Reg Po creation in ME21N

Hi all,
I am fresher in SAP MM module.
When i am creating PO in ME21 with reference to PR  , i am getting a short dump.
How can i create PO in ME21N  with reference to PR  ???
Kind regards
Karthik

hi,
There are 4 ways:
1.Either enter the PR no directly or choose it from the overview tree...
All the data will get copied from the PR to PO..change the doc if req.. check the doc...then posted it...
2. while creating PR you can directly posted it from the same document ..in the same same tcode you will the Tab saying the Post PO tab..if you click on it..it will directly post the same PO...
3. There is a field provided in the MMR for the material, called Auto PO if you tick on it...it will be automatically created...
4. PO can be also created via MRP...
Edited by: Priyanka Paltanwale on Jul 30, 2008 11:28 AM
Edited by: Priyanka Paltanwale on Jul 30, 2008 11:31 AM

Similar Messages

  • Batch creation through ME21N, ME22N and MSC1N

    Hi All,
    Please note we are already using EXIT_SAPLV01Z_001, EXIT_SAPLV01Z_002, EXIT_SAPLV01Z_003, EXIT_SAPLCLFM_002, EXIT_SAPLV01Z_012, EXIT_SAPLV01Z_014 for Batch creation based on different logics for Material type, Plant and PO doc type and currently using these exits for logic it allows us to create new internal batch number during PO creation (ii) change already existing batch with some new number (of couse this number must not be used in some other PO) in PO change and (iii) create new internal batch number using MSC1N, by inputing plant, stor. loc etc. But currently i can create batch with 1 digit, 2 digit, and so on.
    The requirement is to allow user to create batches only with 10 digits during:
    (i)PO creation (ME21N)and PO change(ME22N) and also during
    (ii) transaction MSC1N
    currently in all three ME21N, ME22N or MSC1N it allows to create batch with 1 digit, 2 digit,3 digit and so on . i want to create batch with only 10 digit.
    Please tell this is possible through configuration steps or some changes are required to be done in above said user exit.
    Regards
    Rahul Shukla

    Hi Jurgen,
    Thanks for your reply.
    In ME21N i am able to assign batch in PO
    (1) By clicking on 'create' button appearing just side of Batch field in item Tab "Material". I think this create button is appearing due to user exit being applied here. Here it creates and assigns internal number automatically (from range 01in Batch_Clt) based on the Material type and Plant combination (Some logic defined in user exit)
    (2) By putting any random number manually (both numeric and alphanumeric)whether 1 digit, 2 digit,3 digit in Batch field in item Tab "Material" it will accept and in this case also po is saved.
    same way i can do changes in batch number in ME22N and able to save.
    In MSC1N also due to user exit applied if i give Material number alone  and enter, it assignes the internal batch number based on Material type and plant logic defined in user exit.here also if i input some random number manually in batch field it accepts and that random batch number is created for material.
    Now i want that i should be able to put random batch number manually but that number must be out of the number ranges defined in Batch_CLT object (Also the number must be exact 10 digits length as is there in defined number ranges) and not any random alphanumeric number . Also i am not able to understand how it is accepting random alphanumeric number (like ABC111)although all number ranges defined are numeric only.Also external number range is 0008000001 - 0089999999 which is numeric only.
    Regards
    Rahul

  • Reg View creation in Generic

    Hi SDN,
    Im trying to create Generic Data source of View Method. I wanted to create View on BSID ( Closed Customer Invoices) and BSAD ( Open Customer invoices) Tables, But while creating its giving error as "THERE IS NO RELATION BETWEEN THE TABLES"  I want to know how to create Relation Between the tables. Both BSID & BSAD are standard tables, so we cant make any changes.
    Please let me know the procedure to bulid Rlation between the tables.
    Regards
    Sujan

    Hi Siva,
        You have to give relation between these two tables in tab "Table/Join Conditions".
    Creating Views:
    http://help.sap.com/saphelp_webas620/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
    View creation fr generic extraction
    Hope it Helps

  • Delivery address in PO Creation through ME21N

    Hi All,
    I want to change the Delivery Address in ME21N. By default this delivery address is the Plant address which we enter at the line item level. Now my requirement is to default the delivery address to other address based on the vendor given at the header level.
    I had tried User exit, MMDA0001 but this is not triggering, then tried BADI ME_PROCESS_PO_CUST method PROCESS_ITEM , even this does not help.
    Can anybody please let me if you had requirement like this and how you solve this problem.
    Thanks n Regards
    Maruthi

    Hi Mr A
    Please tell me which user exit did you use to resolve this issue because I have to also do extra validations and changes to some PO Items when user creates PO with ME21N.
    Thanks

  • Regarding purchase order creation using me21n

    Hi,
    I want to set default values for Purch. Org for a document type PO:Service-FREIGHT in me21n transsaction.
    which userexit or badi can be used for this?
    When a document type PO:Service-FREIGHT  is entered, Purch. Org should have deafualt value set automatically..
    Through 'Personal Settings' it is possible but it applies for all document type..& I need it for dot tytpe
    PO:Service-FREIGHT  .
    Thanks in advance...

    Hi
    Go to me21n transaction.
    click on personal setting icon.
    Once that is done -select default balues tab.
    And you can save the settings here.
    Check out this link:
    http://home.netlinc.org.uk/ContentStore/__Public/Documents/0022100/22147/C2-C4%20ME21N%20CREATE%20PERSONAL%20SETTINGS.pdf
    Regards
    Neha

  • Reg:challan creation for 701 movement type

    Dear All,
    Is there any possibility to create challan referring to the 701 movement type I've included the movement type for sub transaction type in SPRO but even then it is not allowing is there any possibility ?
    Reg
    VVK

    Hi
    U can create challan for 701 mvt.
    Make sure the mvt 701 is included in subcontracting issues group type with spl stock indicator O.
    make sure all other settings for subcontracting are correct like number ranges for series group of subcontracting, excise a/c for 57fc with subtrabsaction 01.
    Check  and revert with the problem u face bcoz i tried in my system and it worked.
    Reg
    Raja

  • Reg Vendor Creation Standard Service

    Hi,
    I am trying to work on a scenario involving Enterprise Services. Can some one please confirm on the Vendor Creation service from ES workplace.
    I browsed and could find this service. SupplierERPCreateRequest_In. But this service is Asynchronous. My scenario is a synchronous scenario. Can someone please provide some input whether I am using the correct service . if yes, then how can this be handled for synchronous communication.

    Not really much to add to what Roshan said. You may want to check BAPI_VENDOR_CREATE Create Online if that suits your business needs better (but being a BAPI you do not have any service interface for that)
    Cheers

  • Update text in creation mode ME21N

    Hi,
    How to update text in texts tab while creating PO .
    Thanks

    Hi,
    Have a look to OSS note :
    Note 432689 - ME21N: Changes to texts are not adopted.
    Regards
    Kiran Sure

  • Auto sales order creation upon ME21N

    Hi,
    I am wondering if there is a way in configuration to automatically create a sales order document upon a PO creation?
    If standard not possible, can I do it via user-exit?
    Thanks
    YY

    Hi Ganesh,
    Basically we would like a sales order to create on the other side (i.e. client. This client is our associate company) upon PO creation.
    I know there is a standard SAP intercompany stock transfer setup in MM.
    However, this standard SAP setup in MM does not create sales order as it only trigger delivery order...
    Anywhere.. Just a thought to see this is possible via user exit.
    What say you?
    thanks
    YY

  • Reg : object creation for controller and view ?

    hi friends....
    i am new to WDA and objects...
    please explain me..
    when i create the web dynpro component one interface is automatically created as IF_COMPONENTCONTROLLER for component
    IF_MAINVIEW for view
    IF_WINDOW for window
    correct me if i am wrong
    suppose if i want to reuse class, i want to create object... like wise
    if i want to reuse interfaces, i want to create object.
    but in this case..for eg (IF_COMPONENTCONTROLLER, IF_MAINVIEW ) where we are creating object...?
    no need to create object ?
    regards
    deva

    >but in this case..for eg (IF_COMPONENTCONTROLLER, IF_MAINVIEW ) where we are creating object...?
    no need to create object ?
    No you don't have instantiate any of the objects.  Think of Web Dynpro as a modeling layer implemented in ABAP Objects, but sitting on top of the Object Oriented constructs.  You still have some of the benfiits of OO - like event registration, inheritance, methods, etc - but a lot of the OO setup is done and maintained by the framework for you.  So although each section of Web Dynpro - the component, the controllers, contexts, views, etc - are all technically ABAP Object instances, you don't have to manage the objects directly.

  • Reg: Table creation for generic source

    Hai,
    I tried to create generic data source using a table that I created. But when I tried to enter entries into the table using se16 transaction, one field is not at all coming.
    I didnt understand why this field is not coming. I checked the enhancement category, but that is allowing too.. I changed the position of that field in the table and tried. But still its not coming in se16 create entries..
    What can be the problem. When we check the table in se12, that field we able to see.. When we check through se16 also its available. Only when we want to make entries its not coming..
    Can someone help me to resolve this issue..

    Hi,
    Yes I am able to see the filed in the data source also.
    I want to do flat file loading. So I am using LSMW recording for the same. So in se16 i need to create dummy entries. But as this filed is not coming, I cant populate.
    When i tried outside lsmw also in SE16 that filed is not there.

  • Reg: Document Creation in CV01N

    HI,
    I careted a document thru CV01N TX.... WITH A STORAGE CATOGERY ..AND THE DOC IS SUCCESSFULLY CREATED .
    say doc 1001 is created .
    Now  I want ot know the TABLE-FIELDNAME ...where the storage cat is stored  for this doc 1001..that is  IF i give doc no as 1001..it should give me storage category .
    and  another question is : A doc is in FINAL stautus. Now I want to change the storage catogery ..can we do it,,,, if yes how???
    regards
    Arjun

    check out the file first.
    Run CV02N , open the file you want to check-in in different storage category.
    Click on the file. Then click on "Change original" button.
    R/3 System will save file on your local system.
    Now you again use CV02N, you can notice that file is checked out (Open Lock). Right click on the file, chose "Check In As", then select the storage category of your choice from the pop-up.
    Thanks

  • Reg: emplate creation in SAP server

    Dear Experts,
    I need to create a ms word document template in an SAP R/3 server folder.
    May I know which transaction i should use for thjat and what are the transaparent tables in which the information about the file is stored.
    This is urgent . Please throw me some light on this.
    Thanks in advance.
    With Regards
    Ravishankar Vembu.

    there are many options.
    1. you can store them using transaction SMW0
    2. you can store them in BDS - txn OAOR
    3. you could also store them in your own ztable
    do you want to use this template in your custom programs?

  • REG : DC Creation in NWDI

    Hi All,
    I am facing one problem in craeting dcs in nwdi.
    I have created new dc in inactive dc tab but my dc is getting reflected in local developemnt tab.
    Also i have not marked anything like local developemnt component  while craeting DC whereas i used "sync used dcs" only.
    Can anybody suggest asap me what all is happening here.
    Regards,
    Anupama

    HI,
    for your information,
    you will find  all the DCs u created in inactive tab under local DCs also under the same SC name
    Regards,
    Satya.
    Edited by: Satya on Aug 17, 2009 1:58 PM

  • Reg:Invoice Creation in FB60

    Hi,
          I have create a invoice in FB60 with the amount above 1lakhs its creating sucessfully.The payment block automatically change to P-payment request while verifying  the invoice number in FB03.So i cant able to  clear the payment in F110 .If any configuration need to be done?
    Regards
    Sathish Kumar K.C

    Hi Ragha,
                      I simply uncheck the not changeable for Payments Request.Now its working fine.But i need to know why the payment block changing to p if invoice amount is greater than 1 lakh? Thanks Ragha.
    Regards
    Sathish Kumar K.c
    Edited by: Sathish Kumar K.C on Jul 3, 2009 2:43 PM

Maybe you are looking for