Reg: Personell number / Time id and Break up time in COR6N Screen
Dear Friends ,
In OPK1(Process order ) Confirmation profile , In area selection tab , we can see .
Personnel numb er and time ID tabs. and break up time.
Please let me know how to use this fields.
Thanks in advance for your replies!!
Hi Dayanan,
Basically this is HR customization activity. Please follow the below steps
1. SPRO>Enterprise Structure>Human Resources Management>Definition>Human Resources Management> Personnel Areas. Here create the Personnel information.
2. Then do the assignment to company code as
SPRO>Enterprise Structure>Human Resources Management>Assignment>Human Resources Management>Assignment of Personnel Area to Company Code.
3. SPRO>Personnel Management>Personnel Administration>Organizational Data>Organizational Assignment>Define employee attributes. Here you defined employee groups and employee subgroups. In this step, you must assign one of the following statuses to those employee groups and employee subgroups:
Activity status
Employment status
Education and training status
4. Then use transaction code PO10, PO13 and PA40.
All the best
Thanks
Hrishi
Edited by: Hrishi on Feb 13, 2012 4:57 PM
Similar Messages
-
Personel number and gross salary.
Hello experts,
Which table-field are Personel number and gross salary of an employee stored in?
Regards,
SumitHi,
You can ind the master data tables of each infotype maintained.
It starts with PA followed by 4 digit infotype number.
For eg: Action(Infotype 0000) table is PA0000
Personal Data(Infotype 0002) table is PA0002
Basic Pay(Infotype 0008) table is PA0008
Thanks,
Sutapa -
I have Tuch screen ipod and I forget the Secret number , I gessed and try to use different numbers but I could not Open it ( O preate) and then it get locked, and on the screen there is this words ( ipod is locked ,,, contact iTunes ) please help me to solve this problems.
Do as the maual says and restore.
-
How to change number of retries and delay before retrying after software install failure
I deploy a software to client, but the installation is fail, so it will retry. but How to change the number of retries and delay before retrying after software install failure?
I find "Retry Settings" in "Software Distribution Component Properties". But I think it work for Distribution, not the installation. am I right?First, are you referring to packages or applications because the behavior is different.
Also, why do you want it to retry a failure? It failed for a reason so you need to fix the cause of the failure first. If it failed the first, it will likely fail the next time for the same reason. In general, ConfigMgr will only retry on transient type
errors.
Jason | http://blog.configmgrftw.com -
High number of threads and high CPU usage on a single instance
Without any apparent reason, in some moments of day the website reports an increment of the HTTP Queue Length from an average of 10/20 queued requests to 100/200 and more.
In that period of time the Average Response Time increases but the number of the requests on the website don't. Even increasing the instances it doesn't help to resolve the problem (maybe it just reduced it).
It seems that the problem is not related to the traffic on the site. This issue happens either when the traffic is high or low.
The autoscaling works well, we don't have peak of traffic but always a slow increasing of requests and the CPU is always below the 50% (memory too). The issue is resolved by the swap of the site and sometimes it's resolve by itself after a while.
What I discovered when the issue happens, is that there's an instance (just an instance only), that has an high number of threads and CPU usage on the W3WP.exe process and these values are above the mean than the other instances. Eg, instances are around
50/60 threads and 10/20% of CPU, the instance with the problem has 200 threads and 50/60% of CPU. If I kill the W3WP process on that instance the issue is resolved.
I monitored the HTTP requests, I tried the website extension "Diagnostics as service" but I can't discover anything that can help me to understand the problem. Of course, there are many requests that go in timeout but it is a consequences of a
unresponsive instance.
On the web hosting plan there are only two sites: the production site and its staging which is used for update of the production only and it's always sleeping. Plus, no webjobs are running on this site.
What can I do to gather useful information that can help me to understand the reason of this problem?
Thank you!"Does the instance with the high counts receive more traffic than the other instances? Is it possible that the load balancer not
working the way it should be?"
How can I get that information? I can't see metrics for a specific instance
"Does it always happen to the first instance?"
I will check it better, but in the order given by the Processes panel it's the second instance which has the issue. The scaling is at 2 instances for the most part of the time (it's the minimum).
Maybe one time it was the 3th instance but I'm not sure, I'll give it more attention.
" How long do these moment last?"
The time can be 10 to 30 minutes, but I fix it as soon as I see the problem. It's not the down-scaling to resolve it because in these situations the CPU as well is high so the scaling holds or increases the number of instances.
"- How often do these moments occurs?"
It occurs quite often, 2/4 times a week. -
when i send a text in iMessage the person receiving it gets it from my email address... how do i change that. and in message settings the receiving thing has my email and phone number but my phone number is gray and i can't click on it help
Hello Todd:
I had this very same problem when trying to activate iMessage and Facetime on my iPad. When I signed into my account, I actually wasn't even presented with the option of a phone number - notwithstanding the fact that I was contacting others (and being reached by others) by my phone number on my iPhone. Having both the iPad and the iPhone on, I kept trying to turn off and on both iMessage and Facebook in Settings on both my iPad and iPhone, hoping that that they would eventually sync. But this proposed solution by others was unsuccessful for me.
Then, I found out what the problem was: When my iPhone was activated, it automatically registered my phone number for contact purposes. I was using iMessage on my iPhone for quite some time without actually being signed into my Apple ID account. When another device - such as an iPad or iPod - is being used for iMessage or Facebook, you are prompted to sign into your Apple account, using your username and password. These two devices will not register your phone number as an option for contact unless your iPhone is signed into your Apple account as well. In other words: your phone number will not be synced.
Go into your "Settings" on your iPhone and click on "Messages". Scroll down and click on "Send & Receive" (which should be followed by your phone number). On the next page, you will be able to determine whether or not your iPhone is using the Apple ID for messaging purposes. (Note: This information applies for Facetime as well.) If it is using your Apple ID for messaging, than at the top, you will see "Apple ID: <your particular e-mail account>" in Blue text. However, if you are not using your Apple ID for messaging, than you will see the words: "Use your Apple ID for message". Even though below this you will see your phone number checked as the contact source, you will want to click the tab that says, "Use your Apple ID for message". Sign into your account (just as you must sign in for iMessage on your other devices), and just choose your phone number as the "Send & Receive" contact. (The option of the e-mail will be there too, but you don't have to check it. And later on, you can delete it as an option.)
Now that all of your devices are signed in using your Apple ID, the other devices should register your phone number as a choice. It may take a little while, however. What I did was sign out of iMessage on my iPad, and then sign in again. If the option didn't appear, I just went back and signed in again, and kept doing this until the option for the phone number appeared.
Again, this will work for Facetime as well. The solution is to sync your iPhone account with the other devices by using your Apple ID for messaging (and Facetime) purposes.
I hope that this works for you, Todd! ~ Brian -
HT4528 Sound from the built-in speaker badly cracks and breaks
Hi, I need a help on trying to figure out what's wrong with my iPhone 4..
I've had my iPhone for about a year, without any major issue. But recently I noticed that the sound coming from the built-in speaker cracks and breaks to a point it barely makes any proper sound. The weird thing is that this happens only for alarm, text/phone ringtones, and during calls when I try to use the speaker.
At first I suspected it was the hardware issue, but when I play music it works just fine. I tried restoring the phone, but that didn't fix the problem.
I'm thinking about taking it to Apple store or Verizon, but my Apple warranty seems to have expired and I don't know what Verizon can do to help. I should still have the protection plan through Verizon, but it doesn't cover much.f1ght4fun wrote:
Unfortunately, I'm from Cyprus, Europe and diffenrence in time + no Apple Reps here makes it quite hard. I was hoping these threads are also monitored or here might be somebody who knows how to help me.
Either way tnx 4 advice!
This is from the Apple Support Communities Use Agreement:
Apple involvement. Apple does not formally provide technical support on the Site. However, any information that is provided by Apple or Apple employees is offered on an “AS IS” basis without warranties of any kind.
Here is the link: https://discussions.apple.com/static/apple/tutorial/tou.html
Don't get discouraged so easily though, this question hasn't even been up for a full day yet. Give others time to see it -
hi guys,
2 display/video isssues
1) when videos played with full volume, it starks giving jerks and breaks
2) some times when i play videos it gives glitches althougs the videos are clean when played on another computer.
please let me know and help out guys.A Question...
How much Free Disc Space do you have on your Hard Drive...? -
How do I get the best streaming video without the hesitations and breaks?
I have been buying a LIVE broadcast from Abraham-hicks Publication and the speed test says I have enough speed. However during the LIVE broadcast there are many hesitations and breaks that makes me want to go nuts. To pay for a LIVE broadcast and to have it continually break and hesitate, I really want a better experience than the last time I bought a LIVE broadcast...thank you for any suggestions on cleaning up my browser/computer/cookies/etc. cjk
This camera is supported natively in iMovie. You do not need clipwrap unless you have removed the mts files from your camera so they are out of context. iMovie uses the file structure of the camera to determine how to import.
The easiest way to import, if your camera has an SD card, is to use an SD card reader (or an SD card slot on your Mac).
To import, I recommend making a Camera Archive first. This will make an identical copy of what is on the camera. Then, import to iMovie from the Camera Archive.
When you import to iMovie, the AVCHD will be converted to Apple Intermediate Codec for editing. AVCHD is a highly compressed codec, and converting to AIC gives you full I-frames for editing.
When you get ready to send to iDVD, use the SHARE menu to Share in Large size (960x540). You can SHARE/MOVIE and then drag the resulting file into iDVD, or you can SHARE/Media Browser and then use the Media Browser within iDVD to find your movie.
When you make a DVD, you are converting everything to standard definition 640x480. Large size gives iDVD something to chew on without giving yourself the overhead of converting down from 1920x1080 to 640x480.
If you no longer have the files from your camera, then ClipWrap is a good solution. -
Maximum number of characteristics and Key figures used in a Query
Hi Experts,
Any Thought on the maximum number of Characterstics and key figures that can used in a Query. I know it impacts performance query and runs for very long time.
Thanks,
Kumar.Hi Kumar,
Welcome to SDN.
I really did not think about it till now, sharing my thoughts on this -
1. You can use all the characteristics & Key Figure ( & more)in Query what you have in you Cube.
2. Query is suppose to serve a purpose, to deliver you analytics based on some KPI etc & it will have maximum no of char / key figures which human mind could make some sense of.
3. Performance of query actually is divided into three areas -
a. database time
b. OLAP time
c. Front End time
and if you query on not performing well first look at which area is taking maximum time & the optimize that first & there are various ways to optimize each area.
Hope it helps.
VC -
Setting number of rows and columns
How do I set the number of rows and columns of a table, say 2348 rows by 3 columns?
Then how do I quickly select the last row?
Also, if I enter a formula in row 1 column 2, how do I quickly copy that formula down to row 1435, or to the end of the column? Dragging seems slow and awkward.I wish to add a few words to Jerrold responce.
gjf12 wrote:
How do I set the number of rows and columns of a table, say 2348 rows by 3 columns?
Then how do I quickly select the last row?
Also, if I enter a formula in row 1 column 2, how do I quickly copy that formula down to row 1435, or to the end of the column? Dragging seems slow and awkward.
The process that you describe is inefficient.
The efficient one is :
create a table
enter the formulas in a single row
delete the rows below.
Now, each newly inserted row will contain the formulas.
From my point of view, it's when this is done that it will be interesting to apply a script adding rows.
Here is a script inserting rows.
--[SCRIPT insertRows]
Enregistrer le script en tant que Script : insertRows.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Sélectionner une cellule au-dessous de laquelle vous voulez insérer des lignes.
menu Scripts > Numbers > insertRows
Le script vous demande le nombre de lignes désiré puit insère celles-ci.
--=====
L'aide du Finder explique:
L'Utilitaire AppleScript permet d'activer le Menu des scripts :
Ouvrez l'Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case "Afficher le menu des scripts dans la barre de menus".
--=====
Save the script as a Script: insertRows.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Select a cell below which you want to insert rows.
menu Scripts > Numbers > insertRows
The script ask you the number of rows to insert then it does the required insertion.
--=====
The Finder's Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the "Show Script Menu in menu bar" checkbox.
Save this script as a … Script in the "Folder Actions Scripts" folder
<startupVolume>:Library:Scripts:Folder Action Scripts:
--=====
Yvan KOENIG (VALLAURIS, France)
2010/01/13
--=====
on run
set defaultValue to 100
if my parleAnglais() then
set myInteger to my askAnumber("Insert how many rows ?", defaultValue, "i")
else
set myInteger to my askAnumber("Combien de lignes voulez-vous insérer ?", defaultValue, "i")
end if
set {dName, sName, tName, rname, rowNum1, colNum1, rowNum2, colNum2} to my getSelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
repeat myInteger times
add row below row rowNum2
end repeat
end tell
end run
--=====
on getSelParams()
local r_Name, t_Name, s_Name, d_Name, col_Num1, row_Num1, col_Num2, row_Num2
set {d_Name, s_Name, t_Name, r_Name} to my getSelection()
if r_Name is missing value then
if my parleAnglais() then
error "No selected cells"
else
error "Il n'y a pas de cellule sélectionnée !"
end if
end if
set two_Names to my decoupe(r_Name, ":")
set {row_Num1, col_Num1} to my decipher(item 1 of two_Names, d_Name, s_Name, t_Name)
if item 2 of two_Names = item 1 of two_Names then
set {row_Num2, col_Num2} to {row_Num1, col_Num1}
else
set {row_Num2, col_Num2} to my decipher(item 2 of two_Names, d_Name, s_Name, t_Name)
end if
return {d_Name, s_Name, t_Name, r_Name, row_Num1, col_Num1, row_Num2, col_Num2}
end getSelParams
--=====
set {rowNumber, columnNumber} to my decipher(cellRef,docName,sheetName,tableName)
apply to named row or named column !
on decipher(n, d, s, t)
tell application "Numbers" to tell document d to tell sheet s to tell table t to return {address of row of cell n, address of column of cell n}
end decipher
--=====
set { d_Name, s_Name, t_Name, r_Name} to my getSelection()
on getSelection()
local _, theRange, theTable, theSheet, theDoc, errMsg, errNum
tell application "Numbers" to tell document 1
repeat with i from 1 to the count of sheets
tell sheet i
set x to the count of tables
if x > 0 then
repeat with y from 1 to x
try
(selection range of table y) as text
on error errMsg number errNum
set {_, theRange, _, theTable, _, theSheet, _, theDoc} to my decoupe(errMsg, quote)
return {theDoc, theSheet, theTable, theRange}
end try
end repeat -- y
end if -- x>0
end tell -- sheet
end repeat -- i
end tell -- document
return {missing value, missing value, missing value, missing value}
end getSelection
--=====
on decoupe(t, d)
local l
set AppleScript's text item delimiters to d
set l to text items of t
set AppleScript's text item delimiters to ""
return l
end decoupe
--=====
Asks for an entry and checks that it is an floating number
set myInteger to my askAnumber(Prompt, DefaultValue, "i")
set myFloating to my askAnumber(Prompt, DefaultValue, "f")
on askAnumber(lPrompt, lDefault, ForI)
local lPrompt, lDefault, n
tell application (path to frontmost application as string)
if ForI is "f" then
set n to text returned of (display dialog lPrompt & " (" & (1.2 as text) & ")" default answer lDefault as text)
try
set n to n as number (* try to convert the value as an number *)
return n
on error
if my parleAnglais() then
display alert "The value needs to be a floating number." & return & "Please try again."
else
display alert "La valeur saisie doit être un nombre décimal." & return & "Veuillez recommencer."
end if
end try
else
set n to text returned of (display dialog lPrompt default answer lDefault as text)
try
set n to n as integer (* try to convert the value as an integer *)
return n
on error
if my parleAnglais() then
display alert "The value needs to be an integer." & return & "Please try again."
else
display alert "La valeur saisie doit être un nombre entier." & return & "Veuillez recommencer."
end if
end try -- 1st attempt
end if -- ForI…
end tell -- application
Here if the first entry was not of the wanted class
second attempt *)
tell application (path to frontmost application as string)
if ForI is "f" then
set n to text returned of (display dialog lPrompt & " (" & (1.2 as text) & ")" default answer lDefault as text)
try
set n to n as number (* try to convert the value as an number *)
return n
on error
end try
else
set n to text returned of (display dialog lPrompt default answer lDefault as text)
try
set n to n as integer (* try to convert the value as an integer *)
return n
on error
end try -- 1st attempt
end if -- ForI…
end tell -- application
if my parleAnglais() then
error "The value you entered was not numerical !" & return & "Goodbye !"
else
error "La valeur saisie n’est pas numérique !" & return & "Au revoir !"
end if
end askAnumber
--=====
on parleAnglais()
local z
try
tell application "Numbers" to set z to localized string "Cancel"
on error
set z to "Cancel"
end try
return (z is not "Annuler")
end parleAnglais
--=====
--[/SCRIPT]
Yvan KOENIG (VALLAURIS, France) mercredi 13 janvier 2010 12:43:34 -
Incorrect doc.no.: 24. Select document number between 0090000000 and 009999
Hi All,
I created billing doc, it save and gave the number but with error on account determination, i checked the no range corrected it and got the error: Incorrect doc.no.: 24. Select document number between 0090000000 and 0099999999.
Please Help.
Maureen.I very much hope you've done it in a test system.
It seems that your document was given number 24, according to the number range that existed at that time. Then you went and changed the number range to 900000... and, naturally, number 24 is not within the valid range anymore. So what else did you expect?
If it was (fingers crossed) a test system, just forget about that document and create a new one. Otherwise you'll have to change the range back, then cancel the document 24 (make sure the cancellation does not post to accounting either), then change the range again. -
Types of watch points and break points
hi to all
what are the different types of watch points and break pointsHi Mahesh!
Breakpoints
In the Breakpoints area, you will see a list of all the breakpoints set so far. If one of the breakpoints has just been reached, this is marked with a yellow arrow. The visibility (Debugger, session, user) and type (line, ABAP command, u2026) is displayed for each breakpoint.
If you double click the Navigation() column, the system will display the breakpoint in the respective source code.
The visibility of a breakpoint can be changed through the dropdown list. To change the visibility of several breakpoints, mark them and select the pushbutton Save as Session Breakpoint or Save as User Breakpoint.
You can change the visibility of all Debugger breakpoints using the menu path Breakpoints-> Save Debugger BPs as -> ....
In addition, you have functions for creating, changing, activating and deactivating breakpoints at your disposal.
Watchpoints
In the Watchpoints area, you will see a list of all the watchpoints set so far. The watchpoint last set is highlighted with a yellow arrow.
For each watchpoint you will see not only the current value but the value before the last changed. (Technically speaking, each time you create the watchpoint and each time the watchpoint variable is changed, a clone of this variable is created.)
In this way, you can always determine what changes have been made to the monitored variable. For complicated data structures, such as internal tables or structures, select the pushbutton u201ECompare Variablesu201C( ) and choose the Diff tool to compare the old and new variable values.
In addition, you have functions for creating, changing, activating and deactivating watchpoints at your disposal.
For details
http://help.sap.com/saphelp_nw70/helpdata/en/e2/5f5a42ed221253e10000000a155106/content.htm
Reward points if helpful. -
Dear Experts,
If i want to see PO Number in FBL1N and FBL3N what is the procedure?
useful answers duely rewardedHi
First of all I assume you want to see on GR/IR accounts the Po number and item.
Normally you will see this. You can prevent this by switching on summarization
transaction OBCY. Check procedures MKPF and RMRP for ebeln and ebelp. This is done to have
line items kept to a minimum.
The vendor line is different matter as invoice verification and goods receipt both
have to option to post more then one PO at the time. Secondly the vendor line items
are not posted because of article lines/PO items but the header record of MIRO. Normally never
a PO reference there. If your business process assures one PO per invoice you could use the text line
at invoice entry. This will then be shown on the vendor line, but extra manual effort. If you are at least on ECC 5.O you could use badi (se19 and SE18) AC_DOCUMENT and with a simple statement could at teh PO numer to the vendor line in assignement field. And as third instat of useing FBL1N you could use a query on LDB KDF also there you could define a additional field to retrieve the PO number.
enough opitions
Kind regards
Hendrik -
FM to get Personel Number from USER ID
Hi,
Is there any FM to get Personel Number from the USER ID(sy-uname).
Thank you,
Ramu N.Hi Ramu,
You can find the user-id & Personnel Number in the table PA0105.
select single PERNR from pa0105 into PERSONEELSNUMMER
where usrid eq USER_ID
and endda eq '99991231'.
hope this helps!
best regards,
Thangesh
Maybe you are looking for
-
Firefox 4.0 Vista 32 bit I will have a tab open, and click on a link, new page loads. The Back and Forward buttons do not work. Usually it shows in history (unless I opened too many pages before clicking on link). This has happened several times. It
-
Communication issue btw applications on SAP J2EE Engine6.20 & Websphere 6.0
We have a customized SAP IPC application running on SAP J2EE Engine 6.20 and it is communicating with another application called Common Configurator or C2 running on WebSphere 4.0.5. Communication between customized SAP IPC application and C2 applica
-
I am not able to login using my blackberry id
Hi, I recently got blackberry storm2 from my brother. I have changed sim also I have registered my mail ID.I am trying to configure blackberry ID but it's not accepting.It's saying that ur smartphone is not associated with the blackberry id.Please le
-
AD Property Mapping - Missing AD attributes
Hi there I have been trying to find a way to expose a particular attribute in AD in my synchronisation connection in SharePoint 2013. The AD value is OtherTelephone, but this is not appearing in the list of attributes associated to my data source con
-
Saving versions of excel and word docs to CD
I can't believe what I have just learned. Recently converted to Mac from PC. In Windows you can save version after version, in the same session, or in successive sessions, open them (Read Only), make changes, do a Save As, all of these things, right