REG Mvt type related to order types

Hi
    For our Prod orders , goods receipt will done with mvt type 101. i need to create a new order type for which i need a new mvt type have to be used for goods receipt for those orders. is it possible to change the mvt type as required for goods receipts.
Regards,
PradeepM.

Hi,
    Such type of changes should not be preferred because it imapct alot.
As you see that it depends upon package & package not depend upon any field value, it depends upon table & fileld, so PP order type package should be same, so you can't give seperate package for a specific order type.
Order type package depends upon order category which u can check in OPJH, but u can't creat any new order category .
because it has alot of technical settings so SAP not allow it.
Now there is two way to resolve ur issue.
1.  Brief why you want seperate movement type, if u want it for information then there were alot of fields u can use in place making so big changes.
      If u want seperate GL then you can easily made it by introducing new valuvation class etc. so check ur original requirement.
2. If you hard & fast want to change Movement type then take it under process order category, and u can give seperate movement type for this order type, you can easily avoid control recipy in process order so it become very much similar to discrete order.
Thanks........Rakesh

Similar Messages

  • Reversal of Mvt type 552(MB1A) still doesn't reflect in the Process order

    Hello Experts,
    When i create in MB1A using  551 movement type(scrap), i fill the required entries Cost Center and Proces order then saved it. Checked the process order cost analysis (GO TO- COSTS - ANALYSIS- TARGET ACTUAL COMPARISON)there were values appearing in my total/actuals cost column.
    Then my issue is if i want to reverse the said document generated from 551 movement type using tcode MB1A or MBST, the value in the cost analysis is not changing((GO TO- COSTS - ANALYSIS- TARGET ACTUAL COMPARISON) in the process order.
    The reversal is done so it should be zero and no value is appearing in the cost analysis column.
    Also if you will check in the Process order- GO TO-LISTS- DOCUMENTED GOODS MOVEMENTS , the mvt type 551 only appears and no 552 even the cancellation is already performed.
    Thanks,
    Indra

    Which version of SAP are you using?
    Could you please perform same action in development using MIGO transaction code.

  • Automatic creation of Purchase order not possible for 103 mvt type

    Hi,
    If i could configure "create p.o automatically", while doing G.R for mvt type 101,
    why cannot i do the same with 103 mvt type.
    I checked the checkbox "create p.o automatically" for movement type 103 and tried to do G.R for others using Mvt type 103.
    It is throwing error as "Update control of movement type is incorrect (entry 103 x x).
    Which entry controls the above my requirement?
    Please advise .
    Thank you.

    Hi,
    These are std which is provided my SAP, you can configure for automatic PO creation for 101 movt type only..........

  • Field settings for MIGO without Purchase order - Mvt type -501

    Dear Guruz,
    in my present situation when i do MIGO with mvt type 101 i have to give delivary note as required entity.  But now i have a requirement where i have to create MIGO without purc doc  i.e mvt type 501.Also i ahve to provide the delivary note in the same.But when i am trying, it i see that The delivary note field is not present in the header part of migo(GR-others). field name: LFSNR. actually my requirement is i have to do the migo with a delivary note that is made mandatory for mvt type 501 also. I tried spro settings but could'nt find any solutions. Do i have to go out of SAP standard or is there any way that  i am unable to come up with as per standards?
    pl discuss

    Dear Krishna,
    In the 501 movement type there is a field available at the header level called as the recipient. Make the field mandatory for the 501 movement type with the following settings:
    SPRO - > Materials Management - Inventory Management and Physical Inventory- Goods Receipt -Define Screen Layout
    In this the screen layout can be changed under the general data. Make the recipient field mandatory. In this field the delivery challan can be maintained.
    In case the client want to change the name of this field from the recipient to "Delivery note" ask your abaper, The functionality is possible in SAP.
    hope it solves the problem

  • Auomatic TO creation and confirmation from PCN with 321 MVT type

    Dear Friends,
    I am facing following WM issue, Kindly go through it and reply me with your valuable solution.
    In my plant QM is active, so while receiving goods against any Purchase Order (MVT TYPE 101), all my stock goes to quality. After UD check, 99% material move to unrestrictd stock (321 mvt.type) and 1% used for quality (331 mvt. type).
    For an example if I have received 1000 kg material (which initially goes to quality), after UD 995 kg material come to unrestricted stock and 5 kg used for quality check.
    In my existing system for material document with mvt. type 321, one PCN is generated in the background, and using LT05 we make TO from PCN and confirm it.
    But is it posible to create the TO and confirm from the PCN (Mvt. 321) in the backgroung itself, i mean to say that while my QM user is doing UD, material document with mvt 321, one PCN and TO will be generated and TO will be confirmd in the background itself.
    I don't want to use LT05  separetely to make TO from PCN.
    Please reply me soon.

    You need to make the config settings here in ur system.
    SPRO > Logistics execution >  WM > Interfaces > Inventory Management > Activate Automatic TO Creation
    Assign the relevent setting to movement types...
    Hope thsi helps
    Thanks & regards
    AHP

  • Automatioc TO creation with mvt type 331(WM)

    Dear Friends,
    I am facing following WM issue, Kindly go through it and reply me with your valuable solution.
    In my plant QM is active, so while receiving goods against any Purchase Order (MVT TYPE 101), all my stock goes to quality. After UD check, 99% material move to unrestrictd stock (321 mvt.type) and 1% used for quality (331 mvt. type).
    For an example if I have received 1000 kg material (which initially goes to quality), after UD 995 kg material come to unrestricted stock and 5 kg used for quality check.
    In my existing system for material document with mvt. type 321, one PCN is generated in the background, and using LT05 we make TO from PCN and confirm it.
    But is it posible to create the TO and confirm from the PCN (Mvt. 321) in the backgroung itself, i mean to say that while my QM user is doing UD, material document with mvt 321, one PCN and TO will be generated and TO will be confirmd in the background itself.
    I don't want to use LT05  separetely to make TO from PCN.
    Please reply me soon.

    Use RLAUTA11 SAP Report - Create transfer orders for posting change notices automatically.
    Thanks & Regards,
    Sudhakar

  • Error while doing GI to cost center (201 Mvt type)

    Hi,
    While I tried to do Goods Issue to Cost center through mvt type 201. I get the following error.
    "Account type K is not defined for document type WA"
    Kindly help reg it.
    Regards,
    Vimal

    Hi,
    Go to OMB6 and maintain the Entry in this field is optional.
    Thanks & Regards,
    Kiran

  • Mvt type 313 Q via delivery not allowed

    Hi,
    We have a scenario in our priject where the material (project stock) has to be moved from a srorage location to the customer site which again has been defined as a storage location. For this we have enabled the stoarge location to storage location transfer stock transport order functionality. Now when I create a new STO (sloc to sloc transfer) document type UB a new delivery type XYZ to which mvt type 313 has been assigned gets determined properly. Then I create an o/b dely using Txn VL10B.
    The problem starts here. When I try to do the GI I get the following error:
    Update control of movement type is incorrect (entry 313 X X Q L _ P)
    Message no. M7226
    Diagnosis
    The system could not find entry 313 X X Q L _ P in any of the movement type control tables.
    Procedure
    Cancel current processing.
    Contact your system administrator.
    Action to be taken by the system administrator
    Check in Customizing for Inventory Management under Copy, Change Movement Types whether the entry is contained in the Update control view for the movement type.
    If the entry is missing, proceed as follows:
    For standard movement types, this means that the given process is not supported using the present data combination. Do not create any entries without prior arrangement with your SAP consultant. Otherwise, incorrect postings may result.
    For customer-defined movement types (beginning with 9, X, Y, or Z), this may mean that they have not been fully defined. Delete the movement type and re-create it by copying a standard movement type.
    This error is because of the mvt indicator L determined for which we do not have entry in update control in OMJJ. If I do this mvt 313Q and 315Q without a dely document it is allowed.
    Is there any other way to work this out?  Is there a way to add entry 313 X X Q L - P to OMJJ update control?
    We need to have the delivery document as the material is crossing country borders when it moves from one sloc to the other.
    Regards,
    V S

    313 is a  manual movmement which does not even allow a Q special stock.
    deliveries operate with automatic movements starting with a 6
    641 Goods issue for a stock transport order (Shipping)
    The quantity is transferred using a delivery in Shipping from unrestricted-use stock of the issuing plant to stock in transit of the receiving plant.
    The goods receipt for the stock transport order takes place using movement type 101 and can, if required, refer to the purchase order or to the delivery. If a purchase order item is flagged as a returns item in the stock transport order, you can post the goods receipt of the returns in the issuing plant with movment type 671.
    Possible special stock indicators:
    E, Q
    For the special stock indicators E and Q and for purchase orders assigned to an account, you must ensure that the quantity is not posted to the stock in transit of the receiving plant.

  • Message determination for 103 mvt type

    Hi all,
       Can any one please tell me the reason for "Incorrectly Processed" message output for 103 movment. We have maintained all the indicators and output tab is getting appeared in the material document, but the status of the message shows "red colour".
        We are not able to understand the reason for the incorrect processing of the message. Whether this is related to the "Print Parameter" which is maintained as Plant / storage location combination.
    thanks & regards
    Chaitanya Rayaprolu

    Hi sir,
    Iam new to SAP but juz giving a try to answer your question. 103 mvt type is for posting to GR blocked stock. ie. no accounting docs are generated. Are you trying to post to blocked stock or GR block stock.
    Pls note that both are different..!!
    Pls excuse me if Iam wrong...
    Thanks & regards,
    ashwin_.

  • Goods Issue Problem - Mvt Type 645

    I am trying to do Goods Issue - VL10B.
    Error message showing:
    1)Delivery has not been put away/picked (completely)
    2)The Storage location is not defined for delivery item 000010
    it is a single step automatic GR (Mvt Type 101). The material to be posted (XFF38) is a non valuated material with Accounts Assignment. We are trying to post the stock directly to consumption.
    Please help me
    Edited by: Vijay Kakani on Feb 25, 2008 4:26 PM

    Hi
    a material is intended for consumption/usage, the order contains an account assignment (for example, a cost center, project, sales order, etc.). For items to be posted directly to consumption/usage, Production or MRP, you can enter a recipient or an unloading point in the order. Both specifications are automatically proposed by the system during entry of the goods receipt. Note that you can change the unloading point, but not the recipient.
    if underdeliveries are allowed in the system, then The system interprets the quantity received as a partial delivery and accepts it as such. The system issues a warning message indicating that there has been an underdelivery.
    It is also possible to enter an underdelivery tolerance percentage in the order item. When a quantity of goods is received that lies within the underdelivery tolerance range, the quantity is interpreted as a partial delivery and is accepted as such. The system does not issue a warning message. If the quantity of goods received lies below the underdelivery tolerance, the system issues a warning message.
    If the underdelivery is not a partial delivery but a final delivery, you have to set the "delivery completed" indicator.
    In the Customizing system, you can define that the "delivery completed" indicator is set automatically if the underdelivery lies within the tolerance limits. In this case, the system interprets any underdeliveries within the tolerances as final deliveries.
    check the configuration for under delivery tolerance
    Hope this helps
    BR
    SK

  • CVD not capturing in GRN(101 mvt type) with reference to STO

    Hi Experts,
    This regarding the CVD not capturing at the time of 101 movement against STO.
    My scenerio is as follows.
    I am importing some materials. Import PO will be based on a pricing schema where no CVD or customs duties are maintained. Against that Import PO GRN (101mvt type) will takes place at Port plant(Maintained Port as a plant). Now STO will be done from the manufacturing plant setting port plant as the supplying plant.This STO also based on the pricing schema where the Customs duties as well as the CVD s are maintained. Miro for the BCD & CVD will be done based on this STO and then MB1B with 351 mvt type will be done .Then by analysing financial documents having the CVD and BCD entries will be generated at the time 351 mvt type. Then GRN (101)at the Manufacturing plant against STO will be done. But in the Excise duty field the CVD values are not capturing.
    Why CVD values are not capturing? Is it a std SAP functionality? If so please explain the logic.
    If not please guide me why it is not capturing.
    If Only at the time of 351 these excise invoice will be generated. How can I track the Invoice because during mb1b I am not supposed to put any vendor excise invoice number.
    Please analyse this scenerio and guide me with your experience in this Ocean.
    It will be helpful for me to tackle this issue raised by a client if you put some significant threads on this.
    Thanks & Regards
    Prabhul

    Dear
    It is not possible in standard SAP. use the MB_DOCUMENT_BADI.
    To get the order components use the COXT_BAPI_GET_DETAIL.
    Now while doing goods issue using transaction code MB1A and MIGO system has to do the check:
    If Quantity of issue in goods issue screen + Quantity withdrawn <= Requirement quantity then allow the transaction else throw an error u201CGoods Issue not possible for Requirement quantityu201D

  • MB1B, Mvt Type 351 not posting to "stock in transit"

    Hello Experts,
    I have created the STO. Now I am executing MB1B with mvt type 351. When I open the material document created, I look at the financial documents, the stock value has been relieved from the supplying plant and posted to the receiving plant. I thought  using the 351 mvt was to put the stock in a status of "stock in transit". Only when the receiving plant performs the goods receipt should the stock value post in their plant. Am I using the wrong mvt type or is there a setting I must do to be able to post a material to "stock in transit" status?
    Thanks in advance for your help!

    Hi
    check follwoing links
    [stock transit 351 movement type;
    )Make sto with t code:me21N at receiving plant.
    2)go to MIGO make goods issue agaist the above sto from the supplying plant (movement type:351)
    3)go to migo and make GR(movement type:101) at receiving plant agaist material issue document no or sto
    For this you need to maintain some configuration at
    SPRO: MM > Purchasing > purchase order > set up Stock transfer order
    check your settings at this node:
    "Assign document type . one step procedure, undelivery tolerance" mention supplying plant,
    receiving plant, document type and tick required check boxes
    Regards
    Kailas ugale

  • Using unloading point in MB1A mvt type 291

    Hi,
    How can I make the unloading point available for entry during goods issuance (MB1A) mvt type 291? I can't find the unloading point in the screen layout design in the Goods Issue folder in SPRO and I can't add the unloading point field in the movement type config.
    By the way, when creating reservation order using the same movement type the unloading point is available for entry.

    HI
    Go to OMJJ and select the 291 movement type and in field selection Enjoy you can add the the particular field ( Unloading point) and you can make here optional and required entry by selcting radio button. Check the field and add.

  • OMJJ - Account grouping - Add mvt type indicator L

    Hi
    Pertinent to;  The account grouping in movement type for 101.
    For the STO I have enabled the Goods Recipet using MIGO and mvt type is 101. But the Reference document would be Outbound delivery instead the STO purchase order.
    Now the issue is after GR the Stock account is not debited as the movement type is not configured for Outbound delivery based GR.  How do i add the movement type indicator "L"  Goods movement for delivery note in OMJJ-Account grouping ?
    Currently only for F & B not for L.
    Thanks in advance
    Regards
    RG

    Hi,
    The Process flow is Stock Transport Order --> Outbound Delivery --> Goods Receipt
    So Outbound Delivery has a link with Stock Transport Order i.e. Receipt Indicator "B" so during GR against OBD it will consider B, no need of maintaining L and also it is not possible.

  • Restriction of goods reversal with 262 mvt type in MIGO

    Hi,
    During goods reversal using mvt type 262 with reference to a production order, we are able reverse any amt of qty, I want to restrict the reversal to the extent of other than confirmed qty.
    Eg. Order qty 10 EA, GI done 10 EA (BOM 1:1), confirmed qty 5 EA. I should be able to reverse only 5 EA or less and not more, as 5 EA already consumed.
    Regards,
    Jagadeesh.

    Jagadeesh,
    This check can only be possible using user exit "EXIT_SAPMM07M_001" of Enhancement MBCF0002, you can write your logic in Include ZXMBCU02.
    Regards,
    Prasobh

Maybe you are looking for