REG :INFO OBJECTS
HI,
A characteristic infoobject defined in the system cannot be included in the Infocube definition. Why?
please answer this question?
thanks
DJ
Yes u can include it in a dimension of the cube.
Chk the link
http://help.sap.com/saphelp_nw04s/helpdata/en/c8/e92637c2cbf357e10000009b38f936/frameset.htm
Regards,
B
Similar Messages
-
Reg: No enries in SID table of attribute of a Master data info object
Hello SAP Gurus!!!
I Hope everyone is doing good.
I found some issues , when i loaded master data into master data info object in sap bi.
I have an object which is holding master data (master data info object)---ZEMPID(employee id)
I have attributes for this object are : Emp name , Emp Phone number
I loaded master data attributes into ZEMPID. I could see some entries in SID table of ZEMPID char info object .
But i am unable to see the entries in SID table of Emp name , which is a attribute of master data info object.
According to my knowledge whenver we load data into sap bi , automatically sid values will get generated for that characterstic info object.
so here in this case Emp name is also a char info object , so whenever we load the data into master data info object , we have to see the entries in SID table of Emp name also .But i am unable to see the entries in the SID table of Emp name. .
So what might be the problem ?
Awaiting for your valuable answers!!!
Cheers!!Hi Rajavamshi,
You are right whenever we load data in BI, it will create SIDs for info objects.
But it will create SID in 'S Table' not in X/Y - Table.
If master data is enabled for Emp name then it will create SID in X/Y table. I think the master data is not enabled for attribute(Emp Name).
Please check in S Table, the SIDs will be there.
If it is not the case, activate the attributes info objects and EMPID info object and load the master data and run ACR for EMP ID.
If it is not working still, then do master data check in RSRV.
Regards,
Vignesh.B -
Info object in production server
Can we activate an inffoobject in production server ?
how to activate it?
thanks in advanceHi ramakrishna,
You can activate the info object in production server directly if you have authorizations.
Is it a Standard or Customized,any It's better to activate object in Dev and Transport it to production.
Hope it helps you ..
Reg
Pra -
Error while creating info object
error while creating info object a character
Info object may be a maximum of 000060 digits...... what would be the error?
Thanks ALLHi,
The maximum length supported by one CHAR type infoobject is 60. Check whether you have assigned more.
If you have to load more length ( more than 60) split the total thing into different infoobjects. Create different infoobjects and split the total thing into them - like 1st 60 char in 1st infoobject, char 61-120 in 2nd infoobject and so on. Then you can again concatenate them.
Thanks,
Indrashis -
Error while activating the info object.
Hi,
While activating one of the info objects, i am getting the following error message:
Characteristic 0BP_GRP: Cannot switch off InfoProvider property
Message no. R7B289
Diagnosis
The characteristic receives master data from other objects (for example, transformations or update rules). Therefore it is necessary to select the characteristic as an InfoProvider.
Procedure
If you want to deselect the Characteristic Is InfoProvider indicator, delete the corresponding objects in the data flow.
Thanks and Regards
Niren.Hi Niren,
Check the below thread..
Howto Remove 0Employee Char from my InfoArea
Hope it helps..
Regards,
Ramki. -
How to activate the Info object catalog in Business content
Hi,
While trying to activate the Info object catalog, I found that some of the info objects under this catalog was earlier activated by some other developer. I brought this catalog (0SALES_CHA01) over to the Business content activation panel ( with only 'necessary object settings ) and all the info objects that also came along were de-selected since I didn't want to install those again). When I tried to install these I get an error indicating that some of the info object in question are not already active.. and ultimately the catalog doesnt get activated , although more than half of its infoobjects are already active under the '0CHANOTASSIGNED' node.
Please let me know whether I can get only the Catalog activated without getting any existing activated info object merged or installing those which are not already activated.
Thanks
ArunavaHello Arunava,
Just drag the infoobject catalog as u did earlier to the left in the bus cont installation screen with "only necessary object" option.
Dont try to deselect any object. Go ahead with the default options and install in background.
Now you can check for the available objects in the catalog. if you have some objects missing, and available in unassigned node,double click on the newly installed infoobject catalog, select the required objects (which are not yet assigned to this) from the left side and bring them to the right side.
this will make the unassigned objects assigned to the required catalog.
Hope it helps..
(please dont forget to reward points to helpful answers) -
BI end routine at transformation to populate info object by vlookup attribu
Hi ,
I am APO consultant working in Bi routines and I have the follwoing situation and need some guidance in ABAP code (routine) .
We sales info from markets as flat filea snd lod them into cubes. One of the filed is file is External sales Group: ZEXSGRP. This is an attribute or Sales Group info object ZSLSGRP.
We get external sales group populated in file when we upload the file into cube - I want to use end routine to vlook up the info infoobject table ZSLSGRP - all the external sales groups and use the matching value to write Sales Group (ZSLSGRP).Example if ZSLSGRP is NAM and it attribute is ZEXSGRP and has value N0000032. The file gets value N0000032 so the end routine should look all attribute of all infoobject ZSLSGRP and match the value and populate in example above it populates NAM.
Hope i am clear - can any help with this.
thaks
VarmaReplace your select statement ,
SELECT *
FROM /BIC/PZF31SALOFF
INTO CORRESPONDING FIELDS OF TABLE it_tab4.
instead of selecting all the fields , pick only the fields which are required.(one good performance improvement)
SELECT /BIC/PZF31SALOFF comp_code
FROM /BIC/PZF31SALOFF
INTO CORRESPONDING FIELDS OF TABLE it_tab4.
Remove the line below , this is not required
MODIFY it_tab4 FROM wa_tab4. -
Adding new info object to a cube.
Hi Friends,
This is a BI SYSTEM, we have a cube with existing data in it. Now we need to add a new info object to the dimension of the cube.
Now we can add the info object to the cube in 2 ways.
1. remodeling the cube
2. select the cube in RSA1 , RIGHT CLICK, IN CHANGE MODE add the info object to the dimension of the cube.
now my question is why we have the concept of remodeling, when we were able to add the info objects to the dimensions of the cube in the change mode.
kindly explain me in detail.
thanks.
Please search the forum
Edited by: Pravender on Mar 16, 2011 2:58 PMHi Soumya,
If you go by option 2 of adding Infoobject in Cube by going in change mode and adding the respective Infoobject in Dimension,
Then you have to delete Data first from the Infocube in order to add infoobject by this option. Otherwise it won't allow you to add infoobject.
But by remodelling option you can add the infoobject in dimension without deleting any data from Cube. But this option has its own limitations too.
Please refer the following link for Remodelling Concept:-
http://help.sap.com/saphelp_nw04s/helpdata/en/58/85e5414f070640e10000000a1550b0/content.htm
Hope it helps.
Regards,
Hardik -
Info-Object data not appearing in Multiprovider
Guys,
I got a problem here. I have created a multiprovider based on master data and cube. My master data has certain attributes which are not present in the cube. I want to display data for those fields in the multiprovider.
I can see cube data in the multiprovider view but i don't see any data coming from the master data info-object. 0INFOPROV shows only cube name.
Is there something i am missing or any setting that i need to do ?
Points will be awarded to the helpful answers.
Thx,
SoumyaHi All,
Multiprovider always has issues when you are trying to link two objects vary in their structure. Lets say if you are creating a multi-provider on a ODS object & Cube or Cube & Info-object. Lets say CHAR X is available in Cube and not in ODS or master data.
Any selection on char X will not fetch you any record from ODS / master data as it is not available in ODS / master data. You need to add the characteristic to ODS / master data and update the same way as you are updating it in the cube. Otherwise don't make any selections based on this characteristic.
Hope it helps.
Thanks
Soumya -
Goods receipt number and purchase invoice nubember info objects
hi experts
i have the requirement to build the report with the info objects of goods receipt number(document) , purchase invoice numbers and purchase document numbers from standard cubes or ods.i have checked in inventory management and purchasing cubes&ods i am not success got the purchase document number it is from ods (0PUR_O02) the InfoObject is 0OI_EBELN(purchasing document number),like this i want InfoObject for Goods receipt number and purchase invoices from where can i get these fields.
if u need any more information i will provide.
thanks and regards
Sreenivas.Hi Ahamed,
thanks for your reply,do u have any information about purchase invoice number.
i need one more help from you, how to find out Debtors turnover ratio from Acceount Receivables(AR) (or)G/L (General ledger account).is there any standard queries from Business content,i was checked and i was failed,if you have any solution for this please let me know.
thanks and regards
Sreenivas. -
" COMBINING TWO INFO-OBJECTS ! "
Hai Friends ,
I am having 2 info-objects : Info-object1 - length 60, Info-objec2 - Length -30. I have to combine these two Info-objects . Let anyone know me the procedure forcombining these two Info-objects : Info-object1,Info-object2 .
Waiting for your reply .Hi,
Create the infoobject which contain the string.
if CHAR1 is 30 and CHAR2 is 60, your new infoobject should be 90.
In the transformation/update rule you concatenate the two infoobject.
Concatenate is a function which is available in the formula builder, no ABAP needed
In the Routine you reference at the uploaded Data with:
concatenate COMM_STRUCTURE-infoobject1
COMM_STRUCTURE-Infoobject2
into RESULT.
Thanks & Regards,
Vipin -
How to use ZMATERIAL info object attribute in existing report
Hi all,
Using generic extraction we have created data source related that data source we have created navigational attribute for
info object ZMATERIAL. Data available for ZMATERIAL info objects. Now ZMATERIAL info object related navigational attribute
want to use in existing report.
For eg. Already sales report developed in that 0MATERIAL only using now i required to use ZMATERIAL also in that report
My requirment is ZMATERIAL related navigational attribute want to use in exisiting report, how to do that? kindly guide me.
ThanksGoto CMOD
Enter the projname
select component
click on display
--seelct the Fm EXIT_SAPLRSAP_002
-- double click on include program to insert your code double click on ZXRSAU02
Enter your code below
CASE i_datasource.
Sample code ...
WHEN '0MATERIAL_ATTR'.
LOOP AT i_t_data INTO lt_mara.
l_tabix = sy-tabix.
SELECT SINGLE ZCOMP ZSUPP ZPUBL ZIMPR ZFORM ZSUBJ ZSDET ZAUTH ZREDT ZPUDT ZADAT
INTO (lt_mara-zcomp, lt_mara-zsupp, lt_mara-zpubl,
lt_mara-zimpr, lt_mara-zsubj, lt_mara-zsdet,
lt_mara-zauth, lt_mara-zpudt, lt_mara-zADAT)
FROM mara
WHERE matnr = lt_mara-matnr.
Endloop.
Regards
KP -
How to use the Compounding Key in BPC10NW like BW info objects?
Hi experts.
We are longing the suitable solution in BPC-NW 10.0 to deal with compounding key like BW info objects.
We want to define the dimension with compounding key MATERIAL and PLANT, but BPC-NW 10.0 doesn't support it. Therefore we just defined the dimension "PLANT" as entity and "MATERIAL" as user-defined dimension with concatinated key "Material code-Plant code" as ID.
For instance:
-[Dimension PLANT] as type-E (entity)
ID
1000
2000
3000
-[Dimension MATERIAL] as type-U (user-defined)
ID ENTITY MATNR
1000-AAAA 1000 AAAA
1000-BBBB 1000 BBBB
2000-AAAA 2000 AAAA
2000-CCCC 2000 CCCC
3000-BBBB 3000 BBBB
3000-CCCC 3000 CCCC
(ENTITY and MATNR were defined as properties, and ENTITY filled the each member including dimension Plant)
Now we built a input form with following conditions:
-Page axis : ACCOUNT=Revenue, etc...
-Row axis : ENTITY=1000 or 2000, MATERIAL=all
-Column axis : TIME=Jan, Feb, Mar...
The result report came out as follows:
Revenue
PLANT MATERIAL Jan Feb Mar ...
1000 1000-AAAA 0 0 0 ...
1000 1000-BBBB 0 0 0 ...
1000 2000-AAAA 0 0 0 ...
1000 2000-CCCC 0 0 0 ...
1000 3000-BBBB 0 0 0 ...
1000 3000-CCCC 0 0 0 ...
2000 1000-AAAA 0 0 0 ...
2000 1000-BBBB 0 0 0 ...
2000 2000-AAAA 0 0 0 ...
2000 2000-CCCC 0 0 0 ...
2000 3000-BBBB 0 0 0 ...
2000 3000-CCCC 0 0 0 ...
But we expected to have a report restricted MATERIAL with their property on specified PLANT in member selector such as:
Revenue
PLANT MATERIAL Jan Feb Mar ...
1000 1000-AAAA 0 0 0 ...
1000 1000-BBBB 0 0 0 ...
2000 2000-AAAA 0 0 0 ...
2000 2000-CCCC 0 0 0 ...
How do we obtain the expected result? Please give us the good solution!
Best regards,
MasaHi Vadim.
GREAT! Our requirement is fulfilled by that way you described. Special thanks for your help!!!
Best regards,
Masa -
Error in char. Info Object
I have created the char . info object and in attributes gave the same char. and made it as navigational attribute. when i am trying to activate the info objecty i am getting the error
"Name of the Characteristic is Reserved".
Can nyone plz let me know how to resolve it.Hi,
Could you be a bit clearer? If you created a chrarcteristic infoobject and added the same in the attributes then its not possible and wrong.
An attribute must be a different infoobject.
For eg.
CHAR ATTr
MATID MATTYPE
You cannot have
MATID as the attribute of MATID.
Regards. -
Error in transporting info-object
Hello Experts,
We need to a import an info-object from Quality to Prod.
From Dev to Quality the transport was successful, but while transporting from
quality to prod we are getting the following errors:
Changes cannot be made, display user only
And as a result the info-object and hence the info-object,transfer rules/Transformation etc are
now inactive in the prod. enviornment.
Could anyone advice on what may be the source of this error??
Thanx and Regards
PriyankaHi Priyanka,
Pls check below threads, may be it will helpfull to you.
https://forums.sdn.sap.com/click.jspa?searchID=21045654&messageID=6758914
https://forums.sdn.sap.com/click.jspa?searchID=21045654&messageID=6720353
https://forums.sdn.sap.com/click.jspa?searchID=21045654&messageID=6407281
https://forums.sdn.sap.com/click.jspa?searchID=21045906&messageID=6758914
https://forums.sdn.sap.com/click.jspa?searchID=21045906&messageID=6407210
Thanks & Regards,
Ramnaresh .P.
Maybe you are looking for
-
Hi guys, Adobe Premiere CC 2014 user. I built a project, added markers and generally did my thing. When I came back from lunch, the following happens: 1. Premiere opens fine 2. When I select a file from my media library (just click on it once) I get
-
I cannot get sound on Facebook, SoundCloud and some other sites.
If I use another browser, this is not an issue but Firefox is my main browser. Please help!
-
Prevent to create billing document in a closed period
hello i want to know what is the best way to use transaction VF01 in SD for a billing date which is in an open period in Finance today i have many users which are creating billing documents for closed periods and this is stuck in VFX3 is there any wa
-
Iphoto 8 after update won't import RAW files
I'm running iphoto 8 version 7.1.3 and just updated the software from Apple's auto update (Jun 30th is when the update installed). Now I can't import RAW files from my canon 30D, from a memory card or from existing files. Every time I try iphoto free
-
Man, this is the crappiest upgrade Apple has ever put out. I've solved a lot of issues by rebuilding the library, fixing permissions, etc. Importing photos is still flakey, and I've had to rebuild the library many times just to get newly imported pho