Reg: How to create and assign jco in xcm (CRM 5.0)

Hi All,
I have configured CRM 5.0 on Win/SQL.
I am in the process of configuring IPC 5.0.
I have made the cnahges as per the config. guide for IPC.
I have to do some settings in XCM.
For which I have to create and assign JCO in XCM.
Which I am not able to do so.
Please do advice and help.
Rgs
Vikas

Vikas
Good. I will support you to my level best !!!
Assumption: U have the Admin User Id /Pass
The URL should look similar to this :http://<host>:53500/isauseradm/admin/xcm/configTreeSelect.do
1. On the Left Panel, Select
 Start --> Components --> Customer --> JCO
2. Now give the name of the JCO Customer component configuration and press ENTER
3. Meanwhile Collect the Details of the SAP CRM 5.0 Server (Client no,lang EN, System Nu,AS Host)
4. Pucth in the Appropriate details at the Properties requested in the JCO Property. Go with group_connect in Base Configration prperty
5. Save the Config
6. Press TEST RUN button for testing the JCO connection
 REsult will be: GREEN for Succesful Connection
 RED for unSuccessful Connection
Hope this helps !!!
Thanks
Jack
Allot points if my post helps !!!!
Message was edited by: Jack

Similar Messages

How to create and assign role

Dear all,
I want to create the role and assign.
kindly let me know
shailesh

Please have a look at below link. It explains how to create and assign content ( roles, iveiws) in Portal
http://help.sap.com/bp_epv170/EP_US/BBLibrary/documentation/N04_BB_InstallGuide_EN_US.doc
Kindly assign points if helpful
Regards
Jayesh

How to create and assign a help document to INFO button on ALV grid

Hi All,
Can somebody tell me how to create an 'END USER DOCUMENTATION' document and the 'FUNCTION MODULE' to call it and display in the form of F1 help screen.
OR
Is there any standard method to call & display a help document, when the user clicks the INFO(i) button on the ALV grid standard toolbar?
Thanks in advance.
Rkumar

Hello Rkumar
If you have defined a documentation for your ALV report which you want to display when the INFO button is pushed you can use the following coding:
CALL FUNCTION 'DSYS_SHOW_FOR_F1HELP'
 EXPORTING
 DOKCLASS = 'RE' " = report
 DOKNAME = '<name of your ALV report>'
 SHORT_TEXT = 'X'
 EXCEPTIONS
 OTHERS = 1.
Regards
Uwe

How to created and assign one object to a transaction code

Hello All,
Please give some Idea about, how to assign an newly created object to a transaction code.
I want to give authorization on co11n transaction code. by default there is no control on storage location level. I created a new object 'Z_AFRU_AWK' that incudes 4 fields. Activity, Order type, Storage Location & Plant'. How I can assign this object in the place of C_AFRU_AWK.
I done this throught su24 but its not working. I am missing something. please help me.
regards
Lal

Hi Kariyath ,
what object have you created is it a abap program or a script or a module pool what you are referein here.Please be clear.
You can maintan the authorizations in the transaction PFCG.
Select the role and then change the authorization data there.
Reward points if helpfull.
Regards,
Vamshi.

How to create and send clob value to SP?

Hi,
Does any one of an example of how to create and send
a clob value(as a IN parameter to storedprocedure) from JAVA to
the StoredProcedure. I need the JAVA code.
null

Hi
Following is sample code you can use.
DECLARE @testID Int
DECLARE @year int
DECLARE @testtype datatype
SELECT @testtype=testtype from yourTable Where Your condition
SELECT @year= year from yourTable Where your conditon (you need to make sure you assign or get @year variable )
SELECT @testid=id from test where year=@year and testtype=@testtype)
Hope this helps
Regards

How to create and allocate authorization profiles?

How to create and allocate authorization profiles? please issue step by step and usage of TC:PFCG.

Hi Srinivas,
I would like to try to explain how to create an authorization profile.
1. you have to create a user with the Tcode SU01 at first
2. run Tcode /nPFCG.
3. enter a name for the role (naming convention is here very important) which you want to create and then click on "create Role".
4. enter a short description for the role and then click on Authorization tab.
5. now you are required to save the role. Click on it and continue.
6. click on the tab "change authorization data" and select the authorization template what you need.
7.change the authorization field value.
8.click on button "Generate".
9.click on button Back
10. click on Tab user to assign the role to the user which you created in step one
11.click on button User comparison and then complete comparison
Hope this helps

Create and assign roles

Hi Experts,
How to Crete and Assign roles to users? i need to work on this? please explain on this which T_codes we need.
I need step by step process.
Thanks in advance
David

Hi,
You can create roles in the PFCG transaction. Check the below link. It contains the step by step procedure for creating roles.
http://help.sap.com/saphelp_46c/helpdata/EN/52/6714a9439b11d1896f0000e8322d00/frameset.htm
Hope this will help.
-Jaimin

How to create and install a toolbar to a browser using java

Hi all,
Can any one guide me about how to create and install toolbar to a browser using java ??
please any one help me about this,i am not getting any idea about this..
Thanks and Regards
Sandesh S

I doubt you can. Those browser toolbars are done by implementing to an API provided by the browser. That API, I don't believe, is provided via Java. But of course, that would be entirely up to the browser, not Java.

How to create and execute a function whose return value is a table

hi folks ,
i would like know how to create and execute a function whose return value is a table ,
am new to pl/sql ,
my statement for the function is
SELECT ct.credential_code, c.expiration_date
FROM certifications c, credential_types ct
WHERE ct.crdnt_id = c.crdnt_id
AND c.person_id = person_id;
i would like to have the result of the above query as return value for the function.
Thanks in advance ,
Ashok.c

hi Ps ,
Can you please do small sample ,
that would help me in clear understanding
thanks in advance
ashok.c

How to create and call a COM component in Java

Hi All,
can you suggest how to create and call a COM component..or if have any sample simple application can you send it to me...i will try to develop my project.
actually i am configuring a OCR Engine using SDK which is in VB .Net when i contacted their support they told that if i have any sample COM based component Project they will help me...
So please can you help in this.
Thanks in advance.

As said by my fellow posters Java Devolopment Environment (Except Microsoft implementation of JVM,this is no longer supported by MS themseleves) does not provide an built-in support to serve this cause.
If you are looking to devolop a custom based solution the below is a good place to start with where end user is talking about Java <=> JNI <=> Native <=> COM connectivity.
[http://bloggershetty.blogspot.com/2004/12/java-jni-com-activex-bridge-lots-of.html]
However,if you are looking for ready made solutions ?
Implementation any one of the solutions stated below might serve your cause.
Open Source Solutions:
[http://j-interop.org/]
[http://www.danadler.com/jacob/]
Commercial Solutions:
[http://javacombridge.com/]
[http://www.jnbridge.com/]
[http://www.nevaobject.com/j2cdetails.asp?kw=java%20com%20bridge]
[http://j-integra.intrinsyc.com/]
Hope this might help :)
REGARDS,
RaHuL

How to Create and Test a Zone of Type F1-APP-URL

Hi,
I would like to how to create and test a Zone of Type F1-APP-URL?
What all is required to setup an ADF application based URL in F1-APP-URL, what to configure and what are the basics or definite steps required to have a Zone of Type F1-APP-URL up and running in the application? Any Sample ADF components to be created?
Please kindly let me know. Any test or dummy URL existing already which is based on ADF?

Refer to Doc. Id 1515146.1 on the support site. Although for the moment it refers to a MWM example and may not be much of a help but it'd give a basic idea as to how it should be done.

How to create and implement a new work schedule rule successfully?

Dear Community,
How to create and implement a new work schedule rule successfully?
In other words, what are all the basic steps to create and implement a new work schedule rule successfully?
Thanks in advance.

Hi,
Follow the below steps to create Work Schedule:
Holiday Calendar
Transaction Code: SCAL
Holiday calendar comprises of list of paid holidays to be given to employees on festivals by the company.
Personnel Area/SubArea Groupings
Go to SPRO --> Time Management --->Work Schedules --> Personnel SubArea Groupings
Maintain perosnnel area/Subarea groupings for work schedule.
i.e. Suppose in Mumbai you have WS = GEN ( 10 to 6) and in Chennai you have WS = NORM ( 8 to 4 )
Work Schedule
Go to SPRO --> Time Management --->Work Schedules -->Daily Work Schedules
Go to SPRO --> Time Management --->Work Schedules -->Period Work Schedules
Daily Work Schedule is actually your office timings with breaks (paid /unpaid) i.e. Planned Working Time which is then included
in Period Work Schedule to make a week ( M T W T F S S )
Daily Work Schedule (i.e. Day) -
> Period Work Schedule (i.e. Week)
Work Schedule Rules
Go to SPRO --> Time Management --->Work Schedules -->Work Schedule Rules and Work Schedules
After doing above mentioned configurations,maintain employee group/subgroup groupings in which you have to define which calendar is applicable for which type of employees for which work schedule.
You will maintain this work schedule in infotype 0007 - Planned Working Time of employee via transaction code - PA30

How to create and maintain a backup catalog, separate from default location, on and external HD

How to create and maintain a backup catalog on a separate hd - separate from default location of the catalog?

Simply copy the LR catalog backup file to another location. It’s quite small and only contains metadata e.g. your edit develop settings, keywords, captions, titles and camera exif data etc.
The LR backup does not physically copy your image files. So make sure you have a separate system backup for your photo files and folders.

How to create and deploy a simple jstl applicaton in weblogic 10.3.3

How to create and deploy a simple jstl applicaton in weblogic 10.3.3

1) Since JSTL libraries are provided as Web application libraries, they must be deployed before the Web application that is using JSTL functionality is deployed. The libraries can be deployed using the Administration Console or with the command-line weblogic.Deployer tool.
Here’s an example of deploying a JSTL 1.2 library using the weblogic.Deployer command-line:
java weblogic.Deployer -adminurl t3://localhost:7001
-user weblogic -password weblogic
-deploy -library
d:/beahome/wlserver_10.3/common/deployable-libraries/jstl-1.2.war
This command deploys the JSTL 1.2 library using the default library-name, specification-version and implementation-version defined by the MANIFEST.MF in the library.
After a library is deployed, the extension-name, specification-version and implementation-version of the library can be found in Administration console. This information can also be found in the MANIFEST.MF file of the library WAR file.
For more information on deploying a Web module refer below URL
http://docs.oracle.com/cd/E15051_01/wls/docs103/deployment/deployunits.html
2) To reference a JSF or JSTL library, a standard web application can define a <library-ref> descriptor in the application’s weblogic.xml file. Here is an example:
<library-ref>
<library-name>jsf</library-name>
<specification-version>1.2</specification-version>
<implementation-version>1.2.0</implementation-version>
<exact-match>false</exact-match>
</library-ref>
For more information on referencing a Web application library refer below URL
http://docs.oracle.com/cd/E15051_01/wls/docs103/programming/libraries.html
3) Create a sample JSP in your application and JSP should look as shown below
<%@ taglib prefix="c" uri="http://java.sun.com/jstl/core" %>
<html>
<head>
<title>TestJSTL</title>
</head>
<body>
<c:set var="topic" value="JSTL" />
<c:out value="${topic}" />
</body>
</html>
4) Create WAR and deploy and test.
Edited by: Murali Veligeti on Jul 26, 2012 9:00 AM

How to create and use mutable array of UInt8

Hello!
If I get it right, UInt8 *buffer, buffer - is a pointer to a start of array?
Then how to create and use mutable array of UInt8 pointers?
The main target is a creation of the module that will store some byte array requests and will send all of them at the propriate moment.

I try
- (void) scheduleRequest:(UInt8 *)request {
if (!scheduledRequests) scheduledRequests = [[NSMutableArray array] retain];
[scheduledRequests addObject:request];
But get warning:"passing argument 1 of 'addObject:' from incompatible pointer type"

Reg: How to create and assign jco in xcm (CRM 5.0)

Similar Messages

Maybe you are looking for