Reg.Please help anyone

Dear All
Please consider my below problem and give the solution.When try to create Purchase order in ME21N(IDES) the following error occured.
Dear All
I try to create one Purchase order in our IDES system after entered the sale order the following error occured.
"SDI 180000087/1 is not assigned to a business area.
Message no. KI167
Diagnosis
Account assignment object 180000087/1, type SDI, is not assigned to any business area, although business area balances for company code TEST are to be generated.
System Response
In these company codes, all CO account assignment objects must be assigned to a business area.
Procedure
Assign SDI 180000087/1 to a business area."
I donn't know where to assign. Very urgent
Please help.
Thanks
Rajakumar

Dear Sir
As per your advise I deactived the business area,after that a new error occured
"G/L account 221002 cannot be used (please correct)
Message no. ME045
Diagnosis
Comparison of the field selection strings from the G/L account 221002 and the account assignment category E reveals that there is an incompatible combination of field selections for the field selection group 'Sales order'.
The G/L account field selection is stored in table T004F; that for the account assignment is stored in table T162K.
Procedure
Please enter a correct G/L account."
How to solve this problem
I used the Tcode OMSK,OMWM,OMWN,OMWD and OMWB
But now working the G/L account,that is not assigned automatically in the G/l acct field if I enter the plant and storage location.
Thanks
Rajakumar

Similar Messages

Customizing playlist impossible! please help, anyone...!

for the love of God, why can't i customize my playlists?! i want to click and drag tracks wherever i want when i buy an album of itunes store and burn it to a cd in the same order as the original album! this is just sick for apple to F with me like this... how can you not have that basic function when it comes to playlists? if anyone has any similar experience with the preceding rant, PLEASE help!

maybe you just need to click on the very first column on the left. You know, the one that has numbers 1,2,3. then you should be able to drag stuff around how you want.

Unable to install itunes 7 due to error "Bonjour service failed to start, verify you have sufficient privileges" mcafee is not blocking it, please help anyone?

I am unable to instal itunes (greater than version 7) as it gives me the error,"Bonjour service failed to start, verify you have sufficient privileges" , i have checked on apple support and the only help for this error says that mcafee antivirus is blocking the services however i have never had mcafee installed on my pc. Anyone any other ideas as to what could be wrong?

Hi doywks,
The Apple Mobile Device is a component of iTunes that communicates between your computer and your iPhone or iOS device. The error message you are seeing "verify that you have sufficient privileges to start system services" has to do with the Windows operating system. It's possible that you are not logged in as the administrator for your Windows PC. Or, you may have antivirus software stopping the Apple Mobile Device from running.
If you are having issues updating iTunes on your PC, follow the steps in the article below.
If you can't install or update iTunes for Windows - Apple Support
https://support.apple.com/en-us/HT201668
How to restart the Apple Mobile Device Service (AMDS) on Windows - Apple Support
https://support.apple.com/en-us/HT203188
I hope this information helps ....
- Judy

BEFW11S4 V.2 - Please Help, Anyone

I am trying to open ports 5631 and 5632 for pcAnywhere and I have tried port forwarding, port triggering and DMZ. My IP address is 192.168.1.20. I even tried doing a hard reset and doing a power cycle. I am still not having any luck. Does anyone know what is wrong with my router. I am going crazy trying to figure this out. I don't know what else to do.

all i can suggest at this moment is to check if you are using the latest firmware.

When i play certain songs on my ipod it doesn't have an album cover but did before how can i fix that? please help, anyone!

i have an ipod touch!

Settings>Music>Sound Check will HELP to normalise the volume of your music but it only averages it out.

IPhone 5S Push Notification Not Working At Times PLEASE Help Anyone??

I just got this as a replacement phone for the previous iPhone 5S which I SHOULD have kept that one since I wasn't having problems much. First of all, Twitter push notifications weren't working then fixed it by going to reset settings..NOW when I'm in 3G or 4G LTE mode, at times I'm NOT getting push notificatoins whenever someone sends me messages!! it used to send me messages and push notifications for my previous iPhones!! How can I fix this problem?? Does it sound like a software bug problem? if I update to the latest iOS version, should it work?? This happened when I first used this phone. Do you think it SHOULDNT be the device?? I am very NERVOUS because I don't want to get stuck to this 2 yr contract my mom yelled at me saying i cant do anymore replacements because it will cost extra which it did!! (shipping fee and also 30 dollars) .

Did you tried the button next to the volume?, to turn on or off the touchpad, is very sensitive.
If this doesnt works you can try :
- shut down the computer.
- disconnect the electricity
- remove the battery
- press the start button 20 seconds
after that,
- connect the battery and the electricity and turn on the computer.
I hope that works!
Regards,
Ana

ArrayIndexOutOfBoundsException problem, PLEASE HELP, anyone

when i try to run the main method on this code i get this error: java.lang.ArrayIndexOutOfBoundsException on: sortedNum[i] = tempNumStorage;
Any idea of the problem? import java.io.*;
public class StringCheck
public static int[] stringToArray(String s)
//split the string into tokens
String[] unsorted = s.split(" ");
//Temporary storage for
int[] tempNumStorage = new int[unsorted.length];
int size = 0;//to determine to size of THE array
int integers;//for valid numbers
for(int i = 0; i < unsorted.length; i++)
try
integers = Integer.parseInt(unsorted[i]);
tempNumStorage[i] = integers;
size ++;
}catch (NumberFormatException nfe){}
//sorted numbers storage array
int[] sortedNum = new int[size];
for (int i = 0; i < tempNumStorage.length; i++)
if (tempNumStorage[i] != 0)
sortedNum[i] = tempNumStorage[i];
return sortedNum;
public static boolean containSameElements(int[] a, int[] b)
int countOfTruths = 0; // to return true if a == b
if (a.length != b.length)
return false;
else
for(int i = 0; i < a.length; i++)
int aValue = a[i];//Value of A to be checked
for(int j = 0; j < a.length; j++)
//// int noChecker = 0;//to check if a != b
if(aValue == b[j])
countOfTruths ++;
if(countOfTruths == 0)//Value not in A
return false;
return true;
public static void main(String[] args)
int[] firstArray = stringToArray("jdf 556 787 55 tt yuu 457");
int[] secondArray = stringToArray("jef 556 yhh yt tu 787 457 55");
System.out.println("The strings: ");
System.out.println(" 1. \"jdf 556 787 55 ttt yuu 457\"");
System.out.println(" AND ");
System.out.println(" 2. \"jef 556 yhh yt tu 787 457 55\"");
System.out.print("will return ");
System.out.print(containSameElements(firstArray, secondArray));
System.out.println(" when checked");
Edited by: deyiengz on Jun 18, 2009 4:06 PM

Chicon, it needs to be lover because some of the strings that were not valid when i parsed them to integers were thrown away. Furthermore, on this code
for(int i = 0; i < unsorted.length; i++)
            try
                integers = Integer.parseInt(unsorted);
tempNumStorage[i] = integers;
size ++;
}catch (NumberFormatException nfe){}
//sorted numbers storage array
int[] sortedNum = new int[size];
for (int i = 0; i < tempNumStorage.length; i++)
if (tempNumStorage[i] != 0)
sortedNum[i] = tempNumStorage[i];
}my aim is to create an array with sorted valid integers.

TS1567 I followed this short tutorial,but I keep getting a error message. It reads "could not start AMD service on local computer error 1068: The depencey service or group failed to start" please help anyone?

Help

Try here:
How to restart the Apple Mobile Device Service (AMDS) on Windows
And also the apporopriate topic of:
iOS: Device not recognized in iTunes for Windows

T215D-S1160 - Please Help, Anyone.

Hello.
I recently purchased and installed the max amount of RAM (8Gigs) into the model mentioned in the title. Since then I have been unable to power up the laptop.
Here's the situation:
- I installed 8Gigs (4Gbx2) of Crucial RAM DDR3 PC3-8500 • CL=7 • Unbuffered • NON-ECC • DDR3-1066 • 1.5V • 512Meg x 64. The specs matched the stock RAM.
(With battery and power adapter plugged in) The power indicator light is lit. I'll press the power button and I'll see the On/Off light is on (not red). I'll here the fans kick in and the HDD spin up, but after about 2 seconds into the cycle, the laptop shuts down. It then immediately tries to go through the power up cycle again, but shuts down once more. It does this over and over... The only way for me to stop this cycle is to unplug the battery and AC adapter.
(Without battery, with power adapter plugged in only) I'll press the power button and the laptop will do the same as mentioned above.
**I tried pressing and holding the the power button for at least ten seconds and the result is the same.
*** AFTER 10 OR SO ATTEMPTS, I have BEEN ABLE TO GET IT TO POWER UP CORRECTLY AND MY OS WILL LOAD. The total RAM is recognized and all is great, but if I reboot or shut down, it will not start back up as expected.
Here's what I've tried:
- I have tried installing only one 4Gb module and it powers up fine.
- I try the same stick on the second RAM slot and it powers up fine.
- I use the second 4Gb module in one slot and it powers up fine.
- I try the same second 4Gb module in the other slot and it powers up fine.
- I try to use both modules and the result is what is mentioned above; an endless cycle of powering up.
- When I did manage to power it up successfully, I performed a few memory tests (Windows Memory Diagnostic and MemTest86+) and no errors were found.
- I contacted Toshiba support and they told me to purchase "Toshiba" memory...
- I contacted Crucial support and they said it should be compatible...
- I tried the RAM sticks in another Toshiba laptop (different model) that used the same spec'ed RAM and it powered up fine and recognized the 8Gigs.
IS THIS A HARDWARE FAILURE WITH THE LAPTOP?
COULD IT BE THE RAM?
Any assistance would be greatly appreciated.
Thank you.
Solved!
Go to Solution.

Well Jerry, I know it's been a while, but here's my update...
I RMA'd the Crucial RAM I originally purchased and they sent me a different set that they said were compatible. I tried them out, but STILL got the same results. I sent the second set back and got my refund.
I shopped around looking for a deal on the Kingston RAM that was advertised from Toshiba site and I found one at Amazon... but I noticed that a previous buyer had posted a comment on that RAM that pretty much sounded similar to my issue... Coincidence? I gave Kingston the benefit of the doubt and ordered the RAM.
When I got it (earlier this week), I quickly (and carefully) installed the modules and... no success. The system wouldn't boot. Now just for clarification... all this RMA'ing and refunding and reordering would probably have taken no more than a week for the average person. I, unfortunately, am overseas and so I had to wait two months!!! I was about to curse the world for all my frustrations when, lo and behold, I received an email from Toshiba yesterday referring to a support bulletin...
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/bulletin.jsp?soid=2976401
They released a BIOS update and, to make things short, it worked. Problem solved.
Probably not Crucial's fault. Probably not Kingston's. *Sigh*... Toshiba took long enough.
Thanks again.

I need to update my Apple ID to reflect my new e-mail address, but seem to have created a whole new Apple ID instead. Please help!

Hi- not sure if this is the right forum for this, but I'm hoping to merge my two Apple ID's, or at least get rid of the new one that isn't linked to either of my devices. I seem to have my old Apple ID, that is linked to my Iphone 4 and Mac Book Pro, Itunes etc. And my NEW Apple ID, with the correct e-mail address, that isn't linked to anything. I have tried to change my Apple ID by managing my account, but it won't let me change the e-mail address as the correct address is already being used. Please help, anyone!
Thank you,
Julie.

Hi Julie, I have the same issue (except to complicate matters even further the .me address I'd like to keep is an alias) and have spent over an hour on the 'Express Support' chat tonight; where I've been told that to date Apple will not merge two accounts and if you choose to delete one account, that .me address/ID will never be available again ... I did ask if this was something Apple were looking at changing, but was told:
"Once an @me.com email address is created once it is used forever. To create an account you would have to use an email address that would have never been used before. I wish there was a way for us to do that, however there is not. The only way to free up an @me.com email address would be if we recycled accounts and we currently are not doing that."
Crystal, the support technician, then went on to state:
"When you remove an alias from an account that permanently deletes it and makes it unable to be used again on that account it was deleted from or on another account."
followed (after my attempts at suggesting various work-arounds) by:
"Merging of Apple IDs is something that we are unable to do. There are a series of Apple Discussion Boards stating this as other customers discuss not be able to merge their IDs also. If you click on Frequently asked questions at this link, it also states that we cannot merge IDs: http://support.apple.com/kb/HT4895"
Bless Crystal, she really did try to help, but this looks like an option we'll just have to wait for! Hope this makes sense ...

Please help et mi nano working again

The following happened to me.
I copied file to my IPOD nano in windows explorer. After doing this my nanos is not recognized by windows. I get a message that the usb device is not working propely and I cant see the nano in the exporer anymore. It doesnt work with Itunes either.....
Please help anyone.. I have noidea what to do to get it working again
Thanks

Thanks for the tip.
I think that it could help if I can get my nano restored. The problem is that i cant get it to connect to the computer. When it doesnt connect to the computer I cant restore it that way. Is there any other way to restore the Ipod?
I tried to connect the nono ti two different PC:s. It got it connected before "pasting" the fili on the Ipod:s harddisk (copied and pasted in windows explorer). After I did this I only get the error message that there is something wrong with the connection.
Besides this the Ipod is working fine (can listen to music as earlier). It is even chargeing when it is connected to the usb cable. But I just cant get it to communicate with Win XP anymore.
Please give me some advise if anyone have a clue what to do or heard of someone with similar problem.
Thanks!

Itunes will not load, someone please help!?

i have read all the forums, and nothing is working for the technical help that I need, itunes will not load or work and no matter what help I am trying to seek, nothing is working. I have tried uninstalling, reinstalling, everything that people are advising but nothing seems to work. Basically each time I try to click on itunes to load, the timer appears but nothing else. I have just replaced my iphone and I cant get it to sync with my itunes so basically i cant use my phone either, please help anyone?! thanks, terri!

I believe the files need to be in MPEG-4 format. Or that is what I am converting my movies in and it works fine.
Movies you download off of iTunes are in M4V format, which is probably Apples MPEG-4 format name.

Import option not working - please help

Hi
I have MacBook Pro Retina 15 inch Early 2013. I use Motion (latest update 5.1.2) to convert my photo sequences to video files (time lapse). After importing first sequence I can export it with no problem. When I try to use Import option again nothing happens. I can see the cursor disappearing for a millisecond but import window is not showing at all and nothing happens. I have to restart Motion to import another file/photo sequence. Very frustrating and makes working in Motion impossible.
I noticed that this started to happen after I changed screen resolution so DaVinci Resolve could fit on the screen. I had it changed for one day and then went back to Default for Display option.
Please help anyone.
Regards
Marcin

The problem I described was that the import window was not showing at all after hitting import option (either from menu or by shortcut).
For anyone in the future - I deleted Motion completely from my system and installed it again. Worked out for me.

My ITunes won't connect to themusic store anymore!! Please help me!

When I try to connect to the music store I keep getting this message that I says that it can't connect and that I should check ny network connections and try again. I am using ITunes 4 with Windows XP Home Edition, Service Pack 2. I have tried Everything I could think of the Firewalls, the software it self and uninstalled and installed it again. Nothing works.
One day it was working fine then the next, it stops working. I even downloaded a newer version to see if the would some how fix it. But that didnt worj either. If I click on the option to check for updates that work on the ITunes, but not the music store.
Please help, anyone!! I am at the end of my rope!!!

Can you try these entries in command prompt (Run as Administrator for Win7/Vista) one at a time?
ipconfig /release
then
ipconfig /renew
restart computer
ipconfig /flushdns
totally shut down computer then restart.
netsh winsock reset all
restart computer
Now test your iTunes again. If that does not work, uninstall your Antivirus program and test again.

Please Help Updating FCPX 10.0.8 files to 10.1.1 - Manually Doesn't Work

Hello all,
I tried updating all my Events and Projects from FCP 10.1.1 after using it for awhile (explanation below) and it won't recognize them. After studying online, I've put my Final Cut Events and FC Projects folders in my boot internal Movies drive and on the boot of one of my external drives, but still FCP X 10.1.1 won't recognize them - they are visible but greyed out.
I have been able to import media from those folders, but without the project files it would be back to the drawing board - no good.
When I first opened FCPX 10.1.1 I only updated 1 project - a full length doc I was working on, because I didn't want to clog the system while working,
(I had to get a Digital Cinema Print made quick on my system) and because after reading the Read Me First Notes and white papers, it made it clear that I could update my files manually later.
So far, no go. Please help. I'm of course - like everyone else - on a deadline, and I have at least 10 short films/projects that are in various stages of
edits that need to be completed.
Tom Wolsky, you out there? Kevin Monahan? It's been awhile since I needed advice. Yes, I know, operator error...so it goes. Please help anyone.
Working on an iMac (Late 2012) 3.1 GHz Intel Core i7 with 16BG 1600 Mhz DDR3 Ram on OSX 10.9.3.
Cheers and thanks to this community.
Juri

UUpdating updates volumes. You don't have to select the project or event. They will always be grayed out. Simply select the hard drive you want to update.

Reg.Please help anyone

Similar Messages

Maybe you are looking for