Reg .ini Files and level based merics

Hi Experts,
1>What are the different .ini files that we have in 10G.
2>In how many ways we can create level based metrics.
3>If i want change default font as PDF in which ini file i have to change.
Regards,

Hi,
1>What are the different .ini files that we have in 10G.
NQClusterConfig.INI
NQSConfig.INI
DBFeatures.INI
2>In how many ways we can create level based metrics.
By using dimension hierarchy.
3>If i want change default font as PDF in which ini file i have to change.
NQSConfig.INI
mark if helpful/correct..
thanks,
prassu

Similar Messages

Import ini file and regfile

I want to import ini file and a reg file at runtime.
Now i know that you can do that with startup shim DLL.
I got sample project for the startup shim but I am not good in c++ programming.
Has somebody example code for import of ini file and reg file.
Please help me......I am stupid

stonehill1957,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Step incrementing of .ini file and check and changing the content within step

Hello I want to increment the [step002] automatically in the .ini file. If the steps are copied and pasted more times in already existing file, where by doing so the step numbers are doubled. For example if there exists [Step002] followed by content of it and then [Step001] and followed by contet of it and [Step002] followed by content of it. And if a person copies [Step002] with its content 80 times or n number of times then the last one should be automatically incremented to new number as [Step003] and [Step004] [Step005]. And then I want to arrange the content under each step. In my file I have a " Group_Start = Step001" and " Group_Name = OQ_004 set high port" as contents in each step. I want to arrange the group name.
What I want is, if in the newly copied [Step002] which would have already been incremented to [Step004], it would contain Group_Name = OQ_004 set high port which I have highlighted in italics, if this already exists some where in the file, then its corresponding Group_Start = Step001 which I have highlighted in italics should be given to the newly copied and incremented [Step004]. And in case the Group_Name = OQ_004 set high port which I have highlighted in italics does not match any where then its corresponding Group_Start will be as Group_Start = Step004. That means since the group name is new and it does not exist already in the file, the Group_Start should take its step number [Step004] which her I have highlighted in italics, as its Group_Start = Step004. Here with I attach my file and I also attach my steps which I had tried. It would be nice if solution is given or further step ideas from my steps to complete the task is given.
Thank you.
John
Attachments:
Config.ini ‏2 KB
Tried.vi ‏26 KB

Hello, Thank you for your reply. May be I break it into steps. Now where I am struck is that if there are say random numbers some repeated ones
example 001, 002, 002, 002, 004, 007, 006 etc.. I would like get sorted in ascending order and also the reapeated numbers should be in the running order. That means 001, 002, 003, 004, 005, 006 etc.. There should not be repeated numbers.if reapeatd then the repeated one should have to be incremented from the previous one. If this has been solved then I can explain the other part and shall aslo goahead. I had already tried one method but the loop seems to be not exactly matching. There are some numbers which come extra. You can use the same config file which I had sent earlier. Just copy and paste the steps below or inbetween and use it for testing. Thank you
Attachments:
change all stepst number.vi ‏14 KB

RSUM and level based measure

Hi all,
Is it possible to use the RSUM display function with level based measure. RSUM(LBM) in Answers.
I tried to do so but the RSUM is never correct,so i'm wondering if I'm doing something wrong or the RSUM is not working correctly with level based measures.
Regards

What is the month level key column functionality in your time dimension?
it should be in format of yyyymm but not in just mm ..

I tried to upload the Pxisys.ini file and MAX is showing the slot ID ...but i need a function to return those slot numbers..such that i can use in my DLL

hi hamilton,
thanks for your reply .
I already tried the option or pxisys.ini file
The MAX is showing the slot number ..but My requiremet is to use the slot ID in a DLL
so I need a function type of statemen to return or get the slot number of the NI devices on the PXI.
I think I clearly explained.
I would like to get the slot numbers through a software fucntion such that i can use the slot numbers values for some other purpose ,,like configuration ,,

jayamurugan,
This functionality currently is not built into National Instruments software. You can get the device number, but not the slot numbers programmatically.
Trey Hamilton
Applications Engineer
National Instruments
http://www.ni.com/support

Postgres_reg.ini file deleted after ininstalling enterpriseDB postgres

Mac OS X 10.7 (Lion) Server...After uninstalling the enterprisedb version of postgreSQL **after** the postgres installer failed, the postgres-reg.ini file was deleted. I now need a copy of the original /etc/postgres-reg.ini file. I would normally simply copy it from my original installation, however, this is no longer possible with the App Store Installer as I cannot simply reinstall the software. If someone could simply copy the contents of their /etc/postgres-reg.ini file and post it as an answer to this thread...I will make the necessary changes and place the file back in its proper place. Thanks in advance.

Was this ever resolved? I just updated to OSX Server 4.1 and it appears to write to this file every 10 seconds. My file is only 3GB in size, but it gets backed up every hour!
I deleted all the files in /Library/Server/Wiki/Logs from all Time Machine backups which freed up 160GB on my backup disk. Looks like I'll have to do this every so often.
Regards, Patrick

.bat file and .ini file

I have a batch file with the following contents, I need to substitute the paths \\folder\projectname\formatter\saxon8\ with a variable using .ini file. Could anyone please tell me how do I do this
@echo off
cls
echo.
set CP=\\folder\projectname\formatter\saxon8\saxon8-jdom.jar;\\folder\projectname\formatter\saxon8\saxon8-sql.jar;\\folder\projectname\formatter\saxon8\saxon8sa.jar;\\folder\projectname\formatter\saxon8\saxon-license.lic
...If the path of the needed files gets changed in future, the user need to change the path only in the .ini file and that should reflect in the .bat file.
Message was edited by:
Simmy
Message was edited by:
Simmy

I am reading the INI file in my code whose value C:\\temp\\ is getting displayed in my Batch file, but I need to display only the keyword Path in my Batch file. Can you please tell me what modifications I need to do in my code.
This is the contents of my INI file
[INI file : user.ini]
Path="C:\\temp\\"
The following is my code
    public void createFile()
        try
            p = new Properties();
            p.load(new FileInputStream("D:/user.ini"));
            JarPath=p.getProperty("Path");
            p.list(System.out);
        catch(Exception e)
            System.out.println(e);
        File file1=new File("D:/temp/ps1.bat");
        BufferedWriter bw1;
        try
            bw1=new BufferedWriter(new OutputStreamWriter(new FileOutputStream(file1)));
            bw1.write("@echo off\n");
            bw1.write("cls\n");
            bw1.write("echo.\n");
            bw1.write("set CP="+JarPath+"saxon8-jdom.jar;"+JarPath+"saxon8-sql.jar;"+JarPath+"saxon8sa.jar;"+JarPath+"saxon-license.lic\n");
            bw1.flush();
        catch(IOException ioe)
            System.out.println("Error creating \"ps1.bat\". Process terminated.");
Currently, the following is my Batch file contents
@echo off
cls
echo.
set CP=C:\temp\saxon8-jdom.jar;C:\temp\saxon8-sql.jar;C:\temp\saxon8sa.jar;C:\temp\saxon-license.lic
But I need my Batch file to display
@echo off
cls
echo.
set CP=Path\saxon8-jdom.jar;Path\saxon8-sql.jar;Path\saxon8sa.jar;Path\saxon-license.lic

"Search in Files" inside .ini files

I use the site search and search in file features in Dreamweaver quite often but I just discovered that if I have a folder full of .ini files and I need to search globally inside those files Dreamweaver returns no results.
Apparently, DW is unable to search inside files other than HTML, PHP, CSS, JS, etc. But it won't search in .ini files or any weird (for DW) file extensions.
I once was able to set up my DW to look inside PHTML files (Used by Magento) as well as applying code coloring to them as it would on PHP files.
I suspect this is a similar process but I wanted to make sure I was not seeing things. Is DW really that dense that will not search inside a file with an extension it doesn't know?
By the way, I did add .ini to the recognizable files in preferences, but obviously that's not enough to have DW search inside them.
OFF TOPIC COMMENT
Another weird thing I just noticed is that the "asset" and other modules will only work in WYSIWYG view. Meaning that if I save a color in my assets I cannot use it to insert it in a CSS file. Not even in code view. I have to be in the visual editor for it to work, but then it's useless to me.
Incidentally, some time ago I found that the visual editor in DW is actually very useful when working with dynamic websites like Drupal or wordpress. Especially when dealing with very large pages with lots of CSS files.
However, no one IO know would or should build their sites in the visual editor. It's simly a bad way to work. Why would adobe limit the use of the "assets" pane (and the "History pane too now that I remember) to the visual editor is beyond me in this day and age.
I do a lot of tasks where it would be greast to copy a procedure like a substiotution and have DW repeat the same procedure on other pages or similar code snippets. Yet, it won't alow me.
I love Dreamweaver and I am actually writing a book on how to use it with the likes of wordpress, drupal, etc. It cuts dowen development and design time by less than a third. If those things worked everywhere instead of just in the visual editor it would cut down even more on the time it ntakes to design dynamic website templates.
Sorry about the rant.
Thank you for any help.

Hi David, I too have worked closely on a lot of software projects and I am well aware of the limitations. In fact, that's one of the reasons I lioke to work on open source projects because of the vast talent pool they can utilize. Private companies, no matter how big, neet to triage new development according to their resources.
By the way, adding the .ini files to the extension.txt files in Dreamweaver is pretty easy. Since code coloring is not an issue that's really the only change I need to make. When I integrated the PHTML file extension for Magento I had to make a lot more changes (still manageable though).
One of your comments, about DW keeping its legacy features in a changing web development world, made me think that it may be time for Adobe to spawn a different IDE or start thinking about a more modular approach to the application.
I am writing a book on Dreamweaver integration for Open Source web scripts and when talking to other open source developers, one thing that comes up often is that Dreamweaver is a "bloated" program (this is not my complaint, by the way).
Part of the issue is that it needs to keep a lot of quasi-obsolete features so that long time users won't abandon the platform. Which featrures are obsolete is really up to each user. For me the WYSIWYG view is certainly not something I would use to design web sites, but should Adobe get rid of it, it would absolutely destroy my workflow since I use it to rapidly target HTML, CSS and even Core PHP code in the template and the file system of the scripts I work with.
The new "Live view" in CS4 was a welcome addition, especially since the basic page rendering in DW leaves a lot to be desired (Incidentally Microsnot "Expression" page rendering is a lot better, making the live view feature less exceptional except when troubleshooting JS based effects).
Anyway, that said, DW is an extensible program and there are a lot of thrid party utilities written for Dreamweaver. Couldn't the Adobe team use this extensibility to make improvements to the interface and even use it to add or subctract features from the main application?
I think they are mising an opportunity here to capture a wider audience. DW could ship with a minimal set of features and the team could choose to release their own add-ons so that users could build their own application.
I think that approach would silence a lot of critics, since the basic app would now be a lot slimmer, while still giving power and legacy users the features they need a-la-carte.
I am actually hioping that once my book comes out (if it ever does: the publishing world moves at a snail's pace) it may give the DW team a new perspective on how to use Dreamweaver in a modern web development enviroment, but honestly my biggest hope is for one of the current open source projects like Eclipse to look at my development system and maybe add some Dreamweaver-like features so that finally there would be a real open source alternative to Dreamweaver. In turn, I believe that will make DW move a bit more quickly in adding new features and shedding the obsolete ones.
Anyway, thank you again for the links, I did submit my suggestions. I am not holding my breath but we'll see.
Take care

Batch file, and installing a executable.

I'm pretty new to LabVIEW. Anyways, I need to create a makefile that will install the LabVIEW runtime engine, and several LabVIEW user created executable VIs into specific directories determined by environmental variables within the makefile. I've been looking around, and all I can find is batch file stuff. Any ideas would be appreciated. Thanks.
In short, I need LabVIEW RTE, and several labVIEW created executables installed on target machine via a makefile.
Sebastian

Todd has pointed you in the correct direction.
I tested this with an LV2009 installer that does not contain the LVRTE. I do not use make files (not a C coder) but think they may run applications like a batch file (if not, use a batch file).
1. Create the installer for your LV app and point the top level to install in single generic folder (c:\temp).
2. Include the other executables you mentioned as line items.
3. Run the installer locally to generate a installation spec file: 'setup.exe /generatespecfile myspec.ini'
    (The only question I noted was about the install folder which I set to #INSTALL_FOLDER#)
4. Open the generated 'myspec.ini' file and find the 'set install directories' area and you should find:
        <RootDirectory1>=#INSTALL_FOLDER#.
5. For my confirmation test, I changed this to 'c:\testInstall'.
6. Run the installer using the updated spec file (add the later parts for auto install; for silent, use just /q):
         'setup.exe myspec.ini /qb /acceptlicenses yes'
From your makefile (or batch file), you should be able to update the #INSTALL_FOLDER# string in the intermediate spec file (myspec.ini) to the contents of the environment variable you want by simple string replacement then run the installer as shown in (6).
good luck

Bug : LVRT ini file pollution/corruption... (leaves me speechless)

Hello,
I programming a platform independend autonomous datalogger in C based on 6009 and Nidaqmxbase but i see something strange in Windows platform about ini file
I see the lib hook al I/O access to overlappe file read/write and adding some keys especially in INI file with the exact same name of executable
For exemple you got [LVRT] at the top of the ini file, and this not be properly handle, this corrupt INI files lines
I lot my voice when i discover it ! leaves me speechless !
What did you do NI dev team ? did you think about performance & ressources & simplicity ? hum...
You can reproduce with the joined sample with MINGW and make.bat
Hop something respond me a day
rom1nux
Attachments:
acquirelvrt.c ‏5 KB
make.bat.txt ‏2 KB

rom1nux wrote:
Hello Ben,
The type of change you are requesting to avoid the issue you are seeing would take years to implement
Hum...you get right, but in "C world" this kind of things is a complet "non-sens"...
if we use C, this is because we want to know exactlly what we do !
Getting accross a lib wich can produce this kinds of non-documented manipulations is not very safe in my world...
immediatly we get doubt "...what other surprising things this library can reserved...", "...does it coded with feet..."
And more scarry, why this strange not-documented backgrounded operations dont work properlly ? (ie: corrupt acces to file with simple fprintf() )
Look what kind of code NI devs need to "hook the I/O systems-calls" and your begin to think about performance and ressources losts, and begin to be really scarry...
Other thing, basic, why something "normally disabled" (ie: LABView) want to write to a config file ? and what he use my own system call ?
Hum..yes...this takes years to re-implement
So the best i can do is suggest you treat the name as "reserved" to NI and work around it.
Yes, this is what we do, but for our case this is quiet the "straw that broke the camel", too much problem/limitation/workaround on linux version...seem identical on Windows...
I have to check if Nidaqmxbase3.4.5 got improvements...My boss goes to decide in few day...he currently look if mcc is according real C philosophies...
Thanks a lot for your Help and your suggestions
Rom1nux
With great power comes great complexity. I'm still learning everything that has bee dumped on my brain.
Pssst don't tell anyone but....
mcc is now owned by NI.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Firefox profile cannot be loaded. It may be missing or inaccessible - yet no profile.ini file is missing (folder empty), clean reinstall has not not worked

I'm running windows 8 and had recently handed my computer back to be repaired. When I got my computer back I started getting the error that states that "Your Firefox profile cannot be loaded. It may be missing or inaccessible." upon opening.
I've had this before and just renamed the profile.ini file as something different forcing Firefox to create a new profile. However the profile.ini file is not there, at all.
Everything that I've searched for shows profile management through firefox, but I can't open firefox to create any profiles so they don't help at all.
Does anyone know

This is usually caused by a problem with the profiles.ini file and the profile marked as Default=1 is no longer present on the hard drive.
*Windows: "%AppData%\Mozilla\Firefox\"
*Linux: ~/.mozilla/firefox/
*Mac: ~/Library/Application Support/Firefox/
*Delete the profiles.ini file to force Firefox to create a new default profile
*Use the Profile Manager to create a new profile
*Use "Choose Folder" to recover an existing profile if there is still one present
*http://kb.mozillazine.org/Profile_Manager
*https://support.mozilla.org/kb/Managing+profiles
*http://kb.mozillazine.org/Profile_folder_-_Firefox
The "AppData" folder in Windows Vista and later Window 7+ versions and the "Application Data" folder in XP/Win2K are hidden folders.
*http://kb.mozillazine.org/Show_hidden_files_and_folders
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

How to write Data from INI file to Ring control

Hai,
I need to write the Data read from INI file to a RING control.While doing this operation using Variants i am getting error.
I will be pleased if somebody help me.I have attached the Particular INI file and the VI.
Solved!
Go to Solution.
Attachments:
Read Serial IO INI data.vi ‏34 KB
Serial IO paramters.ini ‏1 KB
Serial Engine Initialize.ctl ‏6 KB

Adding data to ring
Kudos are always welcome if you got solution to some extent.
I need my difficulties because they are necessary to enjoy my success.
--Ranjeet
Attachments:
Adding data to ring.vi ‏10 KB

Query regarding Level Based Measure on Reports

Hi All,
I am facing an issue in OBIEE while using aggregate measures.
Scenario
My Report has the following columns. There is security applied on the report ie an Employee who logs in gets to see only his/her data.
1) Employee
2) Month
3) Monthly Sales
4) Org Sales(Aggregate Sales at Organization Level)
My Issue is that even when an Employee does not have any Monthly Sales for a Month (no entry for the employee in the dimension table) it displays results for Org Sales. So I have a report that looks like given below.
Please note - There is no entry for this employee in the Dimension table for this month.
Employee
Month
Monthly Sales
Org Sales
12000
I do not want the report to display any value when there is no monthly Sales for the Employee. From the back end, I can see that there are 2 separate queries generated for this report. 1 for the fetching the Monthly Sales for the Employee and 1 for fetching the Org Sales. If I apply a condition saying Employee IS NOT NULL, it gets applied on the first query.
Is there some workaround to make sure that the report does not come up or show some message when Employee data is not returned by the first query
Thanks
X

hi Devarasu,
Thanks mate.
I know how level based measure works.
But in my case The Hierarchy is bit different The UDA is part of Product hierarchy but its not the Child of Subdivision,
I think problem is occurring because of that only but i am not sure
anyone have any idea about this kind of hierarchy and level based measures?
Thanks

Translat.ini File

We are upgrading RP11.3 to RP11.5. We have a number of custom rules that have been merged into 11.5 batch system. The issue we are having is that after we merged our custom error messages for our custom rules into the translate.ini file, the system is not recognizing our entries. It seems that the 11.5 system is pulling these error messages from another file.
How can we get the system to recognize our custom errors messages in translate.ini that we have created and used in past version of Documaker.

Under 11.5, Documaker uses Oracle's globalization standards for messaging. The translat.ini file isn't strictly used at runtime, rather, a compiled binary version that is language-specific is used instead. To generate the compiled binary version, there are some steps to be followed.
The first thing you will need is the LMSGEN utility from Oracle's NLSRTL package. Currently this is distributed with Oracle database SDKs. I don't have any more specific information than that right now. Here is a bit more info on this utility http://download.oracle.com/docs/cd/B19306_01/server.102/b14225/ch10oci.htm#i1007610
Once you have LMSGEN installed and ready, you need to convert your translat.ini into an intermediary MSG and MMP files. You can create a script that will translate your translat.ini file and create these files for you. It's a relatively simple process:
Translat.ini lines:
1000 = &E&: Error: Requested library <&LIB&> not available or cannot be loaded.
1001 = &E&: Error: Use of rule or function <&NAME&> requires a printer classification of <&CLASS&>.
Translat.msg:
#CHARACTER_SET_NAME=AMERICAN_AMERICA.US7ASCII
1000, 42, "%1: Error: Requested library <%2> not available or cannot be loaded."
1001, 42, "%1: Error: Use of rule or function <%2> requires a printer classification of <%3>."
Translat.mmp:
1000:E,LIB,
1001:E,NAME,CLASS,
The MMP file is a token/parameter mapping file, since the old translat.ini uses tokens, and Oracle's globalization framework uses parameters. Note the top line in the translat.msg file -- this is required!
The format of the INI file:
msgNumber = &TOKEN&: Message with &TOKEN&
The format of the MSG file:
msgNumber, msgType [42=Error,0=Info], "Message with %1 parms"
Format of the MMP file:
msgNumber:TOKEN1,TOKENn,...,
Once you have the MSG file, then use the LMSGEN utility from Oracle's NLSRTL package to converts that into an MSB file. The MSB file is a compiled binary version of the message file, and this is what is used to generate the actual messages. There will be a different MSG file for each language your system should support. In addition, the MSB files are platform dependent and must be compiled on the platform where they are intended to be used.
One thing to keep in mind when running it is that Oracle's messaging libraries are built around the notion of each product having its own separate directory under the Oracle home directory (identified by the ORACLE_HOME environment variable). Each product may in turn have its own separate component or "facility" with its own set of message files. Oracle manages this by having a separate directory under ORACLE_HOME for each product, and then a "mesg" directory under that where the message files for every component are placed. When you run the lmsgen utility, it already expects there to be an Oracle base directory and an ORACLE_HOME environment variable that points to it. In addition it expects there to be a sub-directory for the product under the Oracle directory, and a "mesg" subdirectory under the product directory. When you run the lmsgen routine, it expects you to give it the name of the msg file, the name of the product, and the name of the facility. It uses the product name to locate the "mesg" subdirectory, and it uses the "facility" name as the base name of the msb file that it generates (the filename is suffixed by the language). So, to run lmsgen you will need to have a directory which has some directory underneath with a "mesg" directory under it. So for example (assuming you don't have Oracle code already installed somewhere) you could do the following:
mkdir C:\Documaker\mesg
set ORACLE_HOME=C:\
lmsgen translat.msg Documaker xlt
and lmsgen would write a file name "xltus.msb" to the "C:\Documaker\mesg" directory. (The msg file has a code in the first line identifying the language that it is written in, which is how it knows to name it with a suffix of "us". Documaker currently doesn't use the "ORACLE_HOME" method of locating the file, but as far as I know, you do need to have an ORACLE_HOME defined to run lmsgen.exe.
Since we don't use the ORACLE_HOME method, you would need to provide command-line options to override input and output paths.
lmsgen translat.msg Documaker xlt us -i .\ -o .\
The -i identifies the input directory to location the MSG file. The -o indicates the output directory to use as a destination for the compiled MSB file.
Finally, move the MSB and MMP file to the \dll\lang folder inside your Documaker installation.

Write ini file not readable

Hi all,
I store configuration data in an ini file and give this file a custom extension.
If users open this file in a text editor I don't want it to be readable. Without encrypting the text how can I do this?
I cant seem to get the binary VIs to work. Maybe somebody could show me?
Cheers,
Battler.

You haven't really defined how secure you want your data, but if you just want a simple way to hide the information from a casual user, this may work.
Obviously, if someone really wanted to, they could figure this out.
steve
Help the forum when you get help. Click the "Solution?" icon on the reply that answers your
question. Give "Kudos" to replies that help.
Attachments:
write scrambled file.vi ‏14 KB
read scrambled file.vi ‏13 KB

Reg .ini Files and level based merics

Similar Messages

Maybe you are looking for