Reg. Flow for building construction

Dear Experts
Our company doing real estate also (Building construction ). What is the flow,any one could guide me ?
Currently we are doing garment export and we have configured for construction as like as garment manufacturing. I think there is
another one flow especially for construction and engineering
Thanks in advance
Rajakumar.K

hi,
This could also come under "SAP for Engineering, Construction, & Operations"...
If this you want then it may have:
A. Plant engineering and construction:
·       Bill of services (BOS)
·        Equipment and Tools Management (ETM)
B. Construction
·       Bill of services (BOS)
·        Equipment and Tools Management (ETM)
C.Homebuilding
·        Real estate sales
Also check the link given below:
SAP for Engineering, Construction, & Operations
Regards
Priyanka.P

Similar Messages

SAP Best Practices for Building construction industry

Hi All:
Is there any best practices available in the building/house construction industry? Can you please guide me through that?
Thank you.
Regards,
- Rohan

Yes they do
Look here:
http://www.simplysap.com/sap-news/sap-articles/sap-adds-60-offerings-family-of-sap-best-practices.htm
http://www.sap.com/industries/eng_construct/index.epx
http://download.sap.com/download.epd?context=D6B5CC86EFFB6EF10CE24BDC2B076371A3E006D336E32EFF63C3CD11CF5450FDA274E617019330E191ABE803C04F532DCFB4A0F8A50E3F32

SAP Implementation for a building construction company

Dear All ,
               We are doing SAP implementation for a building construction Company .My client is responsible for building construction .What they do is initially some 10 members of this Company will create a society(Legal Entity) .They are like promoters for company . They will put advertisement for buying of flats belonging to that society . Then some 20 members (outside) join this society by registering who are actual buyers of the Flats which society builds .
               Then this society passes a resolution that my client will be the building contractor for flats . After that these 20 outside members will pay the full amount . After this Flats were built then these members will occupy flat ,then after some 4 -5 years of maintenance these 10 core members of society will hand over the society completely to secondary members and come out of the society .
                Now how we will map this society in SAP .One society can have more than one project going on . Somebody is suggesting to treat a society as a company code . But we have more than 250 societies . Is it viable . Shall we create plant for each project .
Regards
Abhijit Das

Hi Abhijit,
Suggestion by our PS consultant for your requirement is
>>>I would suggest that in case of PS, consider society as Business area and each building as one Project and under project WBS and if any activities floor wise consider as networks.
Oust side membersu2019 Account payables and receivables and downpayments will come under FICO.
Regards,
Uzair

Process flow for Maintenance Event Builder integrated with PS

Dear EAM Master ,
Good Day. Can anyone show me how's the process flow for Process flow for Maintenance Event Builder integrated with PS.
Appreciate.
Thank you.

[SAP Help|http://help.sap.com/erp2005_ehp_05/helpdata/en/d7/d0b83a47d0c649e10000000a114084/frameset.htm]
Thanks
Narasimhan

Reg : To view process chain flow for a cube

HI Experts,
I need to view process chain flow for a particular cube of sales distribution.Can you please tell me stps to perform .

Hi,
If the cube is already loaded then you can just to the infopackages which are loading it and in the infopackages you have option in the "schedule" tab to see which process chain it is loading.
if not then you will have to identify which data source is loading to the cube and check for the infopackge.
and I think the DTP will be in the same chain as well.
For DTP it is alreday mentioned by the others.
Thanks
Ajeet

Reg : document flow for SD and MM ?

hi everybody,
i want to know the document flow for SD and MM.
please any guide me.
my id: [email protected]

http://www.sap-img.com/sap-download/sap-tables.zip
You can check the links..
http://academic.uofs.edu/faculty/gramborw/sap/sapguide.htm
http://www.sap-basis-abap.com/sapfiar.htm
http://www.thespot4sap.com/IntroTo/SAP_FI_Module_Introduction.asp
http://www.thespot4sap.com/IntroTo/SAP_CO_Module_Introduction.asp
http://www.sap-basis-abap.com/sapco.htm
http://help.sap.com/saphelp_40b/helpdata/en/e1/8e51341a06084de10000009b38f83b/applet.htm
http://www.sapgenie.com/sapfunc/fi.htm
http://www.sap-basis-abap.com/sapfi.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCMM/CAARCMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_MM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOMDMM/LOMDMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMMM/BCBMTWFMMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMIVMVAL/MMIVMVAL.pdf
here r the links for MM
http://www.sapgenie.com/abap/tables_mm.htm
http://www.sap-img.com/sap-download/sap-tables.zip
http://www.allsaplinks.com/material_management.html
http://www.training-classes.com/course_hierarchy/courses/2614_SAP_R_3_MM_Invoice_Verification_-_Rel_4_x.php
http://www.sapfriends.com/sapstuff.html
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSMAT/PSMAT.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCMM/CAARCMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_MM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOMDMM/LOMDMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMMM/BCBMTWFMMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMIVMVAL/MMIVMVAL.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMWMLVS/MMWMLVS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMISVE/MMISVE.pdf

Process Flow for Subcontracting

I need help in the process flow for Subcontracting
With Regards
Maya

Please have a look at the building block '442 RFQs for Project-based Procurement' and '443 Purchase Orders for Project-based Procurement' of the SAP Best Practices for Engineering, Construction, and Operations SAP Best Practices for Engineering, Construction, and Operations U.S - V1.604 (SAP Best Practices for Engineering, Construction, and Operations – SAP Help Portal Page).
Best regards,
Maria

How to map building construction service contract

how to map building construction service contract
pls let me know the mapping in sap and proceedure for bill passing and payments

Hi,
You can use a service contract or a partial invoicing plan (framework order) to map it in SAP.
Reg,
Deepak.

Business Process Maps/ Process Flows for Retail Operations

Dear All,
I am looking for Business Process Maps/ Process Flows for Retail Operations like forecasting, inter store transfers, ASN, Procurement, Allocation etc.
Kindly provide me with a link, docs, PPts etc.
Appreciation would be in the form of points.
Regards,
Jack Silverz

Hi Jack
Seeing as you only got one reply - I'm jumping in with my 2-peneth.
Seldom have I found process content which sufficiently explains both manual and automated processes in a format which is sufficiently simple to engage discussion (between project teams and business representatives). Is there a way to strike the required balance - simplicity for the sake of engagement; yet rich enough to record SAP dependencies, system requirements and so forth.
An answer in my opinion is [here|https://ecohub.sdn.sap.com/irj/ecohub/solutions/control2007]. (Honest account - I work for Nimbus. But you don't have to take my word for it. Check out our case studies if you like. This approach is being adopted by several strategic SAP accounts several of which are listed [here|https://ecohub.sdn.sap.com/irj/ecohub/solutions/control2007]).
What might partly address your requirement is the [APQC Process Classification Framework|http://www.apqc.org/portal/apqc/site/?path=/research/pcf/index.html] . We took this framework as a starting point for building a model company process map. I cannot claim that it is Retail specific, but we have quite a few retail customers who have adopted Control 2007 and also several supply chain optimization projects which we have delivered.
If this is of interest - we provide a web hosted demonstration environment where you can explore the APQC process content I mentioned above. You can contact me through [SAP EcoHub|https://ecohub.sdn.sap.com/irj/ecohub/solutions/control2007] for more details
Kind regards, Nigel

Typical work flow for porting c/c++ libraries?

I'm new to the whole Alchemy world and I'm also very rusty regarding my knowledge in C/C++ (which was never that good to begin with). This is making my experimenting with Alchemy somewhat difficult, since I don't know if the problems I have are related to me not understanding the C-compiling process or the library I'm trying to compile not even being possible to compile using the Alchemy gcc. I've managed to compile some of the samples in the Alchemy download and some "Hello world" level code of my own. But I've yet to fully understand the process of compiling an arbritary C-library to an swc. So, what I'm hoping for is for you guys that have more experience with this to give some pointers about the whole process by answering my questions below.
1. Are there any indicators one can look for in C-libraries to determine if they can be successfully ported? (e.g. only use ANSI-C libs)
2. What would be the typical work flow for porting a C-library after having downloaded it's source? How do you go about starting to build the C<-->AS3 interface? Do you dive into gluegen immediately, or write the glue.c by hand?
3. When should one do ./configure; make etc. to compile a library and when does one simply use gcc alib.c...?
4. Do you have any examples of simple C-libraries one could try to port? With simple I mean libraries that don't have any external dependencies to other libraries and have a relatively small source (say 5-10 files or something).
Feel free to chip in with any answers you may have. And since I'm a n00b, please use idiot-speak as much as possible

Thks for ur reply Jens.
But still it not very much clear to me.
Can you please throw some light in the bellow sinerio :
Let say I want to build an sample music player application in Linux which will be having following module
1) GUI : which contain one button : say PLAY
2) Event handler : for the click event of PLAY Button
3)Plugin for playing music : code wich actually plays the music
So GUI that is button if devolop in FLASH/FLEX
Event handler module will be written in Action Script
Plugin will be written in C which will use gstreamer framework APIs in turn . So these plugin API's should get called from Event Handler i.e Action Script code And here is the place where binding from FLASH to C API's is requried.
So in the above senirio the actual execuable of the application will be nothing but swf file only.
Can I use Alchemy as a glue for binding FLASH & C??
Plz correct me if I am worng.
Please share ur thoughts ...
Thanks in Advance
Kapil

Book Recommendation for Building Swing Applications

I'm looking for recommendations on books for building swing applications from the ground up.
I'm not a strong GUI developer. 95% of my experience has been strictly on back end development in many other languages. What little GUI experience I have has been with C++ (years ago) and most recently with HTML.
I know what I want to develop, and even have the GUI design for my application drawn out. I just need a good book that can walk me through developing the interface in Java.
I already have several books on Java. But, I find them somewhat limiting because they don't help me build the app from the ground up.
Yes, I've tried the online book on the Sun site, "The Jfc Swing Tutorial: Guide to Constructing Gui's".
Please offer some recommendations and reasons on why you like the book.
Thanks.

A few comments to that ....
the first thing is understanding the LayoutManagers, that are available.
I will give you a short guideline where they are usefull:
FlowLayout - usefull for JLabel-JTextField combinations or several JButtons
BorderLayout - usefull for the structure of basic containers
CardLayout - usefull for every area of the screen, where you want to appear different panels
GridLayout - usefull for a group of same-sized components laid out in a grid
GridBagLayout - usefull for a group of components, that have different sizes, very flexible
JTabbedPane - a special container, that is similar to CardLayout but with visible tabs to switch panels
Normally you can say "I want that group at the bottom of the frame, that other group at its left side, that toolbar at its top" - if you can say so - that shouts for BorderLayout. If you can say "in this area I want to use several panels" that means CardLayout or a JTabbedPane.
You see, if you have an idea, what the LayoutManagers do, you know exactly which area needs what Layout - so you have a guideline, which LayoutManager to use in that panel.
To make an example:
You want 3 buttons centered at the bottom of a frame - this 3 buttoms should be of that size, that is needed by the button texts. So, what to do:
1. create a JPanel with FlowLayout
2. create the buttons and add it to that JPanel
3. create another JPanel with BorderLayout
4. add that first JPanel to the second JPanel at BorderLayout.CENTER
5. add this Panel to the ContentPane of the frame at BorderLayout.SOUTH
that is a simple panel in panel construct - placing 3 buttons centered at the bottom of the frame. You have to play with that different LayoutManagers a little bit - the way you stick one panel in another changes the look of the GUI - if you know, how it changes (by playing with the examples of the tutorial), you will have that "from the ground"-experience, you are looking for - believe me.
greetings Marsian

PS: WBS is not flowing for a Material, while creating delivery from Project

Hi,
While creating delivery from Project thro CNS0, WBS is not flowing for a Material in delivery, in turn WBS is not flowing in Billing document for same material, in turn not allowing to Post the Billing document to Accounting.
Error while releasing Billing to the Accounting: Accounting Entry is not generated. Error Message:Assign Condition type
YMRG in COPA.
Pls let me know, what can be the reason ?
Thanks.
Amit.

Hi Kuldeep,
Check this note,
Note 159387 - Message BP603: incorrect line item is displayed
Its valid only till 4.6. Might give you some idea but.
Regards,
Gokul

Reg: vacancy for LabVIEW developer in Bangalore, Chennai and Delhi with (1-6) years experience

Recruitment Process for LABVIEW: Tele Interview in case of outstation candidates. Bangalore candidates will have to first come for a Written Test (Technical + Analytical), 1-2 rounds of direct technical interview.
Degree/Branches: B.E / B.Tech in Electronics / EEE / E&C / E& Instrumentation .
ROLES AND RESPONSIBILTIES OF ASSOCIATE ENGINEER-SEG:
Development
1. Responsible for developing software for the project/module allotted to you with smooth coordination and smooth handing over of the work executed by one to another member in case of change of projects.
2. Expected to work on multiple projects, project dead line, adhere to coding guidelines and update your progress on the project on a weekly basis to your immediate supervisor.
3. Developing the software strictly as per the requirement specification, design and Bug free.
4. Responsible for building a trouble-free system to the satisfaction of the customer.
Installation
1. Responsible for installation of hardware and software at customer site for coordinating with the vendor and Manager – Sourcing to see that works done by the vendor is as per requirement specification
Customer Support
1. Responsible for providing support to the customer on the system supplied by the Captronic Systems in the past as well as present.
2. Attends to the support case within 48hrs(local) / 96hrs(outstation ) / 96hrs(out of warranty) of reporting and collecting the Support Closure Report from the customer and submit it to the SBU-HEAD
3. Informs Support executive with Support Status, Action Taken and Support Closed On
Training
1. Responsible for providing training to customer on the systems supplied by Captronic Systems.
2. Responsible for in-house training to newly recruited engineers.
Testing
1. Responsible for testing code developed by you, by another developer and testing entire system at the customer site.
2. Responsible for testing hardware supplied by Captronic System and log the test report on the hardware test register.
Sales Support
1. Expected to travel with sales team to provide support to sales-team in proposal making at short notice and perform flawless pre-sales system and requirement study.
General
1. Expected to take part in technical sessions and keep yourself abreast with the recent product released and technical advancement made
2. Expected to become domain expert is at least one field and to constantly improve coding style and knowledge.
Quality
Responsible for implementing the project methodology and quality policy of the company for all activities under your purview
Interested candidates may forward your resumes witheir current CTC and notice period to [email protected] . Salary is never the Constraint.

SANDU SUNITHA
D/o.S. Venkateshwarlu,
H.No:11/57, Kothapeta,
Maruthi Nagar,Dhone,
Kurnool (Dt.),
Andhra Pradesh.
E-Mail:[email protected]
Mobile : 91-9963586292/08884822259
Date: 09/ 05/ 2013
Respected Sir/Madam,
I have done my masters in Control Systems Engineering in Electrical
branch from Malla Reddy College of Engineering. I am a well organized
person, with good knowledge about the subject, able to do
multitasking, able to work within a team and have excellent
communication skills. As a good Engineer and excellent team player I
can handle the responsibilities and challenges of the post of an good
engineer to its fullest.
I have worked for 6 Months as Project Trainee in CSR INDIA PVT LTD. My
responsibilities in that institute include Testing, Reporting and
Debugging, Updating the bugs as a trainee fresher. I was a part of the
team that designed MERCURY TESTING TOOL, world's Best Automation tool
today. I tested the model and executed the changes.And i had worked as
Project Engineer in FUSION ELECTRONICS on Wonder ware SCADA. Presently
working as Project Scientist in NAL (National Aerospace Laborateries)
under Research and Development of IVHM(INTEGRATED VEHICLE HEALTH
MANAGEMENT) Project on MATLAB/SIMULINK ,Labview ,Wireless Sensor
Networks,WatchDog and Testing.
Here is the list of the documents enclosed with this cover letter.
1. Resume
I hope that you find these of worth. I assure you that if selected; I
will not let you down and would prove to be an asset for your reputed
industry.
Sincerely yours,
SANDU SUNITHA
Attachments:
SANDU_SUNITHA(29_Apr_2013).doc ‏176 KB

How to set reg.cgi for VideoPhoneLabs

i start with stratus .i try set it to work with my dedicated apache server and sql but have no clue how to do it or where to put this file on my server.
i realy have probleme with reg.cgi
for now i did www/cgi-bin/reg.cgi and in the xml i set my websiteurl = "http://88..../cgi-bin/"
also how to complete reg.cgi for have it to talk with my db ?
here the reg.cgi file.
help please ...
#! /usr/bin/python --
reg.cgi by Michael Thornburgh.
This file is in the public domain.
IMPORTANT: This script is for illustrative purposes only. It does
not have user authentication or other access control measures that
a real production service would have.
This script should be placed in the cgi-bin location according to
your web server installation. The database is an SQLite3 database.
Edit the location of the database in variable "dbFile".
Create it with the following schema:
.schema
CREATE TABLE registrations (
    m_username VARCHAR COLLATE NOCASE,
    m_identity VARCHAR,
    m_updatetime DATETIME,
    PRIMARY KEY (m_username)
CREATE INDEX registrations_updatetime ON registrations (m_updatetime ASC);
# CHANGE THIS
dbFile = '.../registrations.db'
import cgi
import sqlite3
import xml.sax.saxutils
query = cgi.parse()
db = sqlite3.connect(dbFile)
user = query.get('username', [None])[0]
identity = query.get('identity', [None])[0]
friends = query.get('friends', [])
print 'Content-type: text/plain\n\n<?xml version="1.0" encoding="utf-8"?>\n<result>'
if user:
    try:
        c = db.cursor()
        c.execute("insert or replace into registrations values (?, ?, datetime('now'))", (user, identity))
        print '\t<update>true</update>'
    except:
        print '\t<update>false</update>'
for f in friends:
    print "\t<friend>\n\t\t<user>%s</user>" % (xml.sax.saxutils.escape(f), )
    c = db.cursor()
    c.execute("select m_username, m_identity from registrations where m_username = ? and m_updatetime > datetime('now', '-1 hour')", (f, ))
    for result in c.fetchall():
        eachIdent = result[1]
        if not eachIdent:
            eachIdent = ""
        print "\t\t<identity>%s</identity>" % (xml.sax.saxutils.escape(eachIdent), )
        if f != result[0]:
            print "\t\t<registered>%s</registered>" % (xml.sax.saxutils.escape(result[0]), )
    print "\t</friend>"
db.commit()
print "</result>"

Persistent binding is effectively provided by STMS (MPxIO) - is there anything in particular you're wanting to do that STMS doesn't provide?

Triggering a sub work flow for multiple users at same time.

I have a scenario in which I have created sub workflow as an activity for approval process. This sub work flow should be triggered for multiple users at the same time and their decison is independent of each other.
This is like creating multipe instance of the same sub work flow and then the sub work flow runs indepedently as a new work flow for each of the approver and the process is completeded for approver independently.
How can this be achieved?

Tyr to do like this,
1. First include the subworkflow in the main workflow template.
2. Now include standard Block Step in the main workflow template.
3. In the block select the block type as ParForEach.
4. Before doing the 3rd point make sure that all the agents for whom you want whom you want to initiate the workflow, populate them in a Multiline conatiner element.
5. Once completing 3rd and 4th points open the block step under the tab ParallelProcessing assign the multiline container element name in the for e;g if the multi line container element name is COSTCENTER then do the binding like below. the conatiner element COSTCENTERLINE is created by default once you include the multi line conatiner element under parller processing tab.
&COSTCENTER[&_WF_PARFOREACH_INDEX&]& --------> &_COSTCENTER_LINE&
Now assign the agent of the subworkflow as COSTCENTERLINE , imean if suppose you have 3 entries in the internal table then three separate and for three different agents the workflow is instantiated.

Reg. Flow for building construction

Similar Messages

Maybe you are looking for