Reg. Maintain the posting keys necessary for transaction EXD.

Dear friends
I am getting the below error message when I release the billing in VF02
Error in account determination: table T030K key NCCA EXD
Message no. FF709
Diagnosis
In the chart of accounts to be posted to, no accounts are defined for the tax code you used.
Procedure
Contact your system administrator.
Define the accounts to which a tax posting is to be made with the tax code entered in Customizing for taxes on sales/purchases.
To do this, choose Maintain entries (F5).
Please help me.
Thanks
Rajakumar.K
Edited by: Raja Kumar on Jun 4, 2011 2:02 PM
Edited by: Raja Kumar on Jun 4, 2011 2:53 PM

Hi,
In VKOA maintain G/L account for NCCA + EXD combination
Kindly take help of FI Consultant for this
Kapil

Similar Messages

Posting keys for account determination for transaction EXD do not exist

hi
i am doing Sales order for 1 month,no error i have got
but now i am getting error
Posting keys for account determination for transaction EXD do not exist
HELP

Hello,
I have following suggestion to overcome this issue.
1. In the t-code "FTXP", check for assignment of the G/L account for the posting key.
2. Check out the SAP Note:200348.
3. In t-code "OBCN",for the account key EXD, make sure that the value of posting indicator is 2.
4. In t-code OBYZ, for the tax calculation procedures, change the key to EXD. The account keys in tax pricing procedures and SD pricing procedures Should be same.
Regards,
Sarthak

Using a "Posting Key" relevant for the calculation of sales

Hi All,
if I make a posting by F-02 using a "Posting Key" relevant for the calculation of sales, I wonder: in which table SAP registers the data of sales?
Is there the way to modify the relevance for sales of that posting?
Thanks

Hi
As far I know, sales figures are getting updated in the following summary tables:
KCN1 for Customer related.
LFC1 For Vendor realted.
Regards

New transaction key with the posting key 24 and 34

Hi,
i want to create a new transaction key with the posting key 24 and 34.
the corresponding table is T030B.
but what is the Tcode/ IMG path to create it?
Regards,
Swetha

Hi,
Go to FBKP. Click on Automatic Postings.
Suppose you want to see the Exchange Rate diff. then click on it. You will see the transaction. Suppose KDB. Then double click on it. Now click on posting keys. The same will be defined in the table which is given by you.
Regards,
Jigar

Maintain the acct key and accruals/provisions in the calculation schema

Dear All,
I have a problem during invoice posting.
I create a new freight condition type & assigned it to the calculation schema. I also create a new account key & assigned to the calculation schema in accrual keys. Then done OBYC settings. During MIGO, its working fine. But when i post the Miro against po, giving an error msg., "Maintain the acct key and accruals/provisions in the calculation schema, Message no. M8434"
plz help me to solve this issue.

Have you ticked the 'Acruals' in control data 2 in M/06 for this condition.
Regards,
Piyush

Maintain the acct key and acurals/provisions in calculation schema-MIRO

Hi,
In PO we have maintained different delivery condition.
When we are doing MIRO we are getting error "maintain the acct key and acurals/provisions in calculation schema" for condition type YLBB and YLBE.
However we have checked condition type and calulation schema and found that acct key and accurals maintained.
YLB9     BivacInspec.fee/Quan
YLBB     LPRC charges/Quant.
YLBC     Port charges/Quant.
YLBE     Clearing Charges/Qt.
Please suggest somesolution.
Thanks
Ashok

Hi Ashok,
In M/08 check whether   acct key and acurals/provisions in calculation schema" for condition type YLBB and YLBE are maintained or not.
Also if they are maintained there then check in M/06 for condition type YLBB and YLBE , whether accurals check box are checked or not...If not check and then try.
Cheers!!!
Utsav

Entry help check fot the posting key in user exit.

Hi,
I am using an inbound idoc for posting FI document.I am just parking the document for the time being .For this i am using the user exit EXIT_SAPLF050_006.
If I want to change this parked document as save as complete document is there anything that I can do in this user exit.Can you please tell me the entry help check for the posting key (changing parameter) in the exit?
Thanks in advance
Regards,
Reni

Hi,
I am using an inbound idoc for posting FI document.I am just parking the document for the time being .For this i am using the user exit EXIT_SAPLF050_006.
If I want to change this parked document as save as complete document is there anything that I can do in this user exit.Can you please tell me the entry help check for the posting key (changing parameter) in the exit?
Thanks in advance
Regards,
Reni

How is the posting key determined?

Hi,
I have a general question about posting keys.
What is the logic behind the posting keys (customizing OB41)?
I think we have 2 possibilities:
With automatic postings, the posting keys are picked up from the "Account assignment" in Customizing (OMWB).
With manual postings, the posting key is selected manually when making the posting.
Do you have any more information about it?
Thank you for your feedback.
Kind regards,
Linda

Linda,
Posting Key is a 2 character numerical key that controls the entry of line items.
The posting key determines:
Account type
Debit/credit posting
Layout of entry screens
When you enter a posting, you enter a posting key for each item. This key determines how the item is posted. Posting keys are defined at client level and therefore apply to all company codes.
The posting key determines:
The data you can enter in the line item
How data you post is processed
How the system updates the data you enter
Posting keys are differentiated by customer, vendor and G/L accounts. Apart from the General Ledger Accounting (FI-GL) and Accounts Receivable and Payable (FI-AR/AP) components, there are also posting keys for asset and material accounts.
Hope that helps.
Nandita

POSTING Key problem for 15 & 40

Hi All,
when i am using BAPI_ACC_DOCUMENT_POST.
it executes successfully but
if i enter the amount with + sign it uses 01 as the posting key.
if i entered the amount with - sign it selects 11 as posting key.
but requirement is instead of 11 or 01 I want 15 and 40 as posting key for Document type DZ .
how it determines the key?
and can i change the posting key?
How can I pass the posting key field to this BAPI?
Please can anyone help me regarding this....Thanks in Advice.

Hi Suresh,
Please follow the thread given below which talks about issue with posting key.
FB01 and BAPI_ACC_DOCUMENT_POST
Best Regards,
Krishna

SSL: How to use the same key pair for ABAP & JAVA?

Hello,
I want to setup an XI (3.0 on Netweaver04)installation in the way, that ABAP AS and JAVA AS use the same key pair for SSL. My problem is to define the same private key on ABAP and JAVA. With the JAVA Administrator I am able to define or import a private key. But I could not find a possibility in ABAP to manage private keys in order to use the same on as in JAVA. What is the procedure for this?
Thanks and Regards,
Frank Tottleben

Hello,
I want to setup an XI (3.0 on Netweaver04)installation in the way, that ABAP AS and JAVA AS use the same key pair for SSL. My problem is to define the same private key on ABAP and JAVA. With the JAVA Administrator I am able to define or import a private key. But I could not find a possibility in ABAP to manage private keys in order to use the same on as in JAVA. What is the procedure for this?
Thanks and Regards,
Frank Tottleben

What is the default key command for the COMMAND key?I seem to have changed it somehow along the way and now when I push the command key it hides all windows or shows desk top I need to correct this as soon as possible-.any ideas?

What is the default key command for THE COMMAND (apple) key? I seem to have changed it somehow along the way and now when I push the command key (only) it hides all open windows and shows the desk top and when I push it again it shows all windows again...I need to return to default A.S.A.P. just this one key...Any ideas? Thanks in advance...

Go to
 > System Preferences > Keyboard
Click on the 'Keyboard' tab and hit the 'modifier keys...' button. You can see and change the defaults there.
As I'm not sure if all the labels are the same in Lion, he's a screenshot from Snow Leopard. It should be similar enough:

Where we maintain the CST & VAT numbers for a plant which is not a register

Hi All,
Where we maintain the CST & VAT numbers for a plant which is not a registered for Excise?
we are printing it on the invoice output. on debugging it is known that it comes from the table AUSP, after checking the table CABN.
Any body knows about these two tables? let me know the purpose of these tables
thanks in advance,
Venkat

Mr Big Screams.....
I hope you have neigther read my reply completely nor understood correctly.
Let me tell you, maintaining record in J1ID in Plant address details doesnt declared that plant is registered under Excise act until unless you maintain ECC details. ( ECC -Excise Control Code number which will be alloted by the Central Excise dept).
You will find CST / VAT fields in J1ID which is actually given to maintain Plant address details for INDIA localization.
Hope its clear.
Regards,
Reazuddin MD

Just had help installing cc 2014. get this dialog box when i open the app. One or more files in the adobe folder necessary for running photoshop are missing. Help

Just had help installing cc 2014. get this dialog box when i open the app. One or more files in the adobe folder necessary for running photoshop are missing. Help

Please Run the Cleaner tool to remove Ps CC 2014 :http://www.adobe.com/support/contact/cscleanertool.html .
Restart your system and then try installing Ps CC 2014 again.
Regards,
Ashutosh

What are the post installation steps for sap 4.7ee

what are the post installation steps for sap 4.7ee

Hi,
Post installation steps are as follows.
1.SICK to be run first to checkt the errors while installation.
2. Install SAP GUI
3. Set up the TMS. Configuration the domain controller through SE06 and then set up the transport system through TMS.
4. Change the default password of SP* and DDIC.
5. Set up the operations mode using RZ04 and SM63.
6. Apply patches through SPAM.
7 Schedule default background jobs through SM36.
8 Import default profiles through RZ10.
9. Schedule backup calender through DB13.
10. Create clients using SSC4
11. Install lisence
12. Schedule SGEN

Account posting keys involves for process of third party order

hi
pls tell me the process of third party order and whos account stock will be debited and tell me the account posting keys involves in this process and how it operates
regards
Ram
Edited by: Ian Wong on Aug 13, 2008 7:06 PM

THIRD PARTY SCENARIO
In third-party order processing, your company does not deliver the items requested by a customer. Instead, you pass the order along to a third-party vendor who then ships the goods directly to the customer and bills you. A sales order may consist partly or wholly of third-party items. Occasionally, you may need to let a vendor deliver items you would normally deliver yourself.
Process Flow
The processing of third-party orders is controlled via material types. Material types define whether a material is produced only internally, can be ordered only from third-party vendors, or whether both are possible. For example, a material that is defined as a trading good can only be ordered from a third-party vendor. However, if you manufacture your own finished products, you may also want, from time to time, to be able to order the same type of product from other vendors.
Processing Third-Party Orders in Sales
Third-party items can be created automatically by the system, depending on how your system is set. However, you can also change a standard item to a third-party item during sales processing manually.
Automatic third-party order processing
If a material is always delivered from one or more third-party vendors, you can specify in the material master that the material is a third-party item. During subsequent sales order processing, the system automatically determines the appropriate item category for a third-party item: TAS. To specify a material as a third-party item, enter BANS in the Item category group field in the Sales 2 screen of the material master record.
Manual third-party order processing
In the case of a material that you normally deliver yourself but occasionally need to order from a third-party vendor, you can overwrite the item category during sales order processing. For a material that you normally deliver yourself, you specify the item category group NORM in the material master.
If, as an exception, you use a third-party material, change the entry TAN to TAS in the ItCa field when processing the sales document. The item is then processed as third-party item.
If address data for the ship-to party is changed in the sales order in third-party business transactions, the changed data will automatically be passed on to purchase requisition and also to the purchase order ,if one already exists. In the purchase order, you can display the address data for the ship-to party in the attributes for the item.
You can only change the address data for the ship-to party in the sales order for third-party business transactions, and not in the purchase order.
Processing Third-Party Orders in Purchasing
When you save a sales order that contains one or more third-party items, the system automatically creates a purchase requisition in Purchasing. Each third-party item in a sales order automatically generates a corresponding purchase requisition item. During creation of the requisition, the system automatically determines a vendor for each requisition item. If a sales order item has more than one schedule line, the system creates a purchase requisition item for each schedule line.
Purchase orders are created from purchase requisitions in the usual way. For more information about creating purchase orders, see the Purchasing documentation. During creation of the purchase order, the system automatically copies the delivery address of your customer from the corresponding sales order. In a sales order, you can enter purchase order texts for each third-party item. When you create the corresponding purchase order, the texts are automatically copied into the purchase order. The number of the purchase order appears in the document flow information of the sales order.
All changes made in the purchase order are automatically made in the sales order as well. For example, if the vendor confirms quantities and delivery dates different from those you request and enters them in the purchase order, the revised data is automatically copied into the sales order
You process third-party items by creating a normal sales order. In overview for the order, you can then overwrite the default item category (TAN in the standard system) with the special item category for third-party items: TAS
Billing Third-Party Orders
If relevance for billing indicator for the item category has been set to B (relevant for order-related billing on the basis of the order quantity) in Customizing, the system includes the order in the billing due list immediately. If, however, the indicator has been set to F (relevant to order-related billing on the basis of the invoice quantity), the system does not include the order in the billing due list until an invoice from the vendor has been received and processed by the purchasing department. In the standard system, item category TAS (third-party order processing) has been given billing-relevance indicator F.
In the first case, the third-party order is considered to be completely billed only when the invoiced quantity equals the order quantity of the sales order item. In the second case, each time a vendor invoice is received, a customer invoice is created for the quantity in the vendor invoice and the order is considered to be fully invoiced until the next vendor invoice is received.
If you have activated billing-relevance indicator F for item categories in Customizing, billing can refer to the goods receipt quantity instead of the incoming invoice quantity.
You can control whether the invoice receipt quantity or the quantity of goods received is relevant for billing in Customizing for copying control for billing at item level.
FOR YOUR PROCESS Individual Purchase Orders WELL GIVE THE RIGHT SOLUTION
Individual purchase orders are used when your customer orders goods from you that are not in stock and must be ordered from one or more external vendors.
Process Flow
During sales order entry, the system automatically creates a purchase requisition item. The purchasing department creates a purchase order based on the requisition and the vendor ships the goods directly to you (unlike third party order processing, where the vendor ships directly to your customer). You then ship the goods to your customer. While the goods are part of your inventory, you manage them as part of the sales order stock. Sales order stock consists of stock that is assigned to specific sales orders and cannot be used for other purposes.
Goods receipt will be posted when ever the vendor ships the goods to our customer.
We will do this transaction in SAP using MIGO.
Invoice receipt is done when the Vendor sends us the invoice.. ( I.e Billing ).
It can be done using MIRO.
THe above two steps are standard and manual. There are many other ways that the actual process can happen. If the client follows EDI standards then the Goods receipt and Invoice receipt can be done through IDOCs automatically.
Process Flow for 3rd Party Sales
Customize the third party sales in summary:
Prerequisites for 3rd party sales,
Purchasing org,
purchasing group,
assign the Purchase org to company code
assign Purchase org to plant,
should not maintain the stock in material, it should be trading goods,
1. Create Vendor XK01
2. Create Material Material Type as "Trading Goods". Item category group as "BANS".
3. Assign Item Category TAS to Order type that you are going to use.
4. A sale order is created and when saved a PR is generated at the background
5. With reference to SO a PO is created (ME21N). The company raises PO to the vendor.
6. Vendor delivers the goods and raises bill to company. MM receives the invoice MIRO
7. Goods receipt MIGO
8. Goods issue
9. The item cat TAS or Schedule line cat CS is not relevant for delivery which is evident from the config and, therefore, there is no delivery process attached in the whole process of Third party sales.
10. Billing *--
SD - 3rd party sales order Create Sales Order
VA01
Order Type
Sales org, distr chnl, div
Enter
Sold to
PO #
Material
Quantity
Enter
Save
SD - 3rd party sales order View the PR that is created with a third party sales order
VA01
Order Number
Goto Item Overview
Item ->Schedule Item
SD - 3rd party sales order View the PR that is created
ME52N
Key in the PR number
Save
SD - 3rd party sales order Assign the PR to the vendor and create PO
ME57
Key in the PR number
Toggle the "Assigned Purchase Requisition"
Execute
Check the box next to the material
Assign Automatically button
Click on "Assignments" button
Click on "Process assignment"
The "Process Assignment Create PO" box , enter
Drag the PR and drop in the shopping basket
Save
SD - 3rd party sales order Receive Goods
MIGO_GR
PO Number
DN Number
Batch tab , click on classification
Serial Numbers tab
Date of Production
Flag Item OK
Check, just in case
Post
Save
SD - 3rd party sales order Create Invoice
MIRO
Invoice Date
Look for the PO , state the vendor and the Material
Check the box
Click on "Copy"
Purchase Order Number (bottom half of the screen)
Amount
State the baseline date
Simulate & Post
Invoice Number
*Invoice blocked due to date variance
SD - 3rd party sales order Create a delivery order
VL01N
In the order screen , go to the menu Sales Document , select "Deliver"
Go to "picking" tab
State the qty and save
SD - 3rd party sales order Create a billing document
VF01
Ensure that the delivery document is correct in the
Enter
Go to edit -> Log
Save
Third party order processing is as follows:
Assume three companies X, Y and Z
X - The company,
y - The customer
Z - Vendor
When ever X gets a PO from Y to supply some goods, X has an option of either manufacturing those goods or procuring those goods.
If he is procuring the goods, there are two methods that are generally followed:
Method 1) After receiving the PO from Y, X creates a sales order against Y.
Now at the same time he also creates a PO to a vendor Z to produce the goods
Z produces the goods and supplies to X
X receives the goods from Z
Then X delivers the same goods to Y.
After that X invoices Y and Z invoices X.
Note : Here there is no direct/ Indirect relation between Z and Y.
This process is known as Trading Process. and the Material here is created with Material type HAWA.
The other method is a Third party order processing method:
Here the glaring difference is that instead of Z supplying the material to X and X in turn supplying the same material to Y.
X authorizes Z to supply the material to Y on his behalf and notify him once the delivery is complete.
Now Z supplies the material to Y and acknowledges the same to X.
Z will send a copy of delivery acknowledgement and invoice to X.
After receiving the delivery confirmation and invoice from Z, X has to verify the invoice and this process is known as invoice verification and is done in SAP through Tcode MIRO.
The next step for X is to create an invoice and submit to Y
Only after the invoice verification document is posted then only X can create an invoice for Y.
This is the business flow that is followed for third party order configuration.
There are few steps that have to be configured to enable the system to function as mentioned above.
Step1)
If you are always following a third party process for a material then you have to create the material using item category group BANS.
The procurement type should be marked as External procurement (F) in MRP 2 view of the material master record.
if you are not always allowing third party order processing then u can create a material master record with item category group as NORM and the procurement type should be marked as ( X) meaning both types of procurement ( in house manufacturing and external procurement).
Step 2)
the item category in the order should be manually changed as TAS.
For that you need to configure the item category determination
Order type + item cat Group + Usage + High level = Item cat + Manual item cat
OR + NORM + + = TAN + TAS
OR + BANS + + = TAS
Step 3)
make sure that during the item category configuration for TAS you need to mark relevant for billing indicator as F
step 4)
The schedule line category for this type should be CS.
make sure that you mark subsequent type as NB - purchase requisition in this schedule line category as this will trigger the purchase requisition order immediately after the creation of the sales order and the PO to vendor is created against this purchase requisition.
Award if Helpful,
Regards
Priyanka.P

Reg. Maintain the posting keys necessary for transaction EXD.

Similar Messages

Maybe you are looking for