Reg: Open and Closed Activities in DTR

Hello Guru's,
I am confused with the Open and Closed Activities in DTR, What are the significance of these activities?
And when does an Open Activity changes to Closed Activity?
And why does an Empty Open Activity gets created?
How does the Open Activities effect the Performance of the system?
In NWDS what is the significance of the Public Part and the dcdef xml files?
Please explain and if possible send the links to better understand these? I tried searching for info but with no luck.
Appreciate the Help.
Thanks & Regards,
Pramod

Dear Pramod,
Activity in general can be considered as the wrapper of your changes.
While working in NWDI, any modification that you perform on your source code must be associated with an Activity.
Some Definitions:
Client DTR: Represents the Local Track file system present on you local machine, where Checked-out a desired code from Server DTR
Server DTR: Represents the Central Repository present on the server, where your source code is checked-in.
Open Activities
These are the activities that are not yet checked-in to Server-DTR, and they represent the Open Version.
Exmple:
1) Suppose you have made some modification in "File A" which is associated in Activity-1
2) When you open the DTR Perspective in your Developer studio, you will be able to see all the changes that you have associated in the Activity-1, this DTR-perspective of your NWDS is also termed as Client-DTR.
3) But, when you open the Server-DTR in DTR Web interface, you will not be able to see the same file structure that is present in your client DTR, it will not contain the changes that you have incorporated in Activity-1.
4) The changes present in Activity-A are not available to any other developers, even if you try to use the same developer ID and load the same track, the activities are still said to be purely Local.
Closed Activities
These are the activities that are already Checked-in to Server-DTR and they represent Closed Version.
Example:
1) In the same example explained above assume that we now Check-in the Activity-1.
2) Now, if you open the Server-DTR in DTR Web Interface, you will be able to see the same file structure that is present in your Client-DTR.
3) Now the changes that were present in Activity-A are also available to other developers too.
Open Activity and Performance
1) Open Activities create a temporary entry point reference on the Server DTR you can serach for open activities in Secer DTR web interface, every single activity occupies space on your local machine. So it may affect the performance only if the activity count is very high.
2) In the local file system, the meta data is stored in the .dcdef file in the _comp
subfolder.
3) The meta data is stored in the .dcdef file, every public part has its own meta data file. They are located in the def subfolder of the component and have the fileextension pp.
Every component (DC) is defined by a set of files, stored and versioned together with the
component in the repository.
u2022 A file with the reserved name .dcdef stores the basic attributes such as name,
description and component type, the parent component (if there is one), a list
of child components (if there are any), a list of dependencies, links to the component
sources, and the access control list. The .dcdef file must be stored directly
in the _comp folder.
u2022 The folder _comp/def contains one file for each public part of the component,
which carries the name of the public part with the extension .pp. This file contains a list
of the development objects belonging to the public part and an access control list for
this public part.
Both .dcdef and .pp files are stored in an XML-based format; you can display them in the
content display of the Repository Browser or with any text editor. However, this is
not necessary. To create and edit these files, use the component tools of the SAP NetWeaver
Developer Studio.
In exceptions, you can manually repair the .dcdef or a .pp file of a component.
Note that direct manipulations are dangerous and can render a component
unusable.
I hope you will get a clear picture now.
Regards,
Shreyas Pandya

Similar Messages

Reg:Opening and Closing Stock For Plant

Hi All,
i want to calculate the opening stock and closing stock for plant wise for the given Posting Period Date.
Am having the opening balance and closing balance for all months but i need it as month wise.
considering this example,
the date is from 15.01.2010 to 15.03.2010 and for one plant
considering this example,
am having the opening stock from as 15.01.2010 to 15.03.2010 as 10,000 and the closing stock as 15,000.
but i need in month wise like below,
from 15.01.2010 to 31.01.2010 what is the opening stock and closing stock?
from 01.02.2010 to 28.02.2010 what is the opening stock and closing stock?
from 01.03.2010 to 15.03.2010 what is the opening stock and closing stock?
this is purely based on plant wise and not material wise?
could anybody say clearly how can i acheive this scenario?
i have referred MB5b,mc.9 transaction programs but still confused how to go with plant wise for a particular period?
Thanks & Regards,
Suresh
Edited by: suresh suresh on Mar 24, 2010 10:15 AM

Hi,
Refer to link below:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/c1/3766e7449a11d188fe0000e8322f96/frameset.htm
Regards,
Venkat.

Account Team Members and access to Open and Closed Activities

Is there not a way to allow account team members access to view other members on the teams activities?

If you are the owner of the pertinent Account, then for the other users on the Account Team, the Default Access Profile would be applicable, which you should change.
For the Account record type, the access level can be kept as anything (read only, read/edit or read/edit/delete). In the related information for the Account record type, have the access levels of Completed and Open Activities as View.
So, if you add the account team members in the Users section in the Account activities, the activities (appointments/task) would appear in each of the user’s calendars and tasks section.
Aditya

Reg : Viewing Opening and Closing remarks in the document

Dear All,
In any document (Sales Quotation, Sales order etc), while right click we can see Opening and Closing Remarks. I have entered Opening and closing remarks. But am not able view in the screen. Where i can view the same in the respective document.
Please do the needful
Thanks & regards
Venkatesh N

Hi,
You can check Note No. : 1038129 and 1289493 regarding the question asked by you.
Kind Regards,
Jitin
SAP Business One Forum Team

Opening and closing of year end

Dear all,
Pl what are the transaction code used for the opening and closing of year end activities. in fico module . what process we have to take for open and close the period open .
girija

hi
Year End Process
All the Month end Activities should be Carried Out.
Balance Carried Forwarded to next year(F.16)
PCA Balance Carried Forward(2KES).
Carry forward the Vendor,Customer and Asset Balances
(Unless Dep is posted for all the months the assets can not be Closed)
Copy the No Ranges to new year
Open the Next year period(OB52)
asset accounting
oaar
ajab
ajrw
material management
omsy
mmpv
Thanks & Regards
phaneendra

MB5B Report table for Open and Closing stock on date wise

Hi Frds,
I am trying get values of Open and Closing stock on date wise form the Table MARD and MBEW -Material Valuation but it does not match with MB5B reports,
Could anyone suggest correct table to fetch the values Open and Closing stock on date wise for MB5B reports.
Thanks
Mohan M

Hi,
Please check the below links...
Query for Opening And Closing Stock
Inventory Opening and Closing Stock
open stock and closing stock
Kuber

Open and closed invoices

hi experts,
I have to capture the parked, open and closed invoices in a report in reference to vendor...
I got the parked invoice condition from the table BSTAT either v or w.
But i am not getting the idea how to capture the open and closed invoices...
Some one suggested me to use the ITEMSET structure but i donno how to capture those values can anyone suggest me how to do it...?
SIRI

Hi,
you can use the same query...Also check the new code after the select..
SELECT BUKRS BELNR GJAHR BSTAT
FROM BKPF
INTO TABLE T_BKPF
WHERE BUKRS = P_BUKRS
AND BSTAT IN ( ' ' , 'A' ) " ' ' - Normal document, A - Parked doc
AND BLART = P_BLART
AND CPUDT IN SO_CPUDT " Selection screen input.
IF NOT T_BKPF[] IS INITIAL.
SELECT BUKRS BELNR GJAHR BUZEI EBELN AUGBL AUGBT
INTO TABLE T_BSEG
FOR ALL ENTRIES IN T_BKPF
WHERE BUKRS = T_BKPF-BUKRS
AND BELNR = T_BKPF-BELNR
AND GJAHR = T_BKPF-GJAHR
AND EBELN IN SO_EBELN " selection-screen input
ENDIF.
LOOP AT T_BKPF.
Parked
IF T_BKPF-BSTAT = 'A'.
 WRITE: / T_BKPF-BELNR , ' - Parked'.
process the next record.
 CONTINUE.
ENDIF.
Check for Open / Closed.
LOOP AT T_BSEG WHERE BELNR = T_BKPF-BELNR
 AND BUKRS = T_BKPF-BUKRS
 AND GJAHR = T_BKPF-GJAHR
 AND AUGBL <> ' '.
 EXIT.
ENDLOOP.
If the return code is 0 then the document is cleared..
IF sy-subrc = 0.
 WRITE: / T_BKPF-BELNR , ' - Closed'.
Else the document is not cleared.
ELSE.
 WRITE: / T_BKPF-BELNR , ' - Open'.
ENDIF.
ENDLOOP.
Thanks,
Naren

Open and closing balances std report

Dear All,
please suggest me open and closing balances std report and can i suggest my user below t.code for viewing open and closing balnces for India scenarion T.code:J3RFLVMOBVED
Regards
Gopal.S

hi
kindly chk MB5B it will fullfill your requirement
regards
praveen.k

Service Requests Open 5 days?/Service Requests Open and Closed Today

Help!
How would I determine service requests open greater then 5 days, I use the # of Open SR's but cannot seem to get a date to work.
Also what is the best way to count the SR's open and closed on the same day?
Thanks in advance.

You need to include a TIMESTAMPDIFF function in your filter... something to the effect of
TIMESTAMPDIFF(SQL_TSI_DAY,"Service Request"."Create Date",CURRENT_DATE) > 5
Double check the column reference.
Mike L

7344 servo motion switching between open and closed loop operation

I have a custom end-of-line test system presently using a 4-axis 7344 servo controller to perform various functional tests on small, brushed DC motors. The system is programmed in C/C++ and uses flex motion functions to control the motor during testing. Motors are coupled to external encoder feedback and third party PWM drives running in closed-loop torque mode from an analog command signal. The system uses all four motion axis channels on the 7344 board to independently and asynchronously test up to four production motors at a time.
In closed-loop mode, the system runs without issue, satisfying the battery of testing protocols executed by this system. I now have a request to add additional test functionality to the system. This testing must be run in open loop mode. Specifically, I need to use my +/- 10v analog output command to my torque drive to send different DAC output levels to the connected motor.drive while monitoring response.
I do not believe the flex motion library or 7344 controller includes functions to easily switch between open and closed loop mode without sending a new drive configuration. I am also under the impression that I cannot reconfigure one (or more) servo controller axis channels without disabling the entire drive. As my system runs each axis channel in an asynchronous manner, any requirement to shutdown all drives each time I change modes is an unworkable solution.
I am open to all ideas that will allow asynchronous operation of my 4 motor testing stations. If the only solution is to add a second 7344 controller and mechanical relays to switch the drive and motor wiring between two separately configured servo channels, so be it. I just want to explore any available avenue before I place a price tag on this new system requirement.
Bob

Jochen,
Thank you for the quick response. The 7344 board does an excellent job running my manufacturing motor assemblies through a custom end-of-line tester in closed loop mode. A portion of the performance history and test result couples the motor through a mechanical load and external shaft. The shaft is in contact with a linear encoder that closes my servo loop.
My new manufacturing requirement is to also sample/document how the small DC motor behaves in open loop operation. Your solution is exactly what I need to perform the additional functional tests on the product I am manufacturing. I see no reason why this cannot work. I was originally concerned that I would need to reinitialize the 7344 board after changing axis configuration. Initialization is a global event and impacts all four channels on the 7344 board.
Using flex_config_axis() to change axis configuration on a single channel without disturbing other potentially running axis channels will solve my concern. It will be several weeks before I can return to the manufacturing facility where the 7344-based testing machine is located. I will update this thread once I verify a successful result.
Bob

Font usage in CS6 Premiere , Open and Closed quotes??

Hello
I am trying to use open and closed quotes in CS6 Premiere, without any success.
Using a Mac 10.8.5.
When I try the alt shft [ and the shift [ it only uses one side of the quote.
Any suggestions?
Is this a software, settings or OS issue?
Thank you
I am working on deadline....
Brian

One side? I'm confused. You mean want these?
But you're only seeing this?

COPA reporting with open and closed projects

Dear All,
I am designing a COPA solution for an infrastructure providing company using project systems and posting to/settling out of projects on a monthly basis. Projects run for long periods and continually incurr costs and earn revenue untill they are closed. The requirement is to report by common characteristics (say customer group) and separately for open and closed projects. My issue is how to separate the line items of projects where status changed to closed (having posted with the status REL previously), from the open ones, without entering the projects individually in the selections screen.
Any ideas will be greatly appreciated.
Thanks,
Maddy

Dear Satya,
http://help.sap.com/saphelp_erp2005/helpdata/en/75/ee0bbd55c811d189900000e8322d00/content.htm
An item of a purchase requisition is only regarded as Closed if the requested order quantity has been included in a purchase order.
You can also set an item to Closed manually. This item will then not be taken into account by the materials planning and control system.
You can set the Closed indicator manually at the following points (it can later be cancelled if necessary):
When changing a purchase requisition, on the item detail screen
When creating a purchase order referencing a requisition, on the item detail screen of the PO
You can still create purchase orders by referencing a requisition if this indicator has been set in the requisition concerned.
The indicator can also be set in the case of automatic PO generation from purchase requisitions. On the initial screen of the requisition, you can specify that the requisition is to count as closed as soon as an associated purchase order has been generated, even if the complete quantity requested has not been ordered, for example (Set reqs. to "closed" indicator).
Analyses of Purchase Requisitions:
http://help.sap.com/saphelp_erp2005/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm (visit section under Reporting in Purchasing)
Hope this will help.
Regards,
Naveen.

How to open and closed posting period??

Dear Gurus,
Pls help me, how to open and closed posting period.when and how we used special period.
Regrds
Mahesh

HI,
Tcode is ob52
here we generally provide the following details
a/c type from a/c to a/c from period year to period year from period year to period
+ 1 2007 12 2007 13 2007 16
+ implies it applicable to all account types
generally we can have maximum 4 special periods and total no of periods(normal+special) should not exceed 16
generally we use special periods for year end adjustments like tax adjustments
if it is useful assign me points

Open and Closed Time Outside of the 15 Minute Options

I have a 13 agent Call Center with one CSQ with Skills based routing.
The Call Center closes at 8 pm on Weekdays and 12 pm on Saturday EST. The time of day function only allows me to choose 15 min increments for open and closed. So the Call Center either closes at 8 pm or 7:45 pm. I need to prevent calls from being queued after 7:58 pm on Weekdays and 11:58 am on Saturday. I don’t know how to get around this 15 min restriction. A friend of mine told me that some kind of Java query can be entered into a Boolean variable and then use If / Then statements to check the time and route the call to closed at 7:58 pm and 11:58 am. Any help will be appreciated.

Most commonly used backup methods

Open and closed hand cursors

I have a drag image application and I wanted to use the open and closed hand cursors to move the image about. It seems there is no easy way of accessing these in Java. After searching for cursor names etc.. I decided to hard code the cursors from the .gif image. Also I didn't want the .GIFs as files as this adds to loading problems so I ended up using arrays of pixels that took a little while to enter.
I'm giving you the code if you ever need to use it as I typed it in and wouldn't want anyone else to have to do the same.
int curWidth=32;
 int curHeight=32;
 int curCol;
 Image img;
 int x,y;
 int closed_black[] = { 6,5,7,5,9,5,10,5,12,5,13,5,5,6,8,6,11,6,14,6,
 15,6,5,7,14,7,16,7,6,8,16,8,5,9,6,9,16,9,4,10,
 16,10,4,11,16,11,4,12,15,12,5,13,15,13,6,14,14,14,
 7,15,14,15,7,16,14,16,0};
 int closed_white[] = { 6,4,7,4,9,4,10,4,12,4,13,4,5,5,8,5,11,5,14,5,15,5,
 4,6,6,6,7,6,9,6,10,6,12,6,13,6,16,6,4,7,15,7,17,7,
 5,8,17,8,4,9,17,9,3,10,5,10,15,10,17,10,3,11,17,11,
 3,12,16,12,4,13,16,13,5,14,15,14,6,15,15,15,6,16,
 15,16,7,17,14,17,0};
 int closed_whiteruns[] = {6,13,7,15,7,15,5,15,5,15,5,14,6,14,7,13,8,13,8,13,0};
 int open_black[] = { 10,3,11,3,6,4,7,4,9,4,12,4,13,4,14,4,5,5,8,5,9,5,12,5,
 15,5,5,6,8,6,9,6,12,6,15,6,17,6,6,7,9,7,12,7,15,7,16,7,18,7,
 6,8,9,8,12,8,15,8,18,8,4,9,5,9,7,9,15,9,18,9,3,10,6,10,7,10,
 18,10,3,11,7,11,17,11,4,12,17,12,5,13,17,13,5,14,16,14,6,15,
 16,15,7,16,15,16,8,17,15,17,8,18,15,18,0};
 int open_white[] = {10,2,11,2,6,3,7,3,9,3,12,3,13,3,5,4,8,4,10,4,11,4,15,4,
 4,5,6,5,7,5,10,5,11,5,13,5,14,5,16,5,17,5,4,6,6,6,7,6,10,6,
 11,6,13,6,14,6,16,6,18,6,5,7,7,7,8,7,10,7,11,7,13,7,14,7,17,7,
 19,7,4,8,5,8,7,8,8,8,10,8,11,8,13,8,14,8,16,8,17,7,19,8,3,9,6,9,
 16,9,17,9,19,9,2,10,4,10,5,10,19,10,2,11,18,11,3,12,18,12,4,13,
 18,13,4,14,17,14,5,15,17,15,6,16,16,16,7,17,18,17,7,18,16,18,
 8,19,15,19,0};
 int open_whiteruns[] = {9,14,8,17,4,16,5,16,6,16,6,15,7,15,8,14,9,14,9,14,0};
 int pix[] = new int[curWidth*curHeight];
 for(y=0; y<=curHeight; y++) for(x=0; x<=curWidth; x++) pix[y+x]=0; // all points transparent
 // black pixels
 curCol=Color.black.getRGB();
 int n=0;
 while(closed_black[n]!=0)
 pix[closed_black[n++]+closed_black[n++]*curWidth]=curCol;
 // white pixels
 curCol=Color.white.getRGB();
 n=0;
 while(closed_white[n]!=0)
 pix[closed_white[n++]+closed_white[n++]*curWidth]=curCol;
 // white pixel runs
 n=0;
 y=7;
 while(closed_whiteruns[n]!=0) {
 for(x=closed_whiteruns[n++];x<closed_whiteruns[n];x++)
 pix[x+y*curWidth]=curCol;
 n++; y++;
 img = createImage(new MemoryImageSource(curWidth,curHeight,pix,0,curWidth));
 closedhandCursor = Toolkit.getDefaultToolkit().createCustomCursor(img,new Point(5,5),"closedhand");
 for(y=0; y<=curHeight; y++) for(x=0; x<=curWidth; x++) pix[y+x]=0; // all points transparent
 // black pixels
 curCol=Color.black.getRGB();
 n=0;
 while(open_black[n]!=0)
 pix[open_black[n++]+open_black[n++]*curWidth]=curCol;
 // white pixels
 curCol=Color.white.getRGB();
 n=0;
 while(open_white[n]!=0)
 pix[open_white[n++]+open_white[n++]*curWidth]=curCol;
 // white pixel runs
 n=0;
 y=9;
 while(open_whiteruns[n]!=0) {
 for(x=open_whiteruns[n++];x<open_whiteruns[n];x++)
 pix[x+y*curWidth]=curCol;
 n++; y++;
 img = createImage(new MemoryImageSource(curWidth,curHeight,pix,0,curWidth));
 openhandCursor = Toolkit.getDefaultToolkit().createCustomCursor(img,new Point(5,5),"openhand");
 setCursor(openhandCursor);you need to define openhandCursor and closedhandCursor with your other cursor definitions (I made them default to start with) and then just use setcursor as normal. There must be an easier way to do this!
p.s. thanks to Martin Zvarik for the original code here: http://www.jguru.com/faq/view.jsp?EID=9958

Hi,
you can use the same query...Also check the new code after the select..
SELECT BUKRS BELNR GJAHR BSTAT
FROM BKPF
INTO TABLE T_BKPF
WHERE BUKRS = P_BUKRS
AND BSTAT IN ( ' ' , 'A' ) " ' ' - Normal document, A - Parked doc
AND BLART = P_BLART
AND CPUDT IN SO_CPUDT " Selection screen input.
IF NOT T_BKPF[] IS INITIAL.
SELECT BUKRS BELNR GJAHR BUZEI EBELN AUGBL AUGBT
INTO TABLE T_BSEG
FOR ALL ENTRIES IN T_BKPF
WHERE BUKRS = T_BKPF-BUKRS
AND BELNR = T_BKPF-BELNR
AND GJAHR = T_BKPF-GJAHR
AND EBELN IN SO_EBELN " selection-screen input
ENDIF.
LOOP AT T_BKPF.
Parked
IF T_BKPF-BSTAT = 'A'.
 WRITE: / T_BKPF-BELNR , ' - Parked'.
process the next record.
 CONTINUE.
ENDIF.
Check for Open / Closed.
LOOP AT T_BSEG WHERE BELNR = T_BKPF-BELNR
 AND BUKRS = T_BKPF-BUKRS
 AND GJAHR = T_BKPF-GJAHR
 AND AUGBL <> ' '.
 EXIT.
ENDLOOP.
If the return code is 0 then the document is cleared..
IF sy-subrc = 0.
 WRITE: / T_BKPF-BELNR , ' - Closed'.
Else the document is not cleared.
ELSE.
 WRITE: / T_BKPF-BELNR , ' - Open'.
ENDIF.
ENDLOOP.
Thanks,
Naren

Reg: Open and Closed Activities in DTR

Similar Messages

Maybe you are looking for