Reg. Microsoft FrontPage configuration

how to know Microsoft FrontPage configuration info in SP

The SharePoint Team Services dialogview client SHOULD perform an HTTP HEAD request, as specified in
[RFC2616], section 9.4 against owssvr.dll (for details, see section
3.1.3). If the return code from the server is 200, the client SHOULD perform an HTTP GET, as specified in
[RFC2616], section 9.3 to retrieve the full page body. If the return code from the server is 410, the client MUST NOT perform an HTTP GET on the server.
http://msdn.microsoft.com/en-us/library/jj575337%28v=office.12%29.aspx
http://msdn.microsoft.com/en-us/library/jj557128%28v=office.12%29.aspx
http://www.acunetix.com/vulnerabilities/microsoft-frontpage-confi/
Upgrade Frontpage Server Extensions to the latest version.

Similar Messages

  • Reg: Automatic TT Configuration

    Hello,
    I have a request from the Customer or Client for configuring Automatic TT Payment for their foreign currency paymets. I would like to know the Questions to be asked with customer before  starting up the configuration.
    I know the configuration steps but i don't know the Set up of the client.
    Requirement is
    Create an Interface between SAP to CITIBANK and vice versa.
    What are the questions  need to be ask before starting up this configuration with the client.
    Can any one help me projecting the Man days needed for this configuration. Since the requirement is very urgent, am expecting an reply at the earliest.
    Thankyou.
    Sincerely,
    Ashok

    The SharePoint Team Services dialogview client SHOULD perform an HTTP HEAD request, as specified in
    [RFC2616], section 9.4 against owssvr.dll (for details, see section
    3.1.3). If the return code from the server is 200, the client SHOULD perform an HTTP GET, as specified in
    [RFC2616], section 9.3 to retrieve the full page body. If the return code from the server is 410, the client MUST NOT perform an HTTP GET on the server.
    http://msdn.microsoft.com/en-us/library/jj575337%28v=office.12%29.aspx
    http://msdn.microsoft.com/en-us/library/jj557128%28v=office.12%29.aspx
    http://www.acunetix.com/vulnerabilities/microsoft-frontpage-confi/
    Upgrade Frontpage Server Extensions to the latest version.

  • How can i connect Microsoft Frontpage 2003 to CQ5 Repository via WebDav ?

    Hi,
    i have a little problem.
    I need to connect Microsoft Frontpage 2003 to CQ5 Repository via WebDav keeping the functions of competitive access (check-in, check-out, file lock).
    Someone have any idea?

    Hi,
    Check configuration
    http://help.sap.com/saphelp_45B/helpdata/en/04/81dd57bf2811d2897f0000e8216438/frameset.htm

  • SQL 2012 Best Practice Analyzer issue with nothing available in pulldown on Microsoft Baseline Configuration Analyzer V2.0

    We have tried using both a Windows 7 and a Windows 8 machine and still cannot see any items available in the pulldown (ie. no sql 2012 or anything)  Is this a known issue and BPA does not work for SQL 2012?  Any suggestions?  I've seen several
    posts with the same issue but, no resolution.
    Laura

    Hi Laura,
    I installed Microsoft Baseline Configuration Analyzer 2.0 successfully. I can select a product: SQL Server 2012 BPA. Do you mean this?
    Thanks.
    If you have any feedback on our support, please click
    here.
    Maggie Luo
    TechNet Community Support

  • SQL Server Setup failure.SQL Server Setup has encountered the following error: Method not found: 'Boolean Microsoft.SqlServer.Configuration.MsiExtension.MsiExtensionMetadata.get_IsSlipstreamOrPatch()'.. ----------

    Hi Team,
    Earlier i had SQL Server 2008 R2 on my Machine. For one work around i unistall SQL Server 2008 R2 and Trying to install SQL Server 2008 but i am not able to install with below error:
    TITLE: SQL Server Setup failure.
    SQL Server Setup has encountered the following error:
    Method not found: 'Boolean Microsoft.SqlServer.Configuration.MsiExtension.MsiExtensionMetadata.get_IsSlipstreamOrPatch()'..
    Thanks

    Hi Lydia,
    i have followed the above step and i am able to proceed further but while installation i am getting the below error consistently.
    TITLE: Microsoft SQL Server 2008 Setup
    The following error has occurred:
    Locating the SQL Server Browser service component failed with Windows Installer return code '2'. The component ID: '{2E86FD41-C179-456E-8E6A-5157ED427228}'.
    Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
    For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.0.1600.22&EvtType=0x8510C01B%25400x31BA4472%25401222%254052007
    BUTTONS:
    &Retry
    Cancel
    2: 
    TITLE: Microsoft SQL Server 2008 Setup
    The following error has occurred:
    SQL Server Browser configuration for feature 'SQL_Browser_Redist_SqlBrowser_Cpu32' was cancelled by user after a previous installation failure. The last attempted step: Retrieving full path to the SQL Server Browser service executable using Windows Installer
    API for the SQL Server Browser component with ID '{2E86FD41-C179-456E-8E6A-5157ED427228}'..
    For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.0.1600.22&EvtType=0x8510C01B%25400x31BA4472%25401222%254052007
    BUTTONS:
    OK
    After ignoring these step..installation getting complete but ..at the end i am not able to connect to server.
    Could you please help me on this.
    Thanks,
    Sumit

  • SQL Server Setup has encountered the following error: Method not found:'Boolean Microsoft.SqlServer.Configuration.MsiExtension.MsiExtensionMetadata.get_IsSlipstreamOrPatch()

    Hello,
    When I am installing SQL Server 2008 on win7, I encountered an error: SQL Server Setup has encountered the following error: Method not found:'Boolean Microsoft.SqlServer.Configuration.MsiExtension.MsiExtensionMetadata.get_IsSlipstreamOrPatch()‘
    What's the metter? What can I do to deal with it? 
    I need your speed answers.
    Thanks,
    Vicky Song

    Hello,
    Looking at your issue I am wondering if your media is corrupt. 
    What edition of SQL Server you are trying to install? Did you download that media? 
    If you downloaded it, perhaps you should try to download it again.
    Are you able to install that SQL Server 2008 on another machine without any problem?
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • The Type initializer for 'Microsoft.Exchange.Configuration.Tasks.ThrottlingModule1' threw an exception

    Hello,
    I am getting the error message listed in the topic subject when i try to install the Exchange Server 2013 SP1 Evaluation Mode downloaded from your website. After completing all requirements & pre-requisites, I started the installation with the Mailbox
    & Client Access role selected, when i get to the screen which says "Readiness Check" main page subject, and the progress says Configuring Prerequisites, before any progress in the %, i get the error message:
    The Type initializer for 'Microsoft.Exchange.Configuration.Tasks.ThrottlingModule1' threw an exception
    and it says retry.
    Knowing that the server is a member of a domain.How would i resolve this issue?
    Thanks,
    Elie

    hi Ed,
    i am running Windows Server 2012 R2 Standard Evaluation Edition with Exchange Server 2013 Evaluation, But that error message was resolved by removing and re-installing .NET Framework 3.5. That is fine now.
    But now i am getting another error message When it tries to install the Management Tools.
    (Step 1 of 9: Management Tools)
    Error: The Following error was generated when "$error.Clear();
    Set-LocalPermissions
    "was run: "The process does not possess the 'SeSecurityPrivilege' privilege which is required for this operation"'
    knowing that the server is part of a domain and the domain controller runs Windows Server 2008 R2 Evaluation Edition.
    Any ideas why this error message popups up?
    Regards,

  • Readiness Checks fail with "The type initializer for 'Microsoft.Exchange.Configuration.Tasks.ThrottlingModule`1' threw an exception."

    There's another thread about this issue but the accepted answer actually has nothing at all to do with the original problem/question so that's a bit deceptive.
    Anyway, when trying to install Exchange 2013 SP1 (on 2012 R2 Datacentre) the installation reaches the Configuring Prerequisites part of the Readiness Checks and then fails out with the message:
    The type initializer for 'Microsoft.Exchange.Configuration.Tasks.ThrottlingModule`1' threw an exception.
    I honestly can't find any way around this issue and the only mentions I've seen resulted in people reinstalling Windows which obviously isn't really a resolution to the problem.
    Is there any known fix for this issue?

    Ok well I've managed to get around that now by recreating a few registry keys and documented that here (apparently I'm not allowed to create links so can't put that here).
    I have a new issue now though. It seemed to get almost all the way through the installation process but is now failing due to a "memory" issue although due to the wording I can't tell whether it means RAM or Disk space. Either way, neither should
    apply. The drive has 80GB of space available and the machine has 8GB of RAM (only 2GB in use at the time the installer was ran and the amount didn't drop).
    The exact error is...
    Error:
    The following error was generated when "$error.Clear();
    Write-ExchangeSetupLog -Info "Setting up FIPS configuration based on Exchange Install Path";
    $FipsDataPath = [System.IO.Path]::Combine($RoleInstallPath, "FIP-FS\Data");
    $FipsEnginesPath = [System.IO.Path]::Combine($FipsDataPath, "Engines");
    Write-ExchangeSetupLog -Info "Loading FipFs snapin";
    Add-PsSnapin Microsoft.Forefront.Filtering.Management.PowerShell -ErrorAction SilentlyContinue;
    Set-ConfigurationValue -XPath "/fs-conf:Configuration/fs-sys:Machine/fs-sys:Paths/fs-sys:TraceFile" -Value $FipsDataPath -Confirm:$false
    Set-ConfigurationValue -XPath "/fs-conf:Configuration/fs-sys:Machine/fs-sys:Paths/fs-sys:Engines" -Value $FipsEnginesPath -Confirm:$false
    # Copy Microsoft Engine to Engines folder during the install
    $FipsBinPath = [System.IO.Path]::Combine($RoleInstallPath, "FIP-FS\Bin");
    $MicrosoftEngineSourcePath = [System.IO.Path]::Combine($FipsBinPath, "Engine\Microsoft");
    $MicrosoftEngineDestinationPath = [System.IO.Path]::Combine($FipsEnginesPath, "amd64\Microsoft");
    $MicrosoftEngineExists = Test-Path $MicrosoftEngineDestinationPath
    if(! $MicrosoftEngineExists)
    Robocopy $MicrosoftEngineSourcePath $MicrosoftEngineDestinationPath /S /COPYALL
    " was run: "Creating an instance of the COM component with CLSID {2DC947D7-A2DC-4276-A554-891346CE2032} from the IClassFactory failed due to the following error: 8007000e Not enough storage is available to complete this operation. (Exception from HRESULT: 0x8007000E (E_OUTOFMEMORY)).".
    Error:
    The following error was generated when "$error.Clear();
    Write-ExchangeSetupLog -Info "Setting up FIPS configuration based on Exchange Install Path";
    $FipsDataPath = [System.IO.Path]::Combine($RoleInstallPath, "FIP-FS\Data");
    $FipsEnginesPath = [System.IO.Path]::Combine($FipsDataPath, "Engines");
    Write-ExchangeSetupLog -Info "Loading FipFs snapin";
    Add-PsSnapin Microsoft.Forefront.Filtering.Management.PowerShell -ErrorAction SilentlyContinue;
    Set-ConfigurationValue -XPath "/fs-conf:Configuration/fs-sys:Machine/fs-sys:Paths/fs-sys:TraceFile" -Value $FipsDataPath -Confirm:$false
    Set-ConfigurationValue -XPath "/fs-conf:Configuration/fs-sys:Machine/fs-sys:Paths/fs-sys:Engines" -Value $FipsEnginesPath -Confirm:$false
    # Copy Microsoft Engine to Engines folder during the install
    $FipsBinPath = [System.IO.Path]::Combine($RoleInstallPath, "FIP-FS\Bin");
    $MicrosoftEngineSourcePath = [System.IO.Path]::Combine($FipsBinPath, "Engine\Microsoft");
    $MicrosoftEngineDestinationPath = [System.IO.Path]::Combine($FipsEnginesPath, "amd64\Microsoft");
    $MicrosoftEngineExists = Test-Path $MicrosoftEngineDestinationPath
    if(! $MicrosoftEngineExists)
    Robocopy $MicrosoftEngineSourcePath $MicrosoftEngineDestinationPath /S /COPYALL
    " was run: "Creating an instance of the COM component with CLSID {2DC947D7-A2DC-4276-A554-891346CE2032} from the IClassFactory failed due to the following error: 8007000e Not enough storage is available to complete this operation. (Exception from HRESULT: 0x8007000E (E_OUTOFMEMORY)).".
    So if it's not the drive (there's only one drive in the machine) or RAM then what exactly has it ran out of?

  • Microsoft Frontpage to iWeb 08

    Hey all, I tried searching for this topic but couldn't really come up with anything. I am in charge of the website where I work. When I took over the site was already created and on a remote server that I log into through Microsoft Frontpage. I rebuilt the site when I took over. Now I got a mac a few months ago. I'm not really interested in rebuilding the site again, but I would like to start creating some new pages on iWeb and uploading to the server. For example: The homepage is created in Frontpage, but when someone clicks on a link it goes to a page that was created in iWeb. Is there any way to do this? If so, how? I'm pretty new to mac and haven't quite figured out all the capabilities yet.
    Thanks!

    You can easily upload to an external server from iWeb. In 09 you have the option to use the new build in ftp or you still have the option of publishing to a folder and uploading using Cyberduck. Upload the site folder and the index.html file.
    You can link other pages together on a server, however, having the home page in FrontPage could be a problem due to the index file - in iWeb this points to the home page of your site, so you might have to re-create your home page in iWeb instead. It would make it easier and then you can just upload together.

  • Error: The type initializer for 'Microsoft.Exchange.Configuration.Tasks.ThrottlingModule`1' threw an exception.

    having problems on new server so I followed instructions to remove Exchange Server 2013 Sp1 using ADSI edit p;er these instructions:
    http://blog.dargel.at/2012/11/20/complete-remove-exchange-2013-using-adsiedit/
    now when I re-run setup for exchange 2013 SP1 I get the error :    
    "Error: The type initializer for 'Microsoft.Exchange.Configuration.Tasks.ThrottlingModule`1' threw an exception."
    David Sheetz MCP

    contrary to what Ed says you can fix this, it is way harder than it should be and I have NEVER had this many issues on a  fresh build! 
    things to note on Exchange 2013
    1. IPv6 MUST work and also DNS set manually, verify port 25 is open on your firewalls!
    2. even if services are running make sure there are no errors in the application event log and check that all services on the Exchange server are set to ACTIVE. to find out type the below command in exchange management shell
    Get-ServerComponentState –Identity servername
    3. The group "everyone" did not have the right "Access this computer from the network". This could be seen by an audit failure in the security log stating that the user
    "<mailbox server name>" did not have the required login type (login type 3).
    Adding everyone to the "Access this computer from the network" right solved the issue. 
    To enable "Access this computer from the network" :
    Run "gpedit.msc"
    Navigate through
    Computer Configuration > Windows Settings > Security Settings > Local Policies > User Rights Assignment
    Double click
    on "Access this computer from the network", and ensure "Everyone" is added.
    4. verify all connectors are setup correctly
    Also I found an error in the event log Event
    ID: 1009 once I fixed that emails started to fly!
    To resolve the issue, use one of the following methods.
    Method 1
    Create a new Active Directory group that is named “ContentSubmitters,” and then grant Admistrators and NetworkService full access to the group. This is a dummy group and should be used as a placeholder only. You might want to add a description so that
    the group is not removed.
    Force or wait for Active Directory replication.
    Restart the following services:
    Microsoft Exchange Search
    Microsoft Exchange Search Host Controller
    Method 2
    You can also resolve this problem by removing a configuration entry that refers to the ContentSubmitters group. This entry is present in four files. Each file is calledWcfConfigurator.xml,
    and you can find each file in the following folder:
    %ExchangeInstallPath%\Bin\Search\Ceres\HostController\Data\Nodes\Fsis\<var style="border:0px;font-family:monospace, monospace;font-size:1em;font-style:inherit;font-weight:inherit;margin:0px;outline:0px;padding:0px;vertical-align:baseline;">NODENAME</var>\Configuration\Local
    Here, “%ExchangeInstallPath%” is the Exchange installation root path (available in the environment variable of that name), and the placeholder <var style="border:0px;font-family:monospace, monospace;font-size:1em;font-style:inherit;font-weight:inherit;margin:0px;outline:0px;padding:0px;vertical-align:baseline;">NODENAME</var> represents
    one of the following names. (There is one name for each of the four files that are to be edited.)
    Helpful articles
    http://blog.dargel.at/2012/11/20/complete-remove-exchange-2013-using-adsiedit/
    http://exchangeserverpro.com/exchange-2013-manually-configure-dns-lookups/
    David Sheetz MCP

  • Microsoft Baseline Configuration Analzyer 2.0 not working

    We have a SBS 2003 and would like to perform a swing Migration to SBS 2011. We are following the guide at
    http://technet.microsoft.com/de-de/library/gg563799.aspx. Unfortunately, we can't get the "Microsoft Baseline Configuration Analyser 2.0" to run. The dropdown for "Select
    a product" is blank and the "Start scan" is greyed out.
    We have also installed SBS Best Practices Analyzer Tool. We have deinstalled and reinstalled both Tools.
    Any ideas?

    Did you install Microsoft PowerShell 2.0 first?  Try rebooting also.  This link has links to more detailed guides based on the MS one that may help:
    http://blog.mpecsinc.ca/2011/05/sbs-2003-to-sbs-2011-migration-guide.html
    -- Al

  • Can't get Microsoft FrontPage to connect to Oracle 9.2i

    After considerble discussion in the microsoft.public.frontpage.client newsgroup (subject: "Database | Results ... won't ... through Oracle ODBC"), we had to give up and conclude that there didn't seem to be a straightforward way to connect to Oracle 9.2i via the FrontPage database wizard.
    I tried a system Oracle ODBC DSN via MS Access and it worked; but, ` can't get the same DSN to work from FrontPage. From FrontPage it generates a user/password error, though the same user/password works from MS Access.
    I tried an OLEDB connection and still received the following:
    Server error: Unable to connect to a database from the web server using the
    connection string 'Provider=MSDAORA; PWD=myPwd; UID=Administrator; Data
    Source=glOdb.mikecoughlin.net'.
    The following error message comes from the database driver software; it may
    appear in a different language depending on how the driver is configured.
    ORA-01017: invalid username/password; logon denied
    Source: Microsoft OLE DB Provider for Oracle
    Number: -2147217843 (0x80040e4d)
    I'm certain that this user/password combination is valid e.g. it works in Enterprise Manager to view tables etc.
    So, my question is:
    Does anyone have a/the workaround to use FrontPage to connect to Oracle 9.2i ?
    thanks,

    Trying use ODBC driver of Oracle Client, available on this Web Site.

  • Form created in Microsoft Frontpage?

    Hello,
    I am attempting to fix a form using Dreamweaver.  The form is located at the top-right corner of http://www.imagecandyusa.com
    The code for the form is as follows:
    <form method="POST" action="_vti_bin/shtml.exe/index.htm" onSubmit="" name="IC_home_page" webbot-action="--WEBBOT-SELF--">
    <!--webbot bot="SaveResults" U-File="_private/form_results.csv" S-Format="TEXT/CSV" S-Label-Fields="TRUE" startspan B-Reverse-Chronology="FALSE" S-Email-Format="TEXT/PRE" S-Email-Address="[email protected]" B-Email-Label-Fields="TRUE" B-Email-Subject-From-Field="FALSE" S-Email-Subject="SEND ME A QUOTE" S-Builtin-Fields="REMOTE_NAME REMOTE_USER HTTP_USER_AGENT Date Time" U-Confirmation-Url="confirm.htm" S-Date-Format="%A, %B %d, %Y" S-Time-Format="%I:%M:%S %p" --><input TYPE="hidden" NAME="VTI-GROUP" VALUE="0"><!--webbot bot="SaveResults" endspan i-checksum="43374" -->
    The form is returning a 404 Error File Not Found:
    http://imagecandyusa.com/_vti_bin/shtml.exe/index.htm
    Although I checked with the webhost and the filepath above does exist, I believe there may be an error somewhere in the code. 
    Can anyone identify what software was used to create this form or how I may resolve this issue?
    Sincerely,

    My web host supports FrontPage. I don't know why, but they say theyhave a lot of people using it. FrontPage was originally created by the Cambridge, Massachusetts company Vermeer Technologies, Incorporated, which is why the files and directories for FrontPage have vti in them.
    Frankly, if they were going to support something right out of the starting gate, I think they should support WordPress, which is actually being developed, rather than FrontPage.
    Where FrontPage extensions are in place on a server and are properly configured to handle email, FrontPage will provide you the ability to specify an email address to send the form data to as a property of the form. The program then generates the instructions needed to utilize the Webbot in the FrontPage Extensions on the server to send out your email.
    This proprietary system cannot be accessed by Dreamweaver. Instead, Dreamweaver can help you create a script in a language hosted on your server, like php or ASP or ColdFusion that will do the "heavy lifting" of processing the result of the form and sending an email in response.
    If the rest of your website was built using FrontPage, It's advisable to rebuild it in Dreamweaver. To do this, you'll need an understanding of HTML and CSS. Then, for your form, you would build that in Dreamweaver and use the scripting language available on your server. Since php is free and open source, most servers have that.
    Here is a link for a tutorial for creating a contact form in HTML4.01 and CSS3, where you can download the script that runs in the background.
    -Mark

  • Microsoft Word configuration

    Hello,
    I installed SAP Solution Manager 4.0 but every time I try to display/edit a MS Word or Excel Document I get the error:
    - THE DOCUMENT CANNOT BE EDITED or
    - THE DOCUMENT CANNOT BE DISPLAYED
    If I try to display/edit TXT documents, the integrated SAP text editor starts and everything works fine.
    Are there Microsoft Word or Excel configuration settings in the Solution Manager?
    Is it necessary to have MS Office installed on the SAP Server?
    Thanks,
    Manuel

    Hi -
    Our team encountered this problem after installing SAP GUI 7.10. Check your latest patch level. Applying Patch 2 fixed it for us. 
    http://service.sap.com/patches
    - Search for Support Packages and Patches
    - Enter Search Term "SAP GUI"
    - Select SAP GUI FOR WINDOWS
    - Select SAP GUI FOR WINDOWS 7.10 CORE
    - Select SAP GUI FOR WINDOWS 7.10 CORE, on the next page also
    - Select Win 32
    - Arrive at avail. downloads

  • Reg.Batch management configuration guide

    Dear Experts
    We want to maintain batch at material level. How to configure in ECC6.00. Pls help me giving the step by step configuration guide. and also AFS configuration guide.
    Thanks
    Rajakumar.K

    Hi,
    Follow the steps:
    1.Field---VFDAT and table-MCHA should be created as a charecter in CT04 and assigned to a class in CL02N.
    2.create MM01 and add the class to it in classification view.
    3.In mm01 plt storage1 view give data for remainning shelf life and total shelf life and in purchasing view activate batch management.
    4.OMJ5- activate SLED for your plant and mvt type 201.
    5.opj2- set BD for your plant.
    6.create sort sequence in cu70 and assign your charecteristic value to it.
    7.create batch serch strategy in MBC1 for access sequence(plt/matrl/mvt typ) create a condition record.
    8.Do a GR using 501 and enter SLED related details.(production date and exp date values)
    Repeat the above step and enter diffrent values for SLED details.
    So now two batches are created with SLED as the charecteristic.
    9.Do a GI using 201 mvt tye in MB1A and enter * in batch field(system will determine the batch using the SLED value basedon the criteria(ascending or descending which was set in the sort rule.)
    (or)
    view this thread
    Re: Batch Search
    Reg,
    Deepak

Maybe you are looking for

  • How to make a blank TOC.

    The TOC won't let me leave it blank.** The elements in the template are not delete-able. I want to get rid of it because my picture book opens up with thumbnails of the pages (in the TOC) instead of full sized pages.  Is there a fix for this? **Refer

  • Problem playing with Multicam editing using samples from Tom's FCP 5 book?

    I have some media from the DVD accompanying the book Final Cut Pro 5 Editing Workshop. There are 4 camera angles of a music trio but unfortunately there is only audio on Camera 1. This means that though I can switch video angles, the audio for about

  • Is it possible to remove leather styling in new iCal?

    Hi, I waited for new iCal so much, but now I just can not use it, it makes me sick to look at the top bar of iCal where you can see LEATHER styling. Is it possible to remove that? thank you

  • How to encrypt the backup that is taken by DPM

    Hi all, Our client is using DPM to backup his data, we need to provide him with a step by step guide on how to encrypt this backup by DPM, any help?

  • Cuando obtengo mi numero de serie?

    ¿alguien sabe si al hacer un pedido el tiempo de respuesta de procesamiento de 24 horas es tiempo real? ¿transcurrido ese tiempo enseguida me dan mi número de serie?