Reg : Multiple Select Option with validation.

Hi Abap Guru's,
In my report iam giving the Input using the select option : Movement type in which i need to take only few mov.types like 101,105,321,344 in my report .Pls help me how to do ASAP..?

Hi ,
refer the below code.
First it defaults the required values to selection screen ( at initialization event ).
and then if user enters any other value then this value will be ignored.
*& Report ZRTESTTEST
REPORT ZRTESTTEST.
data: mtype(3) type c.
select-options: s_mtype for mtype.
Types: begin of ty_range,
             sign type bapisign,
            Option type bapioption,
            low(3) type c,
            high(3) type c,
     End of ty_range.
Data: i_range type standard table of ty_range,
           wa_range type ty_range.
initialization. " initialization.
s_mtype-sign ='I'.
s_mtype-option = 'EQ'.
s_mtype-low    = '101'.
append s_mtype.
clear s_mtype.
s_mtype-sign ='I'.
s_mtype-option = 'EQ'.
s_mtype-low    = '105'.
append s_mtype.
clear s_mtype.
s_mtype-sign ='I'.
s_mtype-option = 'EQ'.
s_mtype-low    = '321'.
append s_mtype.
clear s_mtype.
s_mtype-sign ='I'.
s_mtype-option = 'EQ'.
s_mtype-low    = '344'.
append s_mtype.
Clear wa_range.
Wa_range-sign = 'I'.
wa_range-option = 'EQ'.
wa_range-low = '101'.
Append wa_range to i_range.
start-of-selection.
Clear wa_range.
Wa_range-sign = 'I'.
Wa_range-option = 'EQ'.
Wa_range-low = '105'.
Append wa_range to i_range.
Clear wa_range.
Wa_range-sign = 'I'.
Wa_range-option = 'EQ'.
Wa_range-low = '321'.
Append wa_range to i_range.
Clear wa_range.
Wa_range-sign = 'I'.
Wa_range-option = 'EQ'.
Wa_range-low = '344'.
Append wa_range to i_range.
delete s_mtype[] where low not in i_range[].
If s_mtype[] is initial.
break-point.
* raise the error here.
Endif.
Hope this helps you.
Kind Regards,
Ravi Sankar.Z

Similar Messages

Problem with Multiple selection option

Hi all,
I am working on a report, when I execute the report and the selection screen comes up, there I need to enter 5 different employee name so I am trying to use "multiple selection" option but as soon as I hit that "Yellow arrow" in front of employee name field .. I saw the output first and when I go one screen back I get that screen where I can enter the names. So can you please help me with this.
Thanks,
Rajeev

Hi,
I have written the following code, I guess the problem is in
GD_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      I_CALLBACK_PROGRAM     = GD_REPID
DATA: FIELDCATALOG TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
      GD_TAB_GROUP TYPE SLIS_T_SP_GROUP_ALV,
      GD_LAYOUT    TYPE SLIS_LAYOUT_ALV,
      GD_REPID     LIKE SY-REPID.
FORM DISPLAY_ALV_REPORT .
GD_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      I_CALLBACK_PROGRAM     = GD_REPID
      I_CALLBACK_TOP_OF_PAGE = 'TOP-OF-PAGE'
      IS_LAYOUT              = GD_LAYOUT
      IT_FIELDCAT            = FIELDCATALOG[]
      I_SAVE                 = 'A'
    TABLES
      T_OUTTAB               = IT_tab
    EXCEPTIONS
      PROGRAM_ERROR          = 1
      OTHERS                 = 2.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " DISPLAY_ALV_REPORTcode}
Thanks,
Rajeev

Multiple Selections Disabled after validation

Hi experts ,
Couldsomebody please correct me on this :-
I have a validation check for a select-option with NO Intervals.
Any incorrect value in the Select option then an error message pops up . Now if there are multiple values in the Selct-option multiple selection then also the error popos up showing the wrong entires . But when i try to change again i.e click on multiple selection then it doesnot allow the user to enter and correct those entries.
Could you please let me know the best posible way to check teh above scenario ?
Thanks
Kylietisha

Easy fix would be to remove the EL from the property. This makes the button accessible at all times.
I guess the problem is that after the validation error you have to resubmit the data to make the commit button enable again. Try adding a button which doesn'T have an action or actionListener define on the page. After a validation error and the error is corrected click the new button and see if this enables the commit button again.
Timo

Multiple Select option in Module pool

Hi,
I wanna add a field for 'Delivery number' in the screen of a mod pool prgm.I created a subscreen area in the main screen and did the coding needed.now the problem i am having is if i giv a single value in the from field or values in the 'From' and 'To' field its not taken to the program,i saw it while debugging. but if i enter the values in the multiple selection option its taken to the program.That means from screen its not going to the program where as from the multiple select option its taken to the program,What may be the propblem.
Regards in Advance,
Nitin

Hi,
Have you used the select-options in the subscreen or you have placed the multiple option manually?
Either way, please check the two methods, it may solve your problem.
Create a SELECT-OPTIONS in module pool screen using two methods as shown.
Method 1
a) Create a subscreen area in your screen layout where you want to create the select options.
b) In the top include of your module pool program declare a selection screen as a subscreen e.g.
SELECTION-SCREEN BEGIN OF SCREEN 100 AS SUBSCREEN.
    select-options s_matnr for mara-matnr.
SELECTION-SCREEN END OF SCREEN.
c) In the PBO and PAI of the main screen where the select options needs to be created do a call subscreen of the above screen (100).
CALL SUBCREEN sub_area INCLUDING <program>   <screen>
This CALL SUBSCREEN statement is necessary for transport of values between screen and program.
Note: All validations of the selection screen fields e.g. the s_matnr field created above should be done in selection screen events like AT SELECTION-SCREEN etc and not in PAI. These selection screen validations etc should be done in the top include only.
Method 2
a) Create 2 separate fields in your screen layout - one for the low value and one for the high value. Insert an icon beside the high value which will call the multiple selections popup screen on user command. Use function module COMPLEX_SELECTIONS_DIALOG to achieve this.
struc_tab_and_field-fieldname = con_cust. " 'KUNNR'
struc_tab_and_field-tablename = con_kna1. " 'KNA1'.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
EXPORTING*
TITLE                        = ' '
text                          = g_titl1   " 'Customers'
tab_and_field             = struc_tab_and_field
TABLES
RANGE                     = rng_kunnr
EXCEPTIONS
NO_RANGE_TAB       = 1
CANCELLED              = 2
INTERNAL_ERROR     = 3
INVALID_FIELDNAME = 4
OTHERS                       = 5.
IF NOT rng_kunnr[] IS INITIAL.
Read the very first entry of the range table and pass it to dynpro screen field
READ TABLE rng_kunnr INDEX 1.
IF sy-subrc = 0.
g_cust = rng_kunnr-low.
ENDIF.
ENDIF.
You can use the return table rng_kunnr to populate your own internal range table with the values entered by the user. Basically here you are just simulating the work of a select-options parameter by module pool screen elements.
Regards

One search help for multiple select-options in webdynpro abap

Hi,
I need a way to use one search help for multiple select-options fields. My scenario is :
I have a table for keeping different organizational units' values of different systems. I have pasted some sample data from this table at the end of this mail. On the screen I want to have 1 select-options filed for werks, and 1 select-options filed for vkorg. (In fact I will have more org. unit fields...) In the beginning of my application the user will select sid.
If the user selects ADS as SID, when he opens search-help for the first org. unit (werks), he will see the records with SID: ADS, VARBL = $WERKS, LANGU = SY-LANGU.
If the user selects AGT as SID, when he opens search-help for the second org. unit (vkorg), he will see the records with SID: AGT, VARBL = $VKORG, LANGU = SY-LANGU.
I have created a search-help taking SIDD, VARBL and LANGU as import parameters; used field mapping and bound this search help to my table. I have created 2 context nodes : org1 and org2 having attributes SID, VARBL, VALUE, LANGU .
I have assigned related SID, VARBL and Langu values to these attributes at runtime as I needed. That way, if I use input field and reference to the related context attributes org1-value and org2-value2 accordingly, search help works well as I want.
However, when I use select-options field , I can not bind the field to the context data. I can give reference only to ddic structure. Is there any way to reference to a context attribute? I searched for this in SDN, but could find nothing.
I think I won't be able to use this way. What do you say?
As I read from forums maybe using OVS help will be suitable for me. But I have to use one search-help for all select-options fields. Do you know how I can determine the active select-options field and pass its name (for instance "werks" ) as parameter to this OVS search help. (Also I'll pass SID and LANGU.)
MY TABLE (ZBYYT080) CONTENTS:
SID     VARBL     VALUE     LANGU     VTEXT
ADS     $WERKS     1     T     Werk 0001
ADS     $WERKS     11     T     OZYAS GIDA URETIM YERI
ADS     $WERKS     5501     T     BOYA GEBZE FABRİKASI
ADS     $WERKS     5502     T     BOYA CIGLI FABRİKASI
AGT     $WERKS     2301     T     KAMLI DAMIZLIK
AGT     $WERKS     9601     T     PANAR DENIZ URETIM YERI
ADS     $VKORG     22     T     AA KİMYASALLAR
ADS     $VKORG     8001     T     İINSAAT BOYALARI
AGT     $VKORG     6500     T     DAMk St.Org
AGT     $VKORG     5400     T     PANAR St.Org.
I wish I'm clear enough..
I will be gald if someone answers me as soon as possible...
Thanks İn advance..
MERAL

Hi,
Your ques is how to refer to a DDIC search help to refer to selection screen parameter ?
Am I right ?
If Yes, then in the interface IF_WD_SELECT_OPTIONS
method ADD_SELECTION_FIELD, ADD_PARAMETER_FIELD etc
have importing param like I_VALUE_HELP_TYPE and I_VALUE_HELP_ID, I_VALUE_HELP_MODE, I_VALUE_HELP_STRUCTURE
etc which may help you to link your create DDIC Search help to selection screen params.
this is just a clue from my side. I haven't tried it myself.
You can go to the where used list of this method and find some sample implementations which use these params.
Hope this helps.
Regards
Manas Dua

Query variable : selection option with no interval

Hello,
Is it possible to define a query variable as selection option, with no interval (like in abap).
I am in 3.X version.
Many Thanks in advance,
Manuel

Hi Manuel,
This should be possible through multiple single value variables, but to ensure that the user has not in input the same charateristic value for exclusion and selection you may choose to write customer exit at the background.
I think interval and select option would allow 'To values'.
So I was wrong in what I said before. SORRY
However multiple single value would not allow exclusion, I think.
Your scenario would only be possible by excluding multiple single values in variable type select option and process the variable using customer exit, to trmove all to Values.
But you are right, you cannot have your scenrio handled , I think.
( ie multiple exclusion in from values with no To Values )
One more way is restrict your characteristic by two input ready variables, one select option for exclusion and have a customer exit to delte all inclusion that were input accidently and one multiple value ready for input variable.
But, all in all, there would be no straight drive through this I think.
Hope it helps,
Regards,
Sunmit.

Single Multiple select option in selection screen

Dear All,
I want to have single multiple selection functionality on the selection screen.I have used function module 'SELECT_OPTIONS_RESTRICT'. but my problem is it only allows to include single vals but does not give me an option to exclude single vals. how should I go about it. If you have some example or piece of code , i would be grateful.
Thanks
Amit

Hi Amit,
Where have you written this code?
It normally should be in AT SELECTION-SCREEN OUTPUT.
(Infact even in INITIALIZATION, try it out)
Also did you declare SELECT-OPTION with NO INTERVALS addition?
Here is a sample code that works,
REPORT zsritest.
TYPE-POOLS: sscr.
TABLES vbak.
SELECT-OPTIONS: so_vbeln FOR vbak-vbeln NO INTERVALS.
AT SELECTION-SCREEN OUTPUT.
DATA: s_restrict TYPE sscr_restrict,
s_opt_list TYPE sscr_opt_list,
s_*** TYPE sscr_***.
s_opt_list-name = 'EQ_ONLY'.
s_opt_list-options-eq = 'X'.
s_opt_list-options-ne = 'X'.
APPEND s_opt_list TO s_restrict-opt_list_tab.
CLEAR s_***.
s_***-kind = 'S'.
s_***-name = 'SO_VBELN'.
s_***-sg_main = '*'. "This will allow I/E signs
s_***-sg_addy = ' '.
s_***-op_main = 'EQ_ONLY'.
APPEND s_*** TO s_restrict-***_tab.
CALL FUNCTION 'SELECT_OPTIONS_RESTRICT'
EXPORTING
restriction = s_restrict
EXCEPTIONS
OTHERS = 0.
Sri
Message was edited by: Srikanth Pinnamaneni

Checking against Select-Options with "CP" using "IF value IN select_option"

Dear experts,
first of all: I'm sorry, if this question already should have been asked and answered!
I tried quite a lot of search terms but didn't find anything helpful.
We are using a statement like "IF value IN select_option" to perform comparisons after the Select-Options have been used in a SELECT statement. This logical expression fails (compared to the results of the DB-SELECT) whenever a select-option line contains the option CP (Contains Pattern). To be more specific: The case sensitivity of the LOW value doesn't seem to play a role any more. A variable with the value 'ABCD' would be positively checked against a select-option with OPTION 'CP' and LOW 'abc*', whereas this value wouldn't have been selected if the select-option had been used in a DB-SELECT.
Does anybody know a workaround?
Thanks in advance
Andreas

Dear Keshav,
it's an own field in an own table, defined as CHAR of length 140 (lowercase allowed), reflecting to a line of remittance info of an account statement. A regular Select-Option for this field is provided in a report which works perfectly fine regarding the case sensitivity. For reasons I don't want to point out in detail we need to check a value in this field against the select-option without selecting it from the db again.
Let's assume that a field remittance_info contains the value 'ABCD'.
A line of the select-option table looks like this:
select_option_table-SIGN = 'I'
select_option_table-OPTION = 'CP'
select_option_table-LOW = 'abc*'.
Then an ABAP statement such as
IF remittance_info IN select_option_table.
* would be true !!!
ENDIF.
but wouldn't deliver a result in a SELECT such as
SELECT * FROM my_table INTO TABLE my_internal_table WHERE remittance_info IN select_option_table.
because of the differences in lower/upper case.
regards
Andreas

Multiple select options in 1 drop down box?

Hi,
I have created a form that works perfectly except for the fact that I need to provide multiple select options in the 1 drop down box; for example, I'm asking what product the customer is interested in and his answer could be multiple items such as Soap, Sanitizer, Hand Towels, Face Cloths etc...
At the moment, the customer can only select 1 item not multiple.
Is this possible?
Thanks in advance for the help!

Hi,
It is not possible to allow the user to select multiple items in a dropdown list.
You could use a list box, which does allow multiple selections.
Good luck,
Niall
Assure Dynamics

Multiple select options for an input field

Hi All,
We have a requirement where in we need to provide multiple select options for an input field in a BSP application and get output relevant to all the given inputs(do not require range).
Please do let me know how to solve this.
Thanks & Regards,
Lavanya .

Hi,
The requirement is : Suppose there is a input field PLANT.
If we give input for plant it gives related output.
Now if it is required to give 5 or 6 inputs..like plant1,plant2...plant6 and get the output related to all 6 inputs.
(Like we implement in ABAP)
Please do let me know how can this be implemented in BSP.
Thanks & Regards,
Lavanya.

Multiple select option in the screen painter

Hi all,
I want to give multiple select option for a particular field in the screen painter.
how to provide it.
Nitin

Hi,
Refer to this link..[Select-Option in Dialog programming |Re: Select-Option in Dialog programming]
[How to make select option in module pool |how to make select option in module pool]

How to write select options with extension in module pool program

hi,
M having the following fields through screen painter.
1. sales offfice
2.sales district
3.customer no
for those three fields no extension is not provided and no search help is there.
i want write seletion options to get extension in that module pool
screen.
plese send coding for me , please let me know how to get that
select options with the above all three fields.
Thanks & Regards
Raji

Check it
In top include
DATA: number(4) TYPE n VALUE '9005',
PROCESS BEFORE OUTPUT.
MODULE status_9001.
CALL SUBSCREEN AREA1 INCLUDING SY-REPID number.
PROCESS AFTER INPUT.
MODULE user_command_9001.
CALL SUBSCREEN AREA1.
*&      Module status_9001 OUTPUT
      text
MODULE status_9001 OUTPUT.
SELECTION-SCREEN BEGIN OF SCREEN 9005 AS SUBSCREEN.
PARAMETER pa_bukrs TYPE t001-bukrs.
select-options matnr for wa_matnr.
SELECTION-SCREEN END OF SCREEN 9005.
ENDMODULE.                 " status_9001 OUTPUT

Creating a Select-option with no-intervals and a parameter on a single line

Hi
I have a unusual reqirment of creating a select-option with no intervals obligatory and a parameter on a single line. Is this possible? Can any one please provide me a solution for this. I reffered to the SAP help and what i found out is a single line can contain only parameters.

Hi,
humm,
I guess it's not possible on one line.
SORRY I've tried and it works!
Try this :
SELECTION-SCREEN BEGIN OF BLOCK main WITH FRAME
TITLE text-s01 NO INTERVALS.
SELECTION-SCREEN begin of line.
PARAMETERS : p_gjahr LIKE bkpf-gjahr OBLIGATORY MEMORY ID gjr.
SELECT-OPTIONS : s_blart FOR bkpf-blart MODIF ID knt .
SELECTION-SCREEN end of line.
SELECTION-SCREEN END OF BLOCK main.
Regards,
erwan

Multiple select options validation at selection screen

Hi,
I have the requirement to create a selection screen with 3 select options. Two of them are cross-dependent. It is mandatory to fill one of them and it is not allowed to fill both. The third one is optional. I tried the validation at selection-screen on block... and I have a problem that search help buttons for select options react like execution buttons, when I press any of them I am getting one of errors instead of search help.
Any help on this issue would be appreciated.
Here is my code:
DATA:
      so_rbkp TYPE rbkp,
      so_mseg TYPE mseg.
SELECTION-SCREEN BEGIN OF BLOCK blok WITH FRAME.
SELECT-OPTIONS:
        s_fakt   FOR so_rbkp-belnr,
        s_matdok FOR so_mseg-mblnr,
        s_god FOR so_mseg-gjahr.
SELECTION-SCREEN END OF BLOCK blok.
INITIALIZATION.
SET TITLEBAR '0100'.
START-OF-SELECTION.
AT SELECTION-SCREEN on block blok.
      if s_fakt <> space and s_matdok <> space.
        MESSAGE 'Message1' TYPE 'E'.
      elseif s_fakt = space and s_matdok = space.
        MESSAGE 'Message2' TYPE 'E'.
      endif.
    ENDIF.

Only perform the check when user wants to execute or submit the program, not when pressing F4 or even Enter, but in a selection-screen event, before START-OF-SELECTION which were program would terminate in error :
TABLES: SSCRFIELDS.
AT SELECTION-SCREEN OB BLOCK b01.
    IF sscrfields-ucomm EQ 'ONLI'
    OR sscrfields-ucomm EQ 'PRIN'
    OR sscrfields-ucomm EQ 'SJOB'.
      IF s_fakt[] IS NOT INITIAL AND s_matdok IS NOT INITIAL.
        MESSAGE 'Message1' TYPE 'E'.
      ELSEIF s_fakt[] IS INITIAL and s_matdok[] IS INITIAL.
        MESSAGE 'Message2' TYPE 'E'.
      ENDIF.
    ENDIF.
(You could also always send the message, but using type 'E' for those function code and 'S' status for any other value.)
Regards,
Raymond

Multiple Select options

Hi,
I have a requirement where i have to use to separate select options but the value of the 2nd Select option is dependant of the value chosen in the first select option.
For eg:First Select option is for SWCV and 2nd option is for Data Object.
If you choose S1 as SWCV in first select option then the values in select options for Data object should be populated for Data objects belonging to SWCV "S1" only an not for any other SWCV.
PS:Points will be awarded

Hi Sacha,
Is there any other way in abap web dynpro where i can achieve the above mentioned requirement.The catch here is that the user can enter multiple values.
Earlier user was allowed to have only one entry in inputfield so OVS used to solve my problem.But with multiple entries i can't do the same thing.

Reg : Multiple Select Option with validation.

Similar Messages

Maybe you are looking for