Reg module pool programming
Hi,
iam developing object on modulepool.
can u pls send examples objects on modulepools.
thank
hi ,
Here you go ....
Creation of table controls in mpools
Here you go with the complete steps for creating module pool programs using table control:
open se51, choose the icon like a table for table control . drag it and then place it in your screen . click on F6 and you will get a screen where youi need to provide the table name / field name that ( fields ) you are going to use in the screen and table control. after giving the ztable name click on get it from dictionary . you will get the list of available fields in a table. next choose the fields you wish to place in the table control , and if you want to place all fields in your table control then select every fields . after this you will get a structure which you should drag place inside the table control area .
double click on the table control , set the proper attributes, tickmark the horizontal and vertical scroll bars to appear in your TC in the screen . save , check and activate ..
following are the sample code you should follow to display datas in your table control ..
write the following code in the flow logic of the screen ............
process before output.
module tc_01_init.
loop at g_tc_01_itab
into g_tc_01_wa
with control tc_01
cursor tc_01-current_line.
module tc_01_move.
module tc_01_get_lines.
endloop.
module status_0001.
process after input.
loop at g_tc_01_itab.
chain.
field sflight-carrid.
field sflight-connid.
field sflight-fldate.
module tc_01_modify on chain-request.
endchain.
endloop.
module tc_01_user_command.
Write the following code in your Zmodulepool program !!
program z_tst_mpool_tc_01.
data: begin of l_tab_sflight occurs 10,
carrid like sflight-carrid,
connid like sflight-connid,
fldate like sflight-fldate,
end of l_tab_sflight.
tables: sflight.
types: begin of t_tc_01,
carrid like sflight-carrid,
connid like sflight-connid,
fldate like sflight-fldate,
end of t_tc_01.
data: g_tc_01_itab type t_tc_01 occurs 0,
g_tc_01_wa type t_tc_01. "work area
data: g_tc_01_copied. "copy flag
controls: tc_01 type tableview using screen 0001.
data: g_tc_01_lines like sy-loopc.
data: ok_code like sy-ucomm.
include z_tst_mpool_tc_01_pbo .
include z_tst_mpool_tc_01_pai .
include z_tst_mpool_tc_01_incl01 .
include z_tst_mpool_tc_01_status_0001.
include Z_TST_MPOOL_TC_01_PBO .
inside include
module tc_01_init output.
if g_tc_01_copied is initial.
select * from sflight
into corresponding fields
of table g_tc_01_itab.
g_tc_01_copied = 'X'.
refresh control 'TC_01' from screen '0001'.
endif.
endmodule.
module tc_01_move output.
move-corresponding g_tc_01_wa to sflight.
endmodule.
module tc_01_get_lines output.
g_tc_01_lines = sy-loopc.
endmodule.
Revert if further assistance needed ...
Regards,
Ranjita
Similar Messages
-
Reg : Variant saving for Module Pool Programming
Hey Friends,
Plz help me in how to create variant for Module Pool Programming as in normal reports.Thanx in advance.Hi,
You can create variants for Module pool program using the transaction SHD0. You can create Screen variants for your screens using this Tcode.
Go to SHD0 -> Give the Transaction code(ZTRAN) for which you want to create a variant -> name of some variant (ZVAR) -> create -> takes you to your transaction -> Give the values that you want to be displayed as variants -> Click on Save -> Opens a pop up to confirm the screen entries -> Check the check boxes of those fields that you have entered the data with (the column with check boxes that says W.Content) -> Exit and Save -> Save the variant -> You can see a screen variant created (ZVAR_0100)
Now Goto -> Create variant transaction -> Give your transaction variant name (ZVAR) -> Select Transaction with variant -> Takes you to SE93 transaction -> Give the transaction variant name -> save. Run with the created transaction.
Edited by: Nitwick on Jul 27, 2009 4:49 PM -
How to delete the row in table control with respect to one field in module pool programming?
Hi,
Can I know the way to delete the row in table control with respect to one field in module pool programming
Regards
Darshan MSHI,
I want to delete the row after the display of table control. I have created push button as delete row. If I click on this push button, the selected row should get deleted.
I have written this code,
module USER_COMMAND_9000 input.
DATA OK_CODE TYPE SY-UCOMM.
OK_CODE = SY-UCOMM.
CASE OK_CODE.
WHEN 'DELETE'.
LOOP AT lt_source INTO ls_source WHERE mark = 'X'.
APPEND LS_SOURCE TO LT_RESTORE.
DELETE TABLE LT_SOURCE FROM LS_SOURCE.
SOURCE-LINES = SOURCE-LINES - 1.
ENDLOOP.
But I'm unable to delete the selected rows, It is getting deleted the last rows eventhough I select the other row.
So I thought of doing with respect to the field. -
Getting error while calling a subscreen in module pool program
HI ALL,
ACTUALLY I'M GETTING A SYNTAX ERROR WHILE I'M CALLING A SUBSCREEN
IN A MODULE POOL PROGRAM IN PAI MODULE
THE ERROR IS AS FOLLOW
"." or "ID ... FIELD ..." expected after "SUBSCREEN"
CAN ANYBODY PLS HELP ME.
REGARDS
ANDREWSHI MAX ,
THE CODE IS AS FOLLOWS:
*& Report ZTABSTRIP_PS
REPORT ZTABSTRIP_PS.
type-pools : vrm.
DATA:number1 type I,
number2 type I,
result type I,
ok_code like SY-UCOMM,
employee1 type c,
ABAP(19) type c,
SALES(19) type c,
HR(19) type c,
MM(19) type c,
employee type c.
emp type c.
CONTROLS tabstrip TYPE TABSTRIP.
CALL SCREEN 100.
call screen 110.
call screen 130.
call screen 120.
call screen 140.
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'STATUS'.
SET TITLEBAR 'TITLE'.
CASE OK_CODE.
WHEN 'BACK' or 'EXIT' or 'DELETE'.
leave program.
WHEN 'SAVE'.
MESSAGE 'please choose a valid function' TYPE 'I'.
WHEN 'BACK'.
leave PROGRAM.
when 'EXIT' or 'DELETE'.
leave to screen 0.
WHEN 'SAVE'.
MESSAGE 'please choose a valid function' TYPE 'I'.
endcase.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
CASE OK_CODE.
when 'TAB1'.
tabstrip-activetab = 'TAB1'.
when 'TAB2'.
tabstrip-activetab = 'TAB2'.
result = number1 + number2.
when 'TAB3'.
tabstrip-activetab = 'TAB3'.
SET TITLEBAR 'TITLE1'.
when 'TAB4'.
tabstrip-activetab = 'TAB4'.
if employee = 'NEERAJ'.
ABAP = 'NEERAJ'.
elseif employee = 'UMESH'.
SALES = 'UMESH'.
ELSEIF employee = 'RAM'.
HR = 'RAM'.
elseif employee = 'ANIL'.
MM = 'ANIL'.
endif.
employee = employee.
WHEN 'BACK'.
leave PROGRAM.
when 'EXIT' or 'DELETE'.
leave to screen 0.
WHEN 'SAVE'.
MESSAGE 'please choose a valid function' TYPE 'I'.
ENDCASE.
WHEN 'BACK' or 'EXIT' or 'DELETE'.
leave program .
WHEN 'SAVE'.
MESSAGE 'please choose a valid function' TYPE 'I'.
endcase.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0110 OUTPUT
text
**MODULE STATUS_0110 OUTPUT.
SET PF-STATUS 'STATUS1'.
SET TITLEBAR 'xxx'.
**case ok_code.
**WHEN 'back' or 'exit' or 'delete'.
leave PROGRAM.
WHEN 'save'.
MESSAGE 'please choose a valid function ' TYPE 'W'.
ENDCASE.
**ENDMODULE. " STATUS_0110 OUTPUT
*& Module USER_COMMAND_0110 INPUT
text
MODULE USER_COMMAND_0110 INPUT.
number1 = number1.
number2 = number2.
CLEAR NUMBER1.
CLEAR NUMBER2.
REFRESH NUMBER1.
REFRESH NUMBER2.
ENDMODULE. " USER_COMMAND_0110 INPUT
*& Module STATUS_0130 OUTPUT
text
MODULE STATUS_0130 OUTPUT.
SET PF-STATUS 'STATUS2'.
SET TITLEBAR 'xxx'.
RESULT = number1 + number2.
*CLEAR RESULT.
REFRESH RESULT.
ENDMODULE. " STATUS_0130 OUTPUT
*& Module STATUS_0120 OUTPUT
text
MODULE STATUS_0120 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
DATA: l_name TYPE vrm_id,
li_list TYPE vrm_values,
l_value LIKE LINE OF li_list.
l_value-key = '1'.
l_value-text = 'ANIL'.
APPEND l_value TO li_list.
CLEAR l_value.
CLEAR li_list.
l_value-key = '2'.
l_value-text = 'RAM'.
APPEND l_value TO li_list.
CLEAR l_value.
CLEAR li_list.
l_value-key = '3'.
l_value-text = 'NEERAJ'.
APPEND l_value TO li_list.
CLEAR l_value.
CLEAR li_list.
l_value-key = '4'.
l_value-text = 'UMESH'.
APPEND l_value TO li_list.
CLEAR l_value.
CLEAR li_list.
l_name = 'employee'.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
ID = l_name
VALUES = li_list
EXCEPTIONS
ID_ILLEGAL_NAME = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR li_list.
ENDMODULE. " STATUS_0120 OUTPUT
*& Module USER_COMMAND_0120 INPUT
text
MODULE USER_COMMAND_0120 INPUT.
INCLUDING sy-repid '140'.
employee1 = employee.
IF employee1 CS 'NEERAJ'.
call SUBSCREEN sub4 .
ABAP = 'NEERAJ'.
CLEAR ABAP.
ELSEIF employee1 CS 'UMESH'.
call SUBSCREEN sub4 .
SALES = 'UMESH'.
CLEAR SALES.
elseif employee1 CS 'RAM'.
call SUBSCREEN sub4 .
HR = 'RAM'.
CLEAR HR.
ELSEIF employee1 CS 'ANIL'.
call SUBSCREEN sub4 .
MM = 'ANIL'.
CLEAR MM.
endif.
ENDMODULE. " USER_COMMAND_0120 INPUT
*& Module STATUS_0140 OUTPUT
text
MODULE STATUS_0140 OUTPUT.
*CASE OK_CODE.
WHEN employee1 'NEERAJ'.
screen-active = 1.
ABAP = 'NEERAJ'.
WHEN employee1 = 'UMESH'.
screen-active = 1.
SALES = 'UMESH'.
WHEN employee1 = 'RAM'.
screen-active = 1.
HR = 'RAM'.
WHEN employee1 = 'ANIL'.
screen-active = 1.
MM = 'ANIL'.
endif.
*ENDCASE.
ENDMODULE. " STATUS_0140 OUTPUT -
Can we use Initilization event in module pool program?
Hi All,
Can we use Initialization event in module pool program? If not why?
Thanks In Advance!!!!!!!!!The runtime environment creates the INITIALIZATION event and calls the corresponding event block (if it has been defined in the ABAP program).
http://help.sap.com/saphelp_nw70/helpdata/EN/fc/eb2d67358411d1829f0000e829fbfe/content.htm
SEE THE ABOVE LINK...THINK IT WILL SOLVE ALL YOUR DOUBTS
REGARDS
RACHEL -
Use of "Pool Table(s)" in Module Pool Program
Hi,
I often see/hear that Pool tables play an important role in Module Pool Programs.
anybody please explain me how Pool tables are used in Module Pools?? => Did you look for any documentation?
if possible with code snippets. =>NO.
Thanks,
Kranthi.
Edited by: kishan P on Nov 14, 2010 7:23 PMHi,
I often see/hear that Pool tables play an important role in Module Pool Programs.
anybody please explain me how Pool tables are used in Module Pools?? => Did you look for any documentation?
if possible with code snippets. =>NO.
Thanks,
Kranthi.
Edited by: kishan P on Nov 14, 2010 7:23 PM -
How to call a "Z"module pool program in a "z"report
Hi Guys,
I have two reports .
1. Report : uploads a tab delimited " .Txt1" file and update the "z1" table
".TXT1" : File contains 4 fields
2. Module pool. :Uploads a a tab delimited " .Txt2" file and update another "z2" table
".TXT2" file contains the 4 fileds of ".TXT1" and also 2 extra fields.
I want to merge (call) the module pool program in the Report and perform the upload function using only one ".TXT" file.Please do guide me precisely .
*Report:*
REPORT zrswbgcs009 NO STANDARD PAGE HEADING MESSAGE-ID zwb
LINE-SIZE 185.
TABLES: zgcs_foc. "FOC Parts Table
*data count buffer
DATA: read_cnt(6) TYPE p, "Find read record
update_cnt(6) TYPE p, "OK record
error_cnt(6) TYPE p. "Error record
*file buffer(FOC)
DATA: BEGIN OF FOC_inrec OCCURS 0,
CUSTOMER(10), "Customer
PART_CODE(18), "Parts Code
REF_NO(35), "Ref No.
REF_DATE(10), "Ref Date
QTY(12), "Parts Qty
TEXT(100), "Remark
END OF FOC_inrec.
*file buffer
DATA: BEGIN OF inrec OCCURS 0,
CUSTOMER(10), "Customer
PART_CODE(18), "Parts Code
REF_NO(35), "Ref No.
REF_DATE(10), "Ref Date
QTY(12), "Parts Qty
PRICE(15), "Parts Price
WAERK(5), "Parts Currency
TEXT(100), "Remark
END OF inrec.
DATA : v_file LIKE rlgrap-filename.
DATA gt_zgcs_foc LIKE zgcs_foc OCCURS 0 WITH HEADER LINE.
DATA gs_zgcs_foc LIKE zgcs_foc.
*File name ACCEPT--------------------------------------------------
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
*Company code
PARAMETERS: p_comp LIKE zgcs_imei-company OBLIGATORY.
PARAMETERS: pcfile LIKE rlgrap-filename OBLIGATORY LOWER CASE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 1.
PARAMETERS: HQfile RADIOBUTTON GROUP b2.
SELECTION-SCREEN COMMENT 7(20) text-101 FOR FIELD HQfile.
SELECTION-SCREEN POSITION 31.
PARAMETERS: SUBfile RADIOBUTTON GROUP b2.
SELECTION-SCREEN COMMENT 37(20) text-102 FOR FIELD SUBfile.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF BLOCK box WITH FRAME.
SELECTION-SCREEN: COMMENT /2(40) text-011, COMMENT 42(40) text-001,
ULINE,
COMMENT /2(40) text-012, COMMENT 42(40) text-002,
COMMENT /2(40) text-013, COMMENT 42(40) text-003,
COMMENT /2(40) text-014, COMMENT 42(40) text-004,
COMMENT /2(40) text-015, COMMENT 42(40) text-005,
COMMENT /2(40) text-016, COMMENT 42(40) text-006,
COMMENT /2(40) text-017, COMMENT 42(40) text-007,
COMMENT /2(40) text-018, COMMENT 42(40) text-008,
COMMENT /42(40) text-009.
SELECTION-SCREEN END OF BLOCK box.
* -- AT SELECTION SCREEN ON
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pcfile.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_filename = space
def_path = 'C:\'
mask = ',*.txt,*.TXT.'
mode = 'O'
title = ' '
IMPORTING
filename = pcfile
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
*-----------------------------start--------------------------------
START-OF-SELECTION.
CLEAR: read_cnt, update_cnt, error_cnt.
REFRESH gt_zgcs_foc. CLEAR gs_zgcs_foc.
PERFORM file_upload_from_pc.
SORT gt_zgcs_foc.
DELETE ADJACENT DUPLICATES FROM gt_zgcs_foc
COMPARING COMPANY CUSTOMER PART_CODE REF_NO REF_DATE.
*// customer code check
DATA: LT_ZESTD LIKE ZESTD OCCURS 0 WITH HEADER LINE.
IF NOT gt_zgcs_foc[] IS INITIAL.
SELECT COMPANY CUSTOMER CURRENCY
INTO CORRESPONDING FIELDS OF TABLE LT_ZESTD
FROM ZESTD
FOR ALL ENTRIES IN gt_zgcs_foc
WHERE COMPANY = gt_zgcs_foc-COMPANY
AND CUSTOMER = gt_zgcs_foc-CUSTOMER.
ENDIF.
SORT LT_ZESTD BY COMPANY CUSTOMER.
*// part code check
DATA: LT_MARA LIKE MARA OCCURS 0 WITH HEADER LINE.
IF NOT gt_zgcs_foc[] IS INITIAL.
SELECT *
INTO TABLE LT_MARA
FROM MARA
FOR ALL ENTRIES IN gt_zgcs_foc
WHERE MATNR = gt_zgcs_foc-PART_CODE.
ENDIF.
SORT LT_MARA BY MATNR.
LOOP AT gt_zgcs_foc.
*// customer code check
READ TABLE LT_ZESTD WITH KEY
COMPANY = gt_zgcs_foc-COMPANY
CUSTOMER = gt_zgcs_foc-CUSTOMER.
IF SY-SUBRC <> 0.
WRITE:/'Invalid Customer code ',
gt_zgcs_foc-COMPANY, ' ',
gt_zgcs_foc-CUSTOMER.
STOP.
ENDIF.
*// part code check
READ TABLE LT_MARA WITH KEY MATNR = gt_zgcs_foc-PART_CODE
BINARY SEARCH.
IF SY-SUBRC <> 0.
WRITE:/ 'Invalid part code ', gt_zgcs_foc-PART_CODE.
STOP.
ENDIF.
*// REF_NO
TRANSLATE gt_zgcs_foc-REF_NO TO UPPER CASE.
SHIFT gt_zgcs_foc-REF_NO LEFT DELETING LEADING SPACE.
IF gt_zgcs_foc-REF_NO = SPACE.
WRITE:/'Ref No. is blank'.
STOP.
ENDIF.
*// REF_DATE
IF gt_zgcs_foc-REF_DATE = 0.
WRITE:/'Invalid Ref Date'.
STOP.
ENDIF.
*// QTY
* IF gt_zgcs_foc-QTY CO ' 0123456789'.
* ELSE.
* WRITE:/ gt_zgcs_foc-QTY, ' Invalid Qty value'.
* STOP.
* ENDIF.
ENDLOOP.
* Insert/Update table
* MODIFY zgcs_foc FROM TABLE gt_zgcs_foc.
INSERT zgcs_foc FROM TABLE gt_zgcs_foc.
IF sy-subrc EQ 0.
COMMIT WORK.
DESCRIBE TABLE gt_zgcs_foc LINES update_cnt.
error_cnt = read_cnt - update_cnt.
ELSE.
ROLLBACK WORK.
error_cnt = read_cnt - update_cnt.
ENDIF.
ULINE.
FORMAT COLOR 3.
WRITE: / 'Read count :', read_cnt.
WRITE: / 'Insert/Update count :', update_cnt.
WRITE: / 'Error count :', error_cnt.
FORMAT COLOR OFF.
*end-of-selection--------------------------------------------------
END-OF-SELECTION.
*& Form FILE_UPLOAD_FROM_PC
FORM file_upload_from_pc.
IF pcfile IS INITIAL.
WRITE: / 'SELECT UPLOAD FILE !'.
ELSE.
MOVE pcfile TO v_file.
* HQ file upload
IF HQfile EQ 'X'.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = v_file
filetype = 'DAT'
TABLES
data_tab = FOC_inrec
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10.
IF sy-subrc <> 0.
WRITE: / 'FILE UPLOAD :', sy-subrc.
ENDIF.
LOOP AT FOC_inrec.
ADD 1 TO read_cnt.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = FOC_inrec-customer
importing
output = FOC_inrec-customer.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = FOC_inrec-part_code
importing
output = FOC_inrec-part_code.
MOVE-CORRESPONDING FOC_inrec TO gs_zgcs_foc.
MOVE p_comp TO gs_zgcs_foc-company.
MOVE gs_zgcs_foc-qty TO gs_zgcs_foc-balan.
MOVE sy-uname TO gs_zgcs_foc-ERNAM.
MOVE sy-datum TO gs_zgcs_foc-ERDAT.
MOVE sy-UZEIT TO gs_zgcs_foc-ERZET.
* Source(1:HQ,2:SUB,0:Etc)
MOVE '1' TO gs_zgcs_foc-source.
APPEND gs_zgcs_foc TO gt_zgcs_foc.
ENDLOOP.
* SGE file upload
ELSE.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = v_file
filetype = 'DAT'
TABLES
data_tab = inrec
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10.
IF sy-subrc <> 0.
WRITE: / 'FILE UPLOAD :', sy-subrc.
ENDIF.
LOOP AT inrec.
ADD 1 TO read_cnt.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = inrec-customer
importing
output = inrec-customer.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = FOC_inrec-part_code
importing
output = FOC_inrec-part_code.
MOVE-CORRESPONDING inrec TO gs_zgcs_foc.
MOVE p_comp TO gs_zgcs_foc-company.
MOVE gs_zgcs_foc-qty TO gs_zgcs_foc-balan.
MOVE sy-uname TO gs_zgcs_foc-ERNAM.
MOVE sy-datum TO gs_zgcs_foc-ERDAT.
MOVE sy-UZEIT TO gs_zgcs_foc-ERZET.
* Source(1:HQ,2:SUB,0:Etc)
MOVE '2' TO gs_zgcs_foc-source.
APPEND gs_zgcs_foc TO gt_zgcs_foc.
ENDLOOP.
ENDIF.
ENDIF.
ENDFORM.
*MODULE POOL::*
*& Module Name : Warranty Bill
*& Sub-Module : W/B
*& Description : Parts Q'ty Adjust(Sales & Warranty)
*& Program Name : ZRSWBP004
*& History
*& Date Author Reason
*& 2007.05.08 Song, Ji-Hyun Initial Coding Req.by WH.Song
*& Logic Process
* - CONDITIONS
* Company, Customer, Material
* - PROCESS
* Display,Insert,Update data in the T/B ZESP04
REPORT zrswbp004 NO STANDARD PAGE HEADING
MESSAGE-ID 00
LINE-SIZE 250
LINE-COUNT 50.
* G L O B A L V A R I A B L E S *
TABLES : zesp04.
DATA : BEGIN OF itab_list OCCURS 0,
company LIKE zesp04-company,
customer LIKE zesp04-customer,
material LIKE zesp04-material,
adj_date LIKE zesp04-adj_date,
adjust LIKE zesp04-adjust,
reason LIKE zesp04-reason,
reason_code LIKE zesp04-reason_code,
doc_no LIKE zesp04-doc_no,
in_date LIKE zesp04-in_date,
create_id LIKE zesp04-create_id,
END OF itab_list.
DATA : itab_upload LIKE TABLE OF zesp04 WITH HEADER LINE.
DATA : s_mode(10).
DATA : table_name(10) VALUE 'ZESP04'.
DATA : tot_cnt TYPE i.
DATA : ref_flag(1).
* M A C R O D E F I N E *
DEFINE conversion_kunnr.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = &1
importing
output = &1.
END-OF-DEFINITION.
DEFINE conversion_material.
call function 'CONVERSION_EXIT_MATN1_INPUT'
exporting
input = &1
importing
output = &1.
END-OF-DEFINITION.
* S E L E C T I O N S C R E E N *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE title1.
PARAMETERS : company LIKE zesp04-company MEMORY ID buk MODIF ID v1
OBLIGATORY.
SELECT-OPTIONS : customer FOR zesp04-customer MEMORY ID kun
MODIF ID v1.
SELECT-OPTIONS : material FOR zesp04-material MEMORY ID mat
MODIF ID v1.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 3.
SELECTION-SCREEN COMMENT 3(12) text-002 MODIF ID v2.
PARAMETERS : up_flag AS CHECKBOX MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(12) text-001 MODIF ID v2.
PARAMETERS : p_fname(300) LOWER CASE MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE title2.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(53) text-003 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(10) text-004 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(12) text-005 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(12) text-006 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(15) text-007 MODIF ID v2.
PARAMETERS : df1 TYPE c RADIOBUTTON GROUP grp1.
SELECTION-SCREEN COMMENT 24(13) text-012 MODIF ID v2.
PARAMETERS : df2 TYPE c RADIOBUTTON GROUP grp1.
SELECTION-SCREEN COMMENT 41(11) text-013 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(14) text-008 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(11) text-009 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(14) text-010 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(10) text-011 MODIF ID v2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b2.
INCLUDE zrswbp004_pbo.
INCLUDE zrswbp004_pai.
INITIALIZATION.
title1 = ' Parts Quantity Adjustment '.
title2 = ' Text File Layout '.
* S T A R T O F S E L E C T I O N *
TOP-OF-PAGE.
PERFORM write_header.
TOP-OF-PAGE DURING LINE-SELECTION.
PERFORM write_header.
START-OF-SELECTION.
IF up_flag = 'X'.
PERFORM upload_data.
ELSE.
PERFORM select_data.
SET PF-STATUS 'PF01' EXCLUDING 'SAVE'.
PERFORM display_data.
ENDIF.
AT USER-COMMAND.
PERFORM user_command.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname.
PERFORM get_filename.
*& Form SELECT_DATA
* Select Data for Display
FORM select_data.
SELECT * FROM (table_name)
INTO CORRESPONDING FIELDS OF TABLE itab_list
WHERE company = company
AND customer IN customer
AND material IN material.
CHECK sy-subrc <> 0.
WRITE: 'No data found with your option.'.
ENDFORM. " SELECT_DATA
*& Form DISPLAY_DATA
* Display Data following Condition
FORM display_data.
LOOP AT itab_list.
FORMAT COLOR 2 INTENSIFIED.
WRITE : / '|' NO-GAP.
WRITE : (07) itab_list-company CENTERED NO-GAP, '|' NO-GAP,
(10) itab_list-customer CENTERED NO-GAP, '|' NO-GAP,
(20) itab_list-material CENTERED NO-GAP, '|' NO-GAP,
(10) itab_list-adj_date CENTERED NO-GAP, '|' NO-GAP,
(15) itab_list-adjust RIGHT-JUSTIFIED NO-GAP, '|'
NO-GAP,
(55) itab_list-reason LEFT-JUSTIFIED NO-GAP, '|' NO-GAP,
(11) itab_list-reason_code CENTERED NO-GAP, '|' NO-GAP,
(10) itab_list-doc_no CENTERED NO-GAP, '|' NO-GAP,
(10) itab_list-in_date CENTERED NO-GAP, '|' NO-GAP,
(12) itab_list-create_id CENTERED NO-GAP, '|' NO-GAP.
FORMAT INTENSIFIED OFF.
HIDE itab_list.
ENDLOOP.
WRITE : / sy-uline(171).
ENDFORM. " DISPLAY_DATA
*& Form WRITE_HEADER
* Write Report Header
FORM write_header.
DATA : line(1024).
CLEAR line WITH '-'.
DESCRIBE TABLE itab_list LINES tot_cnt.
FORMAT INTENSIFIED ON.
WRITE : 15 'Parts Quantity Adjustment'.
SKIP.
WRITE : / 'Total Count : ', tot_cnt.
WRITE : /.
WRITE : (171) sy-uline.
WRITE : / '|' NO-GAP.
WRITE : (07) 'Company' CENTERED NO-GAP, '|' NO-GAP,
(10) 'Customer' CENTERED NO-GAP, '|' NO-GAP,
(20) 'Material' CENTERED NO-GAP, '|' NO-GAP,
(10) 'Adj. Date' CENTERED NO-GAP, '|' NO-GAP,
(15) 'Adjust' CENTERED NO-GAP, '|' NO-GAP,
(55) 'Reason' CENTERED NO-GAP, '|' NO-GAP,
(11) 'Reason Code' CENTERED NO-GAP, '|' NO-GAP,
(10) 'Doc No' CENTERED NO-GAP, '|' NO-GAP,
(10) 'IN DATE' CENTERED NO-GAP, '|' NO-GAP,
(12) 'CREATE ID' CENTERED NO-GAP, '|' NO-GAP.
WRITE : /(171) sy-uline.
FORMAT INTENSIFIED OFF.
ENDFORM. " WRITE_HEADER
*& Form UPLOAD_DATA
* Data Upload from File
FORM upload_data.
DATA : l_filename LIKE rlgrap-filename,
temp_dateformat TYPE dateformat.
IF df1 = 'X'.
temp_dateformat = 'YYYY.MM.DD'.
ELSE.
temp_dateformat = 'DD.MM.YYYY'.
ENDIF.
MOVE p_fname TO l_filename.
CHECK l_filename NE space.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = l_filename
filetype = 'DAT'
dat_d_format = temp_dateformat
TABLES
data_tab = itab_list
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9.
IF sy-subrc NE 0.
MESSAGE s000 WITH 'File upload is failed!'.
STOP.
ELSE.
CLEAR : itab_upload, itab_upload[].
LOOP AT itab_list.
MOVE-CORRESPONDING itab_list TO itab_upload.
conversion_kunnr itab_upload-customer.
conversion_material itab_upload-material.
itab_upload-mandt = sy-mandt.
itab_upload-in_date = sy-datum.
itab_upload-create_id = sy-uname.
*>>>>Insert by GSCHOI 2007.11.08
IF itab_list-adj_date+0(6) NE sy-datum+0(6).
MESSAGE i368 WITH 'Adjust month must same as current month!'.
ROLLBACK WORK.
STOP.
ENDIF.
*<<<<End
APPEND itab_upload.
INSERT INTO (table_name) VALUES itab_upload.
IF sy-subrc EQ 0.
CONTINUE.
ELSEIF sy-subrc EQ 4.
MESSAGE s368 WITH 'Duplicated Data Error!'.
ROLLBACK WORK.
STOP.
ELSE.
MESSAGE s368 WITH 'File Error!'.
ROLLBACK WORK.
STOP.
ENDIF.
ENDLOOP.
ENDIF.
IF sy-subrc EQ 0.
MESSAGE s368 WITH 'Uploaded Successfully!'.
ENDIF.
ENDFORM. " UPLOAD_DATA
*& Form USER_COMMAND
* User Command Execution in Screen 1000
FORM user_command.
MOVE-CORRESPONDING itab_list TO zesp04.
CASE sy-ucomm.
WHEN 'INSERT'.
PERFORM insert_item.
WHEN 'UPDATE'.
PERFORM update_item.
WHEN 'DISPLAY'.
PERFORM display_item.
WHEN 'REFRESH'.
PERFORM refresh_list.
ENDCASE.
IF ref_flag = 'Y'.
PERFORM refresh_list.
CLEAR ref_flag.
ENDIF.
ENDFORM. " USER_COMMAND
*& Form INSERT_ITEM
* When Clicking Insert Button
FORM insert_item.
CLEAR : s_mode.
CLEAR : zesp04.
s_mode = 'INSERT'.
CALL SCREEN '100'.
ENDFORM. " INSERT_ITEM
*& Form UPDATE_ITEM
* When Clicking Update Button
FORM update_item.
CLEAR : s_mode.
s_mode = 'UPDATE'.
CALL SCREEN '100'.
ENDFORM. " UPDATE_ITEM
*& Form DISPLAY_ITEM
* When Clicking Display Button
FORM display_item.
CLEAR : s_mode.
s_mode = 'DISPLAY'.
CALL SCREEN '100'.
ENDFORM. " DISPLAY_ITEM
*& Form REFRESH_LIST
* When Clicking Refresh Button or Returning Display Screen
FORM refresh_list.
CLEAR : itab_list, itab_list[].
PERFORM select_data.
sy-lsind = sy-lsind - 1.
PERFORM display_data.
ENDFORM. " REFRESH_LIST
*& Form GET_FILENAME
* Get Filename
FORM get_filename.
DATA: l_fname LIKE ibipparms-path .
DATA : p_name LIKE sy-repid.
p_name = sy-repid.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = p_name
dynpro_number = sy-dynnr
field_name = ''
IMPORTING
file_name = l_fname.
p_fname = l_fname.
ENDFORM. " GET_FILENAME
Edited by: Matt on Nov 24, 2008 11:24 AM - surrounded the ABAP with tagsHi,
Use SUBMIT statement in your first Report zrswbgcs009 at the end, to call the Modulepool program zrswbp004.
do a search in SDN you will get lot of threads on SUBMIT statement with selection screen.
SUBMIT... [VIA SELECTION-SCREEN]
[USING SELECTION-SET <var>]
[WITH <sel> <criterion>]
[WITH FREE SELECTIONS <freesel>]
[WITH SELECTION-TABLE <rspar>].
http://help.sap.com/saphelp_nw04/Helpdata/EN/9f/dba51a35c111d1829f0000e829fbfe/content.htm
Regards
Bala Krishna -
Calling a report from module pool program
Hi all,
I had a requirement where I need to call a report from the module pool program where in when we click REPORT button, it should display the report output in the another screen.
Can we do by calling screen after pushing REPORT button. If so, where we should write that code ( In pbo or pai). Please give me an idea.
Thanking you,
Regards,
Murali Krishna TUse submit syntax.
Press F1 on submit, Donot use return statement with it.
If so, where we should write that code ( In pbo or pai).
Please understand about these two events before doing the requirement. -
How to make a fld mandatory in module pool program?
I need help on following 2 things
I have module pool program created, in that many screen subscreens created.
1.I want to make a field mandatory
second one is, I have a general tab and data tab.
General tab screen - 2101
Data tab = 2102
In general tab, I have edited the values (change mode), when change the values and try to save it,
It is holding old value.but If i exucute the transaction once again, it is showing the changed value(new value)
For ex: there is a date field value is 03/08/2009
If I change this to 03/09/2009 and press on Save button from the standard menu, still it is showing the value 03/08/2009. but I execute this transaction once again it is showing the value as 03/09/2009
I will be thankful if someone helps me hereHi Chitra,
Go to the properties of the filed select program tab and say input required.
then you will get the problem solved.
For second one actually its saving but not displaying the saved value at the same time ,
for this you write the select statement after saving , so that once save is execute m, select statement also will execute and it will display the newly saved value.
so after saving imdeatly u write the select statement.
like case sy-ucomm.
when 'SAVE'.
insert ztable.
select filed from z table.
endcase.
let me know if ur problem solved.
Regards
Rajendra -
How to use one module pool program in another module pool programming?
Hi
I have one moodule pool program.
In one of my screen i want to use some code which already developed in another module pool program.
Is there any direct way for using one module pool programcode in another module pool program.
If there any approaches for this plz help me in this issue.Dear,
If you want to use the code.
first you can write your code in a subroutine in module pool program 1
and then you can use it from module pool program 2 by
perform subroutine_name(program_name)
using P_1
changing C_1
if you wan to use one module pool data into other module pool.
so that is another requirement. -
How to create Long Text in Module Pool Program
Hi all,
I want to develop a new module pool program and I want to use Long text screen in this program and also want this text will store in table.I never develop such type of module pool before.This long text will like sales order long text.Please let me know the steps how I can develop such type of program and how I save long text huge data in table.
Thanks & Regards
NirmalHai ,
here you have to use custom control, for this
DATA: line(256) TYPE c,
text_tab LIKE STANDARD TABLE OF line,
field LIKE line.
1) Create custom control in your screen
2) CREATE OBJECT: container EXPORTING container_name = 'TEXTEDIT', "--> (this is custom control name in screen)
editor EXPORTING parent = container.
3) CALL METHOD editor->get_text_as_stream "This method reads data from custom control , inserts into itab 'text_tab'
IMPORTING
text = text_tab. "
READ TABLE text_tab INTO line INDEX 1. read the text into wa 'line'
if you want more clarity , see 'ABAPDOCU' >ABAP USER DIALOGS> COMPLEXSCREEN ELEMENTS--> DEMO CUSTOM_CONTROL -
How to take backup of an entire module pool program with code,screen,etc.
Hi experts,
I have some important data in the ides server for which i want to take backup of them.
I have some question regarding the same.
1.How to take backup/download of an entire module pool program with code,screen,etc.
2.How can we take backup/download for a DB table with its structure?
3.How can we take backup of a search help?
Please give some suggestions abt the same.
Regards,
Ashesh.Hi,
May be just for viewing, try downloading from SE80 transaction from the others option.
Here just try issuing the print, it will generate the spool.
Now using the spool, download to your desktop as required. It will have all the information regarding the attributes, fields, elements everything.
The only issue is, may be you need to take all the screens separately.
Regards,
Santhosh. -
How to validate the field values in module pool program?
Hi Guys
I am working with module pool programming.
Here I want to validate the fields like below.
with out filling all the fields if I click SAVE option it has to show a message that all fields has to be filled. This can be done by checking all the fields individually.
I think it can be done through <b>LOOP AT SCREEN ......ENDLOOP</b>. sequence.
If it is possible, can anyone help me?You need to write the Module in between the CHAIN and ENDCHAIN statment in SE51
If you send a warning or error message from a module <mod> that you called using a FIELD statement as follows:
CHAIN.
FIELD: <f1>, <f 2>,...
MODULE <mod1>.
FIELD: <g1>, <g 2>,...
MODULE <mod2>.
ENDCHAIN.
all of the fields on the screen that belong to the processing chain (all of the fields listed in the field statements) are made ready for input again. Other fields are not ready for input. Whenever the MODULE statement appears within a processing chain, even if there is only one FIELD attached to it, all of the fields in the chain (not only the affected field) are made ready for input again, allowing the user to enter new values. If the fields in the processing chain are only checked once, the PAI processing continues directly after the FIELD statement, and the preceding modules are not called again.
Look at the DEMO program DEMO_DYNPRO_FIELD_CHAIN.
ashish -
How to change the logon language in module pool program?
Hello All,
I had created a module pool program and had desiged a screen.
When i am logged in English language i am able to see them in english as per the requirement it is working fine.
But the requirement is wen i am logged in DE then the selection-screen texts should show in English and not in German.
Kindly give me a solution for this.
Thanks & Regards,
Rajesh KumarHi Rajesh,
This problem is because you have maintained a standard dictionary fields on selection screen and all the standard dictionary fields are maintained in DE language, on the screen layout, go to the attributes of that particular text field, there is a option MODIFIZ for dictionary fields (it is a drop down), selection F TEXT, now whatever the text u will define, it will remain same for all the languages, once u do this then u again login in DE,l u will see the text maintained by u and not the DE text.
Do reply if problem still persist.
point if useful.
Rohit G
Edited by: Rohit Gaharwar on Aug 11, 2009 1:24 PM
Edited by: Rohit Gaharwar on Aug 11, 2009 1:30 PM
Edited by: Rohit Gaharwar on Aug 11, 2009 1:36 PM
Edited by: Rohit Gaharwar on Aug 11, 2009 1:36 PM
Edited by: Rohit Gaharwar on Aug 11, 2009 1:37 PM
Edited by: Rohit Gaharwar on Aug 11, 2009 1:38 PM -
How to get tree structure navigation in module pool program
please send me a sample code for getting tree structure navigation in a screen in module pool program.
ex.
masters
itemsdo a chain and endchain on the fields.Then insert the fields in to the required database.
Maybe you are looking for
-
User wants to display the % symbol beside the value
Hi all, I have a key figure ..which is added to formula(aggregation tab set as average of a characteristic). its displaying average correctly in the report output ,but user want it to be displayed % symbol beside that . how can i do that .. For other
-
Why do actor/director tags not appear on iPad via home sharing?
I have imported some movies (not purchased from iTunes) into iTunes, and added tags. The movies play perfectly in iTunes, and via home sharing on my iPad, iPhone, and Apple TV 2. The strange thing is that some of the tags (actors, director) don't dis
-
Reconciling composite primary key tables in 9.0.1.4 DB app connector
Hi I am trying to get the reconciliation in the 9.0.1.4 db app connector to work on a view that has a composite primary key (one user_id field and one group_id field) There are no examples on how to do this and my "trial-and-error" efforts have not b
-
Help need on inserting system date on database
hello every body, I need to insert system date into database through prepared statement. i wrote code : java.util.Date d=new java.util.Date(); Preparestatement psmt; psmt.setDate(8, java.sql.Date(d)); am getting class cast exception : could u please
-
Master data among multi company
Experts, how does SAP handle of master data in case different system setup in different location? For Example: Multi Company case where ABC company operates in USA with own SAP system, XYZ company operates in UK with own SAP system. But where is the