Reg posting of inspstock

Dear Gajesh and all,
Please advice regarding while doing usage decision in insplot stock , we want to post some material to control sample and chane the text of unrestricted to Available stock, how to do this
Please give step by step
Thanks in advance
regards
venkat.v

Dear Venkat
1) you can post the control to sample to SAMPLE USAGE tab in the inspection lot stock tab. If the quantity to be posted is always equal to the sample taken for testing , then actualy automatic posting to SAMPLE USAGE is also possible.
You willhave to maintain the cost center either the UD level or at the plant level for the same
2) changing the text is not possible. This a part of SAP and in entire landscape you will come across this term only. this is a very minor change management which the client has to cope with
Regards
Gajesh

Similar Messages

Reg: Posting of payroll for new employee joined

Dear Expert,
We have hired a new employee, maintained all infotypes including 0009 also. We are facing problem once the payroll have run. his RT table have got updated, cluster result have been updated. but when we go for posting purpose, that employee doesn't gets selected for posting run also. the system is not at all selecting the employee for any document creation.
with regards
sumoy maity

HI,
Tcode - PC00_M99_CIPE
Enter Employee Code
Select the tick - display Log
Do live run
This will show you the run number if the employee data has already been selected for actual run.
You can use this Run number for further processing.
Hope this helps.
Param.

Reg.Post dated checks deposit

Hi all,
I am using SAP B1 2005B version PL40.In this version i am unable to found Post dated check Deposit entry.But i found the same in the Help Files.
First Tell me is there Post dated check deposit Entry option available in SAP B1 2005B.If its there means how to enable it.
Thanks in Advance,
M.Badrinarain.

If you are refering to the option:
Option 1: Open post dated checks window in General Settings->Services (or)
Option 2: Post Dated Deposits functionality in GL report expanded option
Upto my awareness, the post dated cheque option is currently not available in Indian Localisation.
Recomended: Do check with your India LPE for latest information.
In case of post dated cheque you can post outgoing payment with future posting date, the journal entry will be posted in the future posting date thus not effecting the current account balance as on current date.
Note: Please check the validity of this transaction with your accountant.
Regards
Satish

Reg:Posting Error

Hi Team
I am getting error while trying to post to accounts.The error is "incorrect country grouping 40 (country grouping for run: 08)".
But the number ranges assigned to 40 grouping only and also PA and PSA ,emp and emp subgroups are also mapped with country grouping with 40 only.
Please throw some light on this to resolve.
Thanks and Regards
Kranthi G

Hi,
This error is specific to the scenarios when you payroll result belong to Molga 08 whereas posting run, you are executing is for molga 40 or vice versa.
Payroll results molga will be defined by the Payroll cluster result here (after live payroll run) whereas molga for posting will be defined by the payroll area you have entered at the selection screen.
Check if there is any mismatch.
- Praveen

Reg: Posting Document creation issue

Dear experts,
we have hired 20 employees in a month from start date 01.01.2011, with updating all the personal and payroll records. We have run the payroll for all employees, which has updated all payroll results. When we came across the posting part, among 20 employees only 19 employees gets executed and for 1 single employee the posting documtne didnt get created.
Please help us in the solving following issue.
With Regrads
Chandan Maity

Hi Chandan,
Please go to PPMOD and make sure that this employee is linked to a group via this feature (cost center vs fields are maintained)
Please also make sure that employees payroll results reside in PC_PAYRESULT t-code without errors.
Regards,
Dilek

Reg : Posting of invoice

Hi Experts,
I am working on an object to post incoming invoice for a purchase order.
Could any one of you help me in knowing what are the mandatory fields to be passed inorder to post the inovice using this BAPI ie BAPI_INCOMINGINVOICE_CREATE.
Thanks in advance.
Regards,
Ramkishore

Hi,
Check the below fields:
For ITEM :
   invoice_doc_item
   po_number .
    po_item .
    tax_code .
   item_amount .
    quantity.
    po_unit .
HEADER :
invoice_ind
doc_date
pstng_date
ref_doc_no
comp_code
currency
gross_amount
Among these few are optional.

Can any 1 help reg Post system refersh activity

Hi
can any one help me regarding post system refersh activity?
Regards,
Siva

Hi,
license the machine,run se06,check the stms config,reasign logical systems,number ranges of the transport requests,recreate fax and mailing list,check printers,ditribution models,RFC,mailing list...
Regards
Umesh

Reg : Post Goods Receipt

Hi Experts,
                   I need to fetch list of Inbound delivery number which has not been Post Goods Receipted in   VL31n ?
                   Kindly provide me logic to get the data.
Regards,
Vikram

Hi,
Select the delivery number from LIKP. Search the delivery numbers in VBFA to find out whether PGR document has been created.
Select <fields> from vbfa
where vbelv = <delivery number>
and      posnv = <delivery line item>
and      vbtyp_n = 'R'.
If the record available for above select statement, then PGR document is created for the delivery number, else PGR document
is not available for the delivery.
Regards
Vinod

Reg posting fb70

Hi,
while i am posting i am facing this problem, please let me know how to rectify.
' you may enter amount only upto this amount'.
'You are allocated to a user group of the accounting department to which the specified amount restriction applies'
regards.
venkat.

check tolerance groups using OBA4.
I think your user group assgined one tolerance group , check that tolerance amount.
If you want change the amount in OBA4.
chandra

Reg: Posting Period

Dear Guru's
I cant able to close the period 09 2010 in MMPV
Its throws an msg The specified year 2010 is not the current calendar year
                                        Message no. M3489
i will give my details
MMRV
Current period            09 2010
Previous period           08 2010
Last period in prev.year 12 2009
OMSY
7070     Sample 7070     2010     9     2010     8     2009     12
I cant able change in omsy its throws an same warning msg
The specified year 2010 is not the current calendar year
                                        Message no. M3489
if i neglect this warning it throws an error The company code 7070 can no longer be initialized
And my Fiscal year variant is V3     Apr.- March
Kindly guide me to solve this
regards
anand

Dear Smile
Issue:Its throws an msg The specified year 2010 is not the current calendar year
Message no. M3489
You have To option to rectify the error , as we can see the current period is 9 2010, so you have to close the all period till you get the curent period ( i.e 1 2011)
Sol 1: Tr. code : MMPV
from com code as :XXXX
to com code as:xxxx
peroid; 10
fiscal year: 2010
Repat the process till
period : 1
Fiscal year :2011
Sol 2: Delete the plant assingment through Comcony code in customizing
Then Tr.code: OMSY , maintain the period as 1 2011
then reassign the plant to compony code
NOTE: Solution 2 is not recomandable

Reg: POST GOODS ISSUE/Serial number.

Dear Friends,
we are facing one issue , with respect PGI.
We are producing with serial number. In MMBE i can find sales order stock , which has serial Number.
But at the time of Delivery i am getting an message Stock is not suitable for movement type.
For the same material we have done delivery many times.Why at this time i am getting this message..?
May i know the solution..?
Thanks in advance...

Check this thread
[IO231: Stock data of serial number &1 not suitable for movement|IO231: Stock data of serial number &1 not suitable for movement;
thanks
G. Lakshmipathi

Reg posting problem MMPV

hello please suggest me , that i need to open a period for september 2011. as per the client requirements, the the first period starts from april of the year. so by taking this consideration , the current period should be 06/2011 . but it is showing as 09/2011 . how to close this period and change this period to 06/2011?
please suggest immediately

Hi,
06/2011 indicating period which was already opened in system (that means september 2011 is opened in system).
But as per your query system is showing 09/2011 that means you are wrongly opened dec'2011 in system.
System should not allow you to do this ,please apply sap Note 1082841 - MMPV date check for Material Ledger.
Regards,
Sandesh Sawant

Creative Zen Stone Plus

Hi, I'm having some problems with my mp3. Both my?laptops just can't seem to recognise it though it was working fine for the past few months. It turned up as another dri've ?Removal Disk(I instead of the name of my mp3(as i've?named it). Kept on saying that i need to format the dri've in dri've I: before i can use it. Y/N.
and NOW. i cant even switch on my mp3 though the start up screen comes up but just died there and the battery is full.
so please please please, help me out

There is a chap on here by the name of Daniel_K who re-writes Soundblaster drivers, not sure if he does anything for players though!!! Check out the lastest Reg post about him on this linky http://www.theregister.co.uk/2008/04..._driver_links/
Not sure if endorsed by Creative or Daniel_K though, so stand by for flaming!!! :P
Peace, Unity, Blah JailBreak

Creative Zen Stone Plus with speaker FirmWare editi

Hi, I recently bought a Zen Stone, I'm happy with this purchase, but there are a few things that I didn't like, little things like, not showing current song number in folder, or not showing ID3 artist tag.
And I was wondering if maybe Zen firmware is open source, and it's freely alowed for user to edit it.
Have a nice day.

There is a chap on here by the name of Daniel_K who re-writes Soundblaster drivers, not sure if he does anything for players though!!! Check out the lastest Reg post about him on this linky http://www.theregister.co.uk/2008/04..._driver_links/
Not sure if endorsed by Creative or Daniel_K though, so stand by for flaming!!! :P
Peace, Unity, Blah JailBreak

Trendmicro trm connections

Hi there,
I have some ISR G2 routers and we noticed most of them are trying to connect to Trendmicro servers, I find this weird as there is no content filter configuration on the devices at all
I took one in my lab and when I first checked trm config status was "standby" after issuing trm register I see the router trying to connect every minute to a server, how do I stop this connections attempts? I dot want the routers to connect to Trendmicro
Again I see this in different ISR G2 models and different IOS versions (15.X and 12.X) so no bug there
BO1-RTR-2951#sh ip trm config
Server: trps.trendmicro.com ( Default *)
HTTPS Port: 443
HTTP Port: 80
Status: Active -> was standby
BO1-RTR-2951#sh debug
TRM:
TRM Detailed debugging is on
BO1-RTR-2951#
Jan 11 21:58:23.368: TRM: Sending Registration Request to TRPS
Jan 11 21:58:32.368: TRM: Could not send reg post req - Host name resolution failed
Jan 11 21:59:32.368: TRM: Sending Registration Request to TRPS
Jan 11 21:59:41.368: TRM: Could not send reg post req - Host name resolution failed
Jan 11 22:00:41.368: TRM: Sending Registration Request to TRPS
Jan 11 22:00:50.368: TRM: Could not send reg post req - Host name resolution failed
Jan 11 22:01:50.368: TRM: Sending Registration Request to TRPS
Jan 11 22:01:59.368: TRM: Could not send reg post req - Host name resolution failed
Thank you

Try moving to 12.4(20)T2 like me
Some issues have been corrected like object-groups for acls.
I noticed all has not been solved, but it is quite better.
On 12.4(22)T, I had memory fragmentation and overflow when I was issuing a lot of acl and object groups commands

Reg posting of inspstock

Similar Messages

Maybe you are looking for