Reg Link to Knowledge Management in Java system

Hello All,
Kindly let me know if this is possible.If so pls give some hints on the same.
We have a system for maintaining documents and related information in Java.
The requirement is that..
1. When we upload a document using the interface in the java system, the document should be stored in SAP Knowledge Management (EP) - ie the filesystem of Enterprise Portal Server.
2. When the user comes back, a link needs to be provided in the Java system interface to access the document stored in KM.
3. To provide a search facility in the java system to search for the document stored in KM.
Your help would be very much appreciated..
Regards,
venkat.

Hi Venkat,
the answers to your questions directly depend on the features your java app provides. Can you access WebDAV? This would be the easiest way.
If not and the app is self made, just have a look at Tomcat Servlet Engine, which comes with a WebDAV example implementation.
Alternatively you can store your files via shared folder in a file repository accessed by KM. This way you will loose the ability to work with meta data, but it's easier to implement. Take a look at these blogs:
https://weblogs.sdn.sap.com/pub/wlg/2541
https://weblogs.sdn.sap.com/pub/wlg/2571
https://weblogs.sdn.sap.com/pub/wlg/3500
To get a link to your documents, just use standard KM servlet. If you have problems with this, please come back and I'll help.
HTH,
Carsten

Similar Messages

Integrating WebSphere Portal Server with Sun Java System Access Manager

Hi All,
Is it possible to Integrate WebSphere Portal Server with Sun java System Access Manager?. If so plz send me any doc or web site link for the same.
Thanks in Advance
Rgds,
Lessly J

Rushi-Reliance wrote:
Kindly let us know how to proceed further as we are waiiting some reply from your team.As I already advised in your previous posting (http://forums.sun.com/thread.jspa?threadID=5359095), you are best off re-installing solaris from scratch and installing Communication Suite 6 update 1 if you cannot get Access Manager 7.1 configured.
Regards
Shane.

SAP NW 7.4 as java system sync with solution manager system 7.1 issue

Dear all,
I have installed SAP NW 7.4 system SP level is SP5 ,after that i have cheked in service marlket palce Now service market plkace latest SP level SP7.
For manula downlowd( directly from service market place) is difficult for java system and i have started sysnc with solution manager system to download patches through MOPZ.
Below are the activities completed:
1) Through template installed I have rgeisterd the system into Solman SLD.
2) Sync completed succfully exact product version is shwoing in solman SLD
3) after that I have checked in SMSY and LMDB its showing prefectly
4) But in SMSY its shwoing only under technical system,not showing product systems
5) I have assigned in product system in LMDB
Now the issues while selecting the system group and logical componensts I have created one logical componnets -but in that SAP NW 7.4 is not showing and I have assumed SAP NW 7.3 EHP1 after creating my newly create dsystem is not shwoing in drop down.
I ma getting belwo error.
No system found for this product/product instance
Message no. SOLAR_SPROJECT110
Please sugegst how to reslove the error ,and a;lso please let me know is there any way to download latest pathces to dpownload from service market place .
Advance Thanks

Hi,
re-check if the 7.4 system is correctly registered in the solman SLD system.
Re-check LMDB definition for your 7.4 as JAVA system. you have to manually created the Product system. Ensure all the Component and definitions are correct.
Also do a verrification run within the LMDB. This will confirm whether all the information is correctly defined.
Please note - SLD -> LMDB -> SMSY.
So, if the first 2 don't have the correct information, you wont have much joy with smsy.
Rgds
Deepak

Not able to start the Sun Java System Access Manager 7 Console

Hi All,
I have successfully installed the Sun Java System Portal Server 7 on RHEL 4.0.The problem I am facing is not able to start the Sun Java System Access Manager 7 Console while accessing the URL: http://fqdn:8080/amconsole
As soon as I try to access this URL it gives me following Excepiton:::::::
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
com.iplanet.jato.NavigationException: Exception encountered during forward
Root cause = [java.lang.NullPointerException]
     com.iplanet.jato.view.ViewBeanBase.forward(ViewBeanBase.java:386)
     com.iplanet.jato.view.ViewBeanBase.forwardTo(ViewBeanBase.java:267)
     com.iplanet.am.console.base.ConsoleServletBase.onUncaughtException(ConsoleServletBase.java:338)
     com.iplanet.jato.ApplicationServletBase.fireUncaughtException(ApplicationServletBase.java:1023)
     com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:469)
     com.iplanet.jato.ApplicationServletBase.doPost(ApplicationServletBase.java:324)
     com.iplanet.jato.ApplicationServletBase.doGet(ApplicationServletBase.java:294)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:747)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
     sun.reflect.GeneratedMethodAccessor106.invoke(Unknown Source)
     sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     java.lang.reflect.Method.invoke(Method.java:585)
     org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
     java.security.AccessController.doPrivileged(Native Method)
     javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
     org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
If anyone have any idea about the cause of this error,please let me know.All suggestions are welcome .
Thanx and Regards,
Chirag.

Hi All,
I am having exactly the same problem with the same stack trace. Has anybody have an idea how to fix this?
I have downloaded the Java Identity Management Suite.(java_es-5-identsuite-ga-windows-x86.zip) The first time installation was fine and I was able to bring the Access Manager console. I was able to create users groups etc.
However, when I uninstalled and installed it again, I got exactly the same error described in the thread. Running "amserver start" and "amserver restart" did not help. I did the installation one more time
but again I got the same error.
Thanks for the help.
celikkan

Tivoli Access Manager 6.0 with Sun Java System Directory 6.3

Hi,
We have been using Tivoli Access Manager 6.0 with Sun Java System Directory 6.3 .
Using IBM TAM Java API we can administer the user creation but the API provide support only to create user with required attribute as user name, password, description, setAccoutntvalid etc.
But Sun Java System Directory 6.3 contains the many attributes as just to name a few...
First Name (givenname), User ID (uid),Password (userPassword), Confirm Password
E-mail (mail), Telephone Number (telephoneNumber), Country (c),Fax Number (facsimileTelephoneNumber), Locality (l), Organization (o), Organizational Unit (ou), accessHint, accountHint, departmentNumber, description, destinationIndicator, displayName, employeeNumber ETC...
Now My Issue is if we need to add the values for other attributes as "accessHint" , "employeeNumber" etc, then how can we acheive using IBM TAM Java API or is there any other way.
Thanks for your kind help...

Looks like the attribute sunIdentityServerDiscoEntries is defined twice in the schema. Run the following and see where it is defined for the second time.
# cd /var/opt/SUNWdsee/dsins1/config/schema
# grep -w sunIdentityServerDiscoEntries *.ldif | grep -iv objectclasses
Edited by: etst123 on Mar 3, 2009 1:28 PM

Sun Java System Identity Manager 7.1 PasswordSync direct mode ERROR!

Hello,i wanna use direct mode to config the Sun Java System Identity Manager PasswordSync to avoid the complex configuration of JMS, but I get the following error in logs:
03/26/2008 10.52.34.062000 [2164] (../../../src/wps/passwordsync/lhpwic.cpp,591): EndpointURL: http://idmzone1.gmcc.net:8080/idm/servlet/rpcrouter2
03/26/2008 10.52.34.062000 [2164] (../../../../src/wps/agent/connect/RAEncryptor.cpp,69): RAEncryptor::Decrypt3DES: input length (16) moded to 2
03/26/2008 10.52.34.062000 [2164] (../../../src/wps/passwordsync/lhpwic.cpp,624): about to login...
03/26/2008 10.52.34.109000 [2164] (../../../src/wps/passwordsync/lhpwic.cpp,628): Login failed error code : -1072896682. Disassembing client
03/26/2008 10.52.34.109000 [2164] (../../../src/wps/passwordsync/lhpwic.cpp,648): Exit: GetClient
03/26/2008 10.52.34.109000 [2164] (../../../src/wps/passwordsync/lhpwic.cpp,916): Error getting our soap, bailing out.
It is really difficult to find the way to resolve this probblem..... PasswordSync direct mode works fine in 6.0 in my VM.. but error here in 7.1.
Is there anyone can give me a suggestion? Thanks you very much!

Tried Hot fix 81 also still giving me the error and re-rigisterd dotnet.dll
Log File for Hot fix 81
(../../../src/wps/passwordsync/lhpwic.cpp,559): Error reading dumpFileBase, no dump file generation on exception
(../../../src/wps/passwordsync/lhpwic.cpp,567): Exit: ReadRegistrySettings
(../../../src/wps/passwordsync/lhpwic.cpp,593): Soap client created
(../../../src/wps/passwordsync/lhpwic.cpp,594): ClientTimeout: 18000
(../../../src/wps/passwordsync/lhpwic.cpp,604): Proxy server not specified
(../../../src/wps/passwordsync/lhpwic.cpp,608): EndpointURL: http://idm-dev:80/idm/servlet/rpcrouter2
(../../../../src/wps/agent/connect/RAEncryptor.cpp,69): RAEncryptor::Decrypt3DES: input length (16) moded to 2
(../../../src/wps/passwordsync/lhpwic.cpp,641): about to login...
(../../../src/wps/passwordsync/lhpwic.cpp,645): Login failed error code : -2147467259. Disassembing client
(../../../src/wps/passwordsync/lhpwic.cpp,665): Exit: GetClient
(../../../src/wps/passwordsync/lhpwic.cpp,935): Error getting our soap, bailing out.
even if i gave wrong username and password it giving me the same error
Can someone help on this

Managed System configuration for SAP NW Java system in Solution Manager 7.1 SP10

Hi All,
I am doing Managed system configuration for my SAP NW 7.01 Java system and getting below error in step 6 create users SAPSUPPORT & SM_COLL_SID.
"An unexpected error occured. An error occured while processing the UME command READ_USER from agent <hostname> : Server returned: 302 Found "
I have checked my DAA as well as host agents are up and running fine. My Solution Manager is 7.1SP10.
Please suggest.
Regards,
Manish

Manish,
Which UME you are using? portal/ABAP/LDAP
Are you using the SOLMAN_ADMIN user while configuring.
Also check the below forum.
https://scn.sap.com/thread/1167282
Regards,
Raja. G

Sun Java System Web Proxy Server (4.0.2) - manage server will not start

In short here's the scenario and main problem.
a. Proxy admin server start - no problem
b. Create a new manage server (no proxying - just testing it) using different port. It just won't start. No logs produced either.
Here's the server.xml for the new manage server.
<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE SERVER PUBLIC "-//Sun Microsystems Inc.//DTD Sun Java System Web Proxy Server 4.0//EN" "file:///E:/Sun/ProxyServer40/bin/proxy/dtds/sun-web-proxy-server_4_0.dtd">
<SERVER>
    <PROPERTY name="accesslog" value="E:/Sun/ProxyServer40/proxy-server3/logs/access"/>
    <LS id="ls1" port="8083" servername="cbaob-b3-csddb1.adp1.cibc.pte"/>
    <MIME id="mime1" file="mime.types"/>
    <ACLFILE id="acl1" file="E:/Sun/ProxyServer40/httpacl/generated.proxy-server3.acl"/>
    <USERDB id="default"/>
    <FILECACHE enabled="true" maxage="30" mediumfilesizelimit="537600" mediumfilespace="10485760" smallfilesizelimit="2048" smallfilespace="1048576" transmitfile="false" maxfiles="1024" hashinitsize="0"/>
    <CACHE enabled="true" cachecapacity="2000" cachedir="E:/Sun/ProxyServer40/proxy-server3/cache">
        <PARTITION partitionname="part1" partitiondir="E:/Sun/ProxyServer40/proxy-server3/cache" maxsize="100" minspace="5" enabled="true"/>
<GC enabled="true" gchimargin="80" gclomargin="70" gcleavefsfull="60" gcextramargin="30"/>
    </CACHE>
    <LOG file="E:/Sun/ProxyServer40/proxy-server3/logs/errors" loglevel="finest"/>
</SERVER>
Nothing seems to be wrong with this. The XML format follows the specified DTD.
Would appreciate any help.
Thanks.

Thanks for your reply. Yes. This is really odd.
Anyway to make the whole story short, i uninstall this proxy server 4.0.2 on this server (say server1) and try to reinstall a new proxy 4.0.13 but having odd problem (i have administration rights)
Here it goes.
a. CMD java -version is 1.4.2_XX
b. Double click the proxy 4.0.13 setup.exe - nothing happen.
c. CMD setup --javahome c:\jdk1.6_XX - nothing happen
Here retrying.
a. Login to server2 and map conection to server1
b. Double click the proxy 4.0.13 setup.exe on server1 (while on server2) - setup.exe runs. This proves the proxy setup.exe on server1 is good.
c. Make a copy of proxy 4.0.13 on server2
d. Login to server1 and map connection to server2
e. Double click the proxy 4.0.13 setup.exe on server2 (while on server1) - setup.exe did not run.
Both servers are on the same domain and i'm using same ID to access both servers
Again, no logs on the windows events (security, application, system)
This is becoming mind a boggling mystery.
Any idea what's going on?
Thanks.

Sun Java System Portal Server 7.2 download Link

Hi,
I want to download Sun Java System Portal Server 7.2 .
Could anyone pls provide me the download link.
I checked this url
https://portal.dev.java.net/public/Downloads.html
but could not able to found.
Sujan

Hey,
maybe anybody has an idea if there's any possibility to get the "Sun Java System Portal Server 7.2".
The download links to the portal server 7.1 and portal server 7.2 on the website are down.

Symbolic link error when exporting during heterogeneous system copy

My enviroment is ECC6.0/Oracle 10.2.0.2/SUN Solaris 10 . I'm performing heterogeneous system copy to Oracle 10.2.0.2/AIX 6.1 enviroment.
I've succesfully exported & imported two systems ie DEV & Solutin Manager , but PRD system has an OS problem with symbolic links ie Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS
I want to export both ABAP & JAVA stack but only the java stack is getting picked.
Below is part of the resultng sapinst.log
Thanks
INFO 2011-09-05 10:44:30.573
Execute step verifyJavaHome of component |NW_Export|ind|ind|ind|ind|0|0|NW_getJavaHome|ind|ind|ind|ind|2|0
INFO[E] 2011-09-05 10:44:33.851
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/._), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:44:33.851
FSL-02061 Link /._ is invalid: Unable to link a link to itself.
INFO 2011-09-05 10:44:46.118
Execution of the command "/usr/j2sdk1.4.2_09/bin/java -classpath /tmp/sapinst_exe.29247.1315208256/JAR/ins-j2ee.jar com.sap.ins.j2ee.GetSystemProperty" finished with return code 0. Output: #
#Mon Sep 05 10:44:45 EAT 2011
java.runtime.name=Java(TM) 2 Runtime Environment, Standard Edition
sun.boot.library.path=/usr/j2sdk1.4.2_09/jre/lib/sparc
java.vm.version=1.4.2_09-b05
java.vm.vendor=Sun Microsystems Inc.
java.vendor.url=http\://java.sun.com/
path.separator=\:
java.vm.name=Java HotSpot(TM) Client VM
file.encoding.pkg=sun.io
user.country=US
sun.os.patch.level=unknown
java.vm.specification.name=Java Virtual Machine Specification
user.dir=/oracle/PRD/INSTDIR/sapinst_dir
java.runtime.version=1.4.2_09-b05
java.awt.graphicsenv=sun.awt.X11GraphicsEnvironment
java.endorsed.dirs=/usr/j2sdk1.4.2_09/jre/lib/endorsed
os.arch=sparc
java.io.tmpdir=/var/tmp/
line.separator=\n
java.vm.specification.vendor=Sun Microsystems Inc.
os.name=SunOS
sun.java2d.fontpath=
java.library.path=/usr/j2sdk1.4.2_09/jre/lib/sparc/client\:/usr/j2sdk1.4.2_09/jre/lib/sparc\:/usr/j2sdk1.4.2_09/jre/../lib/sparc\:/tmp/sapinst_exe.29247.1315208256\:/usr/openwin/lib\:/usr/lib
java.specification.name=Java Platform API Specification
java.class.version=48.0
java.util.prefs.PreferencesFactory=java.util.prefs.FileSystemPreferencesFactory
os.version=5.10
user.home=/
user.timezone=Africa/Nairobi
java.awt.printerjob=sun.print.PSPrinterJob
file.encoding=ISO8859-1
java.specification.version=1.4
java.class.path=/tmp/sapinst_exe.29247.1315208256/JAR/ins-j2ee.jar
user.name=root
java.vm.specification.version=1.0
java.home=/usr/j2sdk1.4.2_09/jre
sun.arch.data.model=32
user.language=en
java.specification.vendor=Sun Microsystems Inc.
java.vm.info=mixed mode
java.version=1.4.2_09
java.ext.dirs=/usr/j2sdk1.4.2_09/jre/lib/ext
sun.boot.class.path=/usr/j2sdk1.4.2_09/jre/lib/rt.jar\:/usr/j2sdk1.4.2_09/jre/lib/i18n.jar\:/usr/j2sdk1.4.2_09/jre/lib/sunrsasign.jar\:/usr/j2sdk1.4.2_09/jre/lib/jsse.jar\:/usr/j2sdk1.4.2_09/jre/lib/jce.jar\:/usr/j2sdk1.4.2_09/jre/lib/charsets.jar\:/usr/j2sdk1.4.2_09/jre/classes
java.vendor=Sun Microsystems Inc.
file.separator=/
java.vendor.url.bug=http\://java.sun.com/cgi-bin/bugreport.cgi
sun.io.unicode.encoding=UnicodeBig
sun.cpu.endian=big
sun.cpu.isalist=sparcv9vis2 sparcv9vis sparcv9 sparcv8plusvis2 sparcv8plusvis sparcv8plus sparcv8 sparcv8-fsmuld sparcv7 sparc
INFO 2011-09-05 10:44:47.076
Execution of the command "/usr/j2sdk1.4.2_09/bin/java -classpath /tmp/sapinst_exe.29247.1315208256/JAR/ins-j2ee.jar:/tmp/sapinst_exe.29247.1315208256/JAR/sapxmltoolkit.jar -d64 com.sap.ins.j2ee.TestClassLoader" finished with return code 0. Output: CORRECT
INFO 2011-09-05 10:44:47.572
Execute step verifyPolicy of component |NW_Export|ind|ind|ind|ind|0|0|NW_getJavaHome|ind|ind|ind|ind|2|0
INFO 2011-09-05 10:44:47.715
Execute step setNWOption of component |NW_Export|ind|ind|ind|ind|0|0|NW_getJavaHome|ind|ind|ind|ind|2|0
WARNING 2011-09-05 10:44:47.944
Could not determine a valid JAVA_HOME directory from the environment.
INFO 2011-09-05 10:44:48.86
Execute step assignUsersToSapinstGroup of component |NW_Export|ind|ind|ind|ind|0|0
INFO 2011-09-05 10:44:48.890
Account sapinst already exists.
INFO 2011-09-05 10:44:48.894
Account prdadm already exists.
INFO 2011-09-05 10:44:48.917
Account oraprd already exists.
INFO 2011-09-05 10:44:49.73
Execute step useDatabaseMethod of component |NW_Export|ind|ind|ind|ind|0|0
INFO 2011-09-05 10:44:49.217
Execute step setDatabaseMethodOra of component |NW_Export|ind|ind|ind|ind|0|0
INFO 2011-09-05 10:44:49.341
Execute step setDatabaseMethodDB6 of component |NW_Export|ind|ind|ind|ind|0|0
INFO 2011-09-05 10:44:49.480
Execute step mainExportParameters of component |NW_Export|ind|ind|ind|ind|0|0
INFO[E] 2011-09-05 10:44:52.251
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/._), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:44:52.252
FSL-02061 Link /._ is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.760
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/cntrl), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.761
FSL-02061 Link /oracle/PRD/cntrl is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.762
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/._), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.762
FSL-02061 Link /oracle/PRD/._ is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.763
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/sdubhibq), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.764
FSL-02061 Link /oracle/PRD/sdubhibq is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.765
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/sduccayx), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.765
FSL-02061 Link /oracle/PRD/sduccayx is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.766
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/inventory), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.767
FSL-02061 Link /oracle/PRD/inventory is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.768
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/OPatch), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.768
FSL-02061 Link /oracle/PRD/OPatch is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.769
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/assistants), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.770
FSL-02061 Link /oracle/PRD/assistants is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.771
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/bin), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.772
FSL-02061 Link /oracle/PRD/bin is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.773
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/clone), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.773
FSL-02061 Link /oracle/PRD/clone is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.774
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/crs), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.775
FSL-02061 Link /oracle/PRD/crs is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.776
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/css), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.777
FSL-02061 Link /oracle/PRD/css is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.778
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/ctx), line (346) in file (syuxclink.cpp).
INFO[E] 2011-09-05 10:45:01.778
FSL-02061 Link /oracle/PRD/ctx is invalid: Unable to link a link to itself.
INFO[E] 2011-09-05 10:45:01.779
FSL-00001 System call failed. Error 90 (Number of symbolic links encountered during path name traversal exceeds MAXSYMLINKS) in execution of system call 'realpath' with parameter (/oracle/PRD/dbs), line (346) in file (syuxclink.cpp).

Hi,
In PRD system, u might have craeted many symbolic links in /oracle/PRD fileystem . This should be avoided. Symbolic link should not be created in /oracle/PRD ...
Please check why symbolic links are created and get help from System Operation team . Please becareful to unlink symbolic links that are created by non-SAP. Make sure to perform full offline backup .
Please get the help from Unix System Operation team. Also it does not makes any sense to increase value of Unix parameter for maximum symbolic links.
Regards
APR

Problem of authorization in java system

Hi all
I have a problem of authorization.
I have two sap system: SAP ERP, SAP Netweaver 2004s (only java).
In my sap ERP I have configured some web services.
Now I would use those web services from my Netweaver , so I execute those step:
From sap erp:
Transaction soamanagerlogon on sap erp  u201CBusiness Administrationu201D Tab Page  u201Cweb Service Administrationu201D link choose my WS  link u201COpen Web Service navigator for selected bindingu201D now appear a login screen.
I have created a user u201Cprovau201D with role and group everyone in the java system.
When I try to login with user u201Cprovau201D the error message u201CYou donu2019t have authorization u2026u201D appear
I Would know if exist something to Know the authorization to use that service to add at the user u201Cpippou201D.
Thank you for collaboration
Best regards
giovanni

HI Thulasi
thank you for your response.
I opened my browser on http://<my ip>:50000/index.html of the java system, I have choose "User Management" and
selected my user but I didn't find the role "WSnavigator" . The roles that I have in the java system are:
Administrator
CAFAdmin
CAFDeveloper
CAFUIAdmin
Everyone
SAP_ARCH_SUPERADMIN
SAP_ARCH_XMLDAS_VIEW
SAP_JAVA_NWADMIN_CENTRAL
SAP_JAVA_NWADMIN_CENTRAL_READONLY
SAP_JAVA_NWADMIN_LOCAL
SAP_JAVA_NWADMIN_LOCAL_READONLY
SAP_JAVA_SUPPORT
Must I choose this role from visual administrator?
Thank you for collaboration.
Best regards
giovanni

Sun Java System Portal Server 6.0 FAQs

Sun Java System Portal Server 6.0 FAQs.
Author: Sanjeev Agarwal
Q. How to connect to external URLs from Sun ONE Portal Server? I want to use URL Scrapper for some of external sites/URLs.
Ans:
You can connect to external URLs if you have a Proxy Server running.
If you are using Web Server addition of Sun ONE the Portal Server then
go to /opt/SUNWam/servers/https-hostname.domainname/config/ dir
In the jvm12.conf file, enter the followings:
http.proxyHost=proxyservername.domainname
http.proxyPort=80 (or the appropriate proxy server port number)
https.proxyHost=proxyservername.domainname
https.proxyPort=80 (or the appropriate proxy server port number)
If you are using Sun ONE AppServer addition of Sun ONE Portal Server then
go to /var/opt/SUNWappserver/domains/domain1/<server-instance>/config dir
In the server.xml file, enter the followings:
<jvm-options>-Dhttp.proxyHost=proxyservername.domainname </jvm-options>
<jvm-options>-Dhttp.proxyPort=80 (or the appropriate proxy server port number) </jvm-options>
<jvm-options>-Dhttps.proxyHost=proxyservername.domainname </jvm-options>
<jvm-options>-Dhttps.proxyPort=80 (or the appropriate proxy server port number) </jvm-options>
After this modification restart the server.
Q. Explain all the processes (solaris 8 and S1 Portal Server 6.0) which runs when I start the Sun ONE Portal Server.
Ans.
These are the processes that a running Portal Server installation (Sun ONE WebServer addition, without SRAP) generally has by default.
1. Directory server processes:
- ns-slapd (LDAP server instance)
- uxwdog (admin server process) (parent process)
--- ns-httpd
----- ns-httpd
2. Auth Helper processes:
- doUnix
3. Web-Server/Identity-Server/Portal-Server processes:
As the Portal Server and Identity Server runs as web application on the Web Server, so they share the same JVM and processes.
- uxwdog (web server admin server process) (parent process)
--- ns-httpd
----- ns-httpd
(for each web server instance)
- uxwdog (parent process)
- ns-httpd
- ns-httpd
or (in case of MaxProc=n )
- uxwdog (parent process)
--- ns-httpd
----- ns-httpd
----- ns-httpd
----- n
Q. I have created a custom Provider but getting this error when I access the desktop, what do I do?
> error in the desktop.debug file:
> ERROR: DesktopServlet.handleException()
> java.util.MissingResourceException: Can't find bundle for base name CustomTabContainerProvider,
Ans:
It needs a resource bundle for the custom provider. You need to create a file CustomTabContainerProvider.properties (as mentioned in the error message) and put it into the /etc/opt/desktop/classes directory. If you are not using any properties defined in this resource file then it can be a empty file. Have a look on the properties files that bundled containerProviders uses in dir <portal-install-dir>/SUNWps/web-apps/https-<host.domain>/portal/WEB-INF/classes.
As you are extending JSPTabContainerProvider class, you can just copy the file JSPTabContainerProvider.properties from the above directory after renaming it to the <defined-provider-name>.properties (in your case CustomTabContainerProvider.properties) and move it into /etc/opt/desktop/classes directory.
Q. what is actually multiple instances of Portal Server means?
Ans:
Multiple instance of Portal Server means, you will have more http listeners for the same desktop contents and the same identity profiles stored in a single Directory Server which all the instances share.
In simple words you can have your Portal Server listening on different http ports, but uses same configuration, desktop and identities.
It can help you to share the load for Portal Server http requests. The alternate methods are to create more web server virtual server processes (maxProc=n, but in this case the listening port will be 1 only) or use some hardware load balancer.
You can achieve more from multiple instances if you have a multi level organization, you can change the look and feel of all the instances, images, services, components and can assign each instance to different organization or sub-organization.
Q. How do I check the availability of the Sun ONE Portal Server/Identity Server services.
Ans:
You can check the availability of Sun ONE Identity Server services from following urls.
http://<host.domainname>:<port>/amserver/sessionservice
http://<host.domainname>:<port>/amserver/loggingservice
To know the availability of components of Sun ONE Portal Server like Desktop/providers/Rewriter/Netmail you have to login into desktop. These are not services, but just the programming identities which will work if your Web Server and Identity Server is running.
Just go to URL http://<server>:<port>/portal/dt , if it shows up that means your portal server is fine, and these entities will work for sure.
Q. I am able to add the yahoo channels to existing users. But I am getting the weather for London not for local New Jersey. My language pref is to en|en_US and also the server is the default U.S server and not europe. How do I add the cities I want to see on weather channel?
Ans:
A Portal user himself (after login) can select what cities he want to see in weather channel.
Steps:
- click the edit button of weather channel
- click on the area you belong to from Available Sections
- select the cities from Available Cities select box and add them to Your Choices.
- click finished from select city page and then again click finished from select area page.
It will come back to the Portal Desktop and you will see all the cities you have selected in the weather channel.
Q. How to use getContent() method to use in custom jsp providers (developed by ourselves) so that it can be used to retrieve a jsp page. I have already placed the JSP file in the directory structure /etc/opt/SUNWps/desktop/default/channel_dir. But still the jsp is not being displayed.
Ans:
You don't have to do anything in the custom JSPProvider's getContent method except the call { return super.getContent(request,response); } . If all you want is just to show your jsp, then create a channel from the default JSPProvider, and edit the property contentPage of that channel from samplecontent.jsp to your jsp name, save the changes and login again. You should see your JSP.
Q. I want to remove all the buttons (help/edit etc.) from all the channels/one particular channel in my desktop?
Ans:
You can hide any buttons you want from any channel.
These steps show how to hide all the buttons.
1. Create a channel say "myNetlet" from netlet provider.
2. Set the channel title to "myNetlet"
3. Go to the dir /etc/opt/SUNWps/desktop/default/JSPTableContainerProvider and edit the file providerCommands.jsp, and modify the last line :
from :
<%=minMaximizeCommand%><%=helpCommand%><%=editCommand%><%=detachAtachCommand%><%=removeCommand%>
to:
<% if ( !(title.equals("myNetlet"))){ %><%=minMaximizeCommand%><%=helpCommand%><%=editCommand%><%=detachAtachCommand%><%=removeCommand%><% } %>
4. Clean the dir mentioned below which contains compiled JSPs. /var/opt/SUNWps/https-<host>.<domain>/portal/tmp/_jsps/_etc/_opt/_SUNWps/_desktop/_default_en/_JSPTableContainerProvider/_html and reload the page.
Relogin, and you would not see any buttons on "myNetlet" channel. You can customize this logic as per your needs.
Q. How to change the title of SampleJSP Channel. I tried to change the channel properties title value via iplanet directory Server Access Management GUI. But it is not getting reflected.
Ans:
Through Admin console you can change the channel property "title", and as soon as you refresh the page (Shift reload) of relogin in the portal it get's reflected.
The reason to this problem may be due to the channel property "title" is having "propagate" value as false and you are setting the channel title in the org level display profile not in the user level display profile.
So better you change the channel name in user's display profile also.
For this login into admin console and go to :
- View: "User Management" -> click on organization -> Show: Users
- click on the blue arrow of that user
- click on Edit in section Desktop (this will open a window)
- then change the channel properties same way you do for Organization display profile.
Q. Login Problem with SunOne Portal 6.0.
I was able to download and install sun one portal 6 on Solaris 8. The sample portal page came up after installation. However whenever I try to login to the Login channel with "amadmin" and the passphrase I used during installation, it takes me to another page - iPlanet/LDAP authentication page. Here I tried using the same login, but fails every time (the same login page appears). The url that shows is "http://<hostname>/amserver/login?module=dproadmin&goto=/amconsole/base/AMAdminFrame"
I tried registering myself as a new user as well. This too fails.
Ans:
Make sure you are giving fully qualifying the hostname in the url which invoked the desktop. This in fact is documented in the administration documentation. If the hostname is not fully-qualified, the login page goes into an endless mode. Again, the correct url is "http://<fully-qualified-hostname>/portal". Once you get to the desktop, the login and the new user registration works.
Q. How to send variables/parameters from 1 app to another app deployed on Sun ONE Portal Server? It may be the apps or different JSPs of JSP provider channel.
How to achieve inter channel communication in Sun ONE Portal Server?
Ans:
You can use servlet context object or session, or may be the request object itself to store the information from one channel and use that in another channel. The use of either of these 3 approaches may depend on your requirements. Using session, the information will be available to that user's channels only, using request, the information will be available for that user and that request only and by using ServletContext you can share the information across users and sessions. You can obtain DesktopServlet's ServletContext object inside JSP/JSPProvider.
Q. I am trying to modify the default desktop JSPs in TableContainerProvider and TabCotntainerProvider dirs, but it is not picking my modified JSPs ? what do I do?
Ans:
One easiest way to 100% ensure that it updates all your new jsp pages is to remove all the compiled jsps so that with next request the Sun ONE Portal Server compiles all the jsps and will make sure that your modification will be taken care of in next request.
Go to /var/opt/SUNWps/https-<instance_name>/portal/tmp/_jsp/_etc/_opt/_SUNWps/_desktop/_default_<locale>/ and remove everything. and access the Portal server, it will be little slow as it has to compile all the JSPs again. Here you will find directories in the name of Containers and Channels, so if you are modifying any particular Container/Channel you can just delete that only. This approach can help a lot during development time.
Q. What is the location of compiled JSPs in Sun ONE portal Server and what servlet spec does it supports?
Ans: The Portal server 6.0 runs on Sun ONE Web Server 6.0 sp2, which supports only jdk 1.3 and servlet spec 2.2 only. The Sun ONE Portal Server keeps the compiled jsps of desktop and channels in : /var/opt/SUNWps/https-<instance_name>/portal/tmp/_jsp/_etc/_opt/_SUNWps/_desktop/_default_<locale>/ dir as per the channels/container names.
Servlet 2.3 is supported if you run the Portal Server edition that runs on Sun ONE Application Server 7.0.
Q. How do I change jdk for Sun ONE Portal Server to another jdk? I want to change the JDK of only one of my Portal Server instances, is it possible? how?
Ans:
Yes you can achieve both.
A. To change the JDK for all the server instances:
Open <portal-install-dir>/SUNWam/servers/https-admserv/start-jvm file and modify the first line
NSES_JDK=/usr/java_1.3.1_04; export NSES_JDK
to
NSES_JDK=<your-jdk-location> ; export NSES_JDK
then open <portal-install-dir>/SUNWam/servers/https-<instance-name>/config/jvm12.conf file of all the server instances and add a line
jvm.option=-server after the first line
B. To change the JDK for a particular server instances:
Make a another copy of the start-jvm file rename it and modify the jdk location in it as mentioned above.
Open the start script from <portal-install-dir>/SUNWam/servers/https-<instance-name> dir and modify these lines :
if test -r {SERVER_ROOT}/https-admserv/start-*
then
for STARTSCRIPT in {SERVER_ROOT}/https-admserv/start-*
modify this to
if test -r {SERVER_ROOT}/https-admserv/<changed_name_of_start-jvm-file>
then
for STARTSCRIPT in {SERVER_ROOT}/https-admserv/<changed_name_of_start-jvm-file>
Note: As Portal Server 6.0 uses Web server 6.0 sp2, jdk 1.4 is not supported.
Q. How do I create a custom login page or a link, which will just log me into the portal server.
Ans:
You can create a custom page in your jsp page, just add this portion of html into your web page :
<FORM action="http://<server>:<port>/amserver/login?module=<login-module>&page=1" method=post name=login_form2 target=_top>
Login page using <login-module><br>
<P>Enter UserId<BR><INPUT name=TOKEN0 size=22></P>
<P>Enter Password<BR><INPUT name=TOKEN1 size=22 type=password></P>
<P><INPUT name=Submit type=submit value=Submit> </P>
</FORM>
The <login-module> can be LDAP or Unix or Membership which ever you have enabled. Or instead of this you can create a link. For example for LDAP auth module :
"<a href="http://<server>:<port>/amserver/login?module=LDAP&page=1&TOKEN0=user&TOKEN1=password" target=_top> Login into Portal </a>"
where user and password are the user credential for the portal server.
Q. Can I install a portal server pointing to another Identity server? I want to install few postal servers (on different machines) pointing to same identity server, is it possible?
Ans:
No, right now the Sun ONE Portal Server is tightly integrated with Sun ONE Identity Server so you can't just install only Sun ONE Portal Server and point it to another Sun ONE Identity Server. You can have a common Directory server if you want.
Q. I have an application which takes input in from anonymous user and then to complete the request the user than has to login. I am having problem in passing the taken input from anonymous page to logged in user. all the request parameters are lost when I log in. How do i get the request parameters after I log in
Ans:
You can create a custom login page and submit the form to "/amserver/login" with a hidden parameter "goto" through which you basically specify which url to go after you log in. So you can use this mechanism to create a query string with all your request parameters you want to pass after login. For example:
You can create a jsp which take few inputs from user and to complete the request you have to login so it posts the input form to a login jsp and stores the parameters taken from user in a hidden field (goto) :
<FORM action="/amserver/login?module=LDAP&page=1" method=post name=login_form2 target=_top>
Login page using LDAP<br>
<P>Enter UserId<BR><INPUT name=TOKEN0 size=22></P>
<P>Enter Password<BR><INPUT name=TOKEN1 size=22 type=password></P>
<INPUT TYPE=HIDDEN NAME="goto" VALUE="/portal/dt?param1=<%=request.getParameter("param1")%>&param2=<%=request.getParameter("param2")%>">
<P><INPUT name=Submit type=submit value=Submit> </P>
</FORM>
After you login through this page both the param1 and param 2 will be available in the request object after you login and you can retrieve them in your application or jsp.
Q. I have few System.out.println in my jsp which i am using in my JSP provider channel, but when I look at the portal server's /var/opt/SUNWam/debug/desktop.debug file, none are there. I looked at the web server's access and error logs too, but it is not there also. Can somebody tell me how do it get those ? Do we have any other mechanism to put debug logs ?
Ans
By default the binary which web server runs is uxwdog which eats up System.out.println output. If you want to see the System.out.println then you need to change the product binary from the start script of the portal server instance.
- Go to <portal-install-dir>/SUNWam/servers/https-<instance-name> and open the start script
- Change the PRODUCT_BIN=uxwdog to PRODUCT_BIN=ns-httpd , save the file
- Run the script ./start to start the portal server
Note : with ns-httpd ON the server will not leave that shell, and in the same window/shell you will be able to see all your System.out.println statements. To close the server you have to kill the server process with "kill -9 pids" command
Alternate way is to use api inside your application or jsp:
<%@page import="com.sun.portal.providers.jsp.JSPProvider, com.sun.portal.providers.*, com.sun.portal.providers.containers.*, com.sun.portal.providers.context.*" %>
<% JSPProvider p=(JSPProvider)pageContext.getAttribute("JSPProvider");
ProviderContext pc = p.getProviderContext(); %>
<%-- after that you can use these lines any where in your jsp --%>
<%
pc.debugError("your error msg");
pc.debugMessage("your msg");
pc.debugWarning("your warning msg");
%>
The particular mgs will be shwon in /var/opt/SUNWam/debug/desktop.debug file as per your "debugLevel" parameter setting in /etc/opt/SUNWps/desktop/desktopconfig.properties file. By default the debugLevel is set to error so only pc.debugError("error msg") will be shown.
Q. Multipart form (file upload) processing in providers? Is it supported
Ans:
The Sun ONE Portal Server's DesktopServlet does not have the ability to process a request with the content encoding type of multipart/form-data. DesktopServlet does not pass the input stream for the request on to the Provider.
To accomplish handling of multipart/form-data type requests, it is necessary to create a companion servlet or JSP that process the multipart/form-data. This servlet can then pass control back to the Portal channel. The data from the file can be shared between the servlet and the provider by using static Java members or by storing the data in a back-end database and then passing a reference to the data over to the provider.
Q. After installing the Portal Server I am trying to login as admin, but it is failing and coming back to login page every time. How do I login?
Ans:
The Default Admin user is 'amadmin' and the password is the PASSPHRASE you give during Portal Server installation. Try login using these credentials.
Also in the browser give the complete URL for the Portal Server like : Http://<myhost>.<mydomain>:<port>/amserver/login or Http://<myhost>.<mydomain>:<port>/amconsole. You can't login into portal server's IDSAME console by giving IP Address or just the hostname, also your machine should be listed in the DNS server so that it can resolve the name.
Q. I installed Sun ONE Portal Server 6.0 some time back, and now I want to know all the installation parameters and user/passwords for whole portal installation. How do I do that?
Ans:
The Default Admin user is 'amadmin' and the password is the PASSPHRASE you give during Portal Server installation. Also in the browser give the complete URL for the Portal Server like : Http://<myhost>.<mydomain>:<port>/amserver/login or Http://<myhost>.<mydomain>:<port>/amconsole. You can't login into portal server's IDSAME console by giving IP Address or just the hostname, also your machine should be listed in the DNS server so that it can resolve the name.
In case you have forgotten the port numbers and PASSPHRASE that you give during installation, you still can see all the information for each component of your Portal Server Installation. The Portal server and it's components like Directory Server, Web Server and IDSAME are installed as Solaris package so the system has all the information for these packages.
Portal Server : See file /var/sadm/pkg/SUNWps/pkginfo
Directory Server : See files /var/sadm/pkg/SUNWamds/pkginfo and /var/sadm/pkg/SUNWamdsc/pkginfo
Web Server : See file /var/sadm/pkg/SUNWamws/pkginfo
Identity Server : See file /var/sadm/pkg/SUNWamsam/pkginfo
Note: In any case you should never edit/modify these files.
Q. Controlling the display of the help (?) button.
Where are the links/image elements defined for the help/edit/minimize buttons? the leafWrapper.jsp pulls the hashtable out of the HttpRequest, and that hashtable is being used by providerCommands.jsp:
Hashtable commands = (Hashtable)request.getAttribute("provider_cmds");
Any idea where this is being set?
Ans:
- You can remove the help/edit button of any channel by adding the line into the Channel's properties by editing the Xml of display profile in the admin console.
<String name="helpURL" value="" advanced="false" merge="replace" lock="false" propagate="true"/>
<Boolean name="isEditable" value="false" advanced="false" merge="replace" lock="false" propagate="true"/>
The Attribute 'provider_cmds' is set into /etc/opt/SUNWps/desktop/default/JSPTableContainerProvider/tablecolumn.jsp :
<dttable:getProviderCommand id="provider_cmds" scope="request" />, and after that only the leafwrapper.jsp is included, but the Hashtable is generated by a class com.sun.portal.providers.util.ProviderCommands.java and made available through taglib classes. So you can't change the generated contents/string in the Hashtable.
But you can change the default 'alt' text displayed and the images linked to the help/edit icons. As this modification is at Provider level, it will change the icons for all the channels in the desktop.
Please see the file:
/opt/SUNWps/web-apps/https-<host>.<domain>/portal/WEB-INF/classes/JSPTABLEContainerProvider.properties.
Here you will find the mapping. The image location are given from the context root of portal server which is by default : /opt/SUNWps/web-apps/https-<host>.<domain>/portal.
Q. I have a number of web applications needed to integrate to portal server. Any pointers or tips of what my option is?
Ans:
You can very well integrate all your web application with Portal server. Portal Server 6.0 has web container same as Sun ONE web server 6.0 Sp2, which runs on Jdk-1.3.
If your web applications are just Servlets/Jsps then you can very well port them on Portal server's webserver which supports war module deployment. (infect for Web server the Portal server and Identity server is like a war module.)
There can be two possibilities in this case, either you put the whole of your application on portal server and make the link available into the desktop via 'Application Provider Channels' or you can create a client to your web application into portal server.
If your web application is on Sun ONE Application server 7.0 and needs authentication, you can also have SSO. If you just want to show the link of your web application into desktop then you can either use URL Scrapper to show the first page of your web application or use Bookmark channel to provide just the url.
The easiest way to make a client of your web application is to use JSP Channel using JSPProvider and put your logic into the samplecontents.jsp file or you can create your own custom Provider extending JSPProvider. There can be a lot of different configurations, depending on the web application you want to integrate and your needs
Q. I removed few channels from the org level display profile but still they are coming to the desktop of users, I had accessed the desktop before. why?
Ans:
If you still see any channel after you remove it from the display profile at organization lever, that means you have to edit the user's display profile. So go to admin console and select User from Show: menu and click on the blue arrow near the user. In the right frame under the 'Desktop' category click on the Edit link (right side). This will open user's display profile in a window. Now edit it as per your requirements.

Unfortunately Web Server 6.0SP2 is no longer available for download.
If you must use Web Server 6.0, you should use the most current Service Pack. It is backward compatible and contains many performance and security fixes.

Reg : Doubts on Knowledge Modules

hi all,
Please give brief idea about knowledge modules. please dont give links .
KNOWLEDGE MODULES
REVERSE ENGINEERING
LKM
CKM
IKM
JKM
SKM
Thanks a lot in advance ,
-Chinnu.

LKM - Loading
The LKM - Loading Knowledge Modules - load (or extract data) from one data server to another.
They are named as follows:
LKM <source server technology> to <target server technology> (<module specificity>)
JKM - Journalizing
The JKM - Journalizing Knowledge Modules - setup journalizing on a datastore in a data model.
They are named as follows:
JKM <technology to journalize>
Note: Journalizing uses triggers and views. Therefore technologies that do not support these functions generally do not have an associated JKM.
IKM - Integration
The IKM - Integration Knowledge Modules - integrate data in a target data server from a Staging Area. Frequently, the Staging Area and target space are on the same data server. The IKM can manage options such as data insertion (Append), or update (Incremental Update), etc.
They are named as follows:
IKM <Staging Area data server technology> to <target data server technology> <option managed in the module> (<module specificity>)
IKM <Staging Area and target data server technology> <option managed in the module> (<module specificity>)
Note: The option managed by the module frequently indicate the more complex option supported in this knowledge module. For instance, a module Incremental Update (update) should also be able to manage the option append, which is data insertion, and suppression of data in the target..
CKM - Check
The CKM - Check Knowledge Modules - manage the data quality and cleansing, on static data and on data flows.
They are named as follows:
CKM <Checked Technology> (<module specificity>)
RKM - Reverse-engineering
The RKM - Reverse Knowledge Module - reverse-engineer a data model stored in a given technology. As default, the standard reverse allows to reverse all the information and meta-data in most models. It is required for certain technologies (files for instance) to use a personalized reverse and therefore a RKM. They are named specifically.
SKM - Services
SKM (Service Knowledge Modules) are used to generate the code required for creating data services. This code (typically Java) can be automatically compiled and deployed to a web service container.
You can get more information about various KMs from
http://www.oracle.com/technology/products/oracle-data-integrator/10.1.3/htdocs/documentation/oracledi_km_reference.pdf
There is no escape from URL :)

Can Central System administration be configured for JAVA systems?

I know, we can configure Central system administration (DSWP -> Solution -> Operations Setup) for ABAP and ABAP+JAVA systems.
Can some one tell me, can it be configured for JAVA systems like Portal?
Thanks
Aditya

Hello Aditya
Unfortunatelly Java only systems are not supported by CSA in EHP1. The CSA infrastructure is currently being overhauled and as a result of this, pure Java systems will also be covered starting with the next release of SAP Solution MAnager (SAP Solution Manager 7.1) The availability of this next release will be this year, but I am not yet sure when exactly. You can check further info in www.service.sap.com/solutionmanager -> in the last line of this page there is a link to get detail about this version Ramp-Up.

KPro vs Knowledge Management What is the difference ?

Hi All, I have read up on the ECM on this website, yet i don't really understand what is the difference between Knowledge Management and Knowledge Provider. Is it 2 different ways of implementing the same thing ?
If anyone can help with an example would be greatly appreciated. Thanks.

Hi,
Please find required difference
SAP Knowledge Provider(KPro)
=============================
The SAP Knowledge Provider (KPro) is a cross-application and media-neutral information
technology infrastructure within the R/3 Basis System. The modular structure and openness on
which KPro is based is reflected in its modular services and clearly defined interfaces. Its
extensive flexibility means that KPro can be used to process the widest variety of information
types within and relating to documents and document-like objects. For example, administration
and index data, as well as pure content.
Applications that use the SAP Knowledge Provider involve various end users, who in turn have
different requirements. There is therefore no universal interface for accessing KPro services
regarding the following points:
Specific knowledge management functions for end users
Specific terminology for describing the document-like objects within the context of the
individual application
Specific design of work process flows
Specific design of user interfaces
SAP Knowledge Management
=========================
With its Knowledge Management capabilities, SAP NetWeaveru2122 provides a central, role-specific point of entry to unstructured information from various data sources in the portal. This unstructured information can exist in different formats such as text documents, presentations, or HTML files. Workers in an organization can access information from different source such as file servers, their intranet, or the World Wide Web. A generic framework integrates these data sources and provides access to the information contained in them through the portal.
Knowledge Management functions support you in structuring information and making it available to the correct target audience. These functions include search, classification, and subscriptions (see below): You can use these functions on all content of integrated data sources, as long as the technical conditions are met.
Knowledge Management is a part of SAP Enterprise Portal. The entire functional scope and configuration of Knowledge Management are available in portal iViews.
Functions such as discussions, feedback, and sending items from KM folders by e-mail are integrated into Knowledge Management and enable you to work across role and department borders. In addition, Knowledge Management functions are used in Collaboration, for example, to store documents in virtual rooms.
Knowledge Management supports the SAP NetWeaveru2122 scenario Information Broadcasting. You can use the BEx Broadcaster and Knowledge Management to make business information from SAP NetWeaver Business Intelligence available to a wide spectrum of users in the portal. You can store the following BI objects in KM folders:
· Documents with precalculated reports.
· Links to BEx Web applications and queries with live data.
Various Knowledge Management functions, such as subscriptions for documents, are available for these items. There is a specially modified user interface for displaying BI items in KM folders. You can also change or extend this interface to meet your requirements.
Hope this helps.
Regards,
Deepak Kori

Reg Link to Knowledge Management in Java system

Similar Messages

Maybe you are looking for