Reg : Internal error

Hi ,
I am getting exception while clicking action from portal
"Exception condition "INTERNAL_ERROR" raised., error key: RFC_ERROR_SYSTEM_FAILURE: com.sap.aii.proxy.framework.core.BaseProxyException."
Function module and JCo' s are working properly.
Plz give me reply,It's urgent.
Thanks
Risha

Hi Risha..
Check out for the back-end plugin "WP-PI 6.0(WP-PI 600_46C)". You can find that in the R/3 transaction SPAM.
For further details.. check out the thread
/thread/111008 [original link is broken]
Regards,
Sayan Ghosh

Similar Messages

Reg.Internal error msg no. 8J607

Dear Experts
In AFS without grid assigned for a material, We are doing goods movement in MB1B with 311 E mvt type, if I enter the purchase order number and press enter the system show the " internal error msg no 8J607" how to solve that problem. Pls help me.
Thanks in advance
Rajakumar.K
Hi,
Please refer note 1088456. Why are you giving PO number instead of sales order number?
Symptom
For sales order stock fixed/reserved by ARUN, if you try moving the
complete allocated quantity from one storage location to another within
the same plant (mvt 311E) using the 'Allocated stock' feature, it results in error.This error occurs independent of the AFS release
Other terms
Allocated Stock, Sales order Stock, 311E,8j607
Solution
Kindly implement the following code correction
We are not using allocation run. Please help me. How to solve this problem.
Thanks in advance
Rajakumar.K

Hi,
Please refer note 1088456. Why are you giving PO number instead of sales order number?
Symptom
For sales order stock fixed/reserved by ARUN, if you try moving the
complete allocated quantity from one storage location to another within
the same plant (mvt 311E) using the 'Allocated stock' feature, it results in error.This error occurs independent of the AFS release
Other terms
Allocated Stock, Sales order Stock, 311E,8j607
Solution
Kindly implement the following code correction

Error while approving time sheet "Internal Error Occurred"

1) Time Sheet entry done for an employee b/w 3rd-5th Oct 2011, while approving it through T code - CATS_APPR_LITE, its giving the error " INTERNAL ERROR OCCURRED" !!!
When the error is expanded, the below details have come up.
Internal error occurred
Message no. LR030
Diagnosis
The system has detected an internal program error which should not have occurred in a normal program run.
Procedure
To safeguard your data, notify the SAP hotline.
2) Please let us know, is there any other procedure or way to approve the time sheets ???
Reg,
Hrishi - 9945607822

Note 1315885 - CATS: Internal Error(LR030), in transaction CATS_APPR_LITE
Refer and apply the mentioned note if applicable.
Regards
Sreenivas

Internal error occured

I've just tried updating my Adobe Reader to the latest version but when I try to run the program I get the following error:
"An internal error occured"
I've tried uninstalling using Adobe's Cleaner Tool from http://labs.adobe.com/downloads/acrobatcleaner.html and also tried downloading and installing again from http://get.adobe.com/reader/enterprise/. I've also tried opening the program byu itself and not via a .pdf and I still get the error.
I even ran a registry script to disable Protected Mode. Still get the error.
Win 7 x64.
Please help!

Sorry, I haven't noticed your original post from March 1.
What is your installed Reader version: 11.0.6?
I'd like to make sure you ran the correct registry script for Reader XI, which I usually post under the name 'protected11.reg' (there is a different script for Reader X called 'protected10.reg').

"An internal error occured" when trying to launch off the network.

Hi Gents,
We are running Abobe reader 9 on a RM CC3 Network and found that when a station or laptop is not on the network you get a error when tryin to launch adobe reader. "An internal error occured" then another error box with reference to memory not being read.
When runing reg mon I notice a process just as the application starts and says "set Value" then sets a registry value in
HKCU/Software/Microsoft/windows/Current version/Explorer/Shell Folder/appdata (N:\Mysettings\AppData)
I would like to application to as default set the app data folder to the local drive and always look here instead of looking on the network drive. This is causing problems when poeple are taking laptops home.
Any ideas would be much appreciated
Cheers Mike

EPM Admin
Try restarting the workflow. If that doesn't work, then you need to provide a whole lot of details on how the workflow is built, what version you are running, was it working before etc.
CHeers!
Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries

Fatal Internal Error : "ThEvent.cpp", line 209

Hi,
Any help with the following AddRef()/Release() issue would be most appreciated:
I'm a software developer working on a COM (ActiveX) object for use by e.g. C# (test ok) and LabVIEW clients. The object supports events; however, when events are accessed with the "Register Event Callback" block, LabVIEW does not free the object when the VI is finished, and upon subsequently closing LabVIEW, I receive the following dialog:
Fatal Internal Error : "ThEvent.cpp", line 209
LabVIEW version 8.6
You will lose any unsaved work. For assistance in resolving this problem, please relaunch LabVIEW, or contact National Instruments.
and log:
#Date: Fri, Nov 14, 2008 12:44:58 PM
#OSName: Windows NT
#OSVers: 5.1
#AppName: LabVIEW
#Version: 8.6
#AppKind: FDS
#AppModDate: 06/26/2008 05:25 GMT
source\mgcore\ThEvent.cpp(209) : DAbort:
$Id: //labview/branches/Saturn/dev/source/mgcore/ThEvent.cpp#6 $
0x00B129F6 - LabVIEW <unknown> + 0
0x0040F5C0 - LabVIEW <unknown> + 0
0x7719C351 - OLEAUT32 <unknown> + 0
0x7712DB25 - OLEAUT32 <unknown> + 0
0x77EF658C - RPCRT4 <unknown> + 0
0x77EF4BF3 - RPCRT4 <unknown> + 0
0x7717E724 - OLEAUT32 <unknown> + 0
0x77600C31 - ole32 <unknown> + 0
0x77600BDB - ole32 <unknown> + 0
0x7750F237 - ole32 <unknown> + 0
0x7750F15C - ole32 <unknown> + 0
0x7750FC79 - ole32 <unknown> + 0
0x77600E3B - ole32 <unknown> + 0
0x776009BC - ole32 <unknown> + 0
0x77600DF2 - ole32 <unknown> + 0
0x7750FCB3 - ole32 <unknown> + 0
0x7750FAE9 - ole32 <unknown> + 0
0x7E418734 - USER32 <unknown> + 0
0x7E418816 - USER32 <unknown> + 0
0x7E4189CD - USER32 <unknown> + 0
0x7E4196C7 - USER32 <unknown> + 0
0x0041E852 - LabVIEW <unknown> + 0
0x0042AB32 - LabVIEW <unknown> + 0
0x00A27592 - LabVIEW <unknown> + 0
0x00A2DC60 - LabVIEW <unknown> + 0
0x00E3A5B9 - LabVIEW <unknown> + 0
0x008F0FF6 - LabVIEW <unknown> + 0
0x008F0CDA - LabVIEW <unknown> + 0
0x008F0EFB - LabVIEW <unknown> + 0
0x008F0F40 - LabVIEW <unknown> + 0
0x015AB20D - LabVIEW <unknown> + 0
0x7C816FD7 - kernel32 <unknown> + 0
0x00000000 - LabVIEW <unknown> + 0

I've attached a minimal COM server (that starts a thread when events are requested) that shows the issue. Steps to reproduce with LabVIEW 8.6 on Windows XP for x86 follow(stuff in parenthesis are comments):
(1) unzip HelloClass.zip to C:\ (4 files: hello.vi, callback.vi, HelloClass.dll, Hello.tlb)
(2) C:\>regsvr32 helloclass.dll (should get "DLLRegisterServer in helloclass.dll suceeded." dialog)
(3) C:\>hello.vi (start LabVIEW)
(4) Ctrl+R (run the VI. You should see "Command: test" in the String Indicator. At this point the last call into the server is AddRef() but should be Release())
(5) Alt+F4 (close the VI)
(6) Alt+F4 (close LabVIEW)
You may need to perform steps 3-6 up to ~10 times, because at this point one of 3 behaviors randomly occurs:
(A) Fatal Internal Error : "ThEvent.cpp", line 209
(B) Release() is finally called the same # of times as AddRef(), causing the destructor ~HelloClass to run (which kills the thread). This should instead happen after step 4 (which it does if you remove the "Reg Event Callback" block)
(C) Release() is called several times, but not enough to decrement the reference count to 0
Behavior A doesn't occur if the server doesn't start the thread. In source.zip, I've also attached the server's source code for your R&D team along with dbgMon, which is useful for looking at the _RPTF debug output. Thanks much for your patience and for looking at this.
Attachments:
HelloClass.zip ‏84 KB
source.zip ‏173 KB

Random "Internal Error Occured" When Opening PDFs

I have a user that since yesterday morning has been having random "An internal error has occured" errors and Adobe Reader X crashes out. He tells me that it doesn't happen on every PDF he tries to open and on the ones that it does happen if he keeps trying to open the file it will eventually work. Though when it does it might not display properly or it will cause Reader to freeze. In his words, "It's not always the same result with each file."
I've been reading around at all the 'internal error' threads (seems fairly common!) and it seems that it could be something nice and simple from a permissions error, which I can't see it being this because then it wouldn't work at all surely? And then there is complete hit or miss fixes like reinstalling or a reg fix!
Can anyone provide anymore useful information!?

Hi chen,
I have executed the function modules.Its throwing the floowing exceptions.
SPBT_INITIALIZE is throwing the exception INVALID_GROUP_NAME Message number BT - 831.
Function modules SPBT_GET_CURR_RESOURCE_INFO , SPBT_FIND_FREE_SERVER, SPBT_GET_CURR_RESOURCE_INFO are throwing the exception PBT_ENV_NOT_INITIALIZED_YET message number BT - 838 .
How to resolve this problem.
Thanks in advance.

Error while creating SC: Internal Error - termination type TH_RES_FREE

Hi I encountered this error while creating a SC. All attributes for this user are maintained and the "check user" transaction does not give any error.
Amol Mate
Error when processing your request
What has happened?
The URL http://punhjwsapsrm:8000/sap/bc/gui/sap/its/bbpsc02/! was not called due to an error.
Note
The following error text was processed in the system SSS : Internal Error
The error occurred on the application server PUNHJWSAPSRM_SSS_00 and in the work process 1 .
The termination type was: TH_RES_FREE
The ABAP call stack was:
Function: B40B_READ_TABLE of program SAPLBBP_BD_DRIVER_40B
Function: META_READ_TABLE of program SAPLBBP_BD_META_BAPIS
Form: LOCATIONS_READ of program SAPLBBP_ATTR_F4
Function: BBP_ATTR_F4_SLOC_PPOMA of program SAPLBBP_ATTR_F4
Form: STG_LOC_GET_FOR_LOCATION of program SAPLBBP_SC_APP
Form: STG_LOC_GET of program SAPLBBP_SC_APP
Form: LOCATION_STG_LOC_GET of program SAPLBBP_SC_APP
Form: USER_ATTRIBUTES_GET of program SAPLBBP_SC_APP
Form: SC_INIT of program SAPLBBP_SC_APP
Function: BBP_SC_APP_EVENT_DISPATCHER of program SAPLBBP_SC_APP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system SSS in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server PUNHJWSAPSRM_SSS_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 1 in transaction ST11 on the application server PUNHJWSAPSRM_SSS_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http-c:100-u:PTEST -l:E-s:SSS-i:PUNHJWSAPSRM_SSS_00 -w:1-d:20051121-t:171904-v: TH_RES_FREE-e:Internal Error
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team

Hi Amol,
First of all the sicf transaction is to be used only if you use the internal ITS.
Now you have to put an external breakpoint in the source code of the ABAP Program or FM you want to debug , one of these in your case :
Function: B40B_READ_TABLE of program SAPLBBP_BD_DRIVER_40B
Function: META_READ_TABLE of program SAPLBBP_BD_META_BAPIS
Form: LOCATIONS_READ of program SAPLBBP_ATTR_F4
Function: BBP_ATTR_F4_SLOC_PPOMA of program SAPLBBP_ATTR_F4
Form: STG_LOC_GET_FOR_LOCATION of program SAPLBBP_SC_APP
Form: STG_LOC_GET of program SAPLBBP_SC_APP
Form: LOCATION_STG_LOC_GET of program SAPLBBP_SC_APP
Form: USER_ATTRIBUTES_GET of program SAPLBBP_SC_APP
Then launch the transaction in IE, once the program reaches a breakpoint, you'll get the ABAP debuger in IE.
Regards.
PS: if it doesn't work, put the parameter ~generatedynpro in BBPGLOBAL service to have it applied to all BBP transactions
Vadim

Internal error occurs in background job scheduling

Hi Experts,
We are facing an error message "Internal error occurs in background job scheduling" while trying to execute a custom report(Z report) in background in SA38.
Please find the following observation on our side on this message.
1) This message is not coming for only one report not for others.
2) SU53 screen shot shows that SE38 check is failed, but the weird thing is not happening for other report.
3) Persons having SE38 auhtorization are able to run this report.
Please advise.
Thanks in advance,
Viven

What is the message ID and number? Have you tried OSS search and debugging?
What does this program do, in a nutshell?

Internal error while overwriting a charecteristic value in a class

Hi,
I am overwriting a charecteristic value in a class with a change master.
In CL02 I entered the class and the chnage number and entered in edit mode.
Then I selected the charecteristic view and selected the specific charectristic which value I need to overwrite and then clicked on "Overwrite Value" button.
Now the system has found an internal error: the required characteristic data was not found in characteristics maintenance.
Charecteristic data not found: Internal Error
Please tell me how can I get out of this error.

hi,
Please check whether the overwriting indicator check box in character tab is select or not.
It should be flagged.
Thanks & regards
Reddiy.

ORA-00600: internal error code, arguments: [ktsircinfo_num1]

While taking export of a table received EXP error and while dropping/selecting the same gor ora-600 errors.
. . exporting table TEST4
EXP-00003: no storage definition found for segment(29, 371385)
SQL >Drop table test4 cascade;
ORA-00600: internal error code, arguments: [ktsircinfo_num1], [29], [29], [371385], [], [], [], []
sql> Desc test4;
ORA-00600: internal error code, arguments: [ktsircinfo_num1], [29], [29], [371385], [], [], [], []
I dont want to log TAR with oracle right now... I tried dropping and recreating Undo tablespace but still did not help much . Database version is 9204

hi
read metalink ID - 153788.1
CHeers

Error while transporting objects:Internal error during pvc call: Parameter

Dear all,
We are facing the following error while transporting the individual configuration objects from our PI development system.
Export failed: Internal error during pvc call: Parameter versionSpecifier or version has the invalid value null .
However, it works fine when the complete configuration scenario is transported.
We tried to transport the objects with different user id's, even then the issue still exists.
Any inputs to resolve this will be highly helpful.
Thank you,
Younus

Hi Mohammed,
Answer is inside this oss [Note 1554387 - Error during export from Integration Directory|https://service.sap.com/sap/support/notes/1554387]. In this oss note, solution is to apply a patch (just a patch, not a SP). as it's a litle sap bug...
Note: your issue is also explained with picture in this one "1550549 - PI transport: Internal error during pvc call" (sorry for this one I cannot insert a link)
regards
Mickael
Edited by: Mickael Huchet on Jan 26, 2012 2:50 PM

SQL Loader (Oracle 8.1.5 on Suse 6.3) Internal Error

Hi all,
I try to insert data with SQL Loader on Linux (Suse 6.3) and get the following message:
SQL*Loader-704: Internal error: ulmtsyn: OCIStmtExecute (tabhp) [-1073747572]
ORA-00942: table or view does not exist
The control file and data file did work on another platform.
Please help me!
Thanks,
Thies Mauker

Lee Bennett (guest) wrote:
:Hi
:I have successfully installed Oracle 8.1.5 Enterprise edition
on
:Suse 6.2 and applied the 8.1.5.0.1 patch set,
NO!
SuSe 6.2 have a patch file for Oracle made from their developers.
Never use Oracle 8.1.5.0.1 patch file that doesn't work because
us bugged.
Use SuSe 6.2 Oracle patch set.
(don't remember the web page where you can download it but a
search with word "oracle" from SuSe homepage will lead you to
it)
-Stefano
null

Internal Error: Error in the Software Update Packa...

hello,
I'm using the latest Ovi Suite and N82 (v30). I saw notification of firmware update and then clicked to update it. the updated was downloaded but when it's in the process of updating it says
Internal Error: Error in the Software Update Package Configuration
I've replugged my device after the system restart but it shows the same.
how do resolve it? neither do i see any option of redownload the update package. where does it download the update package?
thanks

And whatmake you think this is going to help? The answer from local Nokia Care Pointwas: “if you hit the phone it might be the reason for this problems and we arenot responsible for warranty void for your Nokia phone blah blah – of course Idid not hit or throw the phone but never mind – the just don’t care. Thisproblems was described in details to Nokia Care Point Finland and the answerwas … “ we are very sorry, but you need to make a connection with your localNokia Care Point” ha ha – thank you very much, they were so helpful ! That’swhy I don’t want to call or connect Nokia anymore – no help at all! Sorry ifthis information is not good for you, but it is true! Don’t believed it : check THREAD ID:1-4N513T0 from 06.January and THREAD ID:1-4N0DM6A from 05. January. That’s why I need User help, notNokia help.

ORA-00600: internal error when delete master rows in a materialized view

I have a materialized view in 11g2 on Redhat 5, defined asCREATE MATERIALIZED VIEW mv_idty
PARALLEL BUILD IMMEDIATE REFRESH FAST ON COMMIT ENABLE QUERY REWRITE AS
select IDTY_NAME_FIRST,IDTY_NAME_MIDDLE,IDTY_NAME_LAST,IDTY_NAME_SUFFIX,IDTY_SSN,
IDTY_DR_LIC_NUM,IDTY_DR_LIC_STA,x.person_id,i.rowid i_rowid,x.rowid x_rowid
from idty i,person_x_idty x where x.idty_id=i.idty_id; I deleted a few rows from the master tables and get error13:58:48 SQL> delete idty where idty_id like 'test_row%' ;
7 rows deleted.
13:58:52 SQL> commit;
commit
ERROR at line 1:
ORA-12008: error in materialized view refresh path
ORA-00600: internal error code, arguments: [kkzfrfajv_markdml-1], [], [], [], [], [], [], [], [], [], [], [] I have other materialized views and they all delete master OK. This is the simplest one but causes problem. HELP!
Edited by: user13148231 on Aug 11, 2010 5:45 PM

Checked note 743766.1. It is not 100% relevant as it is about import, but the query is usefulselect sowner, vname, mowner, master from sys.snap_reftime$It reveals the materialized view some how based on other schema.
Recreate the materialized view. problem solved.

Reg : Internal error

Similar Messages

Maybe you are looking for