Reg : I need help on function module/BAPI

Hi Guru's,
I want to pass plant address number in BAPI "BAPI_PO_CREATE1" but i found that to pass address number for vendor..
Please guide me to pass plant address field in purchase creation bapi..
Regards
P.Senthil Kumar

Hi Senthil,
Check this link,
Re: BAPI_PO_CREATE1

Similar Messages

Need Help with Function Module or BAPI for Stock Requirements & PIRs

Hello,
         I am working on making changes to a Report which should be displaying the PIR (Planned Independant Requirements) Quantities as well as Stock Requirements for SOs & STOs for below Type of Materials for the Given Date.
1. Planning Materials
2. Planned SKUs (that is Materials which do not have a Planning Material attached to them).
        In the Current Logic, we are using an FM REQUIREMENTS_ALLOCATION which fetches the Requirements only for the Planning Materials. It does not work for Planned SKUs.
So, is there any Function Module / BAPI which serves this Purpose for both types of Materisls?
   Also, I've managed to Find out two Function Modules which I thought might be useful but still need confirmation regarding the same.
MD_STOCK_REQUIREMENTS_LIST_API and
BAPI_MATERIAL_MRP_LIST
        Please suggest any other FM if available for this Requirement.
Thanks and Regards,
Venkat Phani Prasad Konduri

Basically, here is what my scenario is. I have two Types of Materials which have a Planning Material attached to it. and the Other Category is that it doesn't have a Planning Material attached to it. So, we call it a Planned SKU. That is a Material planned at the SKU level.
          Now, the Issue is , the Function Module REQUIREMENTS_ALLOCATION doesn't work for the Plannd SKUs but it only works for the Planning Material. Now, based on this Function Module, we are populating the Data for the Planning Materials of Material Type ZPLN. Similarly, is there any we can make this FM work for a Material which is planning at its own Level.
          Please help me in this Regard.
Thanks and Regards,
Venkat Phani Prasad Konduri

Reg:Howto create checkboxes in function module(bapi)

Hai ALl
I have one senario .in i need to create check boxes in functionmodule . for that i have to write the code.
could any body suggest me.
how to do this senario in FM
thanks and regards,
Chaitanya

Use data Element : GLX_XFELD ( General Checkbox ) for checkbox..
For check box... if box is checked then value is 'X' else
space.
but in function module it doesn;t matter whether u use data element for checkbox... u can use char type variable of length 1.
and inside code u can check..
v_char1 = 'X'. : it means checkbox is checked.
v_char1 = space " it means checkbox not checked.
Reward if useful
regards
Prax

Function Module/BAPI to check if material is available in the warehouse

Hi all,
I have a requirement where i get the input as material number and i need to check if the material is available in stock and return the quantity of stock available. Do we have a Function Module/BAPI that takes the input as material number and tells if the material is available in stock or not.
The material can be a simple finished product, raw material or BOM. The function module should take the input as material number and should return if it is available in stock and the quantity that is available.
I donu2019t know if this is called ATP. Do we have a standard function module available for that?
Kindly help.
Regards,
Jessica Sam.

Thanks Venu for immediate reply,
I saw the BAPI and unable to figure out what paramters I should fill.
Plant, Material and Quantity I know. But rest of them like
Check Rule, STGE_LOC, batch, Doc_number, WBS_ELEM, STOCK_IND,
DEC_FOR_ROUNDING, DEC_FOR_ROUNDING_X, READ_ATP_LOCK, READ_ATP_LOC_X & MATERIAL_EVG.
In the BAPI documentation I dint find how to fill these paramters. Can you help me with hat I need to fill in the input paramters.
Regards,
Jessica Sam

Function module/BAPI to release a Business partner in GTS

Dear experts,
I have a requirement where in I need to release business partners programmatically. I request you to let me know if any function modules/BAPIs or any other method is available (except BDC).
I know the manual process of releasing them, and we were restricted to use BDC.
Thanks in advance.
Best Regards,
Vishal

Hello Vishal,
Currently the release logic is inside subroutine instead of FM or BAPI.
You could refer to:
Report : /SAPSLL/LCON_BLOCKED_BPF01
Form : deblock_partner_masters
Best regards,
Vincent

How to create Billing Plan in sales order using Function module /BAPI

hi,
How to create Billing Plan in sales order using Function module /BAPI
i hv check few FM such
BILLING_SCHEDULE_READ
BILLING_SCHEDULE_GET_NUMBER
BILLING_SCHEDULE_SAVE
But unable to create billing plan for a sales order.....any other method to create???

Hi,
Use this link.
Create sales order with billing plan via LSMW and BAPI BUS2032
BAPI or Function to update Billing Plan in Sales Order Items
Hope this will help you.
Regards,
Vijay

Need of a function module to give a pop up of certain values

Hi Experts,
I am need of an function module to give a pop up of values present in an internal table, just like an F4 help. Please advise.
Thanks in advance,
Vivenchandar R

hi Viven,
check the program <b>BALV_POPUP_TO_SELECT</b> to see how the function module <b>REUSE_ALV_POPUP_TO_SELECT</b> can be used for your requirement.
Hope this helps,
Sajan Joseph.

Function Module/BAPI For Material Document

Dear All,
I am looking for a function Module/BAPI to get details relevant for a Material Document.
I can get those details using table MSEG & MKPF, but still looking for a Function Module.
Kindly help.

Hi
Try with these BAPI's
BAPI_GOODSMVT_GETITEMS
BAPI_GOODSMVT_GETDETAIL
Regards
Brahmaji

Function module/BAPI for executing VD51/VD52 transactions

Hi
Warm greetings to all,
I require a function module/BAPI for executing VD51/VD52 transactions. Can anyone help on this
Sreekanth

Hi Sreekanth,
Use this.
There is an FM which is used by standard transaction
'RV_CUSTOMER_MATERIAL_UPDATE' .
Ex Code -
CALL FUNCTION 'RV_CUSTOMER_MATERIAL_UPDATE'
IN UPDATE TASK
TABLES
XKNMT_TAB = XKNMT
YKNMT_TAB = YKNMT
TCATALOG_TAB = LT_CATALOG.
commit work.
Regards,
Vijay

Function module / BAPI for FBRA IN 3.1 VERSION?

Hello all,
Could you please suggest Function module / BAPI for FBRA (Reverse and cancel) transaction in 3.1 version.
Thanks,
Subba

Please check this FM perhaps it may help.
CALL_FB08
REVERSE_CLEARING
RESET_CLEARED_ITEMS_BDC_WRITE.
Regards
Kiran Sure

How to find Exits in Function Module & BAPI

Hi,
How to find exits in Function Module & BAPI.
Thanks In advance

Hi,
i ve a standard FM IDOC_INPUT_SALESORDER_CREATEFR which creates sales order using BAPI (inbound process).
Now my requirement is to check for some custom segment field if its not initial i ve to change item category field in line item for sales order.
could u pls help me in this.
Thanks in advance.

Third party system call function module/BAPI through RFC to update Z table

Dear Friends,
We have a third party system which directly inserts a Z table in SAP through its programming, which is an auditing issue.
We want the third party system should call function module/BAPI through RFC so that the Z table gets updated.
waiting for inputs..
Thanks,
Kumar

if third party system is capable of making Remote Function call, then writing a Function module & making it remote enable is not difficult task in ABAP.
You may have to prepare specifications first to decide if third party system is going to Read, insert, update, delete records from Zee table.

Function Module/BAPI for Posting with Residual Clearing

Hello All,
I want to know whether any Function Module/BAPI avaialble for posting with residual clearing (FB05). Can we do residual clearing using the FM "Posting_Interface_Clearing"?
Please let me know how this can be handled.
Thanks in advance.
With Regards,
Senthil.

Hi senthil ,
Look at these threads
POSTING_INTERFACE_CLEARING
bapi for Transfer posting with clearing
BAPI_ACC_GL_POSTING_POST for FB05
Question about POSTING_INTERFACE_CLEARING and POSTING_INTERFACE_START
Regards,
Gaurav

Function Module/BAPI for updating Document Status.

Hi Experts,
Is there any Function Module/BAPI available for updating the document status ?
Thank You,
Radhika.

unresolved!

Function Module / BAPI for Creating Material freight Group

Hi All,
Can anyone tell me the Function Module / Bapi for creating material freight group.
Regards,
Raj.

Bapi for creating material freight group. :: You actually use mm01 or mm02 to change data for material flight.
So you can use BAPI for mm02 and mm01
For Ex:
BAPI_MATERIAL_SAVEDATA
Hope this helps

Reg : I need help on function module/BAPI

Similar Messages

Maybe you are looking for