Reg importing exported ccsexport files from 9.3.1 into 11.1.2.1

Hi,
I have exported cssimportexport.properties file of hyperion system 9.3.1
Now i have exported .csv files with the following names(export MSAD and export Native).
I want them to be moved into hyperion system 11.1.2.1 using LCM.
Pl. suggest me the steps to be followed in importing the .CSV files into my system 11.1.2.1.
Cheers
Praveen

The LCM documentation is available at http://download.oracle.com/docs/cd/E17236_01/epm.1112/epm_lifecycle_management/launch.htm
Also if you are new to LCM then it is worth having a look at the following Oracle by Example which will take you through the steps - http://www.oracle.com/webfolder/technetwork/tutorials/obe/hyp/PLN11.1.2_LCM/index.html
It may also be worth extracting some test provisioning out of your 11.1.2.1 environment first to make sure you have the format of the file correct.
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

I need help! when I am importing my NEF files from my D3300 camera into lightroom 5 and try to use the "copy as DNG" button I always get an error message saying that "saying the file is not recognized by the raw format support"

I need help! when I am importing my NEF Raw files from my D3300 camera into lightroom 5 and try to use the "copy as DNG" button I always get an error message saying that "saying the file is not recognized by the raw format support". The whole purpose of that button is so that the file can be recognized... How can I make the "copy as DNG" button work as it is supposed too?? Thank you

Thank you for responding. So I essentially will never be able to use that button in lightroom 5? do I need to get LR 6? Will there ever be an update for LR 5 that will enable me to use it?
Does DNG Converter work within LR or do I have to upload pictures to my computer and then make a second copy in DNG format. and then go into LR and use them?
Thank you @dj_paige

Difficulty import/export AVCHD files from a Panasonic SD-900 camera

Hi there,
I'm having workflow difficulties using AVCHD (.MTS) files from a Panasonic SD-900 camera.
Footage was shot at 1080/25p. I use the Log and Transfer tool to bring the footage in.
The browser window confirms 1920 x 1080, but says interlaced. I change that to progressive. I put a clip on the timeline, and select 'Yes' so that the sequence conforms to the same settings as the clip.
On export, using Quicktime Conversion, the Quicktime dialog box says the Size is 850x478 (current). Something was wrong, as the sequence should have been 1920x1080.
I closed the Quicktime Conversion box, and instead tried Export > Quicktime Movie. Selected 1920x1080 25p on the drop-down menu. The exported movie was 1920x1080, but it looked like it was half resolution, with jagged edges.
So, I did something wrong. Thanks to anyone who can set me straight.

Hi Veg,
I would suggest that you edit the footage in the format that it was recorded in . In other words don't change field dominance and edit with your footage interlaced. (You can de interlace later if your output is for web or computer viewing)
On export, using Quicktime Conversion, the Quicktime dialog box says the >Size is 850x478 (current). Something was wrong, as the sequence should have been 1920x1080.
The "current size" is the size in the canvas so don't worry about that.
Format: Apple ProRes 422 (HQ), 1920 x 1080 (1888 x 1062), millions
16-bit Integer (Little Endian), Stereo, 48.000 kHz
That second resolution in parenthesis might be a clue to the jaggies.
Again, the resolution is what Quicktime Player is displaying at the time.
25p AVCHD does not work.
It works but not in the way that you were expecting, it is actually interlaced footage.
Can you tell us what your footage is going to be output for? if it's web or computer viewing you can de interlace in compressor. Or if it's going to end up on a DVD for TV viewing you can leave it interlaced.
Either way I think you should export using Quicktime movie "current settings" and use compressor to output to the settings of your choice.
DM

How can I import an mp4 file from my video camera into my iPad ?

I'm totally new to this iPad world. I would like to import a file from my video camera to edit it in iMovies. I tried adding the file through iTunes, and it appeared to transfer the file to my iPad, but I can't find any way to open the file, not even to play it. Any help would be appreciated.

The time should already be shown on the status bar, but you can't add the day and/or date to it - if you would like to have them then you coul leave feedback for Apple : http://www.apple.com/feedback/ipad.html
If you want to copy an attachment from an email then you can't do that directly from the Mail app. If the email is still on your provider's server then you should be able to read the email on your provider's site via a browser on your computer and save it from there directly on your computer. Otherwise you will need to copy the file from the Mail app to another app on your iPad via the 'open in' function. Do you have an app on your iPad that supports the type of file that you want to copy ? How you then copy the file to your computer will depend upon what the app that you copy it to supports - different apps have different ways of copying their content to/from a computer e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via your wifi network, dropbox etc

Getting an error while importing/exporting the universe from my BO Designer

Hi,
   I am facing a issue while importing/exporting the universe from my BO Designer to the Server.The error is mentioned below.
   'File Repository Server Input is down'
   Once I click the OK button on this error message, it displays the message
   'Could not import the Universe'.
I tried the check the status of the File Repository Server (Ouput and Input) and also the of the Root Directory on the Physical Server and also my machine.They all have read-write access.
Installed Version of the Universe Designer Client: Business Object XI Release 2 SP3
Installed Version of the BO Enterprise Server: Business Object XI Release 2 SP2
Can you please help me to resolve the issue

Hi,
   The step you have mentioned may not be applicable to my issue as one of my colleagues can import/export the universe from the same server
The second thing is that a DB2 Client v9 is installed on both mine and my colleagues system.The Designer software can recognise the DB2 drivers on his system but it cannot recognise the same drivers on my system.I even checked the versions of the BO software installed on his and my system and they are same.
The only difference is that his machine is a Windows XP Machine and mine is a Network Desktop.
Will any of the above two things will affect the operation of the BO Designer.
Thanks
Prabhakar Korada

Import an FLV file from Adobe Connect into Premiere Elements 12?

The Adobe Connect support staff recommended that we use Adobe Premiere Elements to edit the FLV file that we exported out of their software. We purchased Adobe Premiere Elements 12 based on that advice. Now we see that FLV files are not on the list of supported import files.
How can I import an FLV file from Adobe Connect into Adobe Premiere Elements 12 for editing?

Welcome to the forum.
Over the years, I have used Moyea's Flash Importer plug-in for PrPro, and it has worked perfectly. With about PrPro CS 4, IIRC, Adobe did add an FLV Importer, so Moyea began to suspend development of that plug-in. Then, with the release of the CC version of PrPro, they dropped FLV completely.
Now, Moyea does have other programs, but I do not know if any of them are plug-ins for PrE. However, many of their programs can create, edit and output FLV.
There is also a (free, if memory serves) FLV converter, FLV to AVI, which I used to convert FLV files, before I discovered the Moyea plug-in for my PrPro.
I would look into Moyea, to see if there is anything, that will work as a plug-in to PrE, http://www.video-to-flash.com/products/, and if not, explore a program, such as FLV to AVI: http://www.pazera-software.com/products/flv-to-avi-converter/
Good luck,
Hunt

Feature request - Export Draw files from Creative Cloud to Illustrator

It's really annoying that you can't export Draw files from assets.adobe.com to Illustrator CC, that you have to do this from your iPad. If my battery is flat, or I have left my iPad somewhere I can only export REALLY crappy low res jpgs or pngs. Coupled with the recent issues the Send to Illustrator function has suffered it's annoying that work is being locked up in this way. I understand that it's important for Adobe to protect their products, but these restrictions are making workflows really hard work. It would be ideal if we could access the mobile files using the Place tool in inDesign etc too so we could drop a drawing file in to a document in the same way we can a regular image or ai/psd file

This is a bug. Will update this thread once it is fixed.

Export RAW files from iPad to NAS

Hello everyone,
I've been a while wondering if it is possible to quit personal computers for my Photo Workflow, that involves RAW file formats. The ideal workflow should be like this:
Take a photo in RAW+JPEG.
Import the photo in an iPad Air 2 with iOS 8 via SD Card Adapter.
Work with the image with the existing RAW editing apps, Like Photogene 4 or SnapSeed.
Save the original RAW and edited stuff in a Synology NAS.
The problem is the fourth step. It's impossible for me to extract them intact from iPad to NAS. I had recently a false positive when I found FileBrowser, which is a Finder-like app that let's you take RAWs from an album and copy to a network storage. BUT surprise! The filesize of that files is EXACTLY the same of the JPGs, around 2,5 MB, so these .CR2 files have been altered.
¿Is there some way to export RAW files from an iPad?

The following claims to transfer RAW. Not sure that it will work in the circumstance you describe but may be something to check out: http://www.photosync-app.com/photosync/en/features.html#cluster_1

Will FC X import XDCAM.mov files FROM JVC, not XDCAM EX ?

Will FC X import XDCAM.mov files FROM JVC, not XDCAM EX ?

Hi Kenneth,
We work with Sony XDCAM, and as long as I know you can only export it to .MXF or .MP4 (XDCAM EX).
Kind Regards,
Roberio

Having a prob importing a large file from a sony DR 60 external drive via log a transfer in FCP this is the first time this has happened have the sony plug. HDisc compatibility is sorted as the first 2 short clips are imported. Any advice will be welcome

problem importing a large file from a Sony DR60 external drive to FCP. Never had a problem before first two shot clips are captured in log and transfer but the larger 2 hour clip only downloads the first few seconds. Any advice?

I can think of 2 things to check.
1. The Scratch disc has plenty of space.
2. System Settings>Scratch Disc does not have a restriction in the Limit Capture/Export File Size Segment To:
Al

Importing All the files from a folder at a time

Hi....
Can any body tell me how to import set of files from a folder into IDM.
It is becoming very difficult to import the files one after other....
Waiting for Reply....
Thanks in advance..........

We used an ant script to build an XML file that will contain the files. The script is configured to use the folder structure of our CVS repository.
We'd checkout our XML module and then run the build script and import the resulting init file.
Code to the script is below -- caveat emptor. You'll need to change the folder structure to suit your own environment.
<?xml version="1.0" encoding="UTF-8"?>
<project basedir="." default="all" name="MyInit">
    <target name="init">
        <property location="." name="src.dir"/>
        <property location="." name="dest.dir"/>
        <property name="project.name" value="${ant.project.name}"/>
        <property location="${dest.dir}/MyInit.xml" name="MyInit.output"/>
        <property name="source.configuration" value="${dest.dir}/configuration"/>
        <property name="source.emailTemplate" value="${dest.dir}/emailTemplate"/>
        <property name="source.forms" value="${dest.dir}/forms"/>
        <property name="source.reports" value="${dest.dir}/reports"/>
        <property name="source.resource" value="${dest.dir}/resource"/>
        <property name="source.rules" value="${dest.dir}/rules"/>
        <property name="source.workflow" value="${dest.dir}/workflow"/>
        
        <path id="configuration.path">
            <fileset dir="${source.configuration}" >
               <include name="*.xml" />
            </fileset>
         </path>
         <property name="cp" refid="configuration.path" />
         <path id="emailTemplate.path">
            <fileset dir="${source.emailTemplate}" >
               <include name="*.xml" />
            </fileset>
         </path>
         <property name="ep" refid="emailTemplate.path" />
         <path id="forms.path">
            <fileset dir="${source.forms}" >
               <include name="*.xml" />
            </fileset>
         </path>
         <property name="fp" refid="forms.path" />
        <path id="reports.path">
            <fileset dir="${source.reports}" >
               <include name="*.xml" />
            </fileset>
         </path>
         <property name="rptp" refid="reports.path" />
        <path id="resource.path">
            <fileset dir="${source.resource}" >
               <include name="*.xml" />
            </fileset>
         </path>
         <property name="rep" refid="resource.path" />
        <path id="rules.path">
            <fileset dir="${source.rules}" >
               <include name="*.xml" />
            </fileset>
         </path>
         <property name="rp" refid="rules.path" />
        <path id="workflow.path">
            <fileset dir="${source.workflow}" >
               <include name="*.xml" />
            </fileset>
         </path>
         <property name="wp" refid="workflow.path" />
        
         <path id="source.path">
            <pathelement location="${src.dir}" />
         </path>
         <property name="sp" refid="source.path" />
    </target>
    <target depends="init" name="win_init">
        
        <property name="importfile.path" value="${sp}"/>
    </target>
    <target depends="init" name="make">
    
        <echo file="${MyInit.output}" append="false"><?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE Waveset PUBLIC 'waveset.dtd' 'waveset.dtd'>
<Waveset>
${cp}
${ep}
${fp}
${rptp}
${rp}
${wp}
</Waveset>
        </echo>
     
     <replace file="${MyInit.output}"
              token = "${sp}"
              value = "<ImportCommand name='include' file='${importfile.path}" />
     
     <replace file="${MyInit.output}"
              token = "${file.separator}"
              value = "/" />
    <replace file="${MyInit.output}"
              token = "${path.separator}"
              value = "${line.separator}" />
    <replace file="${MyInit.output}"
              token = ".xml"
              value = ".xml'/>" />
    </target>
    <target depends="init,win_init,clean,make" description="Build everything." name="all"/>
    <target depends="init" description="Clean all build products." name="clean">
        <delete file="${MyInit.output}"/>
    </target>
</project>

When importing an MXF file from a CF card, I can only get :30 of the original clip. What am I doing wrong?

When importing MXF video file from a CF card to Final Cut 6, I can only import :30 of it. Why am I limited to :30 and how do I get the entire clip?

That's the WRONG WAY! You have to use Log and Transfer, like Michael says. Here's A tutorial on how to deal with Tapeless in FCP
<a href=http://library.creativecow.net/ross_shane/tapeless-workflow_fcp-7/1 target=_blank>Tapeless Workflow for FCP 7 Tutorial</a>
BUT NOTE! If this is MXF from a CANON camera...their new 305 camera...you not only need a plugin to get it to work (they either include it with the camera, or you have to go to the website... the Canon Log and Transfer plugin), it also might only work with FCP 7. Because the camera is brand spankin new. Try the plugin first...well, if this is from that Canon camera.

After I import a movie file from the camera memory card, Imovie 10.0.1 acts as if the memory card is empty though I know it isn't.... I can't import that file to iMovie again.. is that the way it worksnow? Thank you, Filippo

On IMac 10.9 After I import a movie file from the camera memory card to Imovie 10.0.1 it acts as if the memory card is empty though I know it isn't.... I can't import that file to iMovie again.. is that the way it works now? Anyone know? Thanks, Filippo

I would like to know this too. I imported a lot of files, then Imovie crashed. I went back in and they are not in imovie at all.
I reconnected the camcorder to import again and though they are still on the camcorder, I no longer see them in the available list of files to import. I'm sure there is some sort of simple setting somewhere that reveals all files even if it thinks they are imported.
Thanks

ITunes 11 won't import .mov video files from external hard drive but will from internal.

Hi Everyone
I'm having a problem with iTunes 11.0.1. I can't import .mov video files stored on an external hard drive. I can however import .m4v files from the same external drive. Using either the add to library option or dragging files from the finder.
I can add .mov files from the internal though. Strange I know.
The reason behind this posting is that I'm using iFlicks to convert my TV and movies from my external drive for Apple TV and add all relevent meta data, keeping the files on the external drive and having iTunes link to them.
I would like to be able to simply create a general iTune compatiable file using iFlicks which only takes a minute or two per file to convert. I'm currently converting them to .m4v just for the sack of being able to import them into iTunes from an external drive takes 45 minutes per file.
Has anybody else had this problem? Any ideas on a fix to allow me to import .mov files from an external drive into iTunes without copying it to the iTune library file.
Many Thanks
Dave

This might be worth a shot - basically seeing if Vista permissions could be the culprit.
Give yourself FULL control and ownership of the exHD, let's call it M:
How to Take Ownership and Grant Permissions in Windows Vista
Take control of the top level folder and ALL subfolders.
Try creating a new blank ITL file on M: by pressing *and holding* the shift key while itunes starts. See if you can add everything again.

How do I import my video files from old iPhoto - in time machine - to new iPhoto? Photoes came across, video said incompatible.

how do I import my video files from old iPhoto - in time machine - to new iPhoto? Photoes came across, video said incompatible.
i have moved from a mac pro to a mac mini,
Mini now has mavericks and latest iLife stuff, I clicked import, was all good, then at end, no videos came across.
Is Mavericks,/iPhoto having a compatibiltiy issue with some video formats....???
Your help is appreciated gang.: )

Please describe exactly what you did. In moving to a new machine no importing is involved. The best way is to simply connect the two computers together and drag the iPhoto library from the old one to the pictures folder go the new one and launch iPhoto
LN

Reg importing exported ccsexport files from 9.3.1 into 11.1.2.1

Similar Messages

Maybe you are looking for