Reg-Number Ranges - Inventory

Dear Gurus,
Good Morning everybody,
My issue is like this,
We have a inventory number range in calendar year basis; we have changed the number ranges on 01st Jan 2008 and assign new number ranges for 2008. Now we got request from plant to do the physical inventory. When I saved MI01 document created as 2007 number range.
Ex - I have assigned current number for 2008 1xxxxxx100 but system is taking 1xxxxxx50 is new number and I am receiving mail like this
Update was terminated
System ID....   PRD
Client.......   400
Transaction..   MI01
Update key...   477FF86EECD30517E1000000C0A80197
Generated....   07.01.2008, 09:38:04
Completed....   07.01.2008, 09:38:05
Error info...   00 671: ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC.
Why system is taking 2007 number range. How can I resolve this issue?
Reg/ Shankar G.
Edited by: Shankar G on Jan 7, 2008 5:33 AM

Hi Shankar,
Can you do the following check in production cleint:
1. In the place where you configured the new number range, can you check the old number range is upto what year.
ie. in t-code SNUM for object MATBELEG check the number range year.
Example for the 1xxxxxx50 number range if the year is 2007 then till 2007 calender year is over the same number range will be picked up.
In such a case, you have to delete the 2007 record itself, and create a new record with year 2008 and give the new number range.
Please let me know if the above update is not clear to you. give me call at 1-408-368-1370 if you need further help.
Thx,
MJ

Similar Messages

  • Reg:Number Ranges

    Hi SD Experts,
    I have assigned Number ranges to my Sales document. I raised a sales order & save it.Ex-Sales Order no 12345.Due to some reasons the customer had rejected that order.So i deleted that order in VA02.Now I want to use this no 12345 for other order.
    Actually In SAP Standard it is not possible.Just want to know if their is any another way to achieve this.
    Looking for your valuable suggestions
    Regards
    Pradeep
    Edited by: Lakshmipathi on Nov 23, 2011 8:16 PM
    Thread Locked - Reason Duplicate Post

    Hi Pradeed,
    One idea, but I'm not sure that it will work.
    Set an external range number. Use the FM NUMBER_GET_NEXT (as SAP does in MV45AF0B_BELEG_SICHERN). Remeber to use NUMBER_CHECK to check if you are using the ID for the invoice.
    After, when you delete a SO, use USEREXIT_DELETE_DOCUMENT in MV45AFZZ. Write the value of VBELN in a customer table (Z-TABLE). Before to use NUMBER_GET_NEXT, try with the first value in this Z-table, run NUMBER_CHECK and avoid the use of NUMBER_GET_NEXT. Delete the record in the Z-table if it works right.
    I hope this helps you
    Regards
    Eduardo
    Edited by: E_Hinojosa on Nov 23, 2011 11:40 AM

  • Number ranges for material document (migo) and inventory  documents

    Hi Gurus,
    We need a different number ranges for goods receipt documents  and inventory documents because we have different company merged in to one box.Can any body tell me on what basis we differenciate the number ranges how to configure it.
    If we take PO, we have different doc types and we assign number ranges to those documents. in case of Miro , it  is the single transaction code used by different companies and how to give different number ranges.
    Regards,
    Sri........

    Hi,
    I think number ranges of inventory documents are on client level not on company code wise . because even though  your creating new document and assigned different number ranges for the documents but  these while assigning  ranges to T codes (MIGO or MIRO) you dont have option like company codes ( tcode OMBA) so number ranges for inventory documents are at client level  not at company code level.

  • Maintain number range interval "01" for inventory documents

    hi,
    when i am creating a physical inventory creating document t.code LI01 i got this eror:
    Maintain number range interval "01" for inventory documents.where i have to maintain please reply me.
    naveen

    hi,
    spro->log.execution>warehouse mgmt->activities->physical inventory---->maintain number ranges.
    Regards,
    velu

  • View Table to update Physical Inventory Number Range.

    Hi,
    I am looking for the 'View Table' Name to update Physical Inventory Number Range in OMMB transaction.
    I will have to do it using SM30 as OMMB is display only.
    Thanks

    Hi,
    OMBT still cant help me because I dont have write access on this client.
    Are you aware on how to get the View Table to Maintain Number Ranges for Physical Inventory?
    Thanks,
    Rohit.

  • Missing Number range when trying to create inventory sampling

    Hi,
    I tried to create an inventory sampling (Transaction MIS1). I selected a Inv.sampling profile and wanted to save the setting. However I get an error message saying:
    For object MATBELEG , number range interval  does not exist OMBT
    Looking at that TCode OMBT i do have set number ranges correctly.
    Since there is space between the MATBELEG and teh comma I believe that at some place a MATBELEG is set to blank, where it cannot find any corresponding numberrange.
    How can I resolve teh problem??
    Thanks fpor your help
    Torsten

    number ranges are stored in table NRIV  object MATBELEG
    Number ranges can be transported (but only with big care). it can be done from OMBT  menu Interval > transport.
    you will get a warning (which should better be an error)  because you transport not only the interval, you transport as well the current number and that will screw up your production system.
    better have your basis team open production for a short time frame for customizing ( can be done in SCC4 ) and do it directly in PRD.

  • Maintain number range interval "" for inventory document --help!

    Dear all,
       I running the FM - L_INV_DOC_CREATE for creating the physical inventory doc for WM ( warehose management ) level. But i get this error -> Maintain number range interval "" for inventory document. If i try to create it using the t-code  LI01N,everything goes smoothly. Anybody haf any idea how to solve this? thank you.

    1.Did u go into Number ranges for WM?
    Yes
    2.Did u click on assignment & number ranges not on Number range intervals
    Yes
    3.Di du cahnge it to 02 for all?.
    Yes on first warehouse 111 all changed to 02 and on warehouse G02 just on TR and TO changed to 02
    4.Did u select NR intervals? and give the number range?
    Yes
    5.Did u transport the intervals?
    No, as I am working on DEV practice client. Dont need to transport.
    6.Did assign the number rabges to ur Warehouse?
    I assigned No. 2 to warehouse, not number range, can u ellaborate more on number range assignment.
    I created migo for same material with different storage location and material and accounting documents are created. Even the number ranges are working on another warehouse created by colleague, but its not working on my warehouse and as mentioned earlier this is Dev practice client. No need to transport.

  • Inventory doc. number range

    Hi,
    I try to create inventory document for 203 and 204 warehouse, but I canu2019t. There is warring message (Maintain number range interval u201803u2019 for inventory documents).
    With Regards,
    Jaheer.

    Hi,
    Goto IMG> MM>InvMgmnt and PhyInv>Number Assignment..
    Define and Assign number assmnt..
    That will solve your problem.
    Edited by: Antony anburaj on May 1, 2010 2:19 PM

  • While making inventory number range dis order

    Dear all ,
    While making inventory number range did not generating in orderly .
    It slips.
    Example ....  100038201,  100038202,  100038300
    Please provide the solution for this one ...
    Srithar K

    Hi,
    Let it be any kind of number ranges the case will be the same
    Your problem is that th other numbers are geting buffered.
    Goto tcode SNROand select the Object according to your requirement like vendor or material etc and click on change option and look into number of numbers in buffer there you can see some number other than ZERO.
    Here you need to make this field ZERO and save.
    Now onwards what ever transactions you do for that object you can see the sequential numbers starting from the existing number.
    Object for physical inventory in tcode SNRO is HUINV
    Make no. in buffer 0 for the above object for your requirement.
    Thanks.
    Edited by: Madhavi.n on Sep 15, 2011 2:17 PM

  • Reg: Vendor Account Group Number Range

    Hi Guru's,
      I have created 3 Account groups for vendor -
    MV- Material Vendor , SV - Service Vendor , Ov - One Time Vendor
    And i need to number range (external) like this for MV- MV10000 to MV19999 and SV - SV10000 to SV19999
    i tried by XKN1 but the system says Enter the intervals without overlap .
    Guide me to achieve this.
    Thanks in advance
    Regards
    Anand

    Hi
    Thanks for your solution.. It means my intervals falls under a to zzzz.
    i have a query A to  ZZZZZ is alphanumeric or alphabetic?
    Can we set the range only as alphabetic .. that is no numeric is allowed .
    Regards
    Anand

  • Reg. Number range table problem

    Dear Friends
    During request move from development to Production unfortunately Tabel NRIV is moved and all the number ranges is collapsed but data is exist, I want to restore the same as old. Please help me.    And is there any tcode to see all the last document number for the year 2011.
    Please help me
    Thanks
    Rajakumar.K

    You can find last number from report(for example purchase order - ME2N) which will be current number,
    Go to SNRO,for example purchase order, enter object - 'EINKBELEG',Click status(pencil icon),
    enter last number which is current number for internal number range(Also refer internal number range assigned to document types).
    Repeat above step for objects carefully one by one.

  • Reg. PR number range vary

    I create PR that gives PR No. 0010015899, I checked with OMH7 there is the current 10015908.why It do not show the same PR number which was created currently. Please help me
    Rajj

    hi
    U might have maintained buffreing for PR number range
    Check SNRO with BANF as type
    Generaly 10 is maintained as buffer
    This number determines how many numbers are reserved in the application server buffer for the intervals.
    also check SAP note <b>Note 62077 - Info: Internal number assignment is not continuous</b> for more detail
    Vishal....

  • Reg. PR Number range display vary

    Dear all
    We want to change our PR number range,For that I went to OMH7 there I created
    one new number range. But It did not change.If I create PR showing one number which is differ from the current showing at OMH7.Both are not same.How to correct it. Please help me
    Rajj

    if u wnat to know how to check buffer
    then go to snro
    put BANF in object
    click on change
    No. of numbers in buffer in this field u will get number
    if u remove the nuber from hear
    u will get ur current number correct
    hope this will help
    Reward if usefull

  • Reg. Invoice number range creation for MIRO entry

    Dear Friends
    How to configure number range for invoice (i am receiving goods against purchase order). Pls help me
    Thanks
    Rajakumar.K

    > How to configure number range for invoice (i am receiving goods against purchase order). Pls help me
    Hi, Use T-code OBF4, Scroll to Doc type 'RE' which is standard used for Invoice of PO, double click on it, number object will be 51, then click on tab next to it 'Number range Information', enter your company code & maintain the Number range for Intervals, 51 & Year & then Numbers.

  • SAP table for material document/inventory document number range.

    Hi Gurus.
    Good day.
    Please help. What is the SAP table for number range? Thanks in advance.

    Hi Acel,
    The table NRIV should fetch you the data you are looking for.
    Regards,

Maybe you are looking for

  • Need help in implementing a note

    Gurus ,   i need your help in implemnting the SAP NOTE "873422 - Error when sending an e-mail" I am not suer how to proceed to implement the correction speified in that note . it would be of great help if any body can explain me in brief  to implemen

  • Managing 2 iPhones with iTunes and one iTunes account and computer...

    Hello All! I already have a 16GB 3G iPhone and we're going to be getting another 3G for my wife (whether it is 8GB or 16GB is still to be decided). On my phone, I have about 13GB used, with the primary source being music. We intend the same iTunes ac

  • Hide password from exposing on the command line(ps)

    Oracle Go to http://www.uaex.edu/srea/ and search hide.c. I may need another file, os.h, which is #included in hide.c program. hide.c handles simple program well. but, not XMLImporter/XMLExporter.

  • Locked by a template

    I am trying to put this just so photo album on a page and it says it cannot do it because of code that is locked by a template. What can I do to my template to make this album work. I must have done something inadvertently to this template, because i

  • WINDOWS 7-NEED HP COLORLASERJET 2840 SERIES PCL6 DRIVER-LOT OF $$$ IN 2840

    My 2840 worked with XP but won't print in windows 7.  I tried all the HP fixs and the driver in windows 7 to no avail.  Any help?