Reg. Line Numbering to the whole activeDocument

Hi All,
I have gone through most of the sites to put line numbers to the whole activeDocument but I could find only applying the line numbers for first page.
Anybody please help me out to add line numbers to the entire activeDocument with continuos number?
Any help is greatly appreciated.
~Sathya Rani M

Hi,
Thank you for the script. This I have found earlier and this is showing demo.
I need to add numbers continuosly without any text.
Please advice.
~Sathya Rani M

Similar Messages

Is it possible to view line numbers in the search results in Dreamweaver CS5?

Is it possible to view line numbers in the search results in Dreamweaver CS5?
If so how do I switch it on.
Thanks

I don't think so.
Just double click on results in your Results Panel.
DW will open the page to that line of code.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/

Is there a way to add line numbers in the margin?

Is there a way to automatically add line numbers in the margin of a document?

Hi Brian,
If you go with Peter's suggestion, there are some details that since I've got a minute here, I'll mention...
Set your Line Spacing for the document text to "Exactly" before you begin adjusting your table, otherwise you will have registration problems.
Your Table will have to be a Floating object. Otherwise you won't be able to slide it into the margin. And, speaking of the margin, stay out of the gray area with the numbers if you want to print them. The gray border around your document is the area that the printer driver says is non-printable.
In the Table Inspector, set Columns to 1 and Rows to 20 or whatever you prefer for your document. Set the number of Header Rows to 0.
To apply the numbering, use the Fill feature: Type 1 in the first cell, type 2 in the second cell. Select both cells. Grab the Fill Handle in the lower right corner of the selection and drag it down to add a series of numbers to the rest of the column. (Easier than typing.)
Decide how you want to justify the numbering. The Text Inspector has both vertical and horizontal justification controls for this. Just select the entire table and make the settings.
Set the cell height to match the text line spacing. You can get close with the table row height, and maybe closer with a minor line spacing adjustment. Don't expect perfection, but you can get pretty close.
You probably don't want the cell borders to show, so with the entire table selected, go to the Graphic Inspector and set Stroke to None.
Lastly, cause the table to appear on every page by doing: Format > Advanced > Move Object to Section Master.
Regards,
Jerry

I tried updating my iPod touch 4th gen and now the screen is bright blue or flashing white and black lines.ive tried the whole home and power button thing but it only brings up the apple icons then goes back to the blue or other screen.please help?

I tried updating my iPod touch 4th gen and now the screen is bright blue or flashing white and black lines.ive tried the whole home and power button thing but it only brings up the apple icons then goes back to the blue or other screen.please help?

This has worked for some others.
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I've just bought an iPad and there's a line that runs the whole length of the screen about an inch from the outside edge of the screen. Have I bought a faulty product?

I've just bought an iPad and there's a line that runs the whole length of the screen about an inch from the outside edge of the screen. Have I bought a faulty product?

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

How to type part of a word and have Numbers suggest the whole word as previously used?

I track a budget in a table, using a limited set of category names in a column. After typing in a few items and category names, later items use the same category names. In Numbers 2.0, I could type the first characters of a category name and Numbers would suggest/guess the whole category name as used in earlier entries. That allowed me to choose it quickly without retyping the whole word. How to do this in Numbers 3.0?

choose it quickly without retyping the whole word. How to do this in Numbers 3.0?
Here's how you can do something like this in Numbers 3.0. In many (probably most) situations it's better than "auto complete".
Numbers 3 has an enhanced Pop-Up Menu functionality that helps prevent typos or capitalization inconsistencies from creeping in and messing up your data. It is also much more efficient than auto-complete in Numbers for iOS, should you ever want to sync to an iPad or iPhone and do data entry there.
Pop-Up Menu is much enhanced over what it was in Numbers 2.3, and is easy to set up:
Select the whole column or range before formatting as Pop-Up Menu and your existing values in that column or range will pre-populate a menu automatically:
Then you can remove the values you don't want in the list, such as the column header (and possibly some previous spelling errors too!):
And after this easy one-time setup all you have to do thereafter is to choose from the pop-up list when you add rows:
See this post for more details on how this handy feature has been enhanced in Numbers 3.0.
Should you ever want to take your Numbers with you and do data entry on an iPad or iPhone, in a touch interface, pop-ups are much more efficient than typing the first few letters of items. You can scroll with ease through a list of dozens of items to make a pick. Anybody using Numbers cross-platform should favor Pop-Up so they can use their documents efficiently for data input on the go, which can be a productivity booster.
See this thread for this and other workarounds for Numbers 3.0.
SG

How can I insert a vertical line between two underlined unfilled with text lines. I am trying to construct an invoice and I need a break. If I try any of the shapes or inset functions it eliminates my underlined lines and shifts the whole document.

I am trying to construct an invoice. How can I install a vertical line between two or more underlined lines to create a break. I have tried the insert, shapes and nothing works. If I try any of the functions the whole document shifts to the right and I loose some of the lines. Is there a work around, or is I work not able to do what I want?
Thanks
Armand

It sounds as though you may have "Object Causes Wrap" activated for the Line Shape. This will push other content away.
See the Wrap Inspector.
Jerry

Is it possible to obtain line numbers in the stack trace of an exception

Is it possible for e.StackTrace in the following code to contain line numbers?
try
catch(Exception e)
LogStackTrace("Stack Trace:" + e.StackTrace);}
Hong

Thank you for your response.
The linked article is for Windows Phone and it points out "it's not possible to deploy the PDB alongside the EXE/DLL". Is this also the case for Windows Store app, or Windows Store app is different and it can be deployed with a .pdb file as you
pointed out?
The Windows Store app package is like the following:
My App_1.3.0.5_AnyCPU.appxupload
It is a zip file that contains the following two files:
My App_1.3.0.5_AnyCPU.appx
My App_1.3.0.5_AnyCPU.appxsym
Hong

How do I display line numbers? I am using the International Digital Publishing Forum EPUB Validator and the error messages refer to line numbers. Thanks, Earl

The validator gives me error messages messages that refer to line numbers and positions - very unhelpful. I need to be able to display the line numbers in the reader to find the places where the errors are. Can anybody point me in the right direction? MUch appreciated. Earl

Adobe Reader can't display epub files. Adobe Reader can't display line numbers.

How to print line numbers in NWDS for Java?

Hi everyone,
does someone know how to print out program code with line numbers from the Netweaver Developer Studio for Java? This is inevitable for code reviews.
In Eclipse 3.4 this issue is solved. Is there possibly such a patch for NWDS as well?
Thanks,
Maria

Hi Pascal,
thanks for the quick reply. The setting you mention displays line numbers on the screen alright, but printing out does not work.
We use: SAP NetWeaver Developer Studio for SAP NetWeaver 7.1 SP06 PAT0000, Build id: 200807051938.
I guess it just does not work, because it was fixed only for Eclipse 3.4, and the above NWDS version bases on Eclipse 3.3.
What do you recommend for code inspections - copy/paste into PSPad or do you know a more comfortable practice?
Greetings
Maria

How to read a file and save the line number of the last line read?

Hi,
I am using RandomAccessFile and file as my class. I am trying to read a log file as it gets updated and print it out to a java window. i so far have the framework setup but dont know how to save the last line number so.
i need this variable so i dont reprint out the same line numbers to the java window. please advise.
thanks!

hi,
i now have the line number of the last line read, but now when i reopen the file, how can i skip that number of lines?
thanks,

Bug with Worksheet Line Numbers in 2.1?

I'm seeing an "issue" with line numbers enabled in the worksheet. When i have a plsql block with nested procedure/functions, and I collapse/expand the nested code, the line numbers in the worksheet don't consistently update till I resize the window.
Example)
1 [-] declare
2 [-]   function f1
3       return number
4       as
5         return null;
6       end f1;
7     begin
8       dbms_output.put_line(f1) ;
9     end;
10    /turns into this when I collapse:
1 [-] declare
2 [+]   function f1...
3     begin
4       dbms_output.put_line(f1) ;
5     end;
6     /but turns into this when I resize sel developer:
1 [-] declare
2 [+]   function f1...
7     begin
8       dbms_output.put_line(f1) ;
9     end;
10    /I'm using the 2.1 release with the included JDK on a WinXpSP2 box.

Hi Dylan,
Thanks for this feedback.
I have log a bug for tracking.
Bug 8982049 - FORUM:LINENUMBER IS GUTTER NOT REFRESHED AFTER FOLDING
Regards,
Dermot.
SQL Developer Team

JSP compiler obfuscates generated servlet debug line numbers

          Here's something that's been baffling me for a couple of days now.
          When WebLogic parses a JSP into servlet Java source, and then compiles the Java
          source into a class, it seems to perform a further step to obfuscate debug line
          numbers in the _jspService method. This converts the debug line numbers from Java
          source code line numbers into JSP line numbers.
          At first sight, this may appear to be useful- it means that when an exception
          is thrown then it references a line number in the original JSP rather than one
          in the generated servlet. However, it actually makes life more difficult when
          you consider included JSPs.
          Suppose you have a file loginresult.jsp, which uses @include to include a header.jsp
          and footer.jsp, both of which contain dynamic content. When WebLogic converts
          line numbers, it ignores the JSP that the code came from, so this causes a many-to-one
          mapping of line numbers. When an error occurs, the exception will tell you the
          line number that it came from, but it won't tell you which JSP caused it. The
          many-to-one mapping ensures a loss of information- and no way of retrieving the
          real line numbers.
          This is an even bigger nuisance when trying to debug JSPs- the debugger hops around
          in the generated servlet file without giving any clue as to whereabouts it really
          is in the code.
          My question is: is there any way of switching off this post-processor behaviour?
          One obvious way would be to locate the WebLogic class that does this post-processing,
          stub it out and run WebLogic with this class higher up in the classpath. But that's
          a last resort.
          Secondly, would there be any other impact in turning off this behaviour? Do other
          parts of WebLogic rely on this?
          Thanks in advance,
          Kevin.


Actually, this option turns line-number table replacement on and off, for example,
          with jsp like this:
          test.jsp
          <%
          throw new Exception();
          %>
          and weblogic.xml:
          <!DOCTYPE weblogic-web-app PUBLIC "-//BEA
          Systems, Inc.//DTD Web Application 7.0//EN"
          "http://www.bea.com/servers/wls700/dtd/weblogic700-web-jar.dtd">
          <weblogic-web-app>
          <jsp-descriptor>
          <jsp-param>
          <param-name>debug</param-name>
          <param-value>true</param-value>
          </jsp-param>
          </jsp-descriptor>
          </weblogic-web-app>
          the stacktrace looks like this (note line number 2 - this is JSP line number):
          java.lang.Exception
          at jsp_servlet.__test._jspService(test.jsp:2)
          at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
          at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:945)
          at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:332)
          at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:376)
          at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:242)
          at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:5360)
          at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:721)
          at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3043)
          at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2468)
          at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:152)
          at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:133)
          and with debug option turned off:
          <!DOCTYPE weblogic-web-app PUBLIC "-//BEA
          Systems, Inc.//DTD Web Application 7.0//EN"
          "http://www.bea.com/servers/wls700/dtd/weblogic700-web-jar.dtd">
          <weblogic-web-app>
          <jsp-descriptor>
          <jsp-param>
          <param-name>debug</param-name>
          <param-value>false</param-value>
          </jsp-param>
          </jsp-descriptor>
          </weblogic-web-app>
          exception stacktrace looks like this (note that line number now is from generated .java file):
          java.lang.Exception
          at jsp_servlet.__test._jspService(__test.java:87)
          at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
          at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:945)
          at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:332)
          at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:376)
          at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:242)
          at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:5360)
          at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:721)
          at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3043)
          at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2468)
          at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:152)
          at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:133)
          Kevin Thomas <[email protected]> wrote:
          > But this isn't useful, as you don't know which JSP the line number is referring
          > to! (did it come from the main JSP, or one of the files that it included?)
          > Turning debug off is not an answer- because that will lose other useful information
          > that is useful to the debugger.
          > Kevin.
          > "Dimitri I. Rakitine" <[email protected]> wrote:
          >>Actually, this is useful when you want to debug .jsp's and not generated
          >>..java files. Did you try setting 'debug' jsp-param in the weblogic.xml
          >>to
          >>false? I think it turns class postprocessing on and off.
          >>
          >>Kevin Thomas <[email protected]> wrote:
          >>
          >>> Here's something that's been baffling me for a couple of days now.
          >>
          >>> When WebLogic parses a JSP into servlet Java source, and then compiles
          >>the Java
          >>> source into a class, it seems to perform a further step to obfuscate
          >>debug line
          >>> numbers in the _jspService method. This converts the debug line numbers
          >>from Java
          >>> source code line numbers into JSP line numbers.
          >>
          >>> At first sight, this may appear to be useful- it means that when an
          >>exception
          >>> is thrown then it references a line number in the original JSP rather
          >>than one
          >>> in the generated servlet. However, it actually makes life more difficult
          >>when
          >>> you consider included JSPs.
          >>
          >>> Suppose you have a file loginresult.jsp, which uses @include to include
          >>a header.jsp
          >>> and footer.jsp, both of which contain dynamic content. When WebLogic
          >>converts
          >>> line numbers, it ignores the JSP that the code came from, so this causes
          >>a many-to-one
          >>> mapping of line numbers. When an error occurs, the exception will tell
          >>you the
          >>> line number that it came from, but it won't tell you which JSP caused
          >>it. The
          >>> many-to-one mapping ensures a loss of information- and no way of retrieving
          >>the
          >>> real line numbers.
          >>
          >>> This is an even bigger nuisance when trying to debug JSPs- the debugger
          >>hops around
          >>> in the generated servlet file without giving any clue as to whereabouts
          >>it really
          >>> is in the code.
          >>
          >>> My question is: is there any way of switching off this post-processor
          >>behaviour?
          >>> One obvious way would be to locate the WebLogic class that does this
          >>post-processing,
          >>> stub it out and run WebLogic with this class higher up in the classpath.
          >>But that's
          >>> a last resort.
          >>
          >>> Secondly, would there be any other impact in turning off this behaviour?
          >>Do other
          >>> parts of WebLogic rely on this?
          >>
          >>> Thanks in advance,
          >>
          >>> Kevin.
          >>
          >>--
          >>Dimitri
          >>
          Dimitri

AR Invoice Line Numbers and Sales Order line numbers are not in Sync.

Hi,
There is an AR Invoic with 2 lines and SO with 2 lines. The line numbers on the Invoice and SO are not in Sync. SO line No 2 is Invoice line No1 and SO line No1 is Invoice Line No2. What determines the Invoice line numbering?
Thanks

Hi,
Goto the T.Code "VOV7".
Select your item category.
Details.
Maintain the Completion rule as "A(Item is completed with the first reference)".
Save.
If you do this after the follow on document is created,the item is completed and you cannot reject the item.
For your second question,
Goto the T.Code "VTLA".
Select your valid combination.
Click on item.Select your item category.Details.
There is a check box called as "Update document flow".Tick that one.
Save.
Regards,
Krishna.

[svn:fx-4.0.0] 13535: Part 1 of fixing line endings in AS and MXML files so that line numbers are correct while debugging .

Revision: 13535
Revision: 13535
Author:   [email protected]
Date:     2010-01-15 14:45:38 -0800 (Fri, 15 Jan 2010)
Log Message:
Part 1 of fixing line endings in AS and MXML files so that line numbers are correct while debugging.
We've got a widespread problem with line-endings (\r\n vs \n vs \r) because not all our files have svn:eol-style set to "native". (With this setting, the line endings are adjusted for the platform that you check out code onto. Without it, you can end up with all-Mac line endings on a Windows machine, WindowsMacUnix line endings on a Mac, etc. The goal is all-Win on Win, all-Mac on Mac, etc.)
For schedule reasons, we've decided to minimize risk by fixing only AS and MXML files in frameworks/projects that contribute to our SWCs, because here line-ending problems can throw off line numbers and the debugger doesn't step through the right lines of code.
You can't set svn:eol-style to "native" unless the line endings are already correct for your platform. Since I'm on Windows, I wrote a script to find a fix the files that had any \n or \n line endings. The files now have \r\n.
QE notes: None
Doc notes: None
Bugs: SDK-24966
Reviewer: Pete
Tests run: checkintests
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-24966
Modified Paths:
    flex/sdk/branches/4.0.0/frameworks/projects/framework/src/mx/core/IDeferredContentOwner.a s
    flex/sdk/branches/4.0.0/frameworks/projects/framework/src/mx/core/ISelectableList.as
    flex/sdk/branches/4.0.0/frameworks/projects/framework/src/mx/core/LayoutElementUIComponen tUtils.as
    flex/sdk/branches/4.0.0/frameworks/projects/framework/src/mx/geom/CompoundTransform.as
    flex/sdk/branches/4.0.0/frameworks/projects/framework/src/mx/geom/TransformOffsets.as
    flex/sdk/branches/4.0.0/frameworks/projects/framework/src/mx/skins/halo/WindowBackground. as
    flex/sdk/branches/4.0.0/frameworks/projects/framework/src/mx/utils/MatrixUtil.as
    flex/sdk/branches/4.0.0/frameworks/projects/framework/src/mx/utils/OnDemandEventDispatche r.as
    flex/sdk/branches/4.0.0/frameworks/projects/osmf/src/org/osmf/media/MediaFactory.as
    flex/sdk/branches/4.0.0/frameworks/projects/rpc/src/mx/rpc/http/HTTPMultiService.as
    flex/sdk/branches/4.0.0/frameworks/projects/rpc/src/mx/rpc/http/Operation.as
    flex/sdk/branches/4.0.0/frameworks/projects/rpc/src/mx/rpc/http/mxml/HTTPMultiService.as
    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/components/ButtonBar.as
    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/components/DropDownList.as
    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/components/HSlider.as
    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/components/Panel.as
    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/components/PopUpAnchor.as
    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/components/Scroller.as
    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/components/mediaClasses/Volum eBar.as
    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/components/supportClasses/Dro pDownController.as
    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/components/supportClasses/Dro pDownListBase.as
    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/components/supportClasses/Scr ollerLayout.as
    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/components/supportClasses/Sli derBase.as
    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/effects/AnimateTransform.as
    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/effects/supportClasses/Animat eTransformInstance.as
    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/effects/supportClasses/MoveIn stance.as
    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/events/SkinPartEvent.as
    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/skins/spark/HighlightBitmapCa ptureSkin.as
    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/skins/spark/ScrollerSkin.mxml
    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/styles/metadata/AdvancedInher itingTextStyles.as
    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/styles/metadata/AdvancedNonIn heritingTextStyles.as
    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/utils/LabelUtil.as
    flex/sdk/branches/4.0.0/frameworks/projects/wireframe/src/spark/skins/wireframe/NumericSt epperTextInputSkin.mxml

Hi there,
I follow the help from this post
How to handle line break embeded inside CSV column
Not a perfect way, but it is accepted in my case.
Cheers,

Reg. Line Numbering to the whole activeDocument

Similar Messages

Maybe you are looking for