintained in IT0105 an IT0002 correctly. Even the table V_T7XSSPERSUBTYP has value for IT0006 with correct usecase.
    The user has a hiring date of 13.07.2009 and IT0105 also has the start date as 13.07.2009 can this be  the reason? Since the validity is not for complete month?
    Please advise what could be the possible reason for the above error. How to solve the problem
    Regards,
    Swati

    Hi,
    you have to map the EP user to an employee at the backend for the ESS services to work.
    Go to transaction HRUSER and check whether an employee is connected to this USER_ID. If it is not there, go to transaction pa30,select an employee and create a new record for the infotype 105 ( subtype 0001) with the USER_ID.
    This will solve the issue.

  • ESS Error after imported EA-HR 602

    Hi all,
    I was imported enhancement pack 2 for single component EA-HR (602) as requested by client to use function "HCM Processes and Forms" according to sapnote below:
    Note 1024326 - Corrected UI for role HR administrator available
    HCM Processes and Forms:
    The following technical components are prerequisites for HCM Processes and Forms with Enhancement Package2 (EHP2):
    EA_HR 602 (imported)*
    BP ERP05 HR Administrator 1.11 (imported)*
    All the requirement that addressed in below sapnotes had been checked before proceed:
    Note 1045303 - Installation of Enhancement Package 2 on SAP ERP 6.0
    However, we encountered problem accessing ESS in Portal after we imported EHP2 for EA-HR:
    ERROR LOG
    Critical Error
    A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
    Please contact your system administrator.
    Syntax error in program SAPLPTRA_UTIL_MAIN      error key: RFC_ERROR_SYSTEM_FAILURE  
    We ran a consistency check for program SAPLPTRA_UTIL_MAIN and encountered syntax error:
    ERROR LOG:
    Function Module PTRA_UTIL_WELCOME_SCREEN_GET
    Statement "RP_IMP_C1_TC" is not defined. Check your spelling. .
    According to change document of the program, it was modified during importing of ehp2 EA-HR.
    Currenrt Support Package Level :
    Component     Software Component      Level
    SAP_ABA                    700                     0015
    SAP_BASIS            700                     0015
    ST-PI                    2005_1_700     0006
    PI_BASIS                    2005_1_700     0015
    SAP_BW                    700                     0017
    SAP_AP                    700                     0012
    SAP_APPL            600                     0013
    SAP_HR                    600                     0029
    EA-IPPE                    400                     0013
    FINBASIS                    600                     0013
    EA-RETAIL            600                     0013
    EA-PS                    600                     0013
    EA-HR                    602                     0000
    EA-GLTRADE            600                     0013
    EA-FINSERV            600                     0013
    EA-DFPS                    600                     0013
    EA-APPL                    600                     0013
    Do we missed out any prerequisite support packages?
    Appreciate if any advise providen.
    Thanks.
    BR,
    Nancy

    Hi Nancy,
    From your system component information, EA-HR still in SP 00.
    You are recommended to import SP for EA-HR ehp2 once installed EHP2 package.
    You may try to import support package for EA-HR and let c if it works.
    Help me dapao. Thanks
    BR,
    Terry
    Edited by: Tow Terry on Mar 20, 2009 4:40 AM

  • Loan request - ESS - Error on eligiblity

    Hi
    Loans are configured in R/3 and working fine .... I configured the same for ESS ( Benefits and Payments - > Loan Requests ) when i try to raise a request for a loan type in ESS , i get en error saying " The Experience of employee 00000022 is less than eligibile experience for loan" , even though i have given "null (0) " in the node - Maintain loans Eligiblity checks and limits ... have any of you come across something like this..... inputs on how to solve this would be highly appreciated.....
    Cheers
    Sang

    Hi Sai Sree
    Thanks for the reply
    Even with the BADI activated, i get the same error in ESS..
    In the ESS - Loan Request screen, the "Reference No." field is grayed out with '000000000000" , though i have given the number range in SPRO for the same...
    Can you please let me know whether you get the reference number field correctly filled??
    Thanks in advance
    Cheers
    Sangeetha

  • Reg:ESS Apprisal document iview in career and job

    hi all
    when i am working with Appraisal document i view which is designed in wdabap application,this is a standard application.the problem here is previously i got an portal run time error,but i resolved this error by changing the system name in properties of the object,
    Now when i chk the preview of that i view it is giving an error that THE WEB DYNPRO APPLICATION WAS CALLED UP WITH THE WRONG URL PARAMETER.
    can anyone  please share their Exp's on this and how to rectify this.
    Thanks in Advance
    Deepika
    Edited by: deepika_indian on Feb 17, 2011 6:58 AM
    Edited by: deepika_indian on Feb 17, 2011 7:35 AM
    Edited by: deepika_indian on Feb 17, 2011 7:50 AM
    Edited by: deepika_indian on Feb 17, 2011 8:41 AM

    Hi,
      I am sending you the link pls check
    ESS : Webdypro iView Customizing
    Here, I told many things to Kaushal but unable to resolve the problem. Please help me.
    With Best Regards
    Deep Nain kundra

  • ESS Error message due to Leave Collision

    Dear Friends,
    We are doing new ESS MSS implementation on ECC 6.0.
    We have configured SAP R/3 to accomodate Collision of leaves in table V_T554Y (Global Time constraint raction) and we can create leave collision through PA30.
    E.g: A person who has taken Annual Leave on a particular date can take sick leave on the same day. Sick leave will overwrite/delimit the Annual leave.
    We are getting a collision error message while applying for the same leave (Sick leave in the above example) through ESS and not able to go further with the leave request. The same leave, I am able to create through PA30 in R/3.
    Please suggest a solution.
    Regards,
    Preethi

    I have same problem to you.
    If the leave request is already maintained in PA30, the collision error message will raise and the request can not save to R/3.
    Dear export, could you provide the solution about it, how can I update infotype based on request via portal approve. I know the collision message according to customizing V_554Y_B.
    The leave request can not save data if the collision type is E(-The system does not allow you to create the new record, and
    displays all collisions.), right?
    Thanks a lot,
    Anne

  • Ess error & unable to create new user

    hi gurus...
    i new to portal and i m facing problem in ess and user creation ...
    1 .)   my ess is showing the following error
    Service cannot be reached
    What has happened?
    URL http://wind:8000/webdynpro/dispatcher/sap.com/pcui_gp~xssutils/XssMenu call was terminated because the corresponding service is not available.
    Note
    The termination occurred in system EC1 with error code 404 and for the reason Not found.
    The selected virtual host was 0 .
    What can I do?
    Please select a valid URL.
    If you do not yet have a user ID, contact your system administrator.
    ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:wind_EC1_00-v:0-s:404-r:Notfound
    HTTP 404 - Not found
    Your SAP Internet Communication Framework Team
    2) In user management .. when i m clicking on create new user tab... it shows an error and says "An error occurred; contact your system administrator "   while i m the admin here and having all the right with me.
    pls help me regarding this....

    Hi,
    Did you install pcui_gp sca file suring deployment of ESS/MSS business package.?I think that sca file is missing
    1 .) my ess is showing the following error
    Service cannot be reached
    What has happened?
    URL http://wind:8000/webdynpro/dispatcher/sap.com/pcui_gp~xssutils/XssMenu call was terminated because the corresponding service is not available.
    2) In user management .. when i m clicking on create new user tab... it shows an error and says "An error occurred; contact your system administrator " while i m the admin here and having all the right with me.
    Is data dource configured to ABAP? then create in abap system such that users will be visible into portal.
    Regards,
    Koti Reddy

Maybe you are looking for