Reg:lsmw(direct input)

hi friends,
i need your help in lsmw direct input method.
my problem in my flat file one header and multiple header lines.
how to handle in direct input method.

Hi,
At "Maintain Source Structures" you need to define two structures. One for header and one for item.
HEADER_STRUCTURE
|___
       ITEM_STRUCTURE
At "Maintain Source Fields" you need to define one field as identifier at first field of the structure. Double click at the field and fill "Identifying Field Content".
Then the source file could be specified as below.
H     100965
I     1     Test 1
I     2     Test 2
I     3     Test 3
I     4     Test 4
H is the identifying field content for header and I for item.
Regards,
Teddy

Similar Messages

Error log table for LSMW-Direct input

Can any one tell me , What is the table for storing the error messages in LSMW-Direct input?
Regards,
Nagesh

for LSMW-Direct input method you can use EXCUTE IN BACK GROUND. the job is running and see the job name in SM37 . after completion of your job , select you job name and press the SPOOL button there you can find the you job error log.

Problem while Creating BOM using LSMW Direct Input

Hi all ,
I am trying to create the BOM Using LSMW Direct Input Method .
I am getting problem at step 9 that is Read Data.
It is able to read the values from header and item files .
but it is not able to write , so the Written is 0 always .
I put the field names first in the flat file and correcponding values below it with tab delimited.
Please let me know where the Problem would be.... I am trying this from long time ..
Regards ,
Raj

hi ,
Yes i am specify files i am attaching 2 files .
ones is header and the other is line item data .
my strucure is :
Hi ,
I am still getting problem while for writing the records after reading the data .....
my header structure :
STYPE
MATNR
WERKS
SELAL
STLAN
DATUV
ZTEXT
my item structure :
STYPE
MATNR
WERKS
SELAL
POSTP
MENGE
my header data :
STYPE     MATNR     WERKS     SELAL     STLAN     DATUV     ZTEXT
1     388     0110     20     1     06.01.2009     SAMPLE ZTEXT
my item data :
STYPE     MATNR1     WERKS     SELAL     POSTP     MENGE
1     388     0110     20     N     1234
1     382     0110     20     N     12345
Above text files are delimited by tabulator.
Please guide me . The files are reading but unable to write .....
Regards,
Raj

Net Price Calculation Error in LSMW(Direct Input)

Hi,
i am using LSMW-Direct Input method for Creating Purchase Order .i am facing Problem like Quantity Conversion error in Net Price Calculation.
Any one please help me out.
Regards,
Shobha Henry

Best practice would be to use BAPI/ALE method instead of direct input but if you've already done with the mapping etc. try putting a break point in the generated LSMW program where the net price is calculated and transferred to SAP field and then run it to see in the debugger what's going on. I reckon its possibly a type compatibility error.
Hope this helps,
Cheers,
Sougata.

LSMW(Direct Input) Material master issues

Hi,
I have few issues on Material master-LSMW(Direct Input-RMDATIND) data upload(creating materials).
1. Can i upload excel sheet for uploading data! What option i have to choose in 'specify files' for this!
2. I am using fields MBRSH, MTART, MAKTX, MEINS, BISMT, MATKL, MAGRV for mapping.
    But when i tried to upload in last step-start direct input program with Lock Mode-'N' it is giving error as
    'Plant data does not exist'. Because this is for 'Basic Data' i though no need to input plant.
3. MATNR field is not needed for creation right as it is auto generated!
4. I have to do seperate object for this project for 'Sales organization data' & Plant Data is there any checks needed for the same!
Can anybody give solutions for the above!
Thanks in advance.
Thanks,
Deep.

1. Now i am trying to process 4 records it is creating 3 records.
    It is always skipping 1st record in flat file.
    Any check required!
2. Also i want to write a output file(log file) to my presentation/application server with all material no's created & material descriptions. Where can i do the same!
3. Can anybody tell me how to upload using excel sheet.
Thanks,
Deep.
Edited by: Deep on May 14, 2009 3:21 PM

Create Inspection Plan -LSMW -Direct Input -Error with Control Indicators

Hi,
I am creating Inspection Plans using LSMW-DIRECT INPUT Method.
Although MIC's control indicator parameters are correct while creating a plan it is changing the control indicator parameters.
how can we suppress this?
I want to use MIC's default parameters.
Regards
Praveen

have Lost Previous File
what does that mean? did they lose the source that should be used to load the data from?
without source you cannot load data.
Had you ever got this source file? how? by mail, then check your old mails and take it from there, ask the sender to he/she checks the SENT folder in his mail system. Maybe someone has a local copy of this fille.

Log For LSMW Direct Input

How do i check the log for LSMW direct Input
Also When i run the LSMW program the LAST STEP has Start Direct Input
What all step do i need to select to make the program run Automatically
Now i tried doing that but had to press Enter key until the load was Over
Thankyou
Sh

hi,
use option extended log (e.g. in rfbibl00) and after run goto sm37 - Job-log
A.

Material Master upload - LSMW direct input method - Internal Number problem

Dear friends,
I am uploading material masters with LSMW - Direct Input Method.
The materials have internal numbers.
I have four plants and I want to extend the same material in all plants.
But LSMW is creating a new material for each row.
Is there any way out or any indication I put in file to repeat the internal numbers created for all other plants?
I can create another LSMW for material extension. But I want to know whether the problem can be solved in the current LSMW?
Regards,
Avinash

http://www.sap123.com/a/98/
Check the internal number range once.... before extending mateial...

Fields mobile no, house no is not there LSMW direct input customer master

Hi All,
In LSMW direct input method for customer master(RFBIDE00) fields mobile number, house number is not available. But field street(STRAS) is available there is no field like house number .
How to proceed futher. please let me know the suggestion . It's is urgent.
Regards,
Karthik.

1) read documentation to rfbide00 with se38
2) if you want to use the new adress-fields from table adrc you must use bapi or bdc to xd01
A.

LSMW --direct input for sales order

Hi frenz,
         We are facing a problem in mapping the fields, sold-to-party and ship-to-party in structure BVBPAKOM.
I have already tried using partnerfunction(PARVW) and custno(KUNNR). Even then i got an error 'Specify ship-to-party or sold-to-party'. Can anyone help me regarding this problem.
              Helpful answers will be rewarded with points and wishes.
                                          ---praveen.

hi,
join this link dude
LSMW DIRECT INPUT FOR SALES ORDER
cheers,
sanjay.

LSMW - Direct Input - Sales order - item text

Hi,
I'm having a problem similar to the problem posted by Laurent Guilloteau on 2/3/2006 titled:
LSMW - Direct Input - Sales order - item texts
While this thread shows the issue as being answered, I'm not clear on what action to take.
I'm using an LSMW with program RVINVB10 to load sales orders to SAP.
I'm successfully loading the orders, including header level text, however the item text is not showing on the order.
I have source structures defined as follows:
Source Structures
       REC1                     VBAK - Header
           REC4                     VBPA - Order Partners
           REC6                     BTEXHKOM - Header Text Header
               REC7                     BTEXLKOM - Header Text Lines
           REC2                     VBAP - Order Items
               REC8                     BTEXHKOM - Item Text Header
                   REC9                     BTEXLKOM - Item Text Lines
               REC3                     VBEP - Order Schedule Lines
In actions 'Read Data' and 'Convert Data', I see text for the two text structures, at the header and item level. But after execution of Direct Input program, I don't see text in at the item level of the sales order, however I do see text at the header level.
Does anyone have any insight on what's causing the item level text not to show on the order?
Best regards,
Stuart

Hi all,
Many thanks for the suggestions. One of our expert developers got involved and provided the solution.
In order to have item level text populate, the VBAP-PSTYV (the sales document item category) field also needs to be populated. The VBAP-PSTYV field value is dependent on the sales document type. (Or, at least it is for the configuartion set up in my example) The sales document type is VBAK-AUART.
Stuart

LSMW Direct input method: 0150 Characteristics with Values

I am trying to upload several characteristics with Values using LSMW Direct Input method 0150.I have defined 2 level structure for Characetristic header and values. Have set the relevant indicators as 1 for characterisitc data and 2 for Values. I have set the T-code to CT04.I am trying to upload the data but only Characteristic data is getting generated and not the values. Can anyone help me out as to what may be the reason.
The fields I have in my uploading template is as below:
LINK     NAME     DESCRIPT     STATUS     FORMAT     LENGTH     DECIMALS     UNIT     WERT
1     TON     WEIGHT LIFT CAPACITY     1     NUM     8     0     ton
2                                        20
2                                        50
2                                        60
2                                        70
2                                        100
The Fields I have mapped in Source structre are:
Source Fields
        CHARACTERISTIC            PM Characteristics
            LINK                           C(001)    Identify Field Content:1
                                           Identifing Field Content: 1
            NAME                           C(030)    Characteristic Name
            DESCRIPT                       C(030)    Characteristic description
            STATUS                         C(001)    Status of a characteristic
            FORMAT                         C(004)    Data Type
            LENGTH                         C(002)    Number of Characters
            DECIMALS                       C(002)    Number of Decimal Places
            UNIT                           C(006)    Unit of Measure, Language-
            CHARACTVALUE              Characterisitc Values
                LINK                           C(001)    Identify field content
                                               Identifing Field Content: 2
                BLANK1                         C(001)    Blank1
                BLANK3                         C(001)    Blank3
                BLANK2                         C(001)    Blank2
                BLANK4                         C(001)    Blank4
                BLANK5                         C(001)    Blank5
                BLANK7                         C(001)    Blank7
                BLANK6                         C(001)    Blank6
                WERT                           C(030)    Characteristic Value
Source Structure is:
Source Structures
        CHARACTERISTIC           PM Characteristics
         CHARACTVALUE             Characterisitc Values
Structure relation is as below:
Structure Relations
        BGR00 Batch Input Structure for Session Data                       <<<< CHARACTERISTIC PM Characteristics
              Select Target Structure BGR00 .
            BIMST Batch input for characteristics                              <<<< CHARACTERISTIC PM Characteristics
                  Select Target Structure BIMST .
                BIMZW Batch Input: Allowed Characteristic Values                   <<<< CHARACTVALUE   Characterisitc Values
Can anyone help me resolve this issue.....
Thanks in advance
Murad

Hi,
Go through this links its might helpfull to you.
Re: Porblem during characteristics LSMW
Assigning Characteristics to a class using LSMW
Issues Uploading Characteristics Data into SAP Using LSMW
LSMW: CHaracteristics Load
Thank you,

LSMW - DIrect Input Method --PO

HI All,
I am using LSMW Direct input method to upload Purchase orders.But my probelm is i am using Two files for header and items. In my case i have to upload so many Purchase orders with multiple item data at a time.
Example.
Header file
H1 ......
H2 .......
H3 ......
H4 ......
Item File
I1 ....
I1 ....
I2 ....
I2 ....
I3 ....
I3 ....
I3....
I4....
But my question is How the program will identify Which items are related to particular Header.
Please help me on this.
What will be the identification for header and item.
Thanks in advance,
Bhanu P R Gattu.

I usually use a single file for both header and item:
When you specify your source file, contents must be "Data for Multiple Source Structures (Seq. File)", and header record must precede item(s) record(s):
H1
I1-1
H2
I2-1
I2-2...
Regards,
Guillermo.

LSMW direct input method - Equipment BOM

Hi Experts,
We have already written program for equipment BOM master in LSMW direct input method. I do not know about this direct input method.
Here they have maintained 2 source structures and relavant source fields. one for BOM header and other for BOM items. The first field they maintained is LINK in both the source fields. I really do not know what that field is all about. I checked in step specify files and found that they have previously mentioned two files, one for BOM header and other for BOM items. but when I tried to save in this step it gives me error that " No logical path specified". Can anybody tell me what is this error is all about.Please heip me to get out of this problem.
Thanks and best regards,
Praveen

Hi praveen,
LSMW does not accept two files.
In the step create source strcture
crte one structure with BOM header like with ZBOM_H.
Under that create another structure for item ZBOM_I.
ZBOM_H
ZBOM_I like this structure will will be.
In the step source fields.
crate onne variable with indicatoe header.While creating the variable we have field 'identify field content ' field in pop up screen 'H'.
assign all header files under identifier 'H'.
then under ZBOM_I create identifier with 'I'.
Assign all the item fields to this.
then map the fields.
In the file should be H header fields.
                              I item fields.
                              I
                              I.
Then Header .It should be like this.
in saptechnical u will get the examples go though them once.
Thanks

LSMW - Direct Input- RMDATIND- Converted data is different.

Hi Experts,
I am working on LSMW - Direct Input- by std. program RMDATIND for material Update,
When I display converted data, its different than data that I see in display read data step,
Each time in step display converted data,one perticular record is displayed.. Even though
I change input data.
I like to know why converted data shown is wrong?
thanks & regards
Ashish

Hi thomas,
thanks for your help....
i created 2 materials in file, i.e. with material no. xxxxx2 & material no.xxxxx 3.
Or even if i created record in iput file with other materila no.
At each end every time I can see only one converted data record eith Material no. Value = xxxxx1.
thanks & regards
Ashish

Reg:lsmw(direct input)

Similar Messages

Maybe you are looking for