Reg: MMC of Solman

Problem:
in MMC solman server has been permanently stopped. I have checked out for Services, restarted the systems, but the server doesnt starts.
please give the solution
database SQL Server.

Hi,
Post the startsap log and stopsap log files and also dev_w logs.
Regards
Naveen

Similar Messages

SAP Solman MMC is not opening

Dear all,
i have tried to open SAP Solman MMC, i got the below error .
MMC cannot open the file c: \Documnets and setting\user\Windows\sapmmc.msc.
this may be because the file does not exit, is not an MMC console , or created by a later version of MMC. This may also be because you do not have sufficent access rights to the file .
NOTE : i have logged in SIDADM.
kindly advise
Regards

Dear all ,
now there is no issue to open MMC ,.
I have checked ABAP WP table , it is showing all the work processes and status for work process is waiting .
The same thing i have checked J2EE process table, it is showing there is no items to show in this view nad its not showing any process.
Kindly advise ,
Regards

Eroor while opening SOLMAN mmc(snap-in)

Hi,
I am balu my problem is when i am trying to open solman mmc it is showing an error "snap-in is failed to initialize" what should i do to rectify this problem,
please help me out.
Thank you

See my installation procedure at https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0f6978e-f73c-2a10-269f-93e8f0a13394
You might be missing a component, e.g., librfc32u.dll

REG: Solman_Setup Issue in SOLMAN 7.1

Hi All,
I have installed SolutionManager 7.1 and when performing the solution Manager configuration using the solman_setup, in the phase managed system configuration, we are struck in step user creation, with the error " /SDF/READ_USER_ASSIGNMENT does not exist" so date transfer possible. Aslo in the last step when we click on finish button we are getting the below error.
Checked the service mentioned in the error from sicf tcode, it is active. Could some one help me on this issue.
The URL call http://indblrp2p05.ad.infosys.com:8002/sap/bc/webdynpro/sap/wdsise_wizard_app was terminated because of an error.
Note
The following error occurred in system SOL : Access via 'NULL' object reference not possible.
The error occurred on application server INDBLRP2P05_SOL_02 and in work process 9 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RESET of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: RESET of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: RESET of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: EXIT of program CL_WDR_CONTROLLER=============CP
Method: EXIT of program CL_WDR_VIEW===================CP
Method: EXIT_VIEW of program CL_WDR_VIEW_MANAGER===========CP
Method: EXIT_CONTROLLER of program CL_WDR_INTERFACE_VIEW=========CP
Method: EXIT of program CL_WDR_CONTROLLER=============CP
Method: EXIT of program CL_WDR_VIEW===================CP
Method: EXIT_VIEW of program CL_WDR_VIEW_MANAGER===========CP

Hi Donald
Thanks for your response, we tried by assigning the roles mentioned by you and it worked for us.
But in the last step of Managed sysem configuration we are getting again the same error:
The URL call http://indblrp2p05.ad.infosys.com:8002/sap/bc/webdynpro/sap/wdsise_wizard_app was terminated because of an error.
Note
The following error occurred in system SOL : Access via 'NULL' object reference not possible.
The error occurred on application server INDBLRP2P05_SOL_02 and in work process 9 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RESET of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: RESET of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: RESET of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: EXIT of program CL_WDR_CONTROLLER=============CP
Method: EXIT of program CL_WDR_VIEW===================CP
Method: EXIT_VIEW of program CL_WDR_VIEW_MANAGER===========CP
Method: EXIT_CONTROLLER of program CL_WDR_INTERFACE_VIEW=========CP
Method: EXIT of program CL_WDR_CONTROLLER=============CP
Method: EXIT of program CL_WDR_VIEW===================CP
Method: EXIT_VIEW of program CL_WDR_VIEW_MANAGER===========CP
When we checked in sap system we got the following dump :
Category               ABAP Programming Error
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
ABAP Program           CL_WDR_CONTEXT_NODE_VAL=======C
Application Component BC-WD-ABA-RUN
Date and Time          09.12.2011 21:26:16
Short text
     Access via 'NULL' object reference not possible.
could you please help us in this issue.
Thanks
Mounika

SSO Application Configuration .msc - Unable to load mmc and unable to uninstall/repair

This tool was installed on a QA server by an ex-employee and nobody knows for sure if it ever worked. Attempting to uninstall/repair fails with below errors in the event log.
The description for Event ID 11001 from source MsiInstaller cannot be found. Either the component that raises this event is not installed on your local computer
or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Product: SSO Application Configuration -- Error 1001. Error 1001. Company Name is a required field.
(NULL)
(NULL)
(NULL)
(NULL)
The description for Event ID 11001 from source MsiInstaller cannot be found. Either the component that raises this event is not installed on your local computer
or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Product: SSO Application Configuration -- Error 1001. Error 1001. An exception occurred while uninstalling. This exception will be ignored and the uninstall will
continue. However, the application might not be fully uninstalled after the uninstall is complete. -->
Cannot delete a subkey tree because the subkey does not exist.
(NULL)
(NULL)
(NULL)
(NULL)
The tool is currently unusable. And worse, we cannot uninstall and re-install this tool. Please advise.

Hi,
Sadly i had the same issue trying to uninstall the SSO App Con...
I also could not repair the install due to another 1001 error.
Instead of uninstalling the program i found the registry file i needed to repair the install and imported it to my registry.
1 Open notepad and paste the following
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\MMC\SnapIns\FX:{ce255ef6-9e3d-42c8-b725-95ccc761b9d9}]
"UseCustomHelp"=dword:00000000
"Type"="Microsoft.ManagementConsole.Samples.ActionsSnapIn, SSOMMCSnapIn, Version=1.5.0.0, Culture=neutral, PublicKeyToken=null"
"ApplicationBase"="C:\\Program Files (x86)\\Microsoft Services\\SSO Application Configuration"
"ConfigurationFile"="SSOMMCSnapIn.dll.config"
"NameString"="SSO Application Configuration"
"Description"="Allows a BizTalk Administrator to Configure the SSO Configuration Store"
"Provider"="Microsoft"
"ModuleName"="SSOMMCSnapIn.dll"
"AssemblyName"="SSOMMCSnapIn"
"RuntimeVersion"="v2.0.50727"
"FxVersion"="3.0.0.0"
"About"="{00000000-0000-0000-0000-000000000000}"
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\MMC\SnapIns\FX:{ce255ef6-9e3d-42c8-b725-95ccc761b9d9}\NodeTypes]
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\MMC\SnapIns\FX:{ce255ef6-9e3d-42c8-b725-95ccc761b9d9}\Standalone]
2 Save file as .reg
3 Open regedit.exe and import the saved <filename.reg>
This should allow you to use the SSO App Conf.. again.
I hope this helped.

"Table VSEOPARENT is not in the database" after SolMan system copy to x64

Hi SDNners,
We've just completed a system copy of our SolMan 3.1 system onto a new
(Xeon x64 based) server. This system copy is part of the process of
moving SolMan 3.1 from an old server onto 64bit hardware and then
upgrading it to SolMan v4 and Oracle 10G.
Although the system appears to start properly in the MMC, we are unable
to log into the system through SAPGUI - we get a SYNTAX_ERROR window
instead of a logon screen.
I've checked the SysLog from within the MMC and noticed a number of
errors stating:
Database: Table VSEOPARENT is not in the database
Database: Table VSEOIFIMPL is not in the database
Database: Table VSEOIFCOMP is not in the database
I tried running SQL command 'select * from "SAPSOL"."VSEOPARENT"; and
it confirmed that the table didn't exist. I then ran the same command
on the source SolMan system and it showed that VSEOPARENT DID exist. I
don't understand how these VSEO* tables could have gone missing between
the source and target systems.
I've searched OSS for VSEO* and cannot find anything. Please help!
Thanks,
Arwel.

We have 640 kernel, ECC 5.0 and BASIS patch 23.
For me the problem was with SAPVIEW table wasnt imported from source to target becuase SAPVIEW.STR file was 0 byte. STR files gets created in export preparation phase.
It did happen because on source side master DVD, there was no option for export preparation. I had only option for tablesplit and export db.
I did use ECC 5.0 SR2 Master DVD which had option for export preparation phase and that created SAPVIEW.STR file.
Using migration monitor I did re-export and re-import and this time all views are imported in target.
Regards,
Mamadi.

Error while installing SAP MMC

Hello All,
Iam trying to install SAP MMC where Windows userid/pwd to be created is SAPServiceF03/abc123. In my company because of the password security policy I cant create a password abc123 for the windows OS user SAPServiceF03. The installer aborts the installation with the following error -
<b>create Service user: SAPServiceF03
with password: abc123
with options: /add /WORKSTATIONS:B41F090
The password does not meet the password policy requirements. Check the minimum password length, password complexity and password history requirements.</b>
Please help ASAP..Is there any work arounds?
Regards,
Dhanya

Hi,
Thanks for your response!
The installer expects userid and password only in the format SAPServiceF03/abc123. Is there any xml file, where we could edit the password bypassing the windows set password?
Regs,
Dhanya

How to Create Support Message with no SolMan User

Hi all,
I would like to test if it is possible to create a support message from ECC system, if the same user do not have a SolMan user.
Now, in few other threads, like
Creation of support message in SolMan without having user id in SolMan
Re: Do End User Require Login in Solman to raise Support Messages !!
show to the user there support message list
e.t.c.
it is clearly stated: it is possible.
I have done the next steps:
In ECC:
- created a test user
- assighned him a "sap_all" profile (and "Z_SAP_SV_FDB_NOTIF_BC_CREATE" role) + user comparasion
- assighned him a "Z_SAP_S_RFCACL" role + user comparasion
In Solman:
- No user created
- In TX DNO_CUST04 the Field Name "NO_USER_CHECK" is maintained with the value "X".
- In tx BP business partner is created as a general BP, with valid external SYS ID no (other users with both ECC and SM user are OK), and changed to "employee" with ECC username defined.
Now, the problem is when I try to create a support message as a test user in ECC, I get an error:
"Error in Local Message System: No authorization to logon as trusted system (Trust Message was Not Created"
All I could find is the tread:
solution maanger issue
and this one is basicly different:
the mentioned user has both ECC and SM user.
And one of the answers was the user must have S_RFCACL roles in BOTH ECC ans SM systems...
In ST22 (in solman) I get error description:
" An RFC call (Remote Function Call) was sent with the invalid user ID
"TEST_T01230 "
. Or the calling system is not registered as trusted system in the
target system."
Now, the calling system IS regged as a trusted sys (as I mantioned - other users with both ECC and SM users can send supp. msgs)
So - the only answer is "invalid user ID".
The short message is
" No authorization to logon as trusted system (Trusted RC=0)"
and the trusted return codes ( 0 ) have the following meaning: Invalid logon data (user ID and client) for the trusting system.
So. how can I perform trusted Logon with no user in SM?
Thank you in advance,
cheers
Nenad

Hi again,
thank you for your help.
At first I thought you meant *_back dest. directly in SM, and now I see you ment to use SMSY to go to ECC sys, and maintain the RFC conns on ECC diredtly from SMSY, "clean-up RFC Destinations". Yes, can do
So:
The problem is solved.
I deleted the *_back user from ECC to SM, and re-generated the connection with default system pre-defined user SMB_T01. (it is interesting that SU01 reports - user SMB_T01 does not exist)
I even deleted a SRFCACL role from the test user in ECC, and the user was still able to create the support message (certanly he was, as he uses a *:back rfc with SMB_T01to log on to SM)
So, resume:
To be able to create / send a support message from another system, with no user in SolMan, it is needed:
- a user in other system with roles needed for everyday work, + "Z_SAP_SV_FDB_NOTIF_BC_CREATE" role;
- a not trusted SM_<SID>CLNT<CLNT_NB>_BACK rfc connection from satelite system to SolMan, with defined logon user (with apropriate authorisations) - generated by the system.
- the BCOS_CUST table in ECC system should be onfigured like: OSS_MSG W SM_<SID>CLNT<CLNT_NB>_BACK CUST 620 1.0
- a Business Partner for user in SM with identification number for system from where the massege will be sent from. (the user can send the note with out this condition, but the "created by" field in message will be empty in that case)
Once again thank you,
cheers,
Nenad
Case closed.
Edited by: Nenad nikolic on Mar 23, 2010 10:54 AM
Edited by: Nenad nikolic on Mar 23, 2010 10:57 AM

[SOLVED] What is the minimum .reg configuration for monting eMMC2??

Hello Friends,
Greetings for the day!!
As, I have a board that contains the eMMC2(slot=3). We have made some changes in the driver for make it capable for slot=3. Now, the turn of .reg files. We have made all the required entries for Driver\BuiltIn\SDHC3. And driver is taking the values correctly.
Now the part of remaining entries related to file system, profiles, partition, partition table etc
I have made entries are as -
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles]
"AutoMount"=dword:1
"AutoPart"=dword:1
"AutoFormat"=dword:1
"MountFlags"=dword:1
"DefaultFileSystem"="FATFS"
"PartitionDriver"="mspart.dll";; -- Required
"Folder"="";; -- Required
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\eMMC]
"Name"="MMC Card"
"Folder"="MMC_CARD" ;MC Card
"AutoMount"=dword:1
"AutoPart"=dword:0
"AutoFormat"=dword:0
"DefaultFileSystem"="FATFS"
"PartitionDriver"="mspart.dll"
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\eMMC\FATFS]
"Flags"=dword:14
"FormatTfat"=dword:1
"DisableAutoScan"=dword:1
"FormatNumberOfFats"=dword:2
"EnableWriteBack"=dword:1
;;"CheckForFormat"=dword:1
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\eMMC\Part00]
"Folder"="MMC_Part"
"AutoPart"=dword:1
"MountPermanent"=dword:1
;; "AutoMount"=dword:1
"BootPhase"=dword:1
"MountHidden"=dword:1
"MountAsBootable"=dword:1
"MountAsRoot"=dword:0
"MountSystem"=dword:1
"AutoPart"=dword:0
[HKEY_LOCAL_MACHINE\System\StorageManager\Autoload\fsdmgr]
"Dll"="fsdmgr.dll"
"Paging"=dword:1
"LoadFlags"= dword:1
I have read lot of document related to the issue that eMMC2 is not mounted for most of the persons. In every document I have observed that they are using different keys and keys values.. I am confused that what is the minimum keys and keys values required
for the eMMC2 to be mounted apart from driver level.... ???
With this values my logs are as -
13525 PID:400002 TID:2300006 SDBusDriver: The SDIO card does not support block mode. Use Soft-Block instead.
13527 PID:400002 TID:4bc0002 AddFonts(.ttf) returned 4 fonts
13527 PID:400002 TID:4bc0002 AddFonts(.ttc) returned 0 fonts
13528 PID:400002 TID:4bc0002 AddFonts(*) returned 4 fonts
13529 PID:400002 TID:4bc0002 AddAllEUDCFonts(tte) returned 0 fonts
13531 PID:400002 TID:2300006 SetInterface MMCHS_HCTL value = F02
13531 PID:400002 TID:2300006 SDSetCardInterfaceForSlot - HC ClockRate differs desired setting: desired: 20000000 Hz, Actual : 19200000 Hz
13532 PID:400002 TID:2300006 The clock rate is set to 19200000
13533 PID:400002 TID:2300006 HandleAddDevice: LoadDevice type = 1, slot 0
13540 PID:400002 TID:2300006 OSAXST1: >>> Loading Module 'sdmemory.dll' (0x9E474C58) at address 0xEEB10000-0xEEB2A000 in Process 'NK.EXE' (0x8711FAD0)
PB Debugger Loaded symbols for 'C:\WINCE700\OSDESIGNS\ENVENTURE\ENVENTURE\RELDIR\PHYTEC_AM335X_BSP_ARMV7_DEBUG\SDMEMORY.DLL'
13591 PID:400002 TID:2300006 SDMemory: +SMC_Init
13591 PID:400002 TID:2300006 SDGetDeviceHandle: ActivePath: Drivers\Active\32
13593 PID:400002 TID:2300006 SDGetClientFunctions: +Init
13594 PID:400002 TID:2300006 SDGetClientFunctions: -Init
13596 PID:400002 TID:2300006 SDMemCardConfig: Card is high capacity (2.0+)
13596 PID:400002 TID:2300006 SDMemCalcDataAccessClocks: Tpd:f ns, Asynch: f ns, AsyncClocks:0 , SyncClocks: 1078591488, ReadTotal: 0, Write Factor: 1099109072 WriteTotal: 769230
13597 PID:400002 TID:2300006 SDMemory: Initialize: Using block transfer size of 64 blocks
13598 PID:400002 TID:2300006 SDMemory: Idle Timeout: 2000 Idle Power State: 2
13599 PID:400002 TID:2300006 SDMemory: Power Management Setup complete
13599 PID:400002 TID:2300006 SDMemory: -SMC_Init
13602 PID:400002 TID:8b0002 SDMemory: GetDeviceInfo - Profile = eMMC, length = 10
13602 PID:400002 TID:8b0002 SDemory: GetDeviceInfo - RegQueryValueEx(Profile) returned 2
13603 PID:400002 TID:8b0002 SDMemory: GetStorageID Insufficient buffer space
SDMemory: -GetStorageID
13608 PID:400002 TID:8b0002 Partition Part00 NumSectors=15106032
13608 PID:400002 TID:8b0002 MSPART!PD_OpenPartition: dwStoreId=AB543350, PartName=Part00
13617 PID:400002 TID:8b0002 CreateCache: Successful. Cache Size: 256 KB, Start: 6, End: 29453, CreateFlags: 2.
13619 PID:400002 TID:8b0002 CreateCache: Successful. Cache Size: 256 KB, Start: 29454, End: 15106031, CreateFlags: 2.
13627 PID:400002 TID:4bc0002 LogFontFromRegistry(SYSTEM\GWE\Menu\BarFnt), lfHeight = -12
13628 PID:400002 TID:4bc0002 LogFontFromRegistry(SYSTEM\GWE\Menu\PopFnt), lfHeight = -12
Anyone can tell me that what is the minimum .reg entries that is required to mount the eMMC2 ????

Hello Friends,
I am happy to intimate you that I have self solved the above problem with minimal configuration as shown below -
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles]
"AutoMount"=dword:1
"AutoPart"=dword:0
"AutoFormat"=dword:0
"MountFlags"=dword:0
"DefaultFileSystem"="FATFS"
"PartitionDriver"="mspart.dll";; -- Required
"Folder"="";; -- Required
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\eMMC]
"Name"="MMC Card"
"Folder"="MMC_CARD" ;MC Card
But, atleast you have to find the tool that format and create single partition as per your requirement ...

Solution Manger Sap MMC, disp+work process says message server unreachable

Hi Folks, I have installed Solution Manager on Windows 2003, 3GB ram, 300 Gigs, installation completed success fully, after installation i worked on post-installation, like client creation, setting up solution monitoring, logon.._sap* to 0. After I have restarted the solman, in the Sap MMC says dispwork running but message server not connected, and after few moments dispwork stopped.
I think its due to memory allocation for ABAP stack, i searched for this problem, but i didnt find good solution. Any body could sugges me in working out this problem, and also may be in the profiles folder, if there's any thing which i can add parameters for abap/buffer or abap/heap size.
Hope some could try to resolve this.
Thank you.

check fist the trace files dev_disp and dev_w0 if you really have a memory problem.
If yes:
- add /3GB /PAE /USEVA:2600 to your boot.ini and restart
- check if you need to rebase DLLs (note 664269 - Rebasing DLLs under WFP)
To avoid all those memory problems I suggest to go for 64bit platform.
Markus

Problem in XI/Solman

I have XI and Solman installed on one Server.
Due to some reason I have restarted the server and now all the XI related services are getting started through MMC, but while starting Solman, the service IGSWD.EXE is not getting started. I have searched on net but couldn't find any solution.
I have checked the Profile parameters also that are given in some forums for this solution.
Please help me....
Thanks and Regards
Puneet

Hey,
chk out this thread
"Scheduled for Outbound processing" message
regards
jithesh

Any standard RFC there to communicate between satellite system and Solman?

Hi Gurus,
Any standard RFC there to communicate between satellite system and Solman?
Thanks in advance.
Regs,
BBR.

following four RFCs are created so as to initiate the communication between the satellite system and the solman system
_READ, _TRUSTED, _BACK, _TMW
but, you have to Read the Links and the Notes too to understand their names and their meaning
http://help.sap.com/saphelp_sm310/helpdata/en/48/647e3ddf01910fe10000000a114084/content.htm
http://help.sap.com/saphelp_sm310/helpdata/en/b3/dd773dd1210968e10000000a114084/frameset.htm
http://www.slideshare.net/wlacaze/sap-solman-instguide-initial-customizing-presentation

How to install diagnostic agent for nw 7.0sp17, with solman ehp1- sp25

Hi Gurus,
we are using NW 7.0 Enterprise portal at SP17, want to configure E2E. So installed solution manager 7.0 EHP1 SPS 25.
Ran the Guided procedure solman_setup successfully. with intitial config, basic config and pending at managed system config.
Here my question is:
do i need to install smd agent on solman? or solman itself comes with agent. i cannot see any agent in mmc on solution manager.
What is SOLMANDIAG and SOLMAN AGENT, SMD Agent and Host agent.
The guide (https://websmp207.sap-ag.de/~sapidb/011000358700000952852009E) says before install SMD agent, install host agent, diagnostics agents are available 7.11 on wards, while installing smd agent sapinst asking SAP Unicode Kernel 711 , but currently my NW Portal system is using kernel 7.0..
Any guide, how to proceed for E2E on nw7.0 SP17 with solman ehp1 sp25( highest availale spack)
Thanks in advance.
Regards
Balaji

Hi Balaji,
As per the SMD agent 7.11 installation guide (https://service.sap.com/~sapidb/011000358700000952852009E) , Page 6 and 8, you would need to download the standard NW 7.11 DVDSs( usually kernel and Installation master) and SMD agent installation packages from the SMP. Location is mentioned in the guide as well.
For your query that Portal is based in i386, these are two different things. The SMD Agent will be installed with its own kernel and also 7.11 kernel is not support edon 32bit. However the SMD agent will use its own 7.11 64bit kernel and Portal will use its i386 kernel. Hopefully your hardware is able to support both. I recommend to proceed with x86_64 7.11 kernel for your SMD installation. Incase the hardwar does not support this, go for alower release of SMD Agent wherein the kernel supports 32 bit hardware.
Best Regards,
Srikishan

How to turn on Ricoh SD/xD/MMC in Satellite A300 @ Ubuntu Intrepid Linux?

Hi
I have a Laptop Toshiba Satellite A300 1M1 PSAGCE
and I installed Ubuntu Intrepid with kernel 2.6.27.11 (I did this not
because Linux is better, free and faster than Vista... I did this
because I work with computational simulation, and I need Linux in this
machine).
Unfortunately one resource is not working: Ricoh SD/xD device.
But it is identified by the Linux kernel and it has modules loaded to be controlled (I suppose).
What I must do to get working my xD/SD/MultiMedia Card? (I put a xD card, and there is no message in the log).
My log, hardware and modules are:
_# SDHCI log messagens:_
bq. +$ dmesg | grep -i sdhci+ \\+sdhci: Secure Digital Host Controller Interface driver+ \\ + sdhci: Copyright(c) Pierre Ossman+ \\ + sdhci-pci 0000:04:06.1: SDHCI controller found [1180:0822|http://forums.computers.toshiba-europe.com/forums/] (rev 22)+ \\ + sdhci-pci 0000:04:06.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17+ \\ + sdhci-pci 0000:04:06.1: Will use DMA mode even though HW doesn't fully claim to support it.+ \\ + mmc0: SDHCI controller on PCI --0000:04:06.1-- using DMA+
_# SDHCI modules:_
bq. +$ lsmod | grep -i sdhci+ \\ + sdhci_pci 17024 0+ \\ + sdhci 27396 1 sdhci_pci+ \\ + mmc_core 67168 1 sdhci+
_# RICOH pci information:_
bq. +$ lspci | grep -i ricoh+ \\+04:06.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)+ \\+04:06.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)+ \\+04:06.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)+ \\+04:06.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)+
_# 04.06.X pci information in log:_
bq. +$ dmesg | grep -i "04:06"+\\+PCI: 0000:04:06.0 reg 10 32bit mmio: [d3100000, d31007ff]+ \\ +pci 0000:04:06.0: supports D1+ \\ +pci 0000:04:06.0: supports D2+ \\ +pci 0000:04:06.0: PME# supported from D0 D1 D2 D3hot D3cold+ \\ +pci 0000:04:06.0: PME# disabled+ \\ +PCI: 0000:04:06.1 reg 10 32bit mmio: [d3100a00, d3100aff]+ \\ +pci 0000:04:06.1: supports D1+ \\ +pci 0000:04:06.1: supports D2+ \\ +pci 0000:04:06.1: PME# supported from D0 D1 D2 D3hot D3cold+ \\ +pci 0000:04:06.1: PME# disabled+ \\ +PCI: 0000:04:06.2 reg 10 32bit mmio: [d3100900, d31009ff]+ \\ +pci 0000:04:06.2: supports D1+ \\ +pci 0000:04:06.2: supports D2+ \\ +pci 0000:04:06.2: PME# supported from D0 D1 D2 D3hot D3cold+ \\ +pci 0000:04:06.2: PME# disabled+ \\ +PCI: 0000:04:06.3 reg 10 32bit mmio: [d3100800, d31008ff]+ \\ +pci 0000:04:06.3: supports D1+ \\ +pci 0000:04:06.3: supports D2+ \\ +pci 0000:04:06.3: PME# supported from D0 D1 D2 D3hot D3cold+ \\ +pci 0000:04:06.3: PME# disabled+ \\ +ohci1394 0000:04:06.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17+ \\ +ohci1394 0000:04:06.0: setting latency timer to 64+ \\ +sdhci-pci 0000:04:06.1: SDHCI controller found [1180:0822] (rev 22)+ \\ +sdhci-pci 0000:04:06.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17+ \\ +sdhci-pci 0000:04:06.1: Will use DMA mode even though HW doesn't fully claim to support it.+ \\ +mmc0: SDHCI controller on PCI [0000:04:06.1] using DMA+
Thank you for your attention.
Message was edited by: RafaelBarreto

Hello
Have you tried to find answer on some Linux forum?
Toshiba doesnt support Linux for this notebook model and I don't believe someone here can help.
If you will find some useful info please post it here.
Good luck!

Business process reg. SAP in retail or multichain sales

Hi,
Can u tell the business process reg. SAP in retail or multichain sales ?
RAAJ

Hello László,
in a nutshell BPM Netweaver is focussing on so called edge-processes (usually
SOA-based and often workflow related). These edge-processes a thought to enhance exisitng core business processes and should provide the fast competitive edge versus competitors. Examples would be also xApps. For this Netweaver provides process modelling tools, where you can get exectuable code through the integration between CE and PI. The monitoring part for these processes is mainly targeting business end-users and business manager.
Business Process Monitoring with Solution Manager focusses on core business processes which are realized with the "conventional", "old" SAP Architecture, e.g. Order-to-Cash or Procure-to-Pay. You get a combination of technical monitors (average response times of transactions, background job runtimes, monitors for IDOC or qRFC processing) and application related monitors (you get more than 200 pre-configured application monitors out-of-the-box like number of overdue customer orders or outbound deliveries or number of deliveries with goods issue posted but no invoice). The target group here is the support organization of the customer, from Basis-Support over application support on IT side to process owner on business department side.
Overview presentations can be found under
https://service.sap.com/bpm --> Media Library --> Customer Information -->
"Business Process Monitoring - Part 1 & 2".
Or look under https://www.sdn.sap.com/irj/sdn/nw-processmonitoring
In the end BPM Netweaver and BPMon SolMan are complementary for different purposes and different target groups.
Best Regards
Volker

Reg: MMC of Solman

Similar Messages

Maybe you are looking for