Reg MDM - BP "Consolidating Master Data" in Solution Manager
Hi,
In solution manager there are standard Business Process (BP) and Business Process Steps (BPS) defined for each BP under any functional area. Similarly when we look at the standard BP for MDM we have "Consolidating Master Data" as one of the BP. Under that we have a two BPS called 1. <b>"Change or enrich records "</b> - I understand that this BPS is referring adding or changing some field values in data manager. The second BPS is <b>"Use external data quality services to cleanse and enrich data"</b>. - I understand this step should be the Validation rules that we run. Is my understanding correct? because the 2nd BPS say "external data quality service" - this is where am bit confused.
Your inputs are welcome !
Thanks in advance
Hi Arumgam,
Validations belon to <b>"Change or enrich records"</b>. <b>"Use external data quality services to cleanse and enrich data"</b> means that you can connect MDM to other third party services (e.g. for address data cleansing) using MDM's enrichment controller.
BR Michael
Similar Messages
-
Error - Update Product Data in Solution Manager
Hello,
We are currently downloading the Enhancement Package 4 in SOLMAN via Maintenance Optimizer, however, after choosing the Technical Usages in step 2.1, it shows an error in step 2.2 (Select OS/DB Dependent Files):
Error : Update Product Data in Solution Manager
Has anyone encountered the same problem? Would it be fine to continue on the next step after selecting the files which you need for your operating system-database combination.
Any information is highly appreciated. Thank you.Hi Jaypee,
Check guide How-To Install EHP4- A practical guide. Solution of this problem is documented there. you can download it from http://service.sap.com/erp-ehp
Extract from this guide for this problem:
Make sure that you update the product data in SAP Solution Manager. This is described in SAP Note 1277035 which is referenced from the collective SAP Note 1122966. If you do not update the product data, you might get an error message after the stack calculation. The message text explains the problem in more detail.
Thanks
Sunny -
Incident management and Critical Master data table change management.
Dears,
I need to configure Incident management and Critical Master data table change management on our solman 7.0 server.
I want to know how many days should be required for this activity and please share documents.
ShivamHi,
I faced a similar situation,
I tried all the possible ways like activating InfoObject manually, Through an activation program of aggregates,
Also ran RSRV check which was showing no negative results.
I raised an OSS note for the same but after that when SAP returned back the process chian ran again as it is a daily load which activated the record in 'M'.
I ask you to wait till the next process chian run, and try all possible ways to activate.
If it is not corrected then raise an oss to SAP.
Thanks & Regards,
Vishnu -
Year Dependent Master Data in Funds Management
Hi Gurus,
Can anyone explain what is the difference between "Year dependent master data and Year independent master data" in funds management and its importance?
Thanks in advance,
Regards,
Ganeshhi
year dependent master data will have validity till the year.
year independent master data will not have any validity -
How Consolidated Master Data Gets Linked to the Transactional Data?
Hi,
Suppose we have three legacy systems holding customer master data. We fetch the data from these three systems into MDM and consolidate the records. Let's say there were three customer master records:
CUST123, John James, 123 Elm Street
CT00123, James, John, 123 Elm St.
0000123, John James, 123 Elm Street.
We merge them in MDM and create one record
NEWCUST123, James, John, 123 Elm Street
Question is: How the transactional data from the three legacy system will be mapped to this new customer master record? How the purchase orders will know that CUST123 is now NEWCUST123 ? When this mapping happens in a project and who does that?
Regards,
-T
Edited by: mdm3north on Jul 21, 2011 2:30 AMHI,
I agree with Anil on that,it is the same reason for which few projects have key mapping repository in place,which holds the key field mapping information telling them that this Customer number means this in the Legacy system.
Well manual intervention is required as PR/PO which is active should be closed before such an activity.
Thanks,
Ravi -
Reg lsmw for customer master data transfer
Hello All,
I want to know while transfering data by lsmw for customer master data .
Scenario : There are more then one ship-to-party and bill to party so how to upload the data in this case?????
Thanks,
Sunnyhi
just refer to the link below
http://www.sapmaterial.com/?gclid=CN322K28t4sCFQ-WbgodSGbK2g
<b>step by step procedure with screen shots</b>
regards
vijay
<b>plz dont forget to reward points if helpful</b> -
"Error reading credit master data" in contract management in CRM 7.0
Hi All,
In CRM 2007,whenever we navigate to contract management screen,error message come which is "Error reading credit master data "
Any suggestion on how to solve this issue.
Regrads
NikhilHi All,
This is resolved.
Just set the entry in the table CRMV_CREDIT_GEN to 'Do not Display credit master data '
Regards -
Update Business Partner Master Data for Incident Management
Hi fellow SAP-ians,
I have two questions that I need to ask in relation to Incident Management SOLMAN 7.1:
1) Can Business Partner (BP) master data be mass updated via a catt script? (recording of transaction BP)
2) What BP roles can I use if i need to capture profit center, cost center and department info for each BP and to be able to display those info from Incident Management (CRM Web UI)?
Thanks in advance. Your swift response is highly appreciated.
B.Regards,
KhairulHi Vikram,
I appreciate your quick response. I went over the document that you've mentioned. However, nothing in there seemed to help.
Just FYI, i need to create/change approx. 25,000 Business Partners in SOLMAN 7.1 by 1)creating system users in SOLMAN and 2) execute report AI_SDK_USER_BP_GEN to generate/update BP IDs accordingly.
My question was, lets say if i needed to enter profit center, cost center and division info into each BP. In what BP role and fields, besides the standard BUP001 (Contact Person) & BUP003 (Employee), that I can use to enter those type of information?
For example, profit center - 88KUL186; cost center - 88KUL186; division - KLIA.
Thanks in advance. -
SAP, VBScript, import data to solution manager
Hi,
I'm trying to import to Solution Manager a testset-structure (from Excel, but Excel is no problem)
I could not find out, how to allocate in SOLAR01/02 a folder structure, testpackages and last but not least testcases, I did not even succeed to explore the existing GuiTrees,
somebody has experience, eventually examples?
thanks in advance
IstvanHi,
Thanks again.
Now i am able to send the session data. As you have mentioned i have created a new sevice session in DSWP and run refresh session and that has created the job sap earlywatch alert for solution manager.
But I am facing an error when generating the report. The background job is getting cancelled.
Job log overview for job: SM:EXEC SERVICES 000000000100100 / 14484200
Job started
Step 001 started (program RDSMOPBACK_AUTOSESSIONS, variant &0000000000000, user ID ADMIN)
RDSMOPBACK_AUTOSESSIONS : MemSize Begin = 1374664
Solution AGI_Landscape is being edited (Operations)
( EWA_FS ) Session 0060000000029 for 25.08.2009 created (SOL)
( EW_ALERT ) Session 0060000000030 for 24.08.2009 created (BIP)
( EW_ALERT ) Session 0060000000031 for 24.08.2009 created (R3P)
Trying to perform session 0010000000305
Session 0010000000305 performed
Trying to perform session 0060000000028
ABAP/4 processor: SYNTAX_ERROR
Job cancelled
Any suggestions?
Regards,
Amit. -
Extract data from Solution Manager database
Hi,
I am investigating the possibility of using SQL to extract alert data
from the Oracle database directly.
I have looked in the database to find the tables which would provide
such information, and I have found some promising tables.
But I need to understand how the data is stored in the Solution Manager
system, I see that once the solution manager application is started it
pulls the data from the CCMS alerts on the remote systems. But that
data needs to be stored somewhere. Can you tell me if it is buffered in
an internal table or a structure.
Is it possible to use the SAP tables to produce such a report, or which
BAPI's can I use to extract the data.
Thanks
Chris aka BoobBooHi Chris:
If you want to interact with the Alerting data, you should use the XAL External Interface for Alert Management.
You can find the additional information and also the XAL BAPI guide in SAP Service Marketplace under System Monitoring.
Hope this helps!
Federico G. Babelis
NetWeaver Certified Consultant
GAZUM Technologies S.A.
Consulting Services and Software Solutions
http://www.gazum.com
...download FREE Marketplace Manager at: http://www.gazum.com/products -
Master data for asset management ?
hi all,
i am new to asset accounting ...can any one guide me what are all the master data for asset managementhi,
As far as my knowledge
i can tell u only two master data.
that is
1. Asset Master record
2. sub asset master record.
I have conversated to FI consultant... he is saying these two master data are only available in Asset accounting. -
Master data for warehouse management
Hi experts what are the master data for the warehouse
management module.............Hi
Sending you all the table for the warehouse mangement.
Inventory document
IKPF Header: Physical Inventory Document
ISEG Physical Inventory Document Items
LINK Inventory document header in WM
LINP Inventory document item in WM
LINV Inventory data per quant
Storage locations and stocks
LAGP Storage bins
LEIN Storage unit header records
LQUA Quants
LQUAB Total quant counts for certain strategies
MEIK Make-to-Order Stock for Customer Order
MSCA Sales Orders on Hand with Vendor
MSKA Sales Order Stock
MBPR Stock at Production Storage Bin
MLGN Material Data per Warehouse Number
MLGT Material Data per Storage Type
Rewards if useful.
with regards
Nikunj Shah -
After installing Appl. Server, there are no EWA Data in Solution Manager
Hello,
my satelite system send the ewa to the solution manager. After installing a second appl. server for the satelite system, there are no data show in the ewa on the solution manager.
In the logfile from the sdccn on the satelite system, you could see that the data was send.
Transfer of session data completed to destination...
On the satelite system i can see, that the ewa contain some data. But in the solution manager the ewa is empty...
Any suggestions ??
Regards
Ronald
Edited by: Ronald Negendank on Mar 23, 2010 11:50 AMHello Amber,
sorry for late. I delete the service definiton on both side (solman and satelite system). I rescheduled the tasks and the data was send successfully.
This is a part of the LOG from send the session data
25.03.2010 16:42:09 Transfer of session data completed to destination XXXXX
25.03.2010 16:42:09 > transfer completed
25.03.2010 16:42:09 > transfer for server XXXX completed
25.03.2010 16:42:09 > transferring 000031 functions, 0000144878 bytes, RFC block size = 0000320000 for server
25.03.2010 16:42:09 > transfer for server XXXXX started
25.03.2010 16:42:09 > transfer for server XXXXX completed
25.03.2010 16:42:07 > transferring 000197 functions, 0001771754 bytes, RFC block size = 0000320000 for server
25.03.2010 16:42:07 > transfer for server XXXXX started
25.03.2010 16:42:06 > transfer data to mapped session ID 0000008719 200 destination XXXXXXXXX
25.03.2010 16:42:06 Transfer of session data started to destination XXXXXXX
But the EWA in the solution manager is still empty...
Regards
Ronald
Edited by: Ronald Negendank on Mar 26, 2010 11:51 AM -
Error while trying to export data from Solution Manager 3.1
Hello, when trying to export a project via SOLAR_MIGRATION in Solution Manager 3.1, I get the following error when trying to release the transport:
COMMUNICATION_FAILURE for RFC call SCMS_CONT_EXPORT (destination SAPKPROTP): / RfcExecProg: SAP0451.
Error in calling KPro transport server
Has anyone experienced this or have an idea how to reslove it? I opened a message through OSS and received this feedback:
sapkprotp is not available for AS/400.
In your case, sapkprotp must be started on the SAP Content Server.
sapkprotp must then be started via a SAP Gateway connection.
Please change the RFC destination of SAPKPROTP so that
the program must be started on your SAP Gateway on the content server
computer.
We currently don't have a Content Server and I would like to be able to export this project without having to install a new application on a Windows server. I would appreciate any insight you may have into this. Thank you.
~TJIf you don't have one already create a gateway instance on your Content Server.
Change or create the RFC destination : SAPKPROTP type = T
Check the radio button to start on Expicit Host
Enter the program = c:\winnt\sapkprotp.exe
Enter target host - use the hostname of the server for your Content Server
Enter the Gateway information
Regards,
Brian -
Reg:Validation on Item Master data
Hi,
I would like to put the validation for Item Name and UOM Name fields in Item Master in Update mode.
And i try to do the following query.But it is not restricted in update mode.
if @object_type ='4' and @transaction_type in ('U')
begin
IF EXISTS(select t2.itemcode from oitm t2 where
t2.docentry =@list_of_cols_val_tab_del and
t2.itemname not in
( select t1.itemname from oitm t1 where t1.itemname is not null) or t2.InvntryUom not in(select t1.InvntryUom from oitm t1 where t1.InvntryUom is not null))
select @error=N'1',
@error_message =N'You cannot update this document.'
end
please correct my given query.Hi md,
If's wrong in this :
t2.docentry =@list_of_cols_val_tab_del
change by the following
if @object_type ='4' and @transaction_type in ('U')
begin
IF EXISTS(select t2.itemcode from oitm t2 where
t2.Itemcode =@list_of_cols_val_tab_del and
t2.itemname not in
( select t1.itemname from oitm t1 where t1.itemname is not null) or t2.InvntryUom not in(select t1.InvntryUom from oitm t1 where t1.InvntryUom is not null))
select @error=N'1',
@error_message =N'You cannot update this document.'
end
Hope it helps
Maybe you are looking for
-
Why is the screen on my black iPhone so much better than my white one?
the white's screen is washed out and the black has more contrast and is brighter
-
HT2188 my iphone is not coming up in itunes under devices
When i plug in my iphone to computer i am no longer seeing ''devices'' in list and so i cannot sync my iphone, any ideas??
-
Hi All, We are facing a problem in SRM production system. The PO is created in SRM after approval completion. Now the PO is not creating in ECC prod system. We are getting the following error in SRM EBP. Comm. error checking account assignmt for purc
-
Connect to a HP Printer shared by a PC?
I want to be able to print from my parents HP Printer that is installed on a windows PC. How do I connect to it? Macbook Pro retina, Mavericks.
-
How can I watch was is showing on my Mac on my Apple TV?
Hi, I just got the Apple TV and I would like to show what is playing on my Mac on the TV. How do I accomplish this? Thank you!