Reg. IW41 User Exit

Hi Experts,
In IW41 transaction, I have to copy the Actual Duration of work field to the Actual work field.
Is it possible? If possible please suggest some exits.

Hi,
The following r the enhancements for IW41
CONFPP01                                PP order conf.: Determine customer specific default values
CONFPP02                                PP order conf.: Customer specific input checks 1
CONFPP03                                PP order conf.: Cust. specific check after op. selection
CONFPP04                                PP order conf.: Customer specific input checks 2
CONFPP05                                PP order conf.: Customer specific enhancements when saving
CONFPP06                                PP Order Confirmations: Actual Data Transfer
CONFPP07                                Single Screen Entry: Inclusion of User-Defined Subscreens
CONFPS01                                PS confirmation: Determine customer specific default values
CONFPS02                                PS confirmation: Customer specific input checks 1
CONFPS03                                PS confirmation: Customer specific check after op. selection
CONFPS04                                PS confirmation: Customer specific input checks 2
CONFPS05                                PS confirmation: Customer specific enhancements when saving
CONF0001                                Enhancements in order confirmation
CONFPI01                                Process order conf.: Calculate cust.specific default values
CONFPI02                                Process order confirmation: Customer spec. input checks 1
CONFPI03                                Process order conf.: Cust. spec. check after op. selection
CONFPI04                                Process order conf.: Customer specific input checks 2
CONFPI05                                Process order conf.: Cust. spec. enhancements when saving
CONFPI06                                Process order confirmation: Actual data transfer
CONFPM01                                PM/SM order conf.: Determine cust. specific default values
CONFPM02                                PM/SM order confirmation: Customer specific input checks 1
CONFPM03                                PM/SM order conf.: Cust. spec. check after op. selection
CONFPM04                                PM/SM order conf.: Customer specific input check 2
CONFPM05                                PM/SM order conf.: Cust. specific enhancements when saving

Similar Messages

Reg. User Exit for TCode FCH5

Hi All,
Is there any user exit for Manual Check Entry Program (Tcode FCH5) that will not allow user
to make any modifications in existing check's.
Thks
Shailesh

Hi,
just mark your question as 'Answered' and give some comments.
Thanks.

Reg. User Exit for MD04 & MD05

Hi All,
The requirement is to put an Indicator 'R' in the ROPInfo column of transactions MD04 & MD05 based on some criteria. Kindly guide is there any user exit using which I can update this ROPInfo Column? If not thru, user exit, is there any other way of doing the same?
Thanks & Regards,
Kiruhtika.M

Hi
New buttons to MD04/MD05 can be added in enhancement M61X0002 - User Exits PP-MRP Material Requirements Planning Evaluations, user-exit EXIT_SAPMM61R_001
Reward points
Regards

Reg: VL01N user exit

Dear all,
I have to put one user exit for the TC - VL01N. When i am doing the sale order in VA01 that time when i am selecting the materials for line items when i am mentioning reason for rejection for any one of material means it should be trigger when i am doing the delivery in VL01N and selecting the sale order and that order any one of material has been rejected means that time when i am selecting the material for doing delivery that time it should be (my coding)trigger. Coding already written by me. I have to know which user exit will trigger for this 'REJECTED MATERIAL WHILE DOING THE DELIVERY THROUGH BY - VL01N TC'
Thanks,
Sankar M

Hi Sankar,
Try these user Exits.
V02V0001 Sales area determination for stock transport order
V02V0002 User exit for storage location determination
V02V0003 User exit for gate + matl staging area determination (h
V02V0004 User Exit for Staging Area Determination (Item)
V50PSTAT Delivery: Item Status Calculation
V50Q0001 Delivery Monitor: User Exits for Filling Display Fields
V50R0001 Collective processing for delivery creation
V50R0002 Collective processing for delivery creation
V50R0004 Calculation of Stock for POs for Shipping Due Date List
V50S0001 User Exits for Delivery Processing
V53C0001 Rough workload calculation in time per item
V53C0002 W&S: RWE enhancement - shipping material type/time slot
V53W0001 User exits for creating picking waves
VMDE0001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0002 Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003 Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004 Shipping Interface: Message SDPACK (Packing, Inbound)
Regards,
Vijay

Reg: CS15 user exit

Hi guys,
In cs15 t.code , how to find the correct exit name to make the plant input field mandatory.
any suggestions please
regards
chandra
Edited by: chandrakanth on Feb 20, 2009 6:34 PM

Hi,
user exits for CS15
PCSD0001            Applications development R/3 BOMS
PCSD0002            BOMs: Customer fields in item
PCSD0003            BOMs: Customer fields in header
PCSD0004            BOM comparison
PCSD0005            BOMs: component check for material items
PCSD0006            Mass changes user exit
PCSD0007            Check changes in STKO
PCSD0008            WBS BOM: Customer-specific explosion for creating
PCSD0009            Order/WBS BOM, determine URL page
PCSD0010            Order/WBS BOM, determine explosion date
PCSD0011            Knowledge-based order BOM, parallel update
PCSD0012            Customer - Mat. number/mat. number during material exchange
PCSD0013            Customer-specific processing of an explosion for BOM browser
PCSD0014            Knowledge-Based Order BOM: Set Status When Fixing
BADIS for CS15
BOM_IPPE             Implementation of the Internal BAdI for the BOM
BOM_UPDATE           Empties Management: BAdI Implementation BOM_UPDATE
BOM_UPDATE           Standard SAP Implementation for Authorization Checks for DM
Regards,
Madhu

Is there a user exit during IW41?

Hi,
Cannot find plant maintenance forum, so I hope the PP folk can help me on this.
I have successfully managed to make my material document able to printed out automatically with your feedback on my previous posting title "Why material document not able to print automatically?".
Now there is a new question which is sort of related to previous post in term of solution given in Note 426554.
We have a plant maintainance order in which when we performed confirmation IW41 (i.e. backflush), a material document of movement type posted with 261 automatically in background. When we open up the material document with MB03, we notice that the system is unable to capture the output condition record, further, the print indicator, and version indicator radio button or checkboxed in header are all unchecked or blank.
However, this is not the case if we will to perform the confirmation step via MB1A (instead of IW41) with movement type 261 and reference to the PM order. The output condition record is appear in the table if using this route.
We have perform all the necessary configuration and condition record setup in MN21, and we also have put in all the user parameter (i.e. NDR, WEV, PRI) in SU2 (user profile), and it work if perform goods issue using the second method (i.e. via MB1A), but condition record not showing if perform the goods issue via IW41. Maybe system is unable to capture all the config and condition records in table, and user paramenter in the profile if perform 261 via IW41??
Thus, my question:
Is there a SAP user-exit in which I can use to intervene during IW41 posting so that I can have my programmer to pull the relevant configuration and output master record from the system?
Regards,
Tuff

Hi,
Try any of the following exits available for IW41 along with your technical consultant :
CONFPM01                                PM/SM order conf.: Determine cust. specific default values
CONFPM02                                PM/SM order confirmation: Customer specific input checks 1
CONFPM03                                PM/SM order conf.: Cust. spec. check after op. selection
CONFPM04                                PM/SM order conf.: Customer specific input check 2
CONFPM05                                PM/SM order conf.: Cust. specific enhancements when saving
CONF0001                                Enhancements in order confirmation
HOpe this helps.
Regards,
Tejas

REG:USER EXIT FOR DATA SOURCE 0HR_LSO_1

Hi ,
I have to write the enhancement ABAP code for data source 0HR_LSO_1 which is related to module " training and event management "(also known as LMS or LSO) in ECC 6.0 .
So how can I find out appropriate user exit for the same .I have to concentrate on the field "kostl (cost centre)" in that data source .
Please provide some suggestions .
Thanking You ,
Tarun Brijwani .

Hi Tarun...
I this might help you.
In the HR System:
1) T-CODE: CMOD
2) Choose an existing project (vg: Z12345)
3) Modify
4) Press Components button
5) Look for the enhance: RSAP0001 (the BW extracting enhancement)
6) The you have one of the following option:
a- If the Data Source is "transaction data": The exit is "EXIT_SAPLRSAP_001"
b- If the Data Source is "master data": The exit is "EXIT_SAPLRSAP_002"
7) double-click in the appropriate one
8) You'll see an INCLUDE sentence. Could be this ZXRSAU01 or this ZXRSAU02 (depending on the previous step). Double-click and you'll be redirected to the SE38
9) some code:
CASE i_datasource
WHEN '0HR_LSO_1'.
    LOOP i_t_data INTO my_struct
       my_struct-KOSTL           "Here you'll must have your Cost Center
       ...etc...etc...etc
    ENDLOOP.
WHEN OTHERS.
ENDCASE
Hope it helps.
gdmon

Reg:User-Exit In Sales Order to Invoice

Hi All,
I have An requirement that to create automatic sales order and invoice in one go, i have used BAPI_SALESORDER_CREATEFROMDAT2 to create sales order and bdc invoice to create invoice its worked fine.
My problem is now i got an requirement as after creating sales order it should not create invoice as such because they will manually check whether the sales order is correct then only i should proceed to invoice also they need the option to create,change,delete sales order and same too invoice how can i acheive this scenario through user exits?
Since am new to user exit can any one tell me how to use user exits and what user exits need like this scenario?

Hi Suresh,
For sales order following user exits can be used. These are available in include MV45AFZZ.
USEREXIT_DELETE_DOCUMENT : At the time of deletion of sales order
USEREXIT_SAVE_DOCUMENT : At the time of updations or creation of sales order.
Following are the user exits available in smod.
SDVFX007 User exit: Billing plan during transfer to Accounting
SDVFX008 User exit: Processing of transfer structures SD-FI
SDVFX009 Billing doc. processing KIDONO (payment reference numbe
SDVFX010 User exit item table for the customer lines
SDVFX011 Userexit for the komkcv- and kompcv-structures
V05I0001 User exits for billing index
V05N0001 User Exits for Printing Billing Docs. using POR Procedu
V60A0001 Customer functions in the billing document
V60P0001 Data provision for additional fields for display in lis
V61A0001 Customer enhancement: Pricing
Please check this exits which will help you for your requirement.
Thanks,
Naveen Kumar.

REG : user exit

hi,
    i am writing this code in user exit MV45AFZZ for va32 and va02 transaction.it is working fine but the problem is whatever i select the first line item it is not responding corectly.ther then first line item the other line items are working properly and in va32 transaction when i select item overview tab then also the program is not working properly please help me out
LOOP AT XVBAP.
IF TCTRL_U_ERF_AUFTRAG-CURRENT_LINE = SY-TABIX
OR TCTRL_U_ERF_LIEFERPLAN-CURRENT_LINE = SY-TABIX.
SELECT VBELN POSNR ZEILE MATNR VTWEG WERKS DISPO
         M1QTY M1QTY01 M1QTY02 M1QTY03 M1QTY04 MONYR KUNNR
         INTO CORRESPONDING FIELDS OF TABLE IDEMAND
         FROM ZSDDEM WHERE VBELN EQ VBAK-VBELN
                     AND   POSNR EQ XVBAP-POSNR
                     AND   MATNR EQ XVBAP-MATNR
                     AND   KUNNR EQ KUAGV-KUNNR.
SORT IDEMAND BY VBELN POSNR ZEILE DESCENDING.
LOOP AT IDEMAND.
SELECT MAX( ZEILE ) INTO WA_ZEILE
                FROM ZSDDEM WHERE MONYR EQ IDEMAND-MONYR
                            AND   VBELN EQ IDEMAND-VBELN
                            AND   POSNR EQ IDEMAND-POSNR.
                           AND   KUNNR EQ IDEMAND-KUNNR
                           AND   MATNR EQ IDEMAND-MATNR
IF SY-SUBRC = 0.
IF WA_ZEILE EQ IDEMAND-ZEILE.
TOTQ = TOTQ + IDEMAND-M1QTY.
ELSE.
DELETE IDEMAND INDEX SY-TABIX.
ENDIF.
ENDIF.
ENDLOOP.
IF TOTQ > 0.
    MESSAGE E020(ZSD_AMP) WITH TOTQ.
ENDIF.
ENDIF.
ENDLOOP.
ENDIF.

Hi,
Can you please check the below sap note?
Note 414421 - Creating or transferring simulat. version: CONVT_NO_NUMBER
Please also check
2.      0.410      PS-ST-WBS      449922      CJVB_PRPS_POST: ERR_UPDATE during update on table PRPS      27.02.2002
     3.      0.400      PS-SIM      805384      CJV2; network structure graphic; create activity: NOT_FOUND      30.12.2004
     4.      0.370      PS-SIM      379157      CJV4: SAPSQL_ARRAY_INSERT_DUPREC in SAPLV60F      24.03.2003
     5.      0.340      SV-SMB-AIO-BP-IMC      612325      Coll.note: BP Industrial Machinery & Components (IM&C)V3.46C      25.08.2003
Thanks,
Ramakrishna

Reg :- For Updating WBS in MIRO (any User Exits or Enhancements)

Hi,
I have a requirment while doing MIRO,
I am selecting 'Calculate Tax' Checkbox to update G/L accounts specified for a particular TAX code in the MIRO Screen simultaneously I want to update WBS element for that G/L accounts specified in the TAX code in MIRO level.
Can anyone suggest any Enhancements or User Exits available for this else provide solution for this.
With Thanks,
Dina

Hi,
have a look at badi INVOICE_UPDATE.
Best regards.

IW41 - Storage Location Control (User Exit)

Hi,
While I'm trying to use function Goods Movement in PM order confirmation, I only want to consume ingredients from one storage location.
Is there any user exit for this control?
Thank & Regards,
Begum

Hi Venkatesan,
Thanks for your reply. We first try to use the user exit CMFU0002 - Set parameters for time confirmation and goods movements. However, the system doesn't see this user exit while we are trying to consume materials from a storage location.
Best regards,
Begü

Reg:user-exits

hi to all ,
iam new to user-exits.i had seen some user-exits.
in which some are like FUNCTION EXIT_SAPMV45A_002,
FORM USEREXIT_FIELD_MODIFICATION.so what is the difference between them
are there any more exits.
with regards
satish

Hi,
1)
For the FUNCTION EXIT_SAPMV45A_002, you require a project in CMOD with the enhancement in it..Then the project should be activated in order to execute the code give in the FM..
For FM FUNCTION EXIT_SAPMV45A_002..You don't require an access key.
2) For user exit FORM USEREXIT_FIELD_MODIFICATION. You don't require a project in CMOD..You require an access key to modify the program.
Thanks,
Naren

Reg User Exit SUSR0001

Hi all,
   Facing problem with user exit SUSR0001.
    When we login through GUI control is flowing through the exit, but when we login
through RFC, control is not flowing through the exit.
Wt to do if we want need any validation while we login through RFC.
    Suggestions pls.
Regard's
Jean.

Jean wrote:
...when we login through RFC, control is not flowing through the exit
Hi,
usually in the RFC connections, Service user or Background user types are always specified...
These kind of users are no-dialog user and therefore the userexit you implemented is not executed.
In the link below you can find some information about RFC user management.
[http://help.sap.com/saphelp_nw04s/helpdata/en/ed/8d7b64ee75ef4cb42358427613fa95/content.htm]
Regards,
Andrea

Reg: user Exit or BADI

Hi Guys,
I have a requirement like i need to save delivery header texts in VL02N transaction while creation of return delivery order, can any one tell the which user exit or BADI..
Regards,
mahendar .

Exit Name           Description
V02V0001            Sales area determination for stock transport order
V02V0002            User exit for storage location determination
V02V0003            User exit for gate + matl staging area determination (headr)
V02V0004            User Exit for Staging Area Determination (Item)
V50PSTAT            Delivery: Item Status Calculation
V50Q0001            Delivery Monitor: User Exits for Filling Display Fields
V50R0001            Collective processing for delivery creation
V50R0002            Collective processing for delivery creation
V50R0004            Calculation of Stock for POs for Shipping Due Date List
V50S0001            User Exits for Delivery Processing
V53C0001            Rough workload calculation in time per item
V53C0002            W&S: RWE enhancement - shipping material type/time slot
V53W0001            User exits for creating picking waves
VMDE0001            Shipping Interface: Error Handling - Inbound IDoc
VMDE0002            Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003            Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004            Shipping Interface: Message SDPACK (Packing, Inbound)
BADI
DELIVERY_ADDR_SAP Address Change in Delivery Processing
DELIVERY_PUBLISH Announcement of delivery data during database update
Edited by: Phanindra Annaparthi on Mar 30, 2009 6:59 AM

Reg user exit used for reading VB items

Dear all,
Please give me the details of user exit used when we run plant level MRP by MDBT, so that it will create
purchase requisitions only for consumables VB items, please explain how it works.
Thanks in advance

Hi,
Can you explain what you mean by
create purchase requisitions only for consumables VB items
So for others you want to have planned orders?
Regards,
Vivek

Reg. IW41 User Exit

Similar Messages

Maybe you are looking for