Reg inspection lot cancellation

Dear all,
When I am cancelling material document of GR (101) for a purchase order with account assignment-P
(projects) and item category-S (third party) with insp type-01 , inspection lot is not getting cancelled.
Where shall I make setting to cancel the lot.

HI,
GO to QA12 transaction code enter inspection lot -
>Usage Decision----
>Function -
>Cancel lot

Similar Messages

QM - Inspection Lot cancelation.

Dear Master ,
Production confirmation GR into Warehouse , after QM release the UD and stock move into Unrestricted stock.
I found that production Cost are not accurate because wrong activity time enter , so i would like to cancel the production order and reverse all the step include GR and reverse the UU stock into QI.
Can anyone tell me how can i cancel the inspection lot ?

Hi Check this below note & as i said earlier, goto OMJJ t code configure 322 movemnt type with SAP note program 175842 & create Z-Tocode. Now run the Z- Tcode with the Inspection lot u want to reverse, After execution, u can see message document reversed or posted.
Check the below note:
[https://websmp102.sap-ag.de/notes]
Edited by: Lokesh K on Jan 6, 2011 12:04 PM

Source Inspection lot cancellation

Hi,
I wanted to know, whether existing source inspection lot (with status Qualification Model) can be cancelled (LTCA) by carrying out reversal of the GRN (movement type 102) ?
Background : Material is having both inspection type (01 and 0101) active in materail master. Q-info record exists with profile 0001 (Supplier Relationship).
Thanks

Source Inspection lot is created after PO is released.So canceling original GRN will not cancel the source Inspection lot...
Can you explain what is exact requirement ??

Inspection lot cancellation

Hi
I want to cancel I lot whose UD has been made. I am getting message not possible. Please give me some inputs
Shrish

Shrish,
You need to use transaction QA12. In the intial screen enter the Inspection lot number and enter. From menu bar "Usage Decision" ->Functions->Cancel Lot and then save the lot.
Kindly close this thread after rewarding points,
Regards,
Prasobh

Inspection lot cancel after UD made.

Hello all,
For one MIGO Inspection lot is created and material was accepted. now it is in FI module for payments. But FI people found that it was wrong Vendor. MIGOwas done for a wrong Vendor. So now i want to reverse the Inspection Lot. Please provide me a solution.
With Regards,
R.Mahendiran.

You can no longer reverse goods movements that were created from the
transactions of the usage decision.
This function is not currently provided in the standard system.
If you want to reverse the Usage decision & stock posting ? , Apply SAP Note- 175842.
SAP Note 175842 - Inspection lot: Reversal of goods
movements from UD
R Karthikeyan

Reg: inspection lot in MIGO

Dear all ,
can anyone have idea,
I have done GR against PO , My inspection lot has been created , But there is no stock Posted in the recieving plant.
so can anybody help me in resolving this issue

Dear Sunil,
Now you have to Tcode-QA32
In that input the following
Lot created on-Input the date on which inspection lot was created
In the field "Insp.lot origin"- select- 01
Under List Setting header
click the Radio Button on -Select only inspection lots without a usage decision
Now press F8 or execute
In the subsequent screen You will get the inspection lots created for that day,select the respective inspection lot & do result recording & usage decision,consult your QM consultant for more details on the same
While doing usage decision if you accept the goods then it will be moved from quality stock to unrestricted stock
After that you can check in MD04/MMBE -you can find the stock under unrestricted/blocked(based on the decision you gave in QA32)
Hope this is useful
Revert back if you have any further queries
Reward points if useful
Regards,
SVP
Edited by: SVP on Dec 17, 2007 12:54 PM

04 Inspection Lot Cancellation

Dear QM Followers.
I am not able to cancel the 04 LOT generated by production order.There are two scenarios.
Scenario I
=========
Prod Order created and confirmation done.Stock received by MB31.Subsequently IL generated and UD given in QA32 by mistake.
To reverse this I am doing reversal Mvt in MB31 by using 102 mvt and picking the stock from UI stock.Finally I cancel the confirmation in CO13.
Scenario II
=========
Prod Order created and confirmation done.Stock received by MB31 and IL also generated.Now I do not want to do UD.
When I try to reverse by using 102 Mvt in MB31 the system gives error that stock change is not possible in QM.
How to resolve this issue.
Please help on this.
Yogesh Walde
MM Consultant

If the UD was already done, then you can't reverse the UD in the std way.
Here are some options:
First you may want to reverse the UD status by using user exit QEVA0008 and then look for oss note : 175842.
If the stock needs to be released from unres to quality try MBST to cancel the document if it is not invoiced.
Try 321,322 mov types by activating 08 ins type in qm view of MM for stock transfer
I hope any one of the option would work for both of your scenarios.
Mahee

Reg inspection lot in Multiple specs

Dear all,
I am trying out Multiple specs scenario. and I have done all the steps while I got a insp lot generated it is in CRTD stage,I want to know although created insp plan why I got the lot in CRTD and how to proceed the lot processing, For IP spec is 10-20 and for BP it is 21-30, insp plan created first then I have done a process order
please give me step by step
Thanks in advance
Regards
Madhav

Dear Gajesh,
Thanks for the response, Yes I am doing Multiple Specifications, although I created insp plan prior to the cycle, insp plan is not getting assigned to insp lot,is it a prerequisite that compulsorily we need to activate check box of material specification in QM view.
please advice step by step
Thanks in advance
Regards
Madhav

Cancel inspection lot when results already recorded

Hi,
I have an inspection lot created via the release of a process order, since the lot has been created the process order has been canceled and now there is a requirement to cancel the associated inspection lot also. However there are results recorded and confirmed against the inspection lot and the option in QA02 Functions ->Inspection lot -> cancel is no longer available? Any suggestions on how to cancel this inspection lot would be greatly appreciated.
Regards,
Gary

Dear,
You need to use transaction QA12. In the intial screen enter the Inspection lot number and enter. From menu bar "Usage Decision" ->Functions->Cancel Lot and then save the lot.
Please refer this link,
[ Cancel Inspection Lot |Re: cancel QM inspection lot]
Regards,
R.Brahmankar

MM - Inspection lot

Hi Gurus,
Did a MIGO. Goods Receipt by Inbound Delivery (180008338) and Return to Vendor 122. This created the Outbound Delivery (80010031). I managed to pick using VL06O (For Picking) then VL06O (For Confirmation) but when we came to the VL02N (Post Goods Issue) we receive following message:
HU items refer to an inspection lot. (HUGENERAL 320)
Regards
Raja

Hi Raja
This is due to Inspection lot cancelled.
please check below OSS notes, may be useful..
569562 - Error E320(HUGENERAL) during goods movement
982784 - Error message HUGENERAL 320 if inspection lot cancelled
regards
Srinivas

Scenarios for "manual creation of inspection lot"

Hi QM gurus!!
I would just like to ask the main function of QA01 or "<b>Manual creation of inspection lot</b>"
What are the cases/scenarios where this tcode is used? I would really appreciate if you could help me.. Thank you.
Regards,
Heinrick Palad

HI,
The table below provides a brief overview of the functions you can use to process inspection lots. Appropriate cross references are included for the more extensive tasks or for those for which additional information is available.
Prerequisites
The inspection lot processing functions can be linked to various authorizations that are checked by the system whenever you try to process an inspection lot. The following types authorizations are relevant to inspection lot processing:
Material authorizations
The material authorization for QM is stored in the material master. For more information, see Creating and Changing QM-Specific Data for a Material.
Inspection type authorizations
This authorization controls which inspection type the user can access in order to create an inspection lot. The inspection type authorization is plant-specific.
No authorization checks are executed in QM when an inspection lot is created automatically.
Features
Function
Pushbutton / Menu path
What you should know
Accessing the initial screen for the inspection lot processing functions
Logistics ® Quality management ® Quality inspection ® Inspection lot processing ® Inspection lot
Creating an inspection lot manually
See Creating an Inspection Lot Manually
Changing an inspection lot
Choose Change
Enter the number of the inspection lot you want to change and then choose Enter.
Displaying an inspection lot
Choose Display
Enter the number of the inspection lot you want to display and then choose Enter.
Creating a new batch in an inspection lot
See Batch Creation in Inspection Lots
Cancelling an inspection lot
Call up an inspection lot in the change mode and choose Inspection lot ® Functions ® Cancel lot.
See Cancellation of an Inspection Lot
Blocking/unblocking an inspection lot
Call up an inspection lot in the change mode and choose Inspection lot ® Functions ® Block lot.
To unblock an inspection lot, choose Inspection lot ® Functions ® Unblock lot.
When you block an inspection lot, you cannot process the lot further. You must unblock the lot if you want to perform any additional operations.
Transferring stock in an inspection lot
See Stock Transfers
Making corrections to inspection lot quantities
See Corrections to Inspection Lot Quantities
Creating a QM order
Call up an inspection lot in the create or change mode and choose Goto ® Insp. lot acc. assgnmt.
See QM Order Creation
Resetting the sample calculation
See Resetting the Sample Calculation
Printing inspection instruction/sample-drawing instruction
See Printout of Instructions
Approving a task list
Call up an inspection lot in the create or change mode and choose Inspection lot ® Functions ® Give approval
If the task lists in your company must be approved before they can be used, you should make sure that only approved task lists are assigned to an inspection lot. If the system selects a task list that has not yet been approved, you can use this function to approve the task list (provided you have the necessary material authorization).
this link help u.
http://help.sap.com/saphelp_erp2004/helpdata/EN/be/00bbe7ca5311d2961800a0c930e04c/frameset.htm
reward is usefull.
tahnks.

Inspection lot of cancelled process orders

Hi Gurus,
I would like to ask if there is an easier way of knowing if the order of an inspection lot was cancelled. Right now the business is on early lot creation, meaning once the order is created an inspection lot is also created. The problem is when the order is cancelled there is no way of knowing it through QA32 unless you go to the order itself.
Is there an easier way of knowing what orders are cancelled (TECO without confirmation)?
Thank you for your help!
Eva

Hi,
But they don't really cancel process orders. They use TECO.
Thank you.

Cancellation of inspection lot

Hi PP & QM gurus,
I want to cancell the stock posting after GR from production. and stock posting is done by QM. I have activated inspection type 04 in M Master. and then after production confirmation system creates an inspection lot and i have done stock posting after UD.But later i came to know that i have created an excess GR, nd wanted to reverse it. But i cant to do the same.
Pls guide me on this issue.
Thanks in advance
ACP

Hi,
U can not reverse the UD .One thing that you can do is that u can post back the material from unrestricted to Quality inspection . For this u have to activate the inspection type 08 .
And use movement type 322 to post the materila back to quality
Amol

Inspection lot 04 cancellation

Hello QM gurus !
In the material master data of my produced material, I have entered an inspection type 04.
When I have done my GR on process order, inspection lot 04 has been created (status REL).
Now I want to cancel this inspection lot and I don't want the inspection results to be transfer to the batch MM.
Do you know a way to cancel inspection lot 04 ?
many thanks
Amaury
Comments: function cancel lot is grey in QA02

Since you haven't made a UD yet, you can delete out all your resutls.
Then use MBST to cancel the material document associated with the GR from the order.
This should work.
Craig

Cancellation of UD of inprocess inspection lot

Hi all,
Can I not do cancellation of inprocess inspection lot ?....
partha...

Hello,
If you just want to cancel the insp lot then
GOTO QA12, enter your insp lot no.
Select usage decision at left top -> Functions-> Cancel lot. But in this case, if insp lot has been processed & stock have moved to unrest. then it will not show in insp stock after this process.
If you want to transfer stock from unrest. to insp. stock then you have to cancel GRN no.
GOTO MB01 enter PO no. & Mov type & select the option unrest. in stock type.
Try it & confirm back.
Thanks & Regards,
Anisha

Reg inspection lot cancellation

Similar Messages

Maybe you are looking for