Reg PI 7.1 Configuration
Hi Guys,
Any one give me Configuration details for PI7.1
Thanks
Hi,
The normal configuration is the same as in 7.0
In 7.1 we have Business Component instead of Business Service.....
http://help.sap.com/saphelp_nwpi71/helpdata/en/b9/64663c7a6c2545ae292fb26d8c33c4/frameset.htm
OR is it that you want to install PI7.1??
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0b89317-6290-2b10-a4ac-8ed5d0f06cad
Can you tell what configuration are you looking for??
Regards,
Abhishek.
Similar Messages
-
Reg:: OEM Grid console configuration/implementation
Folks,
This is regarding implementation of OEM grid control on R12 EBS and 11g R2 database .
pls advice that how to proceed . what is AMP and how it is related to OEM and what is the necessary for R12 EBS
ThanksHi;
Please see our previous same topic which is answered by Hussein Sawwan posts
Follows below thread please
Configure OEM in EBS R12
Re: OEM & EBS
Regard
Helios -
Reg:Error in Test Configure
Hi Guys,
My sce is File to Rfc while testing in Test Configure in ID it giving error as Interface Determination and Operation Mapping not found but when i was trigger from RWB it Processed sucess,can anyone give me solution for this Error
ThanksDear Jayan,
Check the following things.
IR
1. Sender File (Check whether the data type, message type, message interface created properly)
2. Receiver RFC (Check the RFC imported correctly)
3. Check Message Mapping and Interface Mapping have done properly. You can test the mapping under Test tab.
Finally check all the IR objects are activated or not.
ID
1. Receiver should be business system, which is configured in SLD
2. In interface determination check the sender interface, receiver interface and interface mapping are configured correctly. (According to your statement here will be the problem, so check this thoroughly)
3. Also check all the other objects Sender Agreement, Receiver determination and Receiver Agreement configured correctly.
Finally check all the ID objects are activated or not.
Regards,
JP. -
Reg Sender AS2 module configuration for text file
Hi Experts,
I am working on an inbound scenario where Sender is AS2 and Receiver is SAP system in PI7.4. The Sender Trading Partner is Sending a text file which should be converted to xml. I have added the module parameter localjbs/PlainConverterModule .It is throwing the error as per the attached file.
Could anyone please guide me on this issue. Also Please let me know whether any configuration needs to be set in EDI content Manager.
Cheers,
NeethuHi Neethu,
according to the b2b help the module is used to convert EDIFACT message standards into XML. I your case you have flat file comming from AS2. you can use message transform bean to convert flat file to XML in sender as2 adapter. Or you need to define ED XML converter. Please refer the below link
SAP PI: Using the B2BADDON EDI<>XML Convertor Modules - Basics
You configure the communication channels of any Process Integration adapter with the PLAIN-XML converter module to convert business documents encoded in EDIFACT message standards into XML and the other way round. It must be configured in the sender and receiver channels based on the business scenario. The PLAIN-XML converter module runs on the SAP NetWeaver Process Integration Adapter framework.
You use this procedure to configure the parameters of the PLAIN-XML converter module.
source - Configuring the PLAIN-XML Converter Module - SAP NetWeaver Process Integration, business-to-business add-on 1 - SAP Libr…
regards,
Harish -
Reg. Microsoft FrontPage configuration
how to know Microsoft FrontPage configuration info in SP
The SharePoint Team Services dialogview client SHOULD perform an HTTP HEAD request, as specified in
[RFC2616], section 9.4 against owssvr.dll (for details, see section
3.1.3). If the return code from the server is 200, the client SHOULD perform an HTTP GET, as specified in
[RFC2616], section 9.3 to retrieve the full page body. If the return code from the server is 410, the client MUST NOT perform an HTTP GET on the server.
http://msdn.microsoft.com/en-us/library/jj575337%28v=office.12%29.aspx
http://msdn.microsoft.com/en-us/library/jj557128%28v=office.12%29.aspx
http://www.acunetix.com/vulnerabilities/microsoft-frontpage-confi/
Upgrade Frontpage Server Extensions to the latest version. -
Reg: SMTP Mail server configuration
Hi Experts:
Could you please tell me is it possible to configure to mail servers in the same ECC system, If it possible please tell me the steps.
Regards,
KishorejakHello,
my ECC 6.04 system says this is not possible:
... It is also not possible to create more SMTP nodes. The SMTP node only exists once in the system....
This is copied from the help text when i tried to copy the SMTP node in transaction SCOT.
So i think you have to solve this externally by some mail technique, but i am no expert in this area.
Regards
Christian -
Reg: Rapid Application tool configuration
Hello All,
How to configure the Rapid Application Tool in CRM 7.0 EHP1.
I have gone through the below links.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e02ba965-ebcf-2e10-7494-96603021e2f1
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0aa2331-edcf-2e10-2daa-ff0dbbf2e8dc
Now I need to know what are the initial steps to be done for the Rapid Application tool configuration.
How can I get the links to create a Rapid Appliction in Web UI.
Please let me know if any one has done this configuration before.
Thanks in advance.
Thanks and Regards,
Raghu DandaResolved
-
Reg.AFS documents and configuration guide
Dear Experts
Anyone could help me giving AFS documents and configuration guide.
Thanks
Rajakumar.KHi,
Try below link...
http://help.sap.com/bp_blv1600/V5600/BL_IN/html/index.htm
Go to technical information >building block library
You will get all the config and BPPs
Regards
Ali
Edited by: Julfikar Ali on Nov 3, 2008 1:12 PM -
Reg. Project System configure documents
Hi Guru's
Can any body able to provide me the bpp or congifure doc of ps module along with ppt of operation transaction and tagging of master data with other modules.
RegardsHi
Please check help.sap.com and you will get all the required information on line.
Thanks -
Configuring to receive a iDoc in R/3 sent by XI
XI send a idoc( inbound - ORDERS05 ) to R/3, but occurs an ALE error, what's the basic settings that must to be done in R/3 to send iDoc(inbound) from XI to R/3 ?
Is it necessary to configure a port to XI in IDX1 in R/3 ?Hi Regis,
U have to configure Port using IDX1 in XI where an RFC destination is to be mentioned which holds the recevier logon details...
And in the receiver maintain the partner profile(Inbound parameters needed to be handled...(WE30))
Regards,
Sridhar -
Password reset problems in planning and shared services
We had all our repository passwords expire today(by some default).We had to reset them(and set them to not expire!).
According to the epm 11 admin guide, we have to reconfigure database for all applications using the config tool-which we did.
Now in the config tool, we find that none of the apps are configured(except for the database part) or deployed.When we try to reconfigure/redeploy, it errors out.
Found this in the eas-sysout.log:(our weblogic password hasnt changed):
+_<Jun 15, 2011 1:53:21 PM EDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA JRockit(R) Version R27.6.5-32_o-121899-1.6.0_14-20091001-2107-windows-ia32 from BEA Systems, Inc.>_+
_<Jun 15, 2011 1:53:25 PM EDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.2.0 Tue Oct 20 12:16:15 PDT 2009 1267925_
WebLogic Server 10.3 Tue Oct 20 12:16:15 PDT 2009 1267925+
WebLogic Server 10.3 Tue Oct 20 12:16:15 PDT 2009 1267925 >+
+_<Jun 15, 2011 1:53:28 PM EDT> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at http://localhost:7001.>_+
+_<Jun 15, 2011 1:53:28 PM EDT> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>_+
+_<Jun 15, 2011 1:53:28 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>_+
+_<Jun 15, 2011 1:53:28 PM EDT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>_+
+_<Jun 15, 2011 1:53:29 PM EDT> <Notice> <LoggingService> <BEA-320400> <The log file D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>_+
+_<Jun 15, 2011 1:53:29 PM EDT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log00133. Log messages will continue to be logged in D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log.>_+
+_<Jun 15, 2011 1:53:29 PM EDT> <Notice> <Log Management> <BEA-170019> <The server log file D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log is opened. All server side log events will be written to this file.>_+
+_<Jun 15, 2011 1:53:38 PM EDT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>_+
+_<Jun 15, 2011 1:53:42 PM EDT> <Warning> <JTA> <BEA-110503> <The migrator(the AdminServer for manual JTA migration policy, or the Singleton Master for automatic JTA migration policy) is not available. Will skip JTA TRS failback because isStrictOwnershipCheck is [false]. This may lead to potencial TLOG corruption if TRS of EssbaseAdminServices0 has been migrated to backup server and the backup server is accessing the TLOG of EssbaseAdminServices0. More safety can be achieved by setting isStrictOwnershipCheck to [true].>_+
+_<Jun 15, 2011 1:53:56 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>_+
+_<Jun 15, 2011 1:53:56 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>_+
_<Jun 15, 2011 1:54:02 PM EDT> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'EPMSystemRegistry' due to error weblogic.application.ModuleException: ._
weblogic.application.ModuleException:+
_ at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:290)_
_ at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)_
_ at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:391)_
_ at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)_
_ at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:59)_
_ Truncated. see log file for complete stacktrace_
Caused By: weblogic.common.resourcepool.ResourceSystemException:+
Could not connect to 'oracle.jdbc.OracleDriver'.+
The returned message is: ORA-01017: invalid username/password; logon denied+
It is likely that the login or password is not valid.+
It is also possible that something else is invalid in+
the configuration or that the database is not available.+
_ at weblogic.jdbc.common.internal.JDBCUtil.parseException(JDBCUtil.java:300)_
_ at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(ConnectionEnvFactory.java:344)_
_ at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:220)_
_ at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1180)_
_ at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1104)_
_ Truncated. see log file for complete stacktrace_
+_>_+
_<Jun 15, 2011 1:54:03 PM EDT> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'eas_datasource' due to error weblogic.application.ModuleException: ._
weblogic.application.ModuleException:+
_ at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:290)_
_ at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)_
_ at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:391)_
_ at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)_
_ at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:59)_
_ Truncated. see log file for complete stacktrace_
Caused By: weblogic.common.resourcepool.ResourceSystemException:+
Could not connect to 'oracle.jdbc.OracleDriver'.+
The returned message is: ORA-01017: invalid username/password; logon denied+
It is likely that the login or password is not valid.+
It is also possible that something else is invalid in+
the configuration or that the database is not available.+
_ at weblogic.jdbc.common.internal.JDBCUtil.parseException(JDBCUtil.java:300)_
_ at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(ConnectionEnvFactory.java:344)_
_ at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:220)_
_ at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1180)_
_ at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1104)_
_ Truncated. see log file for complete stacktrace_
+_>_+
+_<Jun 15, 2011 1:54:13 PM EDT> <Emergency> <Deployer> <BEA-149259> <Server 'EssbaseAdminServices0' in cluster 'EssbaseAdminServices' is being brought up in administration state due to failed deployments.>_+
EPMORACLE_INSTANCE (D:\Oracle\Middleware\user_projects\epmsystem1) is set from JVM property[EPM_ORACLE_INSTANCE]._+
In lookupBRLWA()+
Found HBR product = ESSBASEPRODUCT_+
List of Web Applications for ADMINSERVICES_WEB_APP =_+
com.hyperion.hit.registry.LogicalWebAppComponentImpl@7b56e59d+
Using Web Application: Default+
Found HBR product = ESSBASEPRODUCT_+
HBR LWA Component = Default+
Default HBR = http://movmkn.na.bayer.cnb:10080/eas+
In getDBDetails()+
Found HBR product = ESSBASEPRODUCT_+
In lookupBRLWA()+
Found HBR product = ESSBASEPRODUCT_+
List of Web Applications for ADMINSERVICES_WEB_APP =_+
com.hyperion.hit.registry.LogicalWebAppComponentImpl@7b56e59d+
Using Web Application: Default+
HBR Configuration Initialized successfully.+
Setting HBR Mode to: 0+
+_=2011-06-15 13:54:34,538 WARN [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.hbr.core.AccessControlManagerServer - HBR repository is not configured. HBR will not be available._+
Essbase® Administration Services - Version 11.1.2.0.00.462+
Copyright © 1991, 2010 Oracle and/or its affiliates. All rights reserved. Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners. No portion hereof may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose other than the recipient's personal use, without the express written permission of Oracle.+
US Patent Number 5,359,724+
US Patent Number 6,317,750+
Current time stamp: Wed Jun 15 13:54:35 EDT 2011+
Server started successfully+
Waiting for client requests+
+_<Jun 15, 2011 1:54:40 PM EDT> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>_+
+_<Jun 15, 2011 1:54:40 PM EDT> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of EssbaseAdminServices.>_+
+_<Jun 15, 2011 1:54:45 PM EDT> <Warning> <Log Management> <BEA-170011> <The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.>_+
+_<Jun 15, 2011 1:55:10 PM EDT> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>_+
+_<Jun 15, 2011 1:55:11 PM EDT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks.>_+
+_<Jun 15, 2011 1:55:11 PM EDT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file D:\Oracle\Middleware\jrockit_160_14_R27.6.5-32\jre\lib\security\cacerts.>_+
+_<Jun 15, 2011 1:55:11 PM EDT> <Alert> <Security> <BEA-090152> <Demo trusted CA certificate is being used in production mode: [_+
+_[_+
Version: V3+
Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US+
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4+
Key: Sun RSA public key, 512 bits+
modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484772458983977898996276815440753+
public exponent: 65537+
_Validity: [From: Thu Mar 21 15:12:27 EST 2002,_+
+_To: Tue Mar 22 16:12:27 EDT 2022]_+
Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US+
_SerialNumber: [ 33f10648 fcde0deb 4199921f d64537f4]_+
Certificate Extensions: 1+
_[1]: ObjectId: 2.5.29.15 Criticality=true_
_KeyUsage [_+
KeyCertSign_+
_Algorithm: [MD5withRSA]_+
Signature:+
_0000: 9D 26 4C 29 C8 91 C3 A7 06 C3 24 6F AE B4 F8 82 .&L)......$o...._
_0010: 80 4D AA CB 7C 79 46 84 81 C4 66 95 F4 1E D8 C4 .M...yF...f....._
_0020: E9 B7 D9 7C E2 23 33 A4 B7 21 E0 AA 54 2B 4A FF .....#3..!..TJ._+
_0030: CB 21 20 88 81 21 DB AC 90 54 D8 7D 79 63 23 3C .! ..!...T..yc#<_
+_] The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.>_+
+_<Jun 15, 2011 1:55:11 PM EDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>_+
+_<Jun 15, 2011 1:55:11 PM EDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>_+
+_<Jun 15, 2011 1:55:11 PM EDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>_+
+_<Jun 15, 2011 1:55:11 PM EDT> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>_+
+_<Jun 15, 2011 1:55:11 PM EDT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.84.80.147:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>_+
+_<Jun 15, 2011 1:55:11 PM EDT> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[1]" is now listening on 127.0.0.1:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>_+
+_<Jun 15, 2011 1:55:11 PM EDT> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 10.84.80.147:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>_+
+_<Jun 15, 2011 1:55:11 PM EDT> <Notice> <WebLogicServer> <BEA-000358> <Started WebLogic Independent Managed Server "EssbaseAdminServices0" for domain "EPMSystem" running in Production Mode>_+
+_<Jun 15, 2011 1:55:11 PM EDT> <Warning> <JMX> <BEA-149510> <Unable to establish JMX Connectivity with the Adminstration Server AdminServer at <JMXServiceURL:null>.>_+
+_<Jun 15, 2011 1:55:11 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>_+
+_<Jun 15, 2011 1:55:11 PM EDT> <Notice> <WebLogicServer> <BEA-000360> <Server started in ADMIN mode>_+
+_<Jun 15, 2011 2:24:04 PM EDT> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>_+What I am saying is when you start up the configurator it checks the information in reg.properties so the configurator can connect to the shared services registry and retrieve information, if the password changed and you started up the configurator I would assume that it could not connect to the registry.
Anyway seeing as you are this far along have you tried updating the password for foundation database in the configurator and then redeploying the web application, does foundation start up?
Cheers
John
http://john-goodwin.blogspot.com/ -
Setup Ultra Search - CTXSYS schema in 9.2.0.6
Hello
I need help to setup UltraSearch Text,
I've look everywhere and I still can't find how setup the CTXSYS schema that allows ultra Search.
Any help is welcome
RgdsHi,
See if the following can help you in any way:
Oracle Ultra Search User's Guide Release 9.0.3
http://download.oracle.com/docs/cd/B10191_01/ultra.903/b10043/migrate.htm
Oracle® Application Server Portal Configuration Guide 10g (9.0.4)
http://www.deakin.edu.au/its/dba/oracle-doco/9.0.4.1/9.0.4_doc_library/portal.904/b13675/cg_srch.htm
Oracle Text Setup
http://www.informit.com/articles/article.aspx?p=408893&seqNum=3
Regards,
Naveed. -
Is XS Project right for Database Schema and tables
Hi Friends
1.As per OpenSAP video it is suggesting to use XS Project for Database objects.
In my case I am planning to do AO Reporting and not creating any UI , is XS project still the right project type.
There is an option for General ->Project - would that be the right one.
2. Also in my UI I am not able to see the Prefrences->SAP Hana Development ->Repository Access to set the regit.exe. I did see couple of post mentioned about it but the response was not very clear , hence asking the question again.
regards
PoonamHi Poonam,
Poonam Hemrajani wrote:
1.As per OpenSAP video it is suggesting to use XS Project for Database objects.
In my case I am planning to do AO Reporting and not creating any UI , is XS project still the right project type.
There is an option for General ->Project - would that be the right one.
Project is used to group all the required development artifacts and the libraries required for them. So based on your requirement you can choose. I think "General" project would suffice your requirement if it is only to create schemas and tables.
But on the other hand if you choose to build an application using XS related libraries you can either choose to import those libraries later or create using a XS project now.
Will wait along with you to see Thomas Jung comments on this.
Poonam Hemrajani wrote:
2. Also in my UI I am not able to see the Prefrences->SAP Hana Development ->Repository Access to set the regit.exe. I did see couple of post mentioned about it but the response was not very clear , hence asking the question again.
Firstly from SP7, it is not required to setup regi.exe file. This file resides in hdbclient folder. So you need to check where you have installed hdbclient to see if you have that regi.exe file and configure it accordingly in the Path ( Preferences --> SAP HANA Development --> Repository Access ) you mentioned.
Regards,
Krishna Tangudu -
Can't open someones others calendar with Outlook Connector
Hi,
I can't open someones others calendar from within Outlook Connector. Outlook 2003 complains: Your profile is not configured to .....
What could be the reason and what's a possible solution ? I can open my calendar on the server, with the Calendar Client, I can open someones calendar, also with the Webclient.
Regs
EricStrange - I just configured 3 users with shared calendars, all running Office 20043/Outlook. This works fine, and all are able to watch each others calendar when the set up a meeting.
To be able to fully read another users calendar, I suppose the calendar owner must grant you rights to modify on behalf of the him? -
Lync 2013 Edge replication not working
hi, I have a Lync 2013 Edge replication issue - it is simply not working.
UpToDate : False
ReplicaFqdn : LyncEdge.contoso.com
I have already checked the following:
1) telnet from FEP servers to the Edge sever on port 4443 is working
2) Certificates are installed correctly - Lync Federation, Voice/Video to Skype, Lync Mobile is all working fine.
3) Replication traffic checking showing the following error in XDS logs:
(000000000126DB35)[FileTransferTask(11, 9/03/2015 2:44:24 PM): {TASK_NOT_STARTED, fromReplica, [lyncedge.contoso.com, HttpsWebService, 4443], 0}] Failed to copy files from replica. Exception: [System.ServiceModel.Security.MessageSecurityException: The HTTP
request was forbidden with client authentication scheme 'Anonymous'. ---> System.Net.WebException: The remote server returned an error: (403) Forbidden.
at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.HttpChannelUtilities.ValidateAuthentication(HttpWebRequest request, HttpWebResponse response, WebException responseException, HttpChannelFactory factory)
at System.ServiceModel.Channels.HttpChannelUtilities.ValidateRequestReplyResponse(HttpWebRequest request, HttpWebResponse response, HttpChannelFactory factory, WebException responseException, ChannelBinding channelBinding)
at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.Rtc.Xds.Replication.Common.IReplicationWebService.DownloadFiles(String senderFqdn, String sourceDirPath, String tempDirPath)
at Microsoft.Rtc.Xds.Replication.FileTransfer.FileTransferTask.CopyFilesFromReplicaUsingWcf(String fromDir, String tmpDir, String toDir)]
I have checked certificate stores: there are only 34 certificates in the Root folder and the SendTrustedIssuerList reg. key has been configured, which did not solve the issue.
Any idea how to troubleshoot this or possible root causes?Try Test-CsComputer on the Frontend Servers and the Edge Servers. This should check Windows Firewall exceptions are correct. Then check permissions on your Lync fileshare. You can also try to reinstall CMS Database with the following command (user must be
memeber of CsAdministrator group and sysadmin group of SQL Server)
Install-CsDatabase -CentralManagementDatabase -SqlServerFqdn CMS.FQDN
-SqlInstanceName DBInstance -Verbose
Maybe you are looking for
-
I have a desktop at work, and a desktop and laptop at home and just recently the "restore previous session" button that comes up when I use the desktop icon to start a Firefox Web browser session does not work. It is there and I click it but nothing
-
Movement type for a goods receipt for u201CRelease order for a PRqRel"
There is an intercompany sales at our case. Plant B enters the customer order by VA01. The requirements rooting from the customer order are bought from plant A by Plant B. u201CRelease order for a stock transfer requisitionu201D is created automatic
-
Windows 8.1 Firewall + Microsoft Account Logon
Hi, I am a frequent SkyDrive user. With Windows 8.1, the SkyDrive integration has changed. In order to use SkyDrive, I have to register with my Microsoft account at my local machine now. I am actually fine with that design decision of yours. But I al
-
Postings to G/L accounts with open item management are not permitted
Dear all, i am getting one error FB01L ledger specific posting for ledger group L2 ledger (IFRS) error is "postingst o GL accounts with open item management are not permitted " i am posting both gl accounts are balance sheet account, please help m
-
I've got a big trouble. First, I'm trying to do mapping using Java Coding based on the TopLink Developer's Guide. I'm using a Employee's Table as usual, but here is the problem, I can not do inserting on the database after I do mapping. As a note, th