Reg- Package and Workbench request

hi
While creating Workbench request system is not asking Package, insted of that it is asking transport request. earlier we used to save in Packages. where i ahve to settings?
regards
raejdnra

Hi Rajendra Prasad,
It will ask for the package name only for the first name. If you are trying to change it, it will only ask for a transport request and not a package name.
Regards
Aneesh.

Similar Messages

Difference between customizing request and workbench request?

Hi ,
What is the difference between customizing request and workbench request?
please reply.........

HI,
Workbench Requests
When you change a Repository object of the ABAP Workbench, a query window appears in which you need to specify a Workbench request. You can only save the changes if you have assigned the object to a change request.
Workbench requests and the tasks assigned to them are normally used to record changes to Repository objects and Customizing for all clients. However, you can also include client-specific Customizing.
Whether the changes to Repository objects are transported depends on whether a transport route is defined from the current SAP System for the package of these objects. From the system settings, the system automatically determines whether the change requests are transportable and to which target system they should be transported.
Customizing requests
Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.
pl reward if it helps.
Thanks
Sadhu Kishore

Diff between customizing request and workbench request

hai everybody...
i want to know the difference between customizing and workbench request.
and tell me what is customizing request?
and also what is workbench request?
thanks ...
velu.......

Hi,
Workbench Requests
When you change a Repository object of the ABAP Workbench, a query window appears in which you need to specify a Workbench request. You can only save the changes if you have assigned the object to a change request.
Workbench requests and the tasks assigned to them are normally used to record changes to Repository objects and Customizing for all clients. However, you can also include client-specific Customizing.
Whether the changes to Repository objects are transported depends on whether a transport route is defined from the current SAP System for the package of these objects. From the system settings, the system automatically determines whether the change requests are transportable and to which target system they should be transported.
Customizing requests
Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.
Hope this info helps.
Regards,
Kumar.

Diff between cusztmizing and workbench request

could u please let me know what is diff between workbench and custmizing req ?
Regards

Hello,
customizing req vs workbench request
Check this info.
Workbench Requests
When you change a Repository object of the ABAP Workbench, a query window appears in which you need to specify a Workbench request. You can only save the changes if you have assigned the object to a change request.
Workbench requests and the tasks assigned to them are normally used to record changes to Repository objects and Customizing for all clients. However, you can also include client-specific Customizing.
Whether the changes to Repository objects are transported depends on whether a transport route is defined from the current SAP System for the package of these objects. From the system settings, the system automatically determines whether the change requests are transportable and to which target system they should be transported.
Customizing requests
Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.
Hope this resolves your query.
Reward all the helpful answers.
Regards,
Jorge Diogo

Customizing request and Workbench request

Can some one clarify me the difference elaborately
Thanks
Krishna

Hi Krishna
Changes to cross-client Customizing objects and to Repository objects are recorded in Workbench requests
In workbench request .... it can be programs(repository objects) and cross client data (ie not specific to one client).
Changes to client-specific Customizing objects are recorded in Customizing requests.
Customer customized data designed for a specific client is transported to another client using customizing request. Most of the cases these requests are something like changing values in tables (that too client specific).
Hope it helps
regards
Srinivas

Attaching Package and transport request for existing SAPScript

Hi!
I require to attach development class and transport request in one existing SAPScript. Can anyone please suggest how to do?
Thanks and regards,
Atanu

Hi Atanu,
   You can try following two methods -
   1. Display SAPSCRIPT and use option goto -> Object directory entry and change the "Package".
   2. If that is not allowed, try using Txn. SE03 and try changing Object directory entry from there.
If you assign a package which is transportable, system will prompt you for a transportable request.
Cheers,
Sanjeev

Difference between workbench request and customizing request in transport

Hi Experts,
I am new to SAP BI7 work. i am having basic doubt in Transort request creations
ususally we create the requests to transport the objects from Development system to further systems.
can anyone please clarify me, what is the main defference between the Workbench request and Customizing request.
Thanks and Regards
Mrudula

Hi ,
The Transport Organiser maintains Change Requests.These requests record the changes made to the repository and customizing objects.Based on that objects changed they are
1)WorkBench Request & 2) Customizing Request.
Workbench Requests are those that involve changes to cross-client Customising and Repository Objects. The objects are independent of the client.Hence the requests are used for transferring and transporting changed Repository objects and changed system settings from cross-client tables.
Customizing Requests involve changes recorded to client-specific Customizing objects .These client specific requests are used for copying and transporting changed system settings from client-specific tables.
Refer this links http://www.allinterview.com/showanswers/57910.html
customising and workbench request
Difference between Customizing request and Workbench request
and many more threads available on this.
Regards,
Rahul.

About package name and transport request number

Hello Gurus,
I know when doing some changes in the sap bw system, and performing activation subsequently , you are prompted to save the changes into some package and transport request. my question is:
in the real project, where does those package name and transport request number come from? make up by myself or provided by project management, or someone else? if doing by youself, how to make up package name and transport request number ?
Many thanks.

package is like a folder in windows.. u create package for a project and than collect all the relevant transports in it.
to create package u use SE80.. Transport req number are configured by basis team.. its usually source system ID and running serial number...
package name can be decided by tech architect or by ur team manager..

Workbench request & Customizing Request

Hi ABAP Experts,
What is Work bench request and customizing request ? what is the differences ?
Thanks and Regards,
Vijaya

HI,
Customizing Request:
Changes to Customizing settings are recorded in Customizing requests.
When you release the requests, the current status of the recorded settings is exported, and can then be imported into the consolidation system and, if necessary, into subsequent delivery systems.
The client settings determine whether
- changes to the Customizing settings are possible
- the changes are recorded
When you create Customizing requests, the transport target is automatically assigned the standard transport layer by the SAP System.
Workbench Request:
Workbench requests record changes made to ABAP Workbench objects.
There are local and transportable Workbench requests. (Local Workbench requests have the target system <space>.)
The package of the object and the transport route settings in the Transport Management System determine whether changes are recorded in a local or a transportable Workbench request.
Changes to Customizing settings are recorded in Customizing requests.
Workbench requests record changes made to ABAP Workbench objects.
It shows the 2LIS_11_VAITM is already in a particular request......you can do changes and in it if you delete the request or it might be locked in the request with someone's other ids....you can verify with them.....
You can see good details on this thread:
Re: customising and workbench request
Hope this helps...
PLS:AWARD POINTS IF USEFUL
SRI
Hope this helps

Customization Request & Workbench Request

What is the difference between Customiztion Request and Workbench Request?
regards
Satish

Work bench request : Workbench requests record changes made to ABAP Workbench objects (TCODE: 3KEI, GGB0, ABAP program creation/changes, LSMW). This should be created manually to transport the required changes
Customization request : Changes to Customizing settings are recorded in Customizing requests.( all changes / new settings relating to configuration part). This will be created as a reaction by the system to save the changes.
VVR

What is the workbench request and customizing request.

can anybody explain what is workbench request and what is customizing request.

Workbench Requests
When you change a Repository object of the ABAP Workbench, a query window appears in which you need to specify a Workbench request. You can only save the changes if you have assigned the object to a change request.
Workbench requests and the tasks assigned to them are normally used to record changes to Repository objects and Customizing for all clients. However, you can also include client-specific Customizing.
Whether the changes to Repository objects are transported depends on whether a transport route is defined from the current SAP System for the package of these objects. From the system settings, the system automatically determines whether the change requests are transportable and to which target system they should be transported.
Customizing requests
Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.

Difference between workbench and customizing request?

Hello
Can somebody tell me the differance between workbench and customizing requests? Should they be transported in differant ways?
Thanks

Hello ,
Changes to Customizing settings are recorded in Customizing requests.When you release the requests, the current status of the recorded settings is exported, and can then be imported into the consolidation system and, if necessary, into subsequent delivery systems.
The client settings determine whetherchanges to the Customizing settings are possible the changes are recorded
When you create Customizing requests, the transport target is automatically assigned the standard transport layer by the R/3 System.
Work Bench Requests
Workbench requests record changes made to ABAP Workbench objects.There are local and transportable Workbench requests. (Local Workbench requests have the target system <space>.)The package of the object and the transport route settings in the Transport Management System determine whether changes are recorded in a local or a transportable Workbench request
Message was edited by:
Karthik Egamparam Venkataraman

What is the difference between workbench request and customizing request

hi gurus
can anyone suggest me
what is the difference between
workbench request and
customizing request
abaper ll work on which request
thank you
regards
kals.

A quick search in the forum would have taken you to this answer
Workbench Requests
When you change a Repository object of the ABAP Workbench, a query window appears in which you need to specify a Workbench request. You can only save the changes if you have assigned the object to a change request.
Workbench requests and the tasks assigned to them are normally used to record changes to Repository objects and Customizing for all clients. However, you can also include client-specific Customizing.
Whether the changes to Repository objects are transported depends on whether a transport route is defined from the current SAP System for the package of these objects. From the system settings, the system automatically determines whether the change requests are transportable and to which target system they should be transported.
Customizing requests
Customizing requests record client-specific Customizing settings made in a single client (the source client of the request).
Automatic recording of configuration activities in the Customizing work for a client can be activated or deactivated for each client with Client Control. If automatic recording is active, a query window appears when you change Customizing settings, asking you to specify a Customizing request.
Whether Customizing requests are transported or not, does not depend on the objects entered, as is the case with Workbench change requests. The Customizing requests in an SAP System (or in a client if you use Extended Transport Control) are either all transportable or all local, depending on the system setting. The system uses the standard transport layer to determine automatically whether the change requests are transportable and to which target system they should be transported. However, you can change this manually.

Creation of new package and request number.

Hi frndz,
Hope everyone are doing fine. Coming to my query, its quite simple for you guys.
But me being new to BW, I would like to know how to create a new package and request number.
And I have a task to create a new IS and DS also. So do i need to create these new package and request number separately or at the time of creation of IS and DS.
Please give me clear idea.
Thanking you.
regards
Dubbu

Hi Vinay,
I hope you are speaking about Package to collect Objects and collecting them in Transport Requests.
Usually you use the same packages for all the objects. According to requirement if you want to create the Package you can goto SE80--> There you can create a New Package. Give Transport layer as SAP. and Activate it. Then you collect the package in a Transport Request. You can create the request by the create button on the screen when it ask for Transport Request.
While creating the Infosource or other objects you mention the package which you have created while saving and you can use the existing TR or new TR for collecting them.
You can use RSA1---> Transport Connection to collect the objects easily to TR's
Regards
Karthik

How can I get the No. of package and requesting system name in user exit?

Dear all,
Is there anybody knowing how to obtain the extracting package number and requesting system name in the user exit "EXIT_SAPLRSAP_002" ? here is detail on my questions as below:
For package number. If extracting 100,000 records of 0MATERIAL_TEXT , and the package size is 20,000, then there are 10 packages, when executing the user exit, how can I know which package I am extracting on?
For requesting name, when executing the user exit, how can I know the logical system name from which the extraction request is sent?
Thanks.
best regards
Patrick

Hi Mansi,
Thanks for your quick response.
The background of this requirement is, in the datasource 0material_Plant_Att, we added two fields in the extraction structure, one is variable price, another is previous year's variable price, which need to be obtained by searching data KEKO & CKIS in the user exit, these tables have the huge data volume, in each data package, the user exit needs to be executed once, so the heavy searching needs to be done once, consequently, the total running time of this request including several data packages is very long. In order to improve the performance, we design the following logic:
1. Create the temporary tables YCKIS & YKEKO in R/3.
2. Run BW request in BIW.
3. In R/3, If this is first data package of this request, delete all data in YCKIS & YKEKO, then search the data from CKIS & KEKO ( Average 20 million records), then insert these data into YCKIS & YKEKO ( Average 0.2 million records).
4. In R/3, if this is not first data package of this request, then search the data directly from YCKIS & YKEKO.
You can see in the above, in the step 4, the data searching performance can be improved significantly due to reading data from temporary table, this is why I need to know the No. of data package. In addition, apparently, it can not be done in BIW side since the performance issue is in the user exit rather than in BIW. Also it is very difficult to setup one counter to deliver this since we do not know when to reset the counter. For example,
- Assuming there are 3 data packages.
- 1st day, we schedule one request from BIW, in R/3,
   -> At 1st package, counter = 0+1=1
   -> At 2nd package, counter =1+1= 2.
   -> At 3rd package, counter = 2+1= 3, then reset counter = 0 for next request.
Question 1: How can we know the 3rd package is last one?
Question 2: If during the 2nd package, the extraction job is cancelled exceptionally, the counter value is 2 not 0, then for the next request, the data searching is not correct, right.
Hope the above is clear, and apology this email is too long.
Thanks.
best regards
Patrick

Reg- Package and Workbench request

Similar Messages

Maybe you are looking for