Reg : Navition to FB03 Transaction through SAP Query
Hi Experts,
I have developed a SAP quesry for BSIS table with Clearing Doc ( which is always blank value) and Acct doc in the output list and I have made this report as interactive ( RRI- Report/ Report Interface ) to navigate to FB03 whenever a line is selected. It is working fine in 4.6c system but now we have upgraded to ECC which is given an error message 'Enter the document number'. I have check with OSS notes and relevant details but I could not find the solution for this.
Please help me with some suggested solutions on this.
Thanks in advace.
Regards,
Srinivas
Not possible as bith the data elements are same...
Similar Messages
-
Transaction ME80FN, SAP Query ME80FN, and logical database MEPOLDB
I am looking at transaction ME80FN. Is that from the global query /SAPQUERY/ME, ME80FN? I was told that ME80FN was from SAP Query... but doubts are creeping in.
SE93 shows trans. ME80FN as Program RM06EAAW and no logical database. RM06EAAW has different headings and an additional toolbar in the results screen.
Did RM06EAAW get generated from SQ01 ME80FN?
I have to modify the ME80FN transaction output by adding a field to the PO History display, which is selected from the bottom toolbar, rightmost button. I guess I have to go with RM06EAAW as the starting point(?).
We are on 4.6B Any suggestions are welcome.
ThanksThese are what I am dealing with:
Transaction ME80FN
/SAPQUERY/ME, ME80FN query.
Another way to word the question is: How can I make a copy of the global query /SAPQUERY/ME, ME80FN to have that nifty bottom toolbar that transaction ME80FN has?
At first glance, they are the same entity... But the toolbar in the transaction and display options via the last button on the toolbar differentiate the two.
Thanks.... -
REG: Employee Full & Final Settlement through SAP
Dear All,
We have oflate implemented SAP HCM ECC5.0 version. We have started running the activities like payroll, personal actions etc throu it.
As on date we are running the seperation actions through PA40 but unable to run FFS through SAP. Could anyone help me in telling the process how to run Full & Final Settlement in SAP.
The entire system is configured, but we are unaware of the t.code and process we need to follow for doing the same.
Pls. Advise on the T.Codes and the process we need to follow.
Thanks,
SrikanthHi Srikanth,
This link gives you complete details of Termination work Bench.
http://help.sap.com/saphelp_erp2005vp/helpdata/EN/dd/38a63a04227748e10000000a11402f/frameset.htm
Regards,
Evani -
Reading Archived Data Through SAP Query Report
Dear SAP Gurus,
My client archived their SAP data in a particular year range and all the Z reports have to modified to read these archive data. Normal ABAP reports can be modified to read the archive data without no problem.
But there are two Z SAP query reports which should be modified the same way so it will be able to read archive data.
What is the best method for this? Does SAP Query tool provide facility to read archive data? or do I have to append the code?
Thank you in advance for your help
Regards,
Isuru Fernando>
Isuru U Fernando wrote:
> hi Manthan,
>
> Yes I used these FMs and read the data without any problem for normal ABAP reports.
>
> But SAP query report is the problem. Is it advisobale to modify the SAP query generated report source code? since it is a system generated report.
>
> Regards,
> Isuru
No, do not adapt the SAP generated report source. The reason is: every time someone re-generates the query from tx. SQ01 your changes will be lost.
You could add the functionality Manathan gave you to add to the infoset of said query - but to be honest: in my opinion that is shooting nuclear rockets at flies. Also you run the risk that every change of the infoset (add a join/delete a join) requires adjustment of said coding you applied ... and where will you be then? Fancy repairing the same query over and over again? Try talk sense to your client - go for a Z-report here ... -
Launch CRM transaction through SAP Web Client UI
Hi,
We would like to incude transaction "S_AE2_89000019" from CRM to SAP CRM WEB Client UI.
We have done the following steps using the SAP best practices (C04-Configuration guide):
1. in transaction CRMS_IC_CROSS_SYS we have configured the CRM system with url: http://CRMnameServer:httpport/sap/bc/gui/sap/its/webgui/!?transaction=IC_LTX&okcode=ICEXECUTE
and ERP system with url
http://ERPnameServer:httpport/sap/bc/gui/sap/its/webgui/!?transaction=IC_LTX&okcode=ICEXECUTE
2. we have set TSTC to synchronous (CRM and ERP)
3. we have configured transaction launcher through wizard (tx CRMC_UI_ACTIONWZ)
4. we have created logical link for transaction and we assigned the link to work center and business role.
The problem is that when we are opening the SAP CRM web gui and click on the link that we have created, we take a blank picture with a red x "PLease wait..." and nothing else opens.
Can anyone help?
Thanks in advanced.Hi,
please also check the information in this very good blog:
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/3059fb20-987f-2e10-ef82-d147b9b5e8b4|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/3059fb20-987f-2e10-ef82-d147b9b5e8b4]
Kind regards
Manfred -
Executing BLS Transaction through Xacute query template?
Hi Experts,
Am having a SQL query template for which am passing value from web page after user input and i have added this SQL in my BLS transaction in illumSQL action block. I have created Xacute query template and display template(iGrid) for displaying output from transaction.
Problem am facing is that am not able to execute my transaction after passing values to SQL query. How to get this working?
Regards,
Ravi ShankarHi som sarkar,
Let me explain my problem this way, let say am having SQL Fixed query and am doing some field selection based on the parameter which is been passed to the query template.
-Checked the query template returning values, working good.
created one Display template to display whatever been fetched by query template(iGrid).
-Generated applet working good.
Now if i pass the parameters from webpage to SQL query(parametes are mapped in query template) and update the grid, it should work right but its not...
Thats what i was trying to ask you so far.
Regards,
Ravi Shankar -
Selection screen modification in case of SAP Query
Hi All,
I want to modify the selection screen in a standard progam.
This program is getting generated through SAP QUERY.
i want to modify some fields and also delete some fields in the
selection screen. All these fields which i want to modify or delete
are the logical database fields.So i can't do it through the t-code SQ01
and SQ02. Also this is a program generated through the SAP QUERY,
so i can't modify the generated code. Request if any one of you can suggest me to solve this.
Waiting for a prompt reply!!
Thanks,
RupeshGo to SQ02
Select your Infoset-->Change
On next Screen.
Select GoTo->Code->Initialization.
Write there code
LOOP AT SCREEN.
IF screen-name EQ 'SP$00004'.
screen-required = 1.
MODIFY SCREEN.
ENDIF.
ENDLOOP. -
Sap query output to save on application server
Hi All,
I have one requirement, want to save the output of sap query on application server as a text file?
Is there any work around?
Regards
Vasumathi
Edited by: komma vasumathi on Nov 5, 2009 10:32 AMHi Vasumathi,
Application server path cannot be accessed unless otherwise using OPEN DATASET. More over, Infoset cannot be executed directly. It can be accessed through SAP Query only.
Writing Logic for 2 or 3 tables with Inner Join will not be a big deal. Writing Abap program will be optimum for you FTP requirement.
1. create a folder in AL11 as \sap\common\
2. create z program and Declare sel-screen parameters : selopt1, selopt2
3. Query : Select Afield1 Afield2 Bfield1 Bfield2 from table1 as A inner join table2 as B on Afield1 eq Bfield1 where Afield1 in selopt1 and Afield2 in selopt2 into corresponding fields of table itab.
4. creating file at application sever
w_fileloc = '\sap\common\file.txt'
OPEN DATASET w_fileloc FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
. Loop itab into wa_itab.
Transfer wa_itab to w_fileloc.
clear w_fileloc.
endloop.
5. goto AL11 and check the file file.txt in folder \sap\common
Please let me know if you need more information or close this thread by offiering the points( If you are satisfied).
Regards,
Sakthivel N -
SAP Query as extraction tool - any benchmarks 4 throughput/volume constrain
We are looking to use SAP Query as our extraction tool to create a large dataset for downstream systems. We also will allow the users of those systems to access our SAP system (4.6C) through SAP query for custom extracts. We plan on controlling this by custom coding our own logical database.
Has anyone out there got any benchmarks/metrics/success stories on any other SAP client that might have already done this? Our concern is that SAP Query cannot handle the volume we need to pull from the system, so we need to determine what the choking points of this solution is.
Please advise.
Thanks,
Gareth de BruynHi Gareth,
I already used sap query in the way you want. Additionally we added lots of abaps to the query as our extraction modules. Everything works fine. At least you will be able to do delta updates ...
The only issue we faces right now was, while loading time dependend master data. Therefore you have to load the data to PSA first and then you can update your infoobject. But there is an oss note out for this behavior.
regards
Siggi -
SAP QUERY(SQ03/02/02) - how to join tables
Hi MM Wizards,
I would like to know how to join tables EINE & A017 through SAP Query?
Thanks,
KaveriHi Kaveri,
A017 is a pooled table. SAP Query does not support joins against Pooled tables. You should stick to transparent tables if you want to use Query.
You can do a direct read of A017, but you will just end up with a glorified SE16 display.
You could have a programmer write some ABAP and place it into the 'extras' section in SQ02 to grab the additional data that you want, but once you have decided to enlist the aid of an ABAPer, it is better just to write a custom Z program from scratch.
Regards,
DB49 -
Issue in transaction code creation for sap query report .
Hi Gurus,
I have a requirement to create transaction codes for sap query reports. I found two ways to create transaction code for sap query report
1) By Generating program for sap query report and creation of transaction code for that generated Program. in tcode.
2) By using parameter transaction options in start object of se93
What are the difference between creation of these two ways. Please specify the advantages and disadvantages of both methods.
Regards,
Suneel Kumar Uggina.Hi Jogeswara Rao,
But I am getting problem while transporting form development system to the production system. After transporting to Production system I have used the code created in development system, but it is giving Error ' No Program Found for that Transaction Code. And I would like to know on what conditions should I have to use the First one and as well as a second one in sap query reports.
Thank You,
Suneel Kumar Uggina. -
Transaction code for SAP query reports
Hi All,
I am trying to create transaction code for sap query report but couldn't go further.
1) Created User group in SQ03
2) Created infoset in SQ03 and assigned that to the user group
3) Created query in SQ01 using the infoset.
I executed the report in SQ01 and it is working fine.
Now I try to create a transaction code in SE93 using the steps mentioned in the following link:
Assign transaction code to SAP Query (created via SQ01)
But when try to execute the report using the transaction code, it is giving error message 'User group xxxxxx is not yet created'
Could any one advice me if I miss something? Or please help me to create this transaction code and transport to production?
Thanks in advanceHI,
based on the thread you've already mentioned:
In SE93, Create a Paramter Transaction
-> Transaction = Start_report
-> In default values, give the below details:
D_SREPOVARI-REPORTTYPE = AQ
D_SREPOVARI-EXTDREPORT = Name of the Query
D_SREPOVARI-REPORT = User Group
So check if the user group is typed correct in SE93 and check also if the user group exits in the system where you are trying to run the transaction.
best regards, Christian -
Transaction code thro' SAP Query for customer spefific report
hi experts,
how to create transaction code (using SE43-) for the sap query created on own??
I have created the following required for a customer specific report
1.Infoset thro sq02
2.user group thro sq03 and assigned it to infoset
3.query thro sq01 and saved it with text
earlier i have used logical database PNPCE ( relevant for PA and payroll modules reports)
using sq01 , go to basic list , selected required infotypes and fields and
then selected, SAP List viewer for viewing and i get the report.
Now my question is how to create a separate transaction code for this sap query which i created
should i use SE43( area menu maintenance and area class???_)
should i create a variant and go to SE43??
advice solicited
snrHello
when you excecute the query in right han side corner you can get the program name
go to se80 select program & type this name and then you can create a tcode for that prog in SE80
reward points if helpful.
the prog name will be something like : AQZZ/SAPQUERY/* " ur query name
you can search for the name also in this manner -
Require TCode used by user for sap query created through SQ01
Hi All,
I have number of SAP Query in production that currently are used by different-2 user & created through SQ01
My question is how to know the TCode that used by user for SAP Query.
Thanks In Advance
Regards
SanCharlie
You did not get the question.
I knew the TCode of the query which I had created using tcode SQ01. user is using this query to see the report
Like I created query named 'order_line_details'. This query is basically to see the order & other details. To use this by user one TCode'zncv_ord_item' has been created.
So in the system lots of query are available. So i want to know the Tcode for those query that are using by user.
Thanks in advance
San -
Hi All,
I have created a Query in SQVI transaction, How to assign a transaction code for it.
Thanks in advance
Rajuhi,
follow the link:
http://help.sap.com/saphelp_erp2005/helpdata/en/b7/26ddebb1f311d295f40000e82de14a/frameset.htm
you will get full information about SAP Query.
There is no SQV1 transaction.
SQ01 --> maintain query
SQ02 --> maintain info set
SQ03 --> maintain user groups
he SAP Query application is used to create reports not already contained in the default. It has been designed for users with little or no knowledge of the SAP programming language ABAP.
SAP Query offers users a broad range of ways to define reports and create different types of reports such as basic lists, statistics, and ranked lists.
Features
The SAP Query comprises five components: Queries, InfoSet Query, InfoSets, User Groups and Translation/Query.
hope this may help you,
regards,
srinivas
Maybe you are looking for
-
5.4 Adjustment brus bug + File export naming bug
There appear to be two bugs in 5.4 1. I just finished editing an intense adjustment brush edit. I went to tweek it when I opened the brush there are no pins to activate even though the edits are there. 2. Export file naming not working correctly. I a
-
SAPUI5 Development Environment Installation Issues
Hi I am new to this development environment and am experiencing problems installing the Eclipse environment, the way I understand it once I have installed Eclipse I need to install UI5 Team and UI5 Tools packages, I did manage to install the UI5 too
-
Hi All, Our Client -Server project which downloads the content from server using bluetooth. We are using OBEX protocol for communication using avetana bluetooth implementation for j2me. It works fine on Nokia 6600 and Nokia 6233.But when I try to tes
-
Application loads (1 second) then disappears. Help!
I have NO Java experience. I'm just trying to run a Java (data base query) application that I have downloaded. I'm trying to run a .jar application called sdssQA v 2.2.25a located at: http://cas.sdss.org/dr4/en/help/download/sdssQA/pub/sdssQA.jar I'v
-
Feature Request: Resume Auto Play after a Trigger is Clicked (in a Slideshow Widget)
I think the thread headline says it all.