Reg how to retrieve long text

actually the requirement is given below , am stuck at fetching long text ......can anybody help me in retrieving the long text(suppose two or three lines) into single variable and passing it to read_text function module as per the condition
Plz reply ASAP............
i need to combine data from two tables n also add long text field in to the final internal table.
requirement is
IF QPMK- LTEXTKZ = u2018Xu2019 then Fetch the Long Text as
Language = P_SPARCHE,
TEXT ID = u2018QPMTu2019
Text Object = u2018QPMERKALu2019
Text Name = QPMK- MANDT + QPMK-ZAEHLER + QPMK-MKMNR + QPMK-VERSION + Language (single character)
Combine Values in a single internal table such that the table has only QPMK-MKMNR, QPMK-SORTFELD, QPMK-DUMMY20, QPMT-KURZTEXT, QPMT-LTEXTKZ, Long Text

hi abap_sap leaner,
try to avoid using + for combining multiple fields, instead use concatenate and then pass to text name,
then u have to loop line table(which contain long text) and store each value from the loop in a variable of length 1500.
pls refer the following,
hd_name = p_ebeln.
call function 'READ_TEXT'
    exporting
     client                        = sy-mandt
      id                            = 'A01'
      language                      = sy-langu
      name                          = hd_name
      object                        = 'EKKO'
ARCHIVE_HANDLE                = 0
LOCAL_CAT                     = ' '
   importing
     header                        = header
    tables
      lines                         = hd_lines
   exceptions
     id                            = 1
     language                      = 2
     name                          = 3
     not_found                     = 4
     object                        = 5
     reference_check               = 6
     wrong_access_to_archive       = 7
     others                        = 8
here u have to loop hd_lines and store hd_lines-tdline values in a variable for every time the loop executes....
finally the variable contains long text..
hope it will help...
regards..

Similar Messages

How to retrieve long text data

Dear all,
How can i retrieve the long text for document line item
Gone thru this in forum..but unable to get the correct one
some say to use READ_TEXT FM
Pls advise steps
Rgds
Naresh

Hi,
Please find here with link for bringing the long text.
http://scn.sap.com/thread/497205
Regards,
Ramana

How to retrieve long text for a particular record

Hi,
I've been looking through some of the numerous posts relating to reading long texts but I can't seem to find out how to retrieve the necessary parameters for READ_TEXT for a particular record without using the GUI.
Is there a way in ABAP that one could retrieve the parameters that are required to execute READ_TEXT just from one of the fields in the base table. eg. I would like to bring back a list of all materials with their associated long texts. I can run a query on MARA for example and retrieve the necessary material information but I would like to know how I could get the necessary information, for each row in my results, to pass to READ_TEXT.
What information would I need to perform the above, if at all possible?
Thanks in advance,
Charles

You can check out SE75. Here is where the objects and ids are listed/maintained. There is one trick to find the object/id. That is, create the text in the specific transaction. If you are talking about header text for a sales orders, go to VA02 and enter some text and save. Now go to SE16, enter STXH as the table name. On the selection screen for STXH, enter your user name for "created by" and enter the date. Execute. The record that you see is probably the text that you just created. You can see the object, the id, and even how the name is built. In this case, it would be sales order number.
Sometimes where you enter the text, there is a little "scroll" icon under the text editor, clicking that will tell you the object and id. In some cases, this functionality is not there.
Regards,
Rich Heilman

How to print long text in scripts

plzzzzzzzzz answer this qestion
how to print long text in scripts

Hi Kranthi,
You can create Text Id and include that in your script.
For example:
/E TEXT
/: INCLUDE ZTEXT OBJECT TEXT ID ST
Hope this helps.
Please reward if useful.
Thanks,
Srinivasa

Tcode FV50: How to find long text in FI Document line item Before Saving.

Hi,
How to find long text in FI Document line item.
During Parking of the FI document through Tcode FV50 i m giving the some text in the long text not in the text field.
I would like to validate the Long Text Before Saving in user exit "U300" under the "Sunstitution" .
Please anybody can be help me out where exactly this long text is going to be stored or in which internal table or memory id.
Please give me the answer as soon as possible .
Note:- Read_Text function module is not useful. Because Read_text useful after saving document.

Hi Amit,
In application area FINANCIAL ACCOUNTING , go for node LINE ITEM. Here create a step & maintain the prerequisite as per your requirement & in the check you can mention the code or you can direct it to a custom program like ZFI_RGGBR000.
Here while maintaining the check you will get structures BKPF & BSEG in which you will get the desired field you are looking for.
Just try to explore in your system how the other validations are maintained.
After you are done with all your code, you have to run the regeneration program RGUGBR00.
Here utmost care should be taken while running regeneration program, you should select all the checkboxes in the selection screen except GENERATE SETS, GEN SUBSTN ROUTNS IN ALL CLNTS & TRACE PROG. GENERATE CALLS .
Hope this make your doubt clear.
Regards
Abhii

How to create Long Text in Module Pool Program

Hi all,
I want to develop a new module pool program and I want to use Long text screen in this program and also want this text will store in table.I never develop such type of module pool before.This long text will like sales order long text.Please let me know the steps how I can develop such type of program and how I save long text huge data in table.
Thanks & Regards
Nirmal

Hai ,
here you have to use custom control, for this
DATA: line(256) TYPE c,
      text_tab LIKE STANDARD TABLE OF line,
      field LIKE line.
1) Create custom control in your screen
2)   CREATE OBJECT: container EXPORTING container_name = 'TEXTEDIT',   "--> (this is custom control name in screen)
                   editor    EXPORTING parent = container.
3) CALL METHOD editor->get_text_as_stream "This method reads data from custom control , inserts into itab 'text_tab'
         IMPORTING
          text = text_tab.                                       "
      READ TABLE text_tab INTO line INDEX 1. read the text into wa 'line'
if you want more clarity , see 'ABAPDOCU' >ABAP USER DIALOGS>    COMPLEXSCREEN ELEMENTS--> DEMO CUSTOM_CONTROL

How to read long text in Document line item

Hi,
How to read long text in FI Document line item.

Use Read_text function module.
you need to pass
ID
LANGUAGE
NAME
OBJECT to the function moduel
To find the Text id name language and object these are the following steps. Example: FB02
1. goto FB02, Enter Document number
2. from menuselect Goto>Header-->header Text..... New window will be displayed
3. select the Header Text. here you can see all the text.
4. click on the TEXT (which you want to know the Text id) , then press log ICON (you can find in bottom right of the text window) it looks like a rolled paper.
5. in the Next window you will find Text Name. Text ID, Language. etc...
Regards,
Lalit Mohan Gupta.

How to use long texts in explanation tool tip?

Hi ,
Can anyone tell me how to add long text in Explanation tool tip?
I am able to use short OTR texts in explanation tool tip but not able to use long OTR texts.
Thanks and regards,
Vivek Shetty.

For long text
method1
Create TEXT node- general attributes change text type to include text
then you can input text name/text object/text id/language
method2
create PROGRAM LINE node - use FM READ_TEXT to read it to a internal table
then use LOOP or TABLE node to display it
For TEXT module(For foreign language)
Tr-code:smartforms -- choose Text module(not choose form)--create a text module object
then enter smartform Create TEXT node- general attributes change text type to text module
input the text module name which created by above
btw SO10 is just for Scriptform, in smartforms we use text module to replace SO10

Please can someone explain how to retrieve deleted text, I was clearing old text when one came through at the same time so was also deleted.

Can someone please tell me how to retrieve deleted text. i was clearing old texts when a new one came through at the same time and was deleted also. My last update was iOS 8.1.2

You restore from a backup that was created after the text was received but before it was deleted.
But if you literally deleted it right after it came in, then it's not recoverable. Have the other person resend the text.

How to print long text in ALV

i want to print a description in text mode which is 5-6 lines some times it have a blank line also so
how to print in ALV .i m using READ_TEXT function but sumtime it not works when text exceed 4-5 lines
what i sud do.

hi,
there is another way u can use yours internal table field like long text field. that is.
parameters: salno type vbak-vbeln.
data: begin of itab occurs 0,
vbeln type vbak-vbeln,
matnr type vbap-matnr,
longtext type thead occurs 0,
end of itab.
data: itabstxl type standard table of stxl with header line.
select single vbakvbeln vbapmatnr into (itab-vbeln, itab-matnr)
 from vbak inner join vbap
 on vbakvbeln = vbapvbeln
 where vbak~vbeln = salno.
 select single tdobject tdname tdid tdspras from stxl
 into (itabstxl-tdobject,itabstxl-tdname,itabstxl-tdid,itabstxl-tdspras)
 where relid = 'TX'
 and tdobject = 'VBBK'
 and tdname = salno "YOUR OWN TDNAME e,g
 and tdid = 'Z003'
 and tdspras = 'EN'.
call function 'READ_TEXT'
exporting
CLIENT = SY-MANDT
 id = itabstxl-tdid
 language = itabstxl-tdspras
 name = itabstxl-tdname
 object = itabstxl-tdobject
ARCHIVE_HANDLE = 0
LOCAL_CAT = ' '
IMPORTING
HEADER =
tables
 lines = itab-longtext
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
NOT_FOUND = 4
OBJECT = 5
REFERENCE_CHECK = 6
WRONG_ACCESS_TO_ARCHIVE = 7
OTHERS = 8
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
break abaper.
I HOPE THIS WILL SOLVE THIS WILL SOLVE THE PROBLEM OF THE OTHERS AS WELL.

How to display long text in smartforms

Hi experts,
Iam trying to display long text into smartforms.I got the long text into ITAB frm database
in the abap program.In the form interface how to define the variable?In the long text i have 6 lines.
points guaranteed
cheers
kaki

Kaki,
Delcare a table and getting the LONG TEXT is not the right way of doing this.
You create a TEXT object and change the TYPE to INCLUDE TEXT. Once that is done all you have to do specify the parameters of your long text - TEXT ID, TEXT OBJECT and TEXT NAME. These are the same parameters that you use for READ_TEXT funciton. You don't have to fetch the text manually, it happens automatically.
Make sure this is a part of the main window as this might run into multiple pages.
Regards,
Ravi
Note : Please reward the posts that help you.

How to send long text in a mail using FM : SO_NEW_DOCUMENT_SEND_API1

Hi All,
In my BSp application user can enter long text ( can be more than 300 char ) in TextEdit.
problem is as below:
1) i am getting all the text in oninput processing ...
2) using the FM READ_TEXT to get mail template built in SO10.
3) Replacing all dynamic variables in mail template with user enterd text.
4) then passing the data to FM SO_NEW_DOCUMENT_SEND_API1. this FM has table parameter with 255 char ( please check once )
i am able to send the data in mail. But long text more than 256 char is not comming as single paragraph.
For expamle ...user enter the following text in text edit.
Responsible for the development, implementation, and maintenance of human resource information systems (HRIS) associated with the collection, retrieval, accessibility, and usage of employee information for Human Resource department planning and activities. Maintains internal database files and tables, and develops custom reports to meet the requirements of Human Resource management and staff.
in inbox i am getting as below:
Job Description for : Responsible for the development, implementation, and maintenance of human resource information systems (HRIS) associated with the collection, retrieval, accessibility, and usage of employee information for Human Resource depa
Maintains internal database files and tables, and develops custom reports to meet the requirements of Human Resource management and staff.
Job Description for is fixed text from SO10 templete. and remainning text is user text.
some data is missing in mail.
SO10 template is as below :
Job Description for : &INSTRUC1&
&INSTRUC2&
help to solve the above issue.
Regads,
Kishan
Edited by: kishanrao.sap on Oct 11, 2010 3:12 PM

Hi Krishna,
Please use the object_type parameter of tthe FM as 'HTM'.
Then divide the text by append them into the lines of the object_content. In the begining and end make sure you have
 -- in the begining
-- in the end
if i want to type the text in one para " My name is Imran and i am an ABAP developer".
CLEAR: WA_OBJECT_CONTENT.
WA_OBJECT_CONTENT-line = '<html>'<body> My name is Imran.
APPEND WA_OBJECT_CONTENT TO T_OBJECT_CONTENT.
CLEAR WA_OBJECT_CONTENT.
WA_OBJECT_CONTENT-line = ' and i am an ABAP developer</body><html;>'.
APPEND WA_OBJECT_CONTENT TO T_OBJECT_CONTENT.
Hope this helps you.
Regards
Imran.

How to update long text in symptoms/problems ?

Hi All,
Can anybody help me regarding how to update the long text of a symptom/problem?
Please help.
Regards,
Jeetu

Hi Jeetu,
Can you Please elaborate your query.
Are you talking about Problem/solutions created using Tcode: IS01( used in service scenario)
Or
The Text Management i.e. Text Types
Regards.
Shalini Chauhan

How to display Long text in a JLabel with multiline??

Hi,
Suppose I have a label that displays a long text....
""This is an example label that displays long text, how to break the line????.........""
how to display it like below with one label?
""This is an example label
that displays long text, how
to break the line????.........""
Thanks

so basically do this
JLabel myLabel = new JLabel();
String theText = "<html>This is an example label 
that displays long text, how 
to break the line????.........</html>";
myLabel.setText(theText);Obivously, u dont have to use a separate string, u could just call setText or pass it into the JLabel constructor, i just separated it to make it easier to see what your supposed to do.
GOod Luck

How to display Long text in alv output

Hi,
I have developed an ALV report.It is displaying the output.
There is another requirment for alv output text field as below
From the long text fields show only the first 20 characters and afterwards the long text icon. If the icon is clicked open the long text display screen.
Please give your suggestion how to work on this requirement.
Thanks in advance

Hi,
Create a hotspot for the long text column of ALV.
When user clicks on the hotspot, handle the event to display long text screen.
You may refer sample program of hotspot ALV :
Goto SE38
Type BCALV*
Click F4
search for HOTSPOT or EVENTS & you will get a sample program.
Best regards,
Prashant

Reg how to retrieve long text

Similar Messages

Maybe you are looking for