Reg.payment terms

Hi
[1].    Customer credit period =30 days
Payment should be made by 2 installments
1st installment at the time of delivery i.e 30% (10 days from posting period)
2nd installment after 20 days i.e  remaining amount.(70%)
i entered values in installment window under Admin----setup--Business partner----payment terms
   installment =1
  credit method =First installment
  update tax proportionately
  month =0
days = 10
percentage=30%
when am trying to add this ,a message showing
the installment rate must be 100%  (message 3540-3)
and how to create 2nd installment
how do i configure the above scenario.
regards
raj
Edited by: raj kumar on Apr 6, 2009 12:32 PM
Edited by: raj kumar on Apr 6, 2009 1:12 PM

Hi
Thank u
i understood second option (apply tax proportionately)
  but in first option(apply tax in first installment) when i included invoice tax amount to first installment,
For eg
total invoice amount =7904
tax amount= 304
1st installment=30%
2nd installment =70%
when i use second option i.e (apply tax proportionately)
30%   =2371.20
70%   =5532.80  this is ok but
in first case (apply tax in first installment) should be
30% = 2371.20  +304 (tax amt)=2675.20  but
          getting 2584 (how it calculated)

Similar Messages

  • Reg:FB02 - payment terms field shouldbe disable

    Dear all,
    When i am doing the transaction by using FB02 tcode for open items once i am maintaining  the payment terms for that document number , after that no one cant able to change that document number payment terms field should be disable mode.
    But  i cant get this feature for open items. But i can get this feature for cleared items. Once that document get cleared , automatically the payment terms field also going to disable mode.
    This same feature should be needed for open items also, once the payment terms field entered, it will leads to go to the non editable mode. 
    Helpful answers will be rewarded.
    Thanks,
    Sankar M

    Hi Enrique,
    I think it is because of Field Status .So Check the Field Status Variant in SPRO.
    Path:Financial Accounting (New)->Accounts Receivable and Accounts Payable->Business Transactions->Outgoing Invoices/Credit Memos->Make and Check Document Settings->Define Field Status Variants
    Check for your Field Status Variant assigned for your company code then the Field Status Group.Hope you can see the Field Payment Term check whether it is Suppressed or not else make it Optional or Required according to your requirement.
    Hope this might help you
    Regards
    Andrew

  • Vendor Invoice verification  payment terms

    Hi Experts,
    PO is having one item with Gross price,freight .
    Freight vendor is different from main vendor.
    Main vendor-PAYMENT TERMS-1% discount- 5 days
    Freight vendor--PAYMENT TERMS- pay immidiatly
    After making GRN and when i tried to post invoice in MIRO
    for freight  vendor,system is not calculating as per payment terms of  freight vendor and showing 1%discount as in main vendor payment terms
    Let me know how system can calculate freight value with out discount .
    I tried simuating invoice with PO reference,Vendor reference also in MIRO.
    Thanks ,
    Rama

    Hi
    Payment terms are defined in the PO at header level and hence the system takes the payment terms of the regular vendor for the freight vendor also.
    Check whether payment terms can be given at item level.
    If not possible then change the payment terms for the freight vendor manually while doing MIRO .
    while doing MIRO select PO reference and also planned delivery costs selection.
    Revert with ur comments..
    Reg
    Raja

  • Payment terms in vendor master record

    Hello,
    How can I make the payment terms mandatory in the vendor master record?
    Thanks,
    Annabelle R.

    Hi,
    Try following :
    SPRO -- Financial Accounting (New)Accounts Receivable and Accounts PayableVendor AccountsMaster DataPreparations for Creating Vendor Master Data--Define Screen Layout per Company Code (Vendors) //Define Screen Layout per Activity (Vendors)
    or alternatively use  tcodes: obd3, ob23 and ob24
    hope this helps
    reg
    dheeraj

  • Transaction variant for Payment terms in VA01

    Hello experts
    I already found lot of forms regarding, by using transaction variant how to control the Payment terms while creating Sales order as well as in tras code VA02(Change sales order).
    I have created T.Var and screen variant and done all other relevant things like activate the standard variants and also tried to assign via user through variant groups. The option invisible and required were working as per Transaction variant but the same not working for Output Only.
    Hence pls suggest whether i had made any mistakes or any other things to be carried out for same.
    Regs,
    S.Ramesh.

    Solved own through user exit,please close this thread.
    Regs
    S.Ramesh

  • Payment term from Ship-to party

    Hi,
    Noramlly, Payment trem flows from Sold to praty to the sales orders. My client wants ship- to party wise payment terms should flow to SO since the Purchase order is recevied from ship-to location, still payment is received from the sold-to party only.
    In this case how to bring the ship-to party's payment terms to SO in std SAP. If it is not possible in std, if i use any userexit to achieve this, what could be the implication on doing so?
    Thanks in advance,
    Reg,
    JJ

    hi,
    you can base on this user exit for caturing ZTERM from SH.
    USEREXIT_MOVE_FIELD_TO_VBKD
    MV45AFZZ.
    hope this clears your issue.
    balajia

  • Delivery block based on payment terms

    Dear Experts,
    I want to set up the delivery block by the system, for the sales order which has the particular payement term 'cash in advance'  until the payment recieved by the accounting..
    How can i achieve this...appreciate if u could share ur ideas...
    Thanks in advance.
    Reg
    JJ

    HI
    This can be achieved at sales order level.
    check if payment terms = "cash in advance"
    VBAk-LIFSK = 01.
    You can write this logic in MV45AFZZ include.
    Use USEREXIT_SAVE_DOCUMENT.
    try and revert

  • Payment Terms configuration

    Dear Friends,
    I have 2 queries -
    1. Can we configured the Payment Terms which will enable while invoicing to create the multiple line item while Invoice Posting ( accounting entry ) say, while doing MIRO / FB60 transaction. And one of those would go to Special GL. e.g. we have to deduct the Retention Money @ 5% from Invoice Amount and we are using one of Special GL for Retention money so can i configure the Payment Term as -
    1. 95%       -
    60 Days
    2. 5%        -
    365 Days
    So here 2 ( 5% ) will be posted as Special GL item while Invoice Entry.
    ( Currently we are transferring those entries to special gl manually using T code - F-02 from Vendor Open items )
    2. We have configured the number of Payment Terms but sometimes negotiated Terms does fall into the category of existing Payment Terms and it is not possible to create the Payment Terms for such requirement. So can we configure one Payment Term which will be editable while Purchase ORder Creation or Invoicing ( like payment term with "OTHERS" would be created and initially it would be configured for 0 Days and those would be edited while making Purchase Order as per requirement.
    Since this is affecting our Ageing Analysis and Payment Due Report as both are based on  Payment Terms in PO.
    If anyone has solution pls suggest the way to do it . will assign full marks if gets solution.
    Thanks in advance.
    PS

    Hi
    I think we can't maintain cash discounts more than two %.
    Goto OBB8, choose account type customer/vendor.
    goto payment terms segment.  1)  3%  days 0  2) 2% days 15.
    3) we can enter %, only days. it means no cash discount.
    Regards,
    Chandra

  • Getting split payment terms in case of customer credit memo(Doc type DG)

    Hi Guys,
    Is there any FM available for getting split payment terms in case of customer credit memo(Document type DG). There will be no invoice/billing doc for this document type and will be created from FB75 transaction. For billing document i am using FM SD_PRINT_TERMS_OF_PAYMENT_SPLI. Please let me know if there is any FM for accounting document also.
    Thanks,
    Vinod.

    Hi,
    Try this bapi
    BAPI_AR_ACC_GETSTATEMENT

  • The payment terms are not getting reflected in PO

    Hi,
    We are in SRM5.0 Extended Classic scenario.
    We have created new payment term in ECC and transferred to SRM using BBP_UPLOAD_PAYMENT_TERMS and after tranferring it to SRM I am able to see the new payment term in table BBP_PAYTERM and BBP_PAYTERM_TEXT in  SRM system.
    But non of the payment terms are not reflecting into PO. We are not getting any errors while processing the PO.
    Could you please suggest what may be the issue here.
    Best Regards,
    Siddappa

    Hello Siddappa,
    I am a little confused here with the scenario.
    I understand that the payment terms are recenly created and replicated. So naturally they would have been updated in the relevant vendor master as well. Now has the vendor master been replicated to SRM from ECC once the payment terms were updated.
    So from what you have mentioned "When we check the BBP_PD, the payment term is reflecting for the POs created after shopping cart approval."
    So does this mean once the SC is approved then the PO is created and then the Terms of Payment are seen in the PO.
    However "If the PO created through describe requirement, the Vendor will not assigned the PO created will go to Held status and buyer will process the order."
    So does this mean since the Vendor is not mentioned the Terms of Payment is not being reflected and will happen only once the same is specified in the PO.
    I have a question on whether after replicating the Payment Terms, has it been seen in any of the PO's created so far or it is always blank.
    Regards
    Pramod

  • How to get vendor payment terms

    Hi all,
    I am creating a report. I need to get vendor payment terms. There are invoices without PO, how can I retrieve the payment terms for those cases.
    Thanks.

    Hi nene
               in case of invoice without PO, The payment term will be selected from the vendor master data (in View : payment terms transaction in XK03).
    Check payment term in  master data is exist or not.
    the data is in the table LFB1 : Field ZTERM
    Regards
    Wiboon

  • Vendor Payment Terms

    Hi All
    Is there a report that can give me the Vendor Payment terms
    Vishnu

    Hi Vishnu,
    go to SE16 , enter table name LFM1. in display parameters select ZTERM
    Regards
    Mangesh.

  • Report  for  payment  terms

    Hi All,
    Is  there  some  table  or report  to see  all  clients 
    which  has the  payment  terms  more  then  15  days?
    Thanks in advance and  best  regards
    Luis

    Hi,
    Go to Se11 or Se16, Enter table BSEG, click on display and select contents (CTRL + SHIFT + F10).
    In the menu section go to settings - format list - choose fields - select field name MANDT - client and ZTERM - Terms of payment ,ZB1T,ZB2T,ZB3T and select copy.
    Again go to settings - select fields for selection, select fields for zterm,ZB1T,ZB2T,ZB3T and Enter and Excute the table.
    You will find the details as per your requirment.
    Please let me know if you need more information.
    Assign points if useful.
    Regards
    Sridhar M

  • AP Payment Terms

    Hello
    Could you please help me with the below mentioned issue
    We have two payment terms
    A15TH_P30TH3% (1st – 15th)
    A30TH_P15TH3% (16th – 31st)
    “Invoices arrived till the 15th, pay on the 30th – invoices arrived till the 30th, pay on the 15th of the following month with 3% discount”
    So invoices from the 1st – 15th we pay on the 30th with discount
    Invoices from the 16th – 31st we pay on the 15th of the following month with discount
    The Supplier payment-term in this case is A15TH_P30TH3%, because each supplier could only have one payment-term.
    For each invoice from 16th-31st of the month we have to change the payment-term to A30TH_P15TH3% to get the discount.
    If we forget to change the payment-term we lose the discount.
    We use this payment-term really often because we only pay on the 15th and 30th or 31st of the month.
    Is it possible to get a solution that we only need one payment-term for this first and second half of the month – payment term.
    Thanks for your help

    Hi,
    You do not need to create two payment terms. What you require here is proxima payment term.
    While defining the payment term in AP, enter "15" in the cut off day. In the "Due" Tab, enter "31" in Day of Month and "0" in months ahead. In the First Discount Tab, enter 3% discount and "31" in Day of Month and "0" in months ahead.
    Now, the system will automatically take due date for all the invoices received till 15th as 31st of the current months and for all the invoices received after 16th as 31st of the next month.
    Attach this Payment Term to the Supplier and use it for all the invoice. No need to manually change it while creating the invoice.
    I hope this functionality is available in the Application Version, you are working on.
    Gajendra

  • AP Payment terms ( discount )  end on week end

    Hi Gurus
    I have a situation where payment terms for an invoice falls on Saturday.So when when we run it on following Monday it disallow the discount ( 2% ). We pay manually with 2% discount.How can we resolve this issue of discount date falling on week end ?
    Kindly give me some solutions please ?
    Thanks
    Satya

    Hi,
    You do not need to create two payment terms. What you require here is proxima payment term.
    While defining the payment term in AP, enter "15" in the cut off day. In the "Due" Tab, enter "31" in Day of Month and "0" in months ahead. In the First Discount Tab, enter 3% discount and "31" in Day of Month and "0" in months ahead.
    Now, the system will automatically take due date for all the invoices received till 15th as 31st of the current months and for all the invoices received after 16th as 31st of the next month.
    Attach this Payment Term to the Supplier and use it for all the invoice. No need to manually change it while creating the invoice.
    I hope this functionality is available in the Application Version, you are working on.
    Gajendra

Maybe you are looking for