Reg:Material Master Foriegn Trade view Update

Hai All,
I need to update the Material Master (mm02) transaction
In that foriegn trade view i need to update .
Is there any BAPI or Function module or any standard program is there?
Could you please help me out?
I need to update the Custon Tariff Prefe. In Foriegn trade view.
Please help me out.
Thanks & Regards,
S.Chaitanya.

Hi Chaitanya,
  There is no separate function module tro only change the foreign trade information but the generic function module is
BAPI_MATERIAL_SAVEDATA
Regards,
Ravi

Similar Messages

  • Control Code in Material Master Foreign Trade Export view

    Hi All,
    In material master Foreign Trade Export view we have a field Control Code (MARC - STEUC) i would like to know where do we configure these control codes in SPRO?
    I need to know the path to configure them
    Regard s
    Pavan

    spro@Logistics - General@Material Master@Material IDs@Maintain PKWiUs
    Regards,
    Indranil

  • Legal Control data for a Material in Foreign Trade View.

    Hi All
    We are facing the  problem for updating the Legal Control data for a Material in Foreign Trade View.
    Is there any BAPI for doing that ?
    Please guide me.
    Thanks in Advance
    Regards
    Kiran K Vadrevu

    We figured this out.  We used SM30 to find table / view V_T604F  and add a value for country US.
    Edited by: MacaryD on Feb 4, 2010 5:13 PM

  • Error in Excise Data subscreen in Material Master:Foreign Trade-Import Data

    SAP Net Weaver ECC6.0
    I have added the 'Excise data' subscreen in Material master 'Foreign trade IMport' and 'Foreign Trade Export' tab. But facing the following problem. please help.
    There are two buttons called 'More' and 'PreVals' in that subscreen. If I click either of them, it gives an error message as below
    "Record 21 MORE does not exist in table T133E
    Message no. M3748"
    and
    "Record 21 J1PR does not exist in table T133E
    Message no. M3748"
    Kindly help what to do

    OK
    Lets starts from first step.
    Go to OMT3B
    1.  Copy 21 and make it 91
    2. Then from left hand side select Data screens no 15 copy it and make it 91 - Z1
    3. Then again go to left hand side   Subscreens and copy 6 and make it 91 - 71 - z and assign screen no 2205 and add prograne as SAPLJ1I_MATERIAL_MASTER
    save it
    Then go to OMBt3E and copy 01 -* HERS * 12 and mahe it 01 -* ROHor FERT * 91 and save it and then check and revert back
    regards

  • Control Code field in Material master- Foreign Trade imports tab

    Hello Experts,
    I am trying to understand the purpose of Control Code(MARC-STEUC) field in Material master- Foreign Trade imports tab. I am also interested in knowing where does this field appear in our PO.
    Please help..
    Manish

    Normally control code specifies the norm to follow by the supply plant for a sale of exposrts. each contry will have a set of rules to get follow as a stuatory . this code specifies the rules or certificates.
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/93/7443a5546011d1a7020000e829fd11/frameset.htm
    may be comes in a sale order.
    Regards

  • Material Master Data purchasing view

    Hi, All,
    I have question on material master data purchasing view. There are 2 indicators.
    One is 'automatical purchase order', what effect if I tick this box? Another is 'Source List', what effect if I tick this box?
    Thanks for your answer in advance

    Defines that purchase orders are generated automatically when purchase requsisitions are converted into purchase orders.
    Use
    If this indicator is flagged, the system does not display the purchase orders on the screen before they are saved.
    Dependencies
    In the master record for the vendor with whom the material is ordered, the field "Automatic purchase order" must be flagged in the control data for the purchasing data.
    If the source list is ticked, system expects a source list for the material with a vendor and it will not allow to create PO giving a error message,source not included despite of source list requirement if it is not created.
    Regards,

  • Reg Material Master Updation

    Dear SAP Genius
    is it possible to delete the sales view for a material in material master?
    if it's possible how to delete that?
    please explain the steps.
    Advance thanks.
    Regards
    Irshath

    Dear Kayalan,
    1.In standard SAP it is not possible to delete one particular view once after created.
    2.The only way in my understanding s setting the deltion flag and carryingout a reoganizing run and create a new material
    master for the same.
    Regards
    Mangalraj.S

  • Foriegn trade view in MM01

    Hi,
    I have used BAPI_material_savedata to load material data, in that babi I couldn't able find the Foriegn trade import view can any one give the suggestion for this.
    regards,
    paul

    Hi,
    Foreign Trade view comes under Purchasing or Sales view,
    depending upon whether it is Export or Import.
    You will need to fill PLANTDATA, PLANTDATAX parameters of the BAPI.
    Also, some fields for FT view are at client level.
    hence, fill the CLIENTDATA and CLIENTDATAX parameters of BAPI_MATERIAL_SAVEDATA.
    It will create Foreign Trade view.
    Hope this helps..
    regards,
    Shashank

  • Reg : Material Master Idcos

    Hi All,
    I have changed " material grouping " field  in workscheduling view in material master for some materials and the job will run every friday then triggers the idocs for the mateiral master changes. I have changed on 01.06.2010 and it should trigger on 04.06.2010 but the idoc is not triggered till now for some materials.
    I have checked all the possibilities like DF plant level ( LVORM ) ,  P-S matl status ( MMSTA ) but everything is fine.
    Please let me know how to check why the idocs are not triggered for this change.
    Because these changes are not reflected in 3rd party system as the idocs are not triggered and we are facing many problems due to this .
    Help me regarding this issue.
    Thanks ,
    Usha

    Hi  Raja,
    Thanks for your reply !!
    I have checked in BD52 , field is there in the logical message.
    I checked the filter conditions also , these materials are satisfying the condition too.
    Here we are not using change pointer technique.

  • Problem in material master LSMW - Classification view

    Hello all,
    I have created LSMW for material master upload with standard input method. Material is getting created thr's this, but 'classification view' is not getting created only for some material groups. Functional consultant is saying that there is no such configuration exists in system regarding material groups.
    Plz advice how to resolve this?.
    Regards,
    Aparna Gaikwad

    I giveup now
    You close my all doors by saying "All views r needed".
    Now i would suggest if any help you can take
    Expert Forums » SAP Solutions » ERP - Logistics Materials Management (MM)
    There definatly you would be able to find some alternate solution.
    Cheers
    Amit.

  • MM01 Create New Material Master without Basic view

    Hi,
    The SAP system allow us to create a new material master Purchasing View only (without Basic views). We execute T-code MM01, select Purchasing view only, enter the purchasing view data and save. Material master created with only the Purchasing view.
    We want to control whereby Basic view must be created first before any plant/organisation material views (Sales, purchasing, Accouting etc) can be created. That means user cannot create Purchasing view ONLY if the Basic views is not created, can this be done??
    best regards,

    Hi,
        For most of the standard SAP material types the basic data 1 view is configured as mandatory, but that can be turned off in the configuration. The first place I would look would be in SPRO under 'Logistics - General -> Material Master -> Basic Settings -> Material Types -> Define Attributes of material types'. In this transaction, highlight the material type being used and click on the magnifying glass. The section 'User departments' shows what views can be created for a material. You need to check 'Basic Data' is selected here.
    If that isn't the problem, then I would suggest that you look at the screen sequence and also the field selection configuration for the material type, which you can find under 'Logistics - General -> Material Master -> Configuring the Material Master'. This configuration dictates what fields are shown on the material master and the status of each field, i.e. whether it is mandatory or not.

  • Foriegn trade view in BAPI_MATERIAL_SAVEDATA

    HI,
    I am using BAPI_MATERIAL_SAVEDATA in that I cant  able to find the Foreign trade view can any one suggest me where it is.
    regards
    paul

    Hi,
    Foreign Trade view comes under Sales/Purchase view depending upon whether it is import or export.
    Hence, there is no specefic selection for it.
    This view contains some client level data and some plant level data.
    If you fill CLIENTDATA, CLIENTDATAX, PLANTDATA and PLANDATAX parameters, the FT view will be created.
    Hope this helps..
    Regards,
    Shashank

  • Reg : material master change history

    Hi All.
    I am changing the value of the material master characterstic assigned to class under the classification TAB of material master.
    I want to extract the last chaged date of the characterstic value.
    The material master change history ( Table CDHDR)  is not reflecting the changes done to the characterstic value.
    Can anybody please suggest me how can i extract the change history of the characterstic value of a given class for a given material.
    Thanks
    Vijay

    Hi
    If a field is changed in any transaction with a new values those changes are recorded in CDHDR and CDPOS tables with the field name, Transaction name and field old and new values, changed by and date etc
    So you have to fetch the change data history from those tables passing the
    OBJECT CLAS = MATERIAl and the Objectid = Material no and fetch the data from CDHDR first and then for all entries of CDHDR fetch the data from CDPOS and use the data and required fields
    Regards

  • Reg material master

    Can you please help look for information on:
    1. How to identify the last used date of materials?
    2. How to identify materials that have not been used at all?
    3. Any report that is available to directly delete material master?

    Hi
    1. How to identify the last used date of materials?
    ANS  : MAy be from MB51 u can get when last document was posted for this material with movement type
    2. How to identify materials that have not been used at all?
    Ans  : MC50  dead stock for perticular date range
    3. Any report that is available to directly delete material master?
    Ans  : U have to mark material master for deletion in MM06 and then archive it
                  Follow link for more details
                     http://www.sap-img.com/bc003.htm
    cheers!!!
    Vishal...

  • Reg: Material Master in BEx

    Hi All,
    I am working on IS-retail with BI implementation project, we have material master with 150000 records, the issue that I am facing is, in BEx we have 65536 rows so, when I execute a query it is giving me a message "result incomplete" andit will not show complete records.
    Can anyone of you please explain how to overcome this situation and give me some suggestuions that I should follow.
    Regards
    Amit Kapoor

    Hi,
    limitation of Excel is 65536 rows.So you will not be able to see complete data.one way is you can go for webreports where you can see complete data.
    thanks

Maybe you are looking for

  • User-defined function in package

    Hi all, is it possible to return more than 1 value when using user-defined function in package?

  • 1.4.2 Java Swing problems

    I have a swing application with 2 JComboBox 's, 1 JPanel (for pictures), 1 JButton and a scroll pane. Basicall the JComboBoxes have an action listener that changes the pictures when I cahnge the names. However, I would like the Jbutton when pressed t

  • Email sent but not received by individuals

    Hello, I am facing an issue in email distribution through WF. Emails are generated and can be seen in SAP basis inbox. (i.e. you can see the email address/user ids in To field or Cc field). Few of the users are getting email notification in their inb

  • CSS on some pages is not displaying properly on initial page load.

    I'm running into an issue where a page loads and the styles do not render correctly. After the page loads, I can temporarily fix this by choosing: View->Page Style->No Style, then doing it again with: View->Page Style->Basic Page Style. Though when n

  • My 5s won't turn on

    My 5S won't turn on and charge. Someone suggested holding the home and on/off button for 10 seconds. this worked and I was then able to charge phone.  Thank you.