Reg: P0 Notified quantity exceeds quantity ordered 50 EA

Dear gurus,
My scenario is intially a PO was made for 50000 with price Rs. 2/-.for this they have done Goods reciept of 25000.
Now the Material value has changed from Rs2/- to Rs3/- for the rest of 25000 quantity for which Goods reciept is yet to be done.
so for this i am going and changing PO as two line items 25000 each and giving respective price.
In our process PO->Inbound Delivery->Goods reciept is followed.so when i am doing the above change in the PO i am getting the error as Error : Notified quantity exceeds quantity ordered 50 EA
                         Message no 0161.
Please guide me.
With regards,
Mallik

HI,
You have an order confirmation (or advanced shipping notification , or inbound delivery) in your PO item coonfirmations tab that has a quantity that is 50 smaller than your goods receipt quantity.
Change the confirmed quantity in the PO. then you can do you GR without error
Regards
KK

Similar Messages

  • DTW : How to Create goods receipt with quantity exceeding purchase order ?

    Hello DTW Experts,
    is there any way to deliver or receive an quantity exceeding the quantiy of the purchase order using DTW, or the only way is to create additional order (create a goods receipt is based on a purchase order).
    When i try the system gives me these 2 different messages :
    1 - One of the base documents has already been closed  PDN1.BaseEntry[line: 1]Erreur définie par l'application ou par ...
    2 - One of the base documents has already been closed Erreur définie par l'application ou par l'objetoPurchaseDeliveryNotes
    Thanks,
    Hafid

    The best way is to draw the purchse order through then add an additional line to the Goods Receipt for the additional quantity. This will close the PO properly, but record the additional quantity

  • Goods issue quantity exceeds the ordered quantity

    Hi Gurus,
                    I created a sales order with single line item for 100 MT. Subsequently i created outbound delivery against the order. Now the 100 MT quantity gets copied in the delivery. now i created an additional line item in the same delivery for 10 MT against the same material . After this i did the PGI. To my surprise system allowed to do the PGI for this additional item that i had added. Now in this case the goods issue quantity exceeds the Sales order quantity. How can i restrict such functionality.
    My requirement is that the goods issue quantity should never exceed the ordered quantity in any case. Moreover the line items should be copied directly from sales order and there should not be any scope of adding any additional line item during delivery. The outbound delivery document should be copied from sales order and no manual alterations should take place during delivery or PGI . How can i achieve the same . Please help.
    Thanks in advance.

    Also for your delivery document tpye,under order reference,keep item requirement as '201' so that system will not allow any new entries in the delivery.
    Phani Prasad.
    P:S: Please check the forum before you post your questions as this query was answered a number of times earlier.
    Edited by: phani.prasad on Mar 6, 2012 11:29 AM

  • Error ' Quantity exceeds quantity in PO' in service entry sheet creation.

    Hi,
    I am getting error "Quantity entered 7,000 exceeds quantity 5,000 in purchase order' ,  Message no. SE363" while creating service entry sheet
    PO Quantity - 1 AU
    Service  quantity - 5 HR
    in service entry sheet creation i am giving 6HR instead of what is planned in PO
    Not sure what driving this error, please help
    Thanks

    Hi
    Could you please check if Message SE 363 is set as an E (Error) in the IMG transaction OME0?. If it is set to an error you will not be  able to accept service overdeliveries even if you have the unlimited indicator set.                                                                               
    Regards,
    Mauro

  • Purchase Order quantity must not Exceed Sales Order quantity

    Dear Experts
    My requirement is when i am creating PO in me21n and taking Document type as Domestic PO and giving account assignmnet as "C" Sales Order, must have to enter Material and quantity and must have to Give Sales Order number and item no in account assignmnet tab , the quantity i am entering in PO must not exceed my Sales Order quantity that is my requirement.
    Regards
    Abi

    Hi,
    You do not create a PO with reference to sales order. In PO you enter sales order number for reference. A purchase requsition can be created directly from Sales order or through MRP depending on the system settings. Then this PR can be converted to PO. here you can restrict the quantity. As in order to change the quantity in PR also you will have to change the quantity in sales order.
    Regards
    Raj

  • Good receipt exceed purchase order quantity

    Hello all, I am trying to do a good receipt that exceed purchase order quantity but I have an error message that I can´t do it.
    I configure tolerance limits B1, B2 and VP but it doesn´t work.
    I only can do a good receipt that exceed purchase order if I put tolerance limits in the PO Delivery tab
    Is there another way?
    Thanks in advance
    Rosa Rodríguez

    Hi Rosa,
    You can see the SAP Note 24312 - Inventory management - system message M7022 - Release Indep.
    As stated in it:
    "During the goods receipt with reference to the purchase order or the production order, overdeliveries are only allowed if this was determined in the purchase order or order (indicator "Unlimited" or definition of the "overdelivery tolerance"). If this is exceeded, the system will always display an error message.
    The corresponding system message was hard-coded as error message in the program. In these cases, the Customizing settings have no effect."
    Also see the SAP Library:
    http://help.sap.com/
    SAP ERP Central Component
    -> Logistics
       -> Materials Management (MM)
          -> Inventory Management (MM-IM)
             -> Inventory Management and Physical Inventory (MM-IM)
                -> Goods Receipt
                   -> Goods Receipts for Purchase Orders
                      -> Underdeliveries, Overdeliveries, and Final
                         Deliveries
    "Overdeliveries:
    In the standard, overdeliveries are not allowed. In the event of an overdelivery, the system issues an ERROR message.
    If overdeliveries are to be allowed, you can specify the following data in the purchase order:
    .- Unlimited indicator:
    If this indicator is set, overdeliveries of any size are allowed. The system does not issue any message.
    .- Overdelivery tolerance:
    You can enter a percentage overdelivery tolerance in the purchase order.
    If a quantity of goods received is larger than the order quantity plus the overdelivery tolerance, it is not accepted by the SAP system."
    So you can only overdeliver the quantity ordered by setting the "unlimited" (EKPO-UEBTK) indicator or by defining Overdelivery tolerances at the Purchase order item level.
    It is not allowed either to receive more than the quantity ordered plus the overdelivery tolerance.
    The system forbids overdeliveries by hardcoding the message as error in the system.
    As already stated by the note 24312 the customizing settings do not have any effect.
    I hope this helps you.
    Best regards,
    Esther.

  • Notified quantity exceeded by 10 KG

    Dear friends,
    I am facing the following error while taking GR for subcontracting P.O.
    Error is : Notified quantity exceeded by 10 KG
    Message no. M7248
    Please do the needful...
    With kind regards
    jakku

    Actually my issue is different from what U understood.
    In our process we are issuing the rm to external vendor for processing and we are getting rawmaterial intern which has processed by vendor. To meet this requirement we are creating subcontrcting PO for incoming mateial and we are maintaining outgoing material as component.
    After creating the PO first we are doing movment type 541 issue of outgoing material to vendor, then we are taking gr for incoming material after providing outgoing material to vendor.
    when ever we will do gr for incoming material, movement type 101 and 543 will takes place automatically.
    While doing the gr we are getting the following error.
    Notified quantity exceeded by 10 KG

  • PU Ordered quantity exceeded by 123,456

    Hi,
    I have selected the default value for 'Propose all items' in the MIGO settings option, to enable early GR against a Scheduling Agreement.
    Now, When i try to do a GR with MIGO i am getting the following error message: PU Ordered quantity exceeded by 123,456
    I beleive we can change this 'Error Message' into a 'Warning Message'. Please help with the configurations to do this.
    Please help. This is very urgent.
    Thanks,
    Manju

    hi,
    I have implemented whatz mentioned in OSS Note # 741385.
    Use transaction CMOD create a new project.
    Enter MEVME001 as enhancement, select EXIT_SAPLEINR_001 function module
    under Components, and enter the following source code in INCLUDEs ZXM06U28:
    data: ls_ekpo like ekpo.
    move pot to ls_ekpo.
    f4 = ls_ekpo-menge + ls_ekpo-menge * ls_ekpo-uebto / 100.
    Activate the function and exit the project.
    Note that in transaction MIGO the 'propose all items' field should be set
    to the default values.
    But still when I check the document i am getting the same error PU Ordered quantity exceeded by 123,456
    Please advise. This is very very urgent.
    Thanks,
    Manju
    Edited by: Manju Veena on Mar 26, 2008 6:51 AM

  • ML81N - M7 022 - PU Ordered quantity exceeded by

    I have a PO (NB) with item cat = D
    The Over Del Tol on the Item->Delivery is flagged and the services have unlimited tolerances and unlimted overall service tolerances. The item qty = 1 AU as you expect and the service qty is 100 EA.
    When I process ML81N to accept a service entry sheet  for 1 EA on that service it gives "M7 022 - PU Ordered quantity exceeded by 1 EA"
    Other info:
    - the service was pulled into the service entry sheet via Adopt/Select Services i.e. it´s a planned service
    - no other sev. entry sheets exist
    SAP OSS and forums only mention the need to flag the Item -> Delivery Unltd Over Del Tol flag, which is flagged in my case.
    Any ideas?

    Hi Gurus,
    I cannot 'accept' a Service Entry sheet.
    It just gets to the 'will be accepted' status.
    When I press save, I get more or less the same error.
    The error in my case is: "PU Ordered quantity exceeded by 1 AU : 1808".
    I am wondering why this happens because when we tested it in a dev box, there were no problems accepting the entry sheet.
    I am not very familiar with SAP MM and your help will be welcomed.
    Info:
    • This occurs when we test it in the test box
    • The Delivery > Overdelivery tolerance limit flag is enabled.
    • The Services > Overfulfillment tolerance flag is disabled.
    • Changing the qty in the SES does not help.
    Thanks.
    ~ ric

  • PU Ordered quantity exceeded by  QTY8 EA

    Hi Experts,
    we have a process. we created Purchase order ( Intercompany). The Po will create SO ,Delivery, GI through batch jon. Then we go to me23n. we have corresponding Inbound delivery for Delivery doc.But when i create GR,system is showing error message (PU Ordered quantity exceeded by 8 EA ). ven though though inbound delivery happened and stock available.
    Thanks & regards,
    Vamsi

    Hi,
    SO will divide  qty 8 each due to availability check. first line item was confirmed for  qty 8 . and the second lienitem confirmes after few hrs with qty 8 due to APO availabity check. it was common in our process.. so delivery doc created for qty 8 each. respectively inbound delivery is 8 for each delivery doc.after inbound , i am unable to do GR either MB01 nor invound delivery change mode and click goods receipt.both the ways, i am unable to do GR for both the qty's
    Hope this Helps.
    Regards,
    Vamsi

  • PU ordered quantity exceeded by...

    While doing MIGO for Schedule agreements the following error occurs :  PU Ordered quantity exceeded by..... can u suggest a possible reasons and solution for the same...
    regards
    Dhinakar

    Hi,
    For example,
    You have done GR for 10 nos against a PO of 25 nos.
    So remaining 15nos only,you can do GR.
    But,if you try to do the GR for 20 nos, the error will appear.
    I think it will clear you.
    Reward if useful.

  • PU Ordered quantity exceeded by 2 EA

    Hi
    If the PO qty is 10 and i want to do a GR for 12 qty. i am getting a "Erro message" as "PU Ordered quantity exceeded by 2 EA"
    So my question is, I want to change this ERROR TO WARNING message.
    Where i can get this.
    Thanks
    Anand

    Hi,
    Since this error is during MIGO or GR, i suggst you to got o the customizing of GR settings.
    Go to MM--- > Inventory Management -
    > Goods Receipt --- > Tolerance Limits.
    Adjust to required value. Then try to create GR. The values will be taken depending on the tolerance limitsOver Tolerance) settings.
    Ex: If Over Delv tolerance =25%.
    PO quantity is 100. You want to do GR for 125nos, The system will accept becacuse it has been customized for 25% more.
    IF 126, it throws error.
    Hope this is helpful.
    any queries, let me know.
    Thanks & Regards,
    Smitha

  • Error message -L3199-Total for assigned quantities exceeds quantity to be removed

    Hi,
    We are facing problem in picking at last HU in WM while creating transfer order for delivery document in PRD. We reproduced same issue in QXS.
    Sales order was created with 40 Drums and also delivery with 40 Drums. Conversion factor mantained in material master is 441 DR = 30000KG, Base unit of measure is KG. While creating TO , we need to insert 5HU(each HU = 8DR) i different line items in TO . Tilll 4th HU is inserted i.e 32 DR(total)  there is no issue. But as soon as we enter 5th HU below error is throwing.
    Error Message - L3199-Total for assigned quantities exceeds quantity to be removed
    In some cases delivery qty is showing more than picked qty (in other deliveries) and hence unable to create or confirm Transfer order.
    Appreciate your comments on above issue /resolution or any OSS note/user exits/BADI exists ?
    Regards,
    Srinivas M

    there is a huge amount of decimal dust
    1 drum has a weight of 68.02721088435374
    calculating the weight of 40 drums (quantity to be removed) in one single calculation rounds different to 5 * 8 drums where you actually have 5 individual calculations with a rounding that is then added to one result (assigned quantity).
    Have a look into this KBA, as it explains different reactions based on the screens that are used.
    However, I think you will not get lucky by this workaround as the you still have inaccurate quantities for the remaining drums
    1926014 - LT03 - Overpicking allowed / not allowed during TO creation in foreground

  • How to Prevent the confirmation of quantity in Sales Order

    Hi All,
      I want to make sure that if the quantity in a line item for certain customers exceeds certain threshold quantity the quantity does not get confirmed and we set up a delivery block on the entire order.
      I know how we can setup the delivery block. Could someone tell me, if we can programmatically ensure that quantity is not confirmed for that particular item. Is there a standard SAP way (function module/BAPI etc) of doing it? Or do I need to find and update the table.

    Hello krishna,
    You need to delete the confirmed schedule line programatically in the user exit. 
    Delete the corresponding entry in the internal table xvbep. You need to do this in a appropriate user exits in the include mv45afzz.
    I guess you can also do this in atp function module user exit.
    Hope this helps you..
    Regards,
    Jiten

  • The sum of the confirmed quantity exceeds the sum of stock items

    Hi,
    I have two sales order. Material is same. Both of them related project stok.
    First sales order's qty=1. I created purchase order and post goods receipt.
    Second sales order's qty=2. I created only purchase order.
    I cannot create delivery for first sales order. System giving message.
    Information message : The sum of the confirmed quantity exceeds the sum
    of stock items
    20000978     10     Only 0 ST of material 7ML18301CF  available
    20000978     10     An item with no delivery quantity is not permitted. Item will be deleted.
    But I have a 1 qty on project stock.
    Please help me.

    hi,
    this is to inform you that,
    please run this report in SE38, SDRQCR21 if you have any inconsistencies in the system.
    it seems there is an issue with MARD-DISKZ  & please correct it.
    but i have a doubt MB51 is material document llist.  why you are checking stock there.
    please confirm.
    regards,
    baljia
    Edited by: balaji timmampalli achari on Nov 17, 2010 9:00 AM

Maybe you are looking for