Reg : pi scenarios
Hi Guru's,
I am new to sap pi,where i will get real time scenarios to practice.
please help me.
Thanks&Regards,
kumar.
Hi Kumar,
Try to search in SDN you would find number of scenarios. Please check in SDN before posting.
Thanks,
Similar Messages
-
HI everyone,
Can some body able to tell me where i can get some scenario's for BPC5.1 to work on.
Regards,
K>Naresh Kumar Reddy.Hi ,
I suggest you check out the SAP Best Practices site for BPC:
http://help.sap.com/bp_bpcv151/html/index.htm
Also review the HTG guides:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/bpx/corporatePerformanceManagement%28CPM%29How-to+Guides&
https://websmp203.sap-ag.de/instguidescpm-bpc
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/50e76db5-874d-2a10-1abc-c757bd5d3a71 [original link is broken]
Hope this helps,
Regards
CSM Reddy -
I have no idea on what and how or anything abour SRM system and its components.
But now I have to Integrate EBP & SUS (What are they & their purpose?) in SRM for exchange of some data like PO as attachments.I also have to send the same to R/3 also.
Is it possible? If yes, please let me know the steps to be followed or any blogs on this kindaa scenarios.
Thanks
sivahi check the belowlinks for reference
Supplier Relationship Management - SAP SRM Partner Interface (B2B-OPI) [original link is broken]
https:/.../sdn/articles-topic?rid=/webcontent/uuid/c0507297-65a0-2a10-8d8c-f160c3641350&startIndex=81
SAP Supplier Relationship Management - SAP SRM Open Catalog Interface (B2B-OCI) [original link is broken]
note:reward points if solution found helpfull.....
regards
chandrakanth.k -
Hi All,
My scenario is Portal(SOAP)- - - R/3(RFC)- - - MDM
The webservice(Asyn) is being triggered from the portal ,it will update the data into ECC system by using a RFC(syn) and from the response(status) of the RFC the message is passed to the MDM server.
Could anyone suggest me on how to proceed the above stated scenario.
Thanks in Advance.
Regards,
LavanyaUse Async Sync bridge pattern with BPM
Soap sender (async) ---> RFC(sync) --> Proxy or Idoc (async)
For Soap sender refer this document
To configure Asynchronous
use Quality of Service: Exactly Once
Follow this link for soap sender configuration
http://help.sap.com/saphelp_nw04/helpdata/en/fc/5ad93f130f9215e10000000a155106/content.htm
For Async sync pattern use this link... also Refer below link does RFC (sync)
http://www.riyaz.net/blog/a-step-by-step-guide-to-bpm-asynch-sync-bridge/technology/sap/170/
For Proxy or Idoc at the target side... This below link gives abap proxy receiver details
http://wiki.sdn.sap.com/wiki/display/XI/Step-by-stepFTPtoABAPProxy
Hope this helps. -
Hi All,
My actual requirement is,need to trigger a the database(Oracle9i) on a daily basis for a scheduled time and in receiver side it has to post the xml file to 1) FTP server,2)as mail and 3) to portal as a web service.
Can someone please suggest me how do this scenario.
Thanks in Advance
Lavanya.BHi Lavanya,
Please clarify some points
you want to place same data in three receivers or based on conditions you havt ot send data??
You can acieve it using BPM(if you send ding same data to 3 receivers)
or you can acieve it using Enhance receievr determination if sending data besed on Conditions.
Use JDBC Sender define the structure follow stanndarad procedure XI interface Development.
receiver side use File,SOAP,Mail adapter.
Cheers,
Raj -
Dear all,
Please clear my doubt what is the difference in REM profile when , we create REM profile we use in control data back flush from standard cost estimate for material instead of data from product cost collector
Can we use normal routing in place of rate routing in REM scenario
Regards
venkatDear Venkat,
Yes we can use a normal routing instead of rate routing in REM scenario.
When creating REM profile you have 2 option whether to post activities and whether to post as per the standard cost estimate
details or based on the preliminary cost estimate of the product cost collector.
If the option is elected for standard cost estimat is a mandatory before production booking that's backflush using MFBF.
Check and revert back with your queries.
Regards
Mangalraj.S -
Handling web service error in BPM
My scenario is get a message from a data base and call web service using that, if web service is available get the response from web service and send it back to data base, incase web service call is unavailable.
When web service is unavilable Iam getting a fault message back and could not proceed. I have a seperate blco to do web service call, in that I have Synchronous send step in BPM, and selected default system error under Exception.
My requirment is when SOAP fault occurs I need to send the data back to data base else proceed if web service call is sucessful.Looks like we can not handle fault messages in BPM.
Before I close this thread. just wanted to give little more explanation reg. my scenario.
Business scenario - Pull the data from Data base using a Stroed Procedure(this marks the records once it is successful) and call web service using this data. If web service call is success, push the response received from web service to Data Base. If call to web service fails, still push the data which was pulled initially from database back to same location in database.
Iam using BPM to get the message from Data Base using JDBC sender adapter, once I got the data Asynchronously into BPM Iam using Synchronous send step to call web service, in the properties section, I have specified request message (abstract asynchronous, ) response message (abstract asynchronous) , Receive from - SendContext and selected default option which is ExWebserviceCall for SystemError.
I have an exception branch for this synchronous send step, which is working good incase of system error.
This is working good when I tried to testing using invalid URL for target system. When web service itself is down , in this case Iam getting SOAP Fault back with HTTP code 500.
In SXMB_MONI, under error - it is showing as this error is related to application , which I think is application error.
When this happens my process is not working.
Edited by: Vamsi on Aug 26, 2010 4:31 PM -
Issue in calling Adapter Module
Hi experts,
We have a File -
> IDoc scenario where the file has got fixed length data. The data is in the following format:
Header xdfsdfefefeswefr
Detail dfdkfereorierwer
Detail fdfkjwoeiefiwere
Detail
Trailer erererewoirwoiwe
We do not have any identifier to identify the header, detail and trailer record.
We have gone for custom java adapter module which inserts H, D, T as the first character of each line in the file to identify the Header, Detail and Trailer nodes.
We added a entry for calling the adapter module under the module tab in file sender communciation channel. The EAR for adapter module has been deployed successfully.
But we are unable to call the adapter module at runtime.
The channle log has no indication wrt to the module being called.
We are on SAP XI 3.0 SP17
If any one has faced a similar issue. Please respond and your help would be highly appreciated.
regards,
YounusHi,
Check this document.Nice document on adding an adpater module at runtime.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00838345-708c-2a10-1199-9514c0b0a91c
this forum replies too..
Reg Integration Scenario
Thanks,
Vijaya. -
Calendar popup in WAD - Urgent
In web application designer - I need to incorporte date function which should have a calendar popup. I need to select date from the calendar.
This is happening in bex - query level, but when use the same query in WAD , it is not showing the popup.
Give me your valuble suggestion to incorporate in our real time scenario.
regards,
Girihi kiran,
thx for your spontaneous reply,
reg. my scenario i already enabled the force variable option, but still i am not getting a calenar like popup.
for example, the user wants to enter your date of birth, u will be displayed with the calendar month popup, u can select the date from the popup.
kindly forward your suggestion, i will asssign points if its useful
regards
giri -
Reg:F-28 Transaction Layout - Return and Credit Memo Scenario
Hi All,
In the F-28 Transaction am choosing Settings->Line Layout->Reference Credit For Returns Radio Button and have selected ok.
there i have included the fields as follows,
1.Sales Document
2.Document Number
3.Payment Reference
for normal sales order->Delivery->Invoice all the three columns showing Invoice Number Which is Correct.
if it is a return order or credit memo its showing return invoice in Sales Document and Document Number which is correct but its showing blank in Payment Reference Column actually i need Sales Invoice Number in that column, then only i can show for this return invoice this is referring to the sales invoice.
i have tried all possible combination's in the line layout and the fields for setting but nothing workout,could anybody clarify how can i overcome this scenario?Hi,
For your first scenario,
for a retun po of IC NB type, after creating the PO you need to deliver the same at VL10G. For the delivery system will allow to create the PGR . Prior to these steps you need to return the goods using 161 at MIGO.Please check this 161 stock posted to stock in transit.After PGR system will clear the stock in transit.
Now after claring the stock from transit try cancelling the MIGO 161 document.
For the second query,
Please review your question' When we make return STO from store to DC, ths stocks are issued at DC MAP (condition type P101)
Assume we issue 9 quantity from Store then
Store stock is 9 ea, stock value is (1000-(25*9)) = 775, MAP is 775/1 = 775
This transaction is causing major flactuation in store MAP (100 changed to 775),
Please review the third line.
Regards, -
Reg:file to idoc scenario
In a file-xi-idoc scenario i created a business service for legacy
system and a business system for R/3 receiver system
i didn't assign logical system for the sender business service
and assigned a logical system for the reciver business system
so while maintaining partner profile in the R/3 system
i have to give partner no:
partner type:
here the problem is my sender business service i didn't assign any logical system,and it is not of LS type
so then what do i need to give in the above two fields?
answers required brieflyHello,
you know this pdf:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c09b775e-e56e-2910-1187-d8eba09c7a4a
Could be helpful.
Regards
Patrick -
Reg:: Java Lang ERROR in File_2_RFC_File Scenario
Hi! Gurus,
I am doing File to RFC to File without BPM by using this below Blog..
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/file-rfc-file%28without+bpm%29&
I have seen your blog and its quite intersting and pretty. I tried your blog in the below mentioned Server.
PI 7.1 Server Make
Release NW07_06_REL
SPS Number 06
JDK Version jdk15
Build Time 2009-02-09 18:57
Kindly make a note the below mentioned points and please let me know where exactly I was strucked...
1. I sucessfully configured the below steps and I am able to retrieve the response from the RFC and I am able to see Success Flags in MONI on the both 2 messages. I configured like this..
IR::
Data Types and Message Types :: File Outbound and File Inbound.
Service Interface:: SI_FIle_Handling ( Outbound Synchronous which contains file Outbound service request File Inbound as Response message types )
Message Mappings:: 1. File Req to RFC req
2. RFC resp to File Resp
Interface Mappings:: 1 IM_FILE_RFC_FILE
ID::
*Configuration Scenario *, Business service one which cotnains 2 communiation channels (file sener and receiver) and Business System which contains RFC receiver channel.
Colloboration Agreemetns::
One Sender Agreement and one Receiver Agreement
Logical Routingsa::
One Interface determination and One Receiver Determination
Testing::
I am sending an XML message which contains EMP ID number as request tio RFC in MONI I am able to get EMP details also in the second message in Moni as response from R3 system
ISSUES::
1> Even though I have kept as delete mode in file sener the file is not getting deleting from FTP sender location and scenario is running continously polling and messages are coming cont in MONI
2) Even though I am able to see the response in MONI but I am not able to receive the Output file to the FTP Receiver location
3) In communication Channel I am getting these errors::
Audit Log for Message: a52a7bc0-11f8-11de-97cb-001d090e4bbe
Time Stamp Type Description
*_Error: java.lang.NullPointerException_*
2009-03-16 12:34:08 Information MP: entering1
2009-03-16 12:34:08 Information MP: processing local module localejbs/CallSapAdapter
2009-03-16 12:34:08 Information File Adapter Receiver processing started, required QoS ExactlyOnce
2009-03-16 12:34:08 Error MP: exception caught with cause java.lang.NullPointerException
2009-03-16 12:34:08 Error ROB: error during processing: com.sap.aii.af.lib.mp.module.ModuleException
Kindly resolve this issues and do the needful to me.
Regards::
Amar Srinivas EliHi! Praveen,
I cross checked from the past 2 days and finally I raised this forum. I dono where exactly I was strucked hence please guide me more in this issue.
Hi! Shabarish,
SP 06 in PI is SP 15 in XI
The modules required to work without BPM is available only from SP 19 on XI 3.0 and SP 10 on PI 7.0.
See I already given my adminstraction information I am not working on PI 7.0 I am working on PI 7.1 Release NW07_06_REL
SPS Number 06
kindly please check this and let me know few more sugestions on this issue.
Regards::
Amar Srinivas Eli
Edited by: Amar Srinivas Eli on Mar 16, 2009 3:57 PM -
Hi all,
I am trying to execute a synchronous Http to Jdbc Scenario using MS Access table as my back end.
In design part ,I have followed the steps like
1. Created a http req ,jdbc req, jdbc response ,and then http response in Data types and the in Message types.
2.Created Outbound MI with http req and http response as input and output messages respectively,then Inbound message interface with jdbc req and jdbc response as input and output messages respectively.
3.In Message mapping with Http req and jdbc req as request mappings and jdbc response and http response as Response mappings following the Action and access Steps.
Thats Fine with design part
IN Configuration Part, Since it is a Http Sender ,i didnt create any sender agreement and sender communicatin channel.
Then Configured Jdbc adapter properly and i am able to access my table with that.
While Executing ,I can find that my message is sent in Runtime workbench and can find that Jdbc adapter is Running by showing green flag.
I was trying to send an empid of a table as key and expecting to retrieve the complete row of the corresponding key.
But I could not find the response even though everything is fine with XI.
Where Could be the problem ,where can I see the response from jdbc adapter .
Please help me out in solving this .
Thanks and Regards,
KalpanaHi Kalpana,
Can you check this weblog
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
This should help you...
Check the Response Mapping,also you have one IM with Reqest and Response mapping...
Also if you have SP16 then you can have sender CC for HTTP also ...
Regards,
sridhar -
Reg error in flat file to flat file scenario
Hi techies,
Iam just starting working with XI scenarios.
In base flat file to flat file scenario which is mentioned in wiki.sdn
http://wiki.sdn.sap.com/wiki/display/XI/FLATFILETOFLATFILE
I had completed entire scenario. After generating sender file. Iam getting this error in runtime work bench.
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter 'CONTACTS.EMP.fieldFixedLengths' or 'CONTACTS.EMP.fieldSeparator' is missing
Please suggest how to resolve this error.
Thanks in advance,
Regards,
KiranHi,
From your error description,
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter 'CONTACTS.EMP.fieldFixedLengths' or 'CONTACTS.EMP.fieldSeparator' is missing
it is clear that you have missed out either or both the 2 parameters in receiver file adapter content conversion, namely EMP.fieldFixedLengths and EMP.fieldSeparator.
From the example that you followed, use the following values for the 2 parameteres is the output file is a comma separated file:
EMP.fieldFixedLengths: 8,10,10
EMP.fieldSeparator: ,
I have assumed that the lengths of the fields NAME,ADD,MOBILE are 8,10 and 10 respectively. Change them according to your requirement.
Use any other value in place of comma(,) in EMP.fieldSeparator according to the requirement.
Hope it helps you buddy!!!
Thanks
Biswajit
Edited by: 007biswa on Feb 22, 2011 9:25 AM
Edited by: 007biswa on Feb 22, 2011 9:28 AM -
Reg error in interface mapping in RFC to JDBC scenario
Hi Techies,
Iam trying to map the scenario RFC to JDBC.
In configuration window Iam testing the configuration.
when Iam testing it is giving the error.
" com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_mm_mapping_: Parsing an empty source. Root element expected! "
My mapping is as follows
mt_receiver
statement
ROW
action---insert
ZHRT002----
Table
Item----
access
MANDT
PERNR PERNR
PERID PERID
SHOPN SHOPN
Sender
<?xml version="1.0" encoding="UTF-8"?>
<ns0:ZTEST_PI_ZHRT002 xmlns:ns0="urn:sap-com:document:sap:rfc:functions">
<ZHRT002>
<item>
<MANDT/>
<PERNR/>
<PERID/>
</item>
</ZHRT002>
</ns0:ZTEST_PI_ZHRT002>
Reciver
<?xml version="1.0" encoding="UTF-8"?>
<ns1:mt_receiver xmlns:ns1="urn:sap-com:RFC2JDBC"><Statement1><ROW action="INSERT"><TABLE>ZHRT002</TABLE><access><PERNR></PERNR><PERID></PERID></access></ROW></Statement1></ns1:mt_receiver>
Please give suggestion how to go about this.
Thanks in advance,
Regards,
KiranHi,
Please check the payload you are using to test the configuration.
The structure seems to be Incorrect.
Regards,
Deepak
Maybe you are looking for
-
Creative cloud won't load, nor can I shut it down. Every time I click on the icon the drop down is blank. (using a mac)
-
we want to hide cash discount column in standard "post incoming payment" screen, is it possible by changing screen variant or user exit? I tried, but haven't got it, it seems only document number, Sales order number column can be hide
-
If I click on a hyperlink within a message on Thunderbird, I open an infinite stream of tabs on Firefox. What's happening? Yesterday I was able to close to close tabs and stop the progression; today I had to close Firefox entirely.
-
Weird error with placed .jpgs
Anybody else getting this? Whenever I place, touch, or move a .jpg file in Ai I get this pop-up error, but once cleared I can continue to work normally (until the next time I touch the .jpg). I've restarted, dumped prefs, etc. but it still happens. N
-
Cant get Photoshop CC to open?
I am completely new to anything adobe other than Lightroom 4. I signed up for the Photoshop CC + Lightroom 5 and followed all of the instructions. Once CC was installed on my computer, I downloaded Photoshop CC, lightroom 5 and Bridge, all of which a