REG: Monitoring of Receiver Proxy

Hi All,
How do we monitor or track Receiver proxy interfaces. Please provide links on the same.
Thanks,
Siva

Hi,
I have a secnario where proxy is at the receiver side. The interface is sucessfull from the Xi side and I can see checked flag in moni. But at the SAP end the table is not updated.
So wanted to know where exactly the error could have occuered and hoe to debugg it.
Thanks,
Siva

Similar Messages

Monitoring HTTP receiver adapter ?

Hi Guys,
How to monitor the HTTP adapter ? How can we know when any errors in the HTTP adapter ? Do i need to look in the integration engine ?
Thanks,
srini

If there is an error in your reciever HTTP adapter you will find the red flag in XI itself in SXMB_MONI.
To monitor your Receiver HTTP adapter, you need to use the SXMb_MONI itself.
Regards
Bhavesh

Java Receiver Proxy Base Info

Hi
i have a File-to-RFC Scenario replaced with a File-to-ABAPProxy Scenario. This works. It's possible to replace the ABAP Proxy on my SAP Target System by a Java Receiver Proxy?
Reason for this question: I understand, that in my ABAP proxy i do the mapping from my PI Dataformat to the RFC destination Format (ABAP Function) manually in the Proxy class in ABAP. I'm actually a Java Programmer and would prefer to do the mapping in Java.
I searched on this subject and understood that i have to install the Java Proxy Runtime, but I'm don't know if this only works for a non-central AE and non-SAP interfaces or if I also can encapsulate a remote ABAP function on my target system.
Thanks in advance
Michael

Michael,
>>I understand, that in my ABAP proxy i do the mapping from my PI Dataformat to the RFC destination Format (ABAP Function) manually in the Proxy class in ABAP.
Yes, You are right
>>I'm actually a Java Programmer and would prefer to do the mapping in Java.
You can do with the help of Java too
>>i have to install the Java Proxy Runtime
You are right
>>but I'm don't know if this only works for a non-central AE and non-SAP interfaces
We can do it for SAP system too, for example thru portal service we can trigger the BAPI
Thanks
Agasthuri

Receiver Proxy Generation error

Hi Experts,
As per scenario. (file to Proxy and Proxy to file)
I am created two namspaces like this
http://SAP/XI (for SAP)
http://SAPto/MQ (for 3rd party)
for all interfaces i have to do proxy to file and file to proxy ASY. so i created
message interfaces like this.
under http://SAP/XI   (for SAP)
         MI_OA_ABC
        MI_IA_123
   http://SAPto/MQ   (for 3rd party)
MI_IA_ABC
MI_OA_123
here i am given same name for inbond/outound interfaces
then i am trying to generate proxy (client) under SAP for proxy to file
I am getting bleo error
same as receiver proxy also
error:
Objects from other namesapces are missing unble to save"

Hi Srinivasreddy,
          U need to save & ACTIVATE the two namespaces.first check it that one.
         You are working with FILE to PROXY & PROXY to FILE scenarios.
FILE to PROXY: U can create one namespace for both file & PROXY that enough.
                        like PROXY to file also.
Regards,
sateesh

Citrix Receiver Proxy

Hi
Im trying to configure the Citrix Mobile Receiver Proxy on a ASA but cant get it to work.
The ASA got several VPN configured, both client, clientless vpn and L2L.
It looks like ASA are terminating SSL every time the iPad connects.
What could be missing here? And any good advice on how to troubleshoot appreciated.
ASA 5585 - OS 9.1(8)
Citrix Receiver - 5.8.3
Citrix config:
group-policy DfltGrpPolicy attributes
dns-server value x.x.x.30 x.x.x.31
vpn-simultaneous-logins 10
vpn-tunnel-protocol ikev1 l2tp-ipsec
default-domain value xxx .org
webvpn
customization value DfltCustomization
vdi type citrix url http://citrix.xxx.org domain xxx.org username CSCO_WEBVPN_USERNAME password CSCO_WEBVPN_PASSWORD
From Log Viewer:

I did some captures today and all I got is the outside capture with a RST,ACK back to my test client.
On the inside interface, going to the Citrix server nothing. Did check for both ASA inside IP and the Citrix server IP in diffrent ways (any->ASA, Citrix->any, etc)
Looks like ASA is not listening for, or understands, incomming Citrix traffic?
Edit:
Just saw this: Key size >1024 is not supported as of now.
All certificates on the ASA are 2048, probably the problem?
Cheers

Cannot see PI receiver(Proxy) adapter - advanced adapter specific message

Hello Friends,
I cannot see adapter specific message attributes in receiver adapter XI (abap proxy) for enabling. I want to use these properties for getting a file name dynamically in a receiver structure.
I had seen a blog by Mr.Michal but that gives details for file to file. Here my target is abap proxy so I cannot see advance tab properties in XI adapter used communication channel.
Clearly my interface is file to ecc (using proxy), where i will have to read a file name which my interface picks and has to update in ecc.
I have enabled the sender side File adapter - ASMessage attributes but am not able to find the attributes in receiver side. Does it make any diffrence if am not enable the attributes at receiver adapter.
Thanks very much.

Swarna,
in your scenario in order to have the file name updated on ecc, you must:
1. Set the ASMA properties on sender channel
2. Read the property in mapping and put the value in a custom field on the proxy structure. Create an UD like this:
UD
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String onixdataset = conf.get(key);
--- END UD
3. Manage the filename in the proxy class with your requirements
Regards,
Andrea

External monitor not receiving signal

In a MacBook Pro with Mountain Lion 10.8.3 when connecting to an external monitor does not appeare to be receiving signal.

Apple support article:
Video Troubleshooting Internal and External Monitors

Samsung Monitor not receiving signal through HDMI Mini DisplayPort

I have been having issues using my Macbook Pro on an external monitor lately.
Up until a couple of days ago I was using my monitor as the primary display for my laptop and using the Bluetooth keyboard and trackpad, so my laptop has been closed. I tried to 'wake up' my mac as I usually would do but nothing happened, the monitors power light kept flashing, which is what is does when it isn't receiving a signal, so as anyone else would I investigated and found that my macbook was working the way that it normally would except it doesn't detect the external monitor at all.
I have tried changing the cable, changing the monitor from my 23" samsung display to my 42" sony tv, Restarted my mac more times that I could count and have also updated to the latest software that I possibly could.
I am going to buy a new Mini DisplayPort adapter tomorrow but I would rather just fix it with what I have if I can.
Thank you for any help that can be provided.

Check the cable does not have an air gap at either end.
Sorry ... no other ideas.

WS Adapter for Receiver Proxy

Hi all,
I am working on an ECC to SRM scenarion on XI 7.1. I am using WS Adapter at the receiver side and there is no ABAP Proxy code in the SRM side. There is however, proxy for the sender side, ECC. I am getting an error about logical port, I raised a question few days ago but I am not able to solve it. I have few doubts.
1) Is it possible to use WS Adapter for receiver system like SRM which is an SAP System and also without using a proxy code ?
2) Do I have to configure a logical port for this scenario using SOAMANAGER as I have only one XI server in the landscape. I saw a blog but that blog talks about multiple XI servers. I have only one XI server but I am getting an error at the call adapter step something like " "Error while determining logical port Cannot find logical port for agreement abc and interface xyz"
I don't want to do the entire thing using Proxy
Regards

>1) Is it possible to use WS Adapter for receiver system like SRM which is an SAP System and also without using a proxy code ?
Yes it is possible if you use direct connection using WS adapter. you dont need proxy code
>Do I have to configure a logical port for this scenario using SOAMANAGER as I have only one XI server in the landscape. I saw a blog but that blog talks about multiple XI servers. I have only one XI server but I am getting an error at the call adapter step something like " "Error while determining logical port Cannot find logical port for agreement abc and interface xyz"
Refer this link for your need
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b043ef4e-e8d1-2c10-7d88-8077b209ce55?quicklink=index&overridelayout=true

Receiver proxy error - CLIENT_RECEIVE_FAILED error code 200

Hi,
Scenario: JDBC to Proxy.
I am getting an error on the receiver side - below is the error.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>200</SAP:P1>
<SAP:P2>Error Parsing Response. No XI Response Received.</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>--SAP_4732F0E6BA080C67E1000000A859B621_END content-type:text/xml content-length:4118 content-id:<[email protected]> <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"> <SOAP:Header xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"> <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7"><SAP:MessageClass>ApplicationMessage</SAP:MessageClass><SAP:ProcessingMode>asynchronous</SAP:ProcessingMode><SAP:MessageId>FA074580-8DE5-11DC-9B3E-00144F2B5900</SAP:MessageId><SAP:TimeSent>2007-11-08T10:33:00Z</SAP:TimeSent><SAP:Sender><SAP:Service>BS_ESS</SAP:Service></SAP:Sender><SAP:Receiver><SAP:Party agency="" scheme=""/><SAP:Service>CD103</SAP:Service></SAP:Receiver><SAP:Interface namespace="http://www.Coj.co.za/EssToSapIsu/Ess">MI_EssToSapIsu_EssMiForSapIsu</SAP:Interface></SAP:Main> <SAP:ReliableMessaging xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:QualityOfService>ExactlyOnce</SAP:QualityOfService></SAP:ReliableMessaging> <SAP:HopList xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:Hop timeStamp="2007-11-08T10:33:00Z" wasRead="false"><SAP:Engine type="AE">af.cxd.jssxid0</SAP:Engine><SAP:Adapter namespace="http://sap.com/xi/XI/System">XIRA</SAP:Adapter><SAP:MessageId>FA074580-8DE5-11DC-9B3E-00144F2B5900</SAP:MessageId><SAP:Info/></SAP:Hop><SAP:Hop timeStamp="2007-11-08T10:33:00Z" wasRead="false"><SAP:Engine type="IS">is.00.jssxid0</SAP:Engine><SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter><SAP:MessageId>FA074580-8DE5-11DC-9B3E-00144F2B5900</SAP:MessageId><SAP:Info>3.0</SAP:Info></SAP:Hop></SAP:HopList> <SAP:Diagnostic xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:TraceLevel>Information</SAP:TraceLevel><SAP:Logging>Off</SAP:Logging></SAP:Diagnostic> <SAP:MessageHeader xmlns:SAP="http://sap.com/exchange/MessageFormat" version="1.0" SOAP:mustUnderstand="1"><SAP:From><SAP:Name></SAP:Name><SAP:Interface namespace=""></SAP:Interface></SAP:From><SAP:MessageId>00000000-0000-0000-0000-000000000000</SAP:MessageId><SAP:QualityOfService></SAP:QualityOfService><SAP:TimeSent></SAP:TimeSent><SAP:Direction>Request</SAP:Direction><SAP:Document></SAP:Document></SAP:MessageHeader> <SAP:ErrorHeader xmlns:SAP="http://sap.com/exchange/MessageFormat"><SAP:Context></SAP:Context><SAP:Code p1="" p2="" p3="" p4="">CALLER.MSG_GUID_NOT_QUALIFIED</SAP:Code><SAP:Text language="EN">Attribute message GUID not specified</SAP:Text></SAP:ErrorHeader> <SAP:HopList xmlns:SAP="http://sap.com/exchange/MessageFormat" Version="1.0"><SAP:Hop SystemName="CD103" Type="SENDER" TimeStamp="2007-11-08T11:00:57Z" WasRead="0"><SAP:MessageInbound><SAP:Type>AENGINE</SAP:Type></SAP:MessageInbound><SAP:MessageOutbound><SAP:Type></SAP:Type></SAP:MessageOutbound></SAP:Hop></SAP:HopList> <SAP:InternalAttributesHeader xmlns:SAP="http://sap.com/exchange/MessageFormat"><SAP:AdapterInbound>AENGINE</SAP:AdapterInbound></SAP:InternalAttributesHeader> </SOAP:Header> <SOAP:Body xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"> <SAP:Manifest xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7"><SAP:Payload xlink:href="cid:[email protected]"><SAP:Name>MainDocument</SAP:Name><SAP:Description/><SAP:Type>Application</SAP:Type></SAP:Payload></SAP:Manifest> <SAP:Manifest xmlns:SAP="http://sap.com/exchange/MessageFormat" xmlns:xlink="http://www.w3.org/1999/xlink" version="1.0"> <SAP:Payload xlink:href="cid:[email protected]"> <SAP:Document>TraceDocument</SAP:Document> </SAP:Payload> </SAP:Manifest> </SOAP:Body> </SOAP:Envelope> --SAP_4732F0E6BA080C67E1000000A859B621_END content-type:application/xml content-length:417 content-id:[email protected] <?xml version="1.0" encoding="UTF-8"?> <ns0:MT_EssToSapIsu_EssMtForSapIsu xmlns:ns0="http://www.Coj.co.za/EssToSapIsu/Ess"><TABLE1><BSTKD>A0707120330</BSTKD><BSTDK>12-07-2007 </BSTDK><ZE01>15:33</ZE01><ZE04>JANICE</ZE04><ZE05>DS3</ZE05><ZE06>RIVERLEA</ZE06><ZE02>,957 A KOMANI,RIVERLEA</ZE02><MATNR>A</MATNR><ZE03></ZE03><AUGRU>Medical - General</AUGRU></TABLE1></ns0:MT_EssToSapIsu_EssMtForSapIsu> --SAP_4732F0E6BA080C67E1000000A859B621_END content-type:text/plain content-length:1717 content-id:[email protected] <?xml version="1.0" encoding="UTF-8" standalone="yes" ?><SAP:TraceHeader xmlns:SAP="http://sap.com/exchange/MessageFormat"><Trace level="1" type="B">CL_XMS_TROUBLESHOOT-ENTER_PLSRV</Trace> <Trace level="1" type="E">CL_XMS_TROUBLESHOOT-ENTER_PLSRV</Trace> <Trace level="1" type="T">**************************************************** </Trace> <Trace level="1" type="T">* * </Trace> <Trace level="1" type="T">* * </Trace> <Trace level="1" type="T">XMB entry processing </Trace> <Trace level="1" type="T">system-ID = CD1</Trace> <Trace level="1" type="T">client = 103</Trace> <Trace level="1" type="T">language = E</Trace> <Trace level="1" type="T">user = MOLAIM</Trace> <Trace level="1" type="Timestamp">2007-11-08T11:00:57Z </Trace> <Trace level="1" type="T">* * </Trace> <Trace level="1" type="T">* * </Trace> <Trace level="1" type="T">**************************************************** </Trace> <Trace level="1" type="B">CL_XMS_MAIN-CALL_UC_EXECUTE</Trace> <Trace level="1" type="T">Message-GUID = 00000000000000000000000000000000</Trace> <Trace level="1" type="E">CL_XMS_MAIN-CALL_UC_EXECUTE</Trace> <Trace level="1" type="System_Error">Exit XMB because of system error!</Trace> <Trace level="1" type="System_Error">System-Error: CALLER.MSG_GUID_NOT_QUALIFIED</Trace> <Trace level="1" type="System_Error">Attribute message GUID not specified </Trace> <Trace level="1" type="E">CL_XMS_MAIN-ENTER_XMS</Trace> <Trace level="1" type="E">CL_XMS_HTTP_HANDLER-HANDLE_REQUEST</Trace> </SAP:TraceHeader> SAP_4732F0E6BA080C67E1000000A859B621_END</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while receiving by HTTP (error code: 200, error text: Error Parsing Response. No XI Response Received.)</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
Thanks,
Leanne

Are u trying a synch scenario? Ur server proxy must be receiving the data properly. If it is a sync scenario then u should check the response mapping again in sxmb_moni.
Regards,
Prateek

Monitor not receiving signal from computer

I have an Envy 700-074 and I bought a EVGA Geforce GTX 660 (Superclocked) video card to use with it this past July. It worked very well for the past few months until mid-September when I started having problems while play WOW (I had no problems playing other games that required more video than WOW or in doing my 3d rendering). So two days ago I contacted Blizzard support for advice and they told me to run this display driver uninstaller from guru 3d to totally remove the nvidia drivers from my computer and then reinstall them fresh. Well when I ran the driver remover program, my screen went black and now I can't get any display response at all from my computer. The monitor says it is receiving no signal from my computer. I tried with both a DVI hookup and a VGA hookup and got same response. Please tell me what I can do to fix this. I need my computer.

Hello @Eanori,
Yes re-formatting should get you your drivers back and at the very least give you a clean build to work from. I am going to provide you with all the steps to backup and recover your computer back to factory settings. To backup your personal information and ensure that it is not lost I would like you to review and follow the steps set out in the HP Support document: Backing Up Your Files (Windows 8), which will ensure your personal files are up to date.
***WARNING!! If you want to keep any emails or bookmarks/favorites you will want to back those up as well as I do not believe they are backed up in the HP Backup process.
Next, I would like you to review and follow the steps set out in the HP Support document: Performing an HP System Recovery (Windows 8), which will you through recovering your computer back to factory settings.
*** IMPORTANT - Your personal files such as libraries, personalization settings, user accounts, and desktop themes are permanently removed. As well the computer settings are returned to the defaults (the way it was when it came from the factory). All apps and software that were installed on the computer when it came from the factory are reinstalled, and their settings are reset to the defaults. Additionally, software, apps, programs, and everything that you have installed or saved on the computer are permanently removed.
If the above steps did not resolve your issue please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Target Filename generation - receiver proxy.

Hi,
I need to create target filename same as source filename. When receiver communication channel is proxy. Communication channel.
Thanks,
Venu.

Venu,
So the flow will be like,
Step1: file->proxy(with some validation)
Step2: based on the validation from the step1 trigger an outbound proxy and create the file.
For this you need to use the module in your sender file adapter and then pass it as an extra field in the payload...this field you'll be maintaining in your source and target structure of your step1.
Now this file name will be available in your inbound proxy, do the validation and send it in the outbound proxy structure(which again will have the node to hold the file name).
In the step2 as the last part in the receiver file adapter use variable substitution.
This will hold good if you are using XI throughout. If you are not using step 2 still you can use module to get the file name and pass it to the proxy data and in ABAP code, you can use OPEN DATASET command(check for its syntax) and create the file in the R/3 server application layer.
cheers
JK

Receiver Proxy

Do we need to create receiver communication channel and receiver agreement if target is SAP ECC(proxy)?

Hi Naresh,
We have to create receiver comm channel & recv agreement in case of inbound proxys.
Refer to the foolowing links :
ABAP Server proxies
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
Debugging of Inbound ABAP proxies
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
File to R/3 via ABAP Proxy
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
Regards,
Vinod.

Monitoring 'Messages Received' & 'Sent' on WL console

I'm running a stress test on a WL server 6.1 SP1 deployment.
Monitoring the client to server connections at peak usage, in the WL server console,
I find that the EJB server's default queue shows lopsided numbers:
Messages Received = 4644
Messages Sent = 1219
Messages Sent remains constant after maximum load and increases only towards the
end of the test when load is reduced.
Can someone throw more light on this?? What tuning may be required to improve
this ratio?
The application is doing mostly JDBC calls to the database. Most of the threads
in the execute queue are idle. The average CPU usage on the WL server machine
as well as the DB server is less than 10%.
Thanks in advance.
- Gagan

We'd need some more info before we can suggest how to tune or improve
the performance of your application.
I'd start by running a single client thread. If the performance of that
is not fast enough then start determining where it is spending its time
(eg in WL or in the database etc).
If a single client is fine, start ramping up to more clients until your
performance becomes unacceptable. At that point, I'd start with the
same gaim of recording info (eg cpu usage etc) and measuring times.
-- Rob
Gagan Bhatnagar wrote:
I'm running a stress test on a WL server 6.1 SP1 deployment.
Monitoring the client to server connections at peak usage, in the WL server console,
I find that the EJB server's default queue shows lopsided numbers:
Messages Received = 4644
Messages Sent = 1219
Messages Sent remains constant after maximum load and increases only towards the
end of the test when load is reduced.
Can someone throw more light on this?? What tuning may be required to improve
this ratio?
The application is doing mostly JDBC calls to the database. Most of the threads
in the execute queue are idle. The average CPU usage on the WL server machine
as well as the DB server is less than 10%.
Thanks in advance.
- Gagan

How Do We Monitor HTTP Receiver Communication Channel

Hi Exports,
How do we monitor the HTTP Receiver communication channel. Could you please share your ideas.
I am able to send the message to http to third party system. i want to monitor all messages which it's goes to third party system. Same like if you go to component monitoring we have communication channel monitoring over there we can do monitoring by adapter but when we choose http communication channel there is 0 messages.
Please provide monitoring thing those messages which is goes to third party system.
Advance thanks
Regards
Ramidi S

There isnt any transaction to directly monitor the HTTP adapter. However u may do the following:
1. To test the HTTP adapter you can just test the adapter_plain service in TCODE SICF.
2. TCODE : SMICM and then Shift + F1 and you can see the status of the HTTP server
3. You can go to SM59 to see whether the HTTP connections between XI and R/3 are up and running
Regards,
Prateek

REG: Monitoring of Receiver Proxy

Similar Messages

Maybe you are looking for