Reg: QM - Setup - Notifications

Dear Friends
Presently i am tring to initialize setup tables for Entire QM module.
I activated all the data sources in RSA5 & LBWE
I initilaized "Setup BW Structures for Quality Management" for all (Notifications(Q0), Inspection Lot(QV), Inspection Results(QE)) using transaction code OLIQBW.
Except Notifications(Q0), the remaining Two succesfully initialized with data when checking with RSA3.
I Know,for Notifications setup will initialized using tables QMEL, QMFE, QMMA, QMUR, QMSM
But when i seen in SE11,QMEL alone had lots of data and QMFE had only two data and QMUR had only one data.
The other tables (QMMA, QMSM) doesnot have any data.
I am little bit confused, Whether this is the reasion for setup doesnot have any data.
Can anybody throw some lights to me...
Points will be awarded for the right answers.
Regards
Raju Saravanan

Hi M. A.,
regarding your problem please refer:
Note 667544 - Reconstruction for notifications returns no data:
Summary
Symptom
The reconstruction for notifications (quality/maintenance/service notifications) does not return any data for the BW extraction or in the relevant QMIS info structures. However, the relevant notifications do exist in the system.
Other terms
2LIS_05_Q0NOTIF, 2LIS_17_I0NOTIF, 2LIS_18_I0NOTIF, MC05Q00NTF, MC17I00NTF, MC18I00NTF, OLIQBW, OLIIBW, OLISBW, reconstruction, RMCQNEBW, RMCINEBW, RMCSNEBW.
Reason and Prerequisites
When you used transaction SPRO to create notification types, no update group was defined for updating the statistics. The STAFO field in the TQ80 table is empty. This means 'no update' for LIS and BW.
Solution
Use the Customizing of the notification type to create the relevant update group: Transaction SPRO -> SAP Reference IMG -> ... -> Notifications -> Notification Creation -> Notification Type -> Define Notification Type
probably it will solve your problem.
if it help you please asgn points.
thanks and regards
Jitendra

Similar Messages

HT201342 @icloud email setup notification - When?

I still haven't received my @icloud email account setup notification. Have others been notified, and is there a way to prod apple to get this done before the open ended "few weeks" advertised to get this done? Its been 4 weeks since IOs6 was released. I wouldn't care other than I am trying to dump my existing email account and want to use my @icloud account.

I haven't heard of anyone having recieved the notification email. However, some people (including me) have found their @icloud.com address is working for both incoming and outgoing email despite not having been notified.
Try yours.

Access to Setup- Notification Methods without any Pack?

Hello,
I try to configure E-Mail notification in EM GC 10.2.0.4, but it is unaccessible after deactivating all purchasable packs.
("Notification Methods" under Tab "Setup" is deactivated).
Do I need to buy a Management Pack for configure and use an E-Mail notification?
Thanks!

ok, I need management pack...
But one is strange - why I get E-Mail for metric "Audited User" == SYS from metric category "User Audit",
but dont get any E-Mail for metrics from "Dump Area" category?
I would have expected that in both cases no email is sent ...

How to setup Notifications from iCloud in Lion ??

How do I get Notifications from iCloud into Lion? There seems to be no option for it.
From my iPad (IOS 5) I have selected iCloud for Notifications.
Whats the step for Lion ?
Thanks for your help!

Apple does not "hear" here.   This is a user to user forum.   Call Apple Support by phone if you want to communicate with them, or post to http://www.apple.com/feedback/ if you just want them to know what you think about certain products, or sign up for a free online developer account http://developer.apple.com/ and submit bug reports to http://bugreporter.apple.com/ if you have a detailed reproducible bug with the operating system.
Have you run the hardware test that came with the Mac? See this link.
If you have a brand new Mac, it likely can't be downgraded to Snow Leopard. See what I have to say on the Snow Leopard tip at its bottom. If it is over 2 weeks old, you are beyond most store's return/exchange policy, but you should check with the store you bought at, if it is withing that range.    If it is outside that range, but less than a year old, you can buy AppleCare, for both hardware and software coverage within 3 years of date of purchase for anything that is not an accident or user caused, to deal with Apple hardware and software. Otherwise it is first 90 days for software and phone, and first year for hardware as far as free coverage.
Define "crash?" What do you see happen on screen? Is there a four language screen saying you must restart your machine? Do you just see a spinning cursor that is rainbow colored? Have you tried the command-option-escape if it is the spinning cursor to see if you can force quit the application?    Do you see text with black background come across your screen?   Or do you just see applications quit on their own and it says: "this application has unexpectedly quit, other applications are not affected, report to Apple?"

How to setup notifications when workflow fails ?

Hi all,
new to this, so please help.
I want to receive notifications when a workflow fails for whatever reason.
I am using R12 (12.0.4) on linux.
Is there a way to configure this through OAM perhaps.
Many thanks in advance.

Hi;
Please check and see its helpful for your issue
Oracle Alert and WF mailer
Re: Oracle Alert and WF mailer
plz help me...!!!! Workflow Notification Mailer
Re: EBS work flow
Regard
Helios

Reg : Jive Forums Notification mail

Hi Experts,
We are in the process of configuring Jive forums in Portal.
I am facing the following challenges,
1.How to sending an email to group of users of a forum category on creation of a new thread (Notification).And where to configure the same.
2.Configuring the periodic moderation mail to the user based on the threads he created in a particular forum he is moderating.
Please request your help in addressing problems.
Thanks,
Regards,
Rudradev

Hi
thanks for your answers but that do not help...
The users are watching the tread and all of our users have the right mail adress in the profile.
i think i forgot some configurations?! Did i have to change something in the Visual Admin or so?
As i told.. i only changed the 2 configuration steps as you can see in the first post.
Regards
Bjoern

Reg:Process Order Notification

Hi Experts,
I have a clarification that while doing process order,after usage decision a notification will be automatically generated, if in the usage decision the user selected rework, then after activating it it should go to production order screen where they will create a production order after this flow, so i just want to display production order screen when they select rework in usage decision, i just want as in the case of production order where we will get production order screen when we give rework in conformation.
could you please say how to achieve this scenario?

Dear Suresh
The same requirement was recently discussed. Please check the below link
Link: [Re: Create a production order from quality notification]
Regards
Gajesh

Reg:Process Order Notification in PP

Hi Experts,
I have a clarification that while doing process order,after usage decision a notification will be automatically generated, if in the usage decision the user selected rework, then after activating it it should go to production order screen where they will create a production order after this flow, so i just want to display production order screen when they select rework in usage decision, i just want as in the case of production order where we will get production order screen when we give rework in conformation.
could you please say how to achieve this scenario?
i don't want to create production order at this time i just want the initial screen could you please say is there any function module we can assign or any user-exits available?

Hi PBS,
i just want while doing the process itself am not doing any programs it should by standard flow.
Let me explain my scenario while doing process order, in the usage decision flow i will create an action box called create process order when i click i just want to copy the rework material and its type like that and goes to CORO(Create Process Order Screen)
how can i acheive this?
Edited by: suresh suresh on Jul 13, 2009 2:07 PM

Reg: PO release notification needs to send to the PR Creater with PO num

HI Gurus,
Iam new to workfow. I have one senario in workflow.
Requirement: when ever PO release notification needs to send to the PR Creater with PO number and corresponding PR number.
Please guide how to do this .
My questions :
1.How can we can get the PR Creater user id to send notification mail
Thanks & Regards
Ramesh

Hi Ramesh ,
Which workflow you are using for PO . If it is the standard one , there is a rule used in the worklfow called 20000027.
In this there is an USer exit . In this exit , you can write your code for sending the workitem to the PR creator.
If you are using a custom workflow for this , then create a new rule and in that write the code for fetching the PR Creator and assign the user ro the actor tab. Incluse this rule in ur task .
This will solve your problem.

Reg :send mail notification

Hi all
i have bit new scenario with me can any one please guide me how to come out of this issue .
In the manpower requisition process on the portal, we need to make the
following change:
- Add a notification mail to Head HR whenever there is new requisition
that is approved by BU head and the subsequent actions made to the
requisition
- Report to be generated on a periodic basis on the open positions and
the status to the Head HR .
Thanks & Regards
Deepika
Edited by: deepika_indian on Jul 14, 2011 9:13 AM
Edited by: deepika_indian on Jul 14, 2011 9:40 AM

Hi Deepika,
- Add a notification mail to Head HR whenever there is new requisition
that is approved by BU head and the subsequent actions made to the
requisition.
--->>>> You can achieve this from the E-recruitment Workflow,
ask your workflow team ,they will help you in this.
- Report to be generated on a periodic basis on the open positions and
the status to the Head HR .
------->>> This you can not do from E-recruitment package you will have to go to
the Custom Development.
If you have implemented MSS then there we have such kinds of reports.
Regards,
Piyush

Reg Background Job Notifications

Hi,
I wanna add a user email id for background job failure notifications. How do I do that.
Thanks
NM

Hi,
You can create a Custom program, which will pick the Jobs which have failed and then send the information through EMAIL.
Check the following link.
http://jplamontre.free.fr/SAP/Send%20background%20job%20failure%20alerts%20by%20email.htm
Also go through this link. It might be useful
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/97d2e8b3-0b01-0010-b787-b8ce558a51c2
Regards,
Aj
Reward points if useful
Message was edited by:
Abhishek Jolly

Reg: DRP Setup.

Hi All,
What is the exact difference between 'Demand Schedule Items' and All Planned Items' in the DRP setup.
Regards
Ramesh

Hi Sandeep,
We have brand new part in oracle and it has no demand.
1.Create Sales order for Part1
2.Run the MDS
3.Run the DRP planned items = 'Demand Schedule Items'
4.Release the Requisition (Buy item)/Wip Job(Make Item)
5.Cancel the Sale order for Part1.
6.Rerun the MDS
7. Re-run the DRP planned items = 'Demand Schedule Items'
DRP is recommending the cancel message for part1.
Business needs justification .. why DRP is considering the part don't have demand .. is it a oracle standard functionality ..if so how DRP working ..
Regards
Ramesh

Reg:Configuration&Setup guide

Hi,
In our troupe we have implemented one Application (Java/ Oracle) for clients.
And we need to prepare configuration/setup guide for this application
So What information i need to mention in that guide.
could you please help me in this..

Rajakumar,
There are almost an infinite number of ways to configure IM, depending on the business processes your client intends to implement.
Start with SAP Best practices config guide for [Materials Management|http://help.sap.com/bp_bl603/BBLibrary/Documentation/104_BB_ConfigGuide_EN_IN.doc].
Other BP guides at [Best Practices (India)|http://help.sap.com/bp_bl603/BBLibrary/Content_Library_BL_EN_IN.htm]
Rgds,
DB49

Reg ADS setup

Hi Experts,
We have a requirement of setting up ADS in our landscape.Iam a Basis Consultant..For that I have dowloaded the master guide from SDN.. SAP Interactive Forms by Adobe..Adobe Document Services..For SAP NetWeaver 7.0...(Support Package SPS 13) and In that note I found that ADS can be configured using (correct me if I am wrong)
1) SAP NetWeaver Developer Studio in the Web Dynpro section
2) ABAP Workbench in the Form Builder section (transaction SFP)
could you pls basically explain what is the difference between configuring ADS with 1 and 2..will there be any difference in configuration from Basis using webdynpro and ABAP workbench
From Basis configuration what I could see is that creating RFC's, from both ABAP and Java and activating SICF services and testing...etc would be enough for ADS configuration
Pls let me know if there is any other extra configuration other that this
appreciate your help
Thanks,
Ravi

Hi
I am not a basis consultant. But these were some (most) of the basis tasks that were listed when we deployed adobe forms. Hope this helps you-
Server Side: Adobe document services component (Configuration for web service, credentials, and certificates will follow). IWe had the Portals, Web Dynpro runtime on the same J2EE engine, so we included Adobe service on the same engine as well
Developer Machines: Live Cycle Designer (It comes with standard SAP GUI Installation, like as Bex installation). [Available on servicemarket place]
SFP is the transaction that your developer will use to create the forms.
Cheers, Liz

Reg: special setup for plant

hi Guru,
i would like to know the special set up for plant.
what are the things has to be made for this.
please give me the details.
thanks.
siva

Dear,
How to Configure a New Plant in SAP?
Plant 0001 is the SAP default provide for your reference.
OX14 - Define Valuation Area (Tick one only- Once your system go live, no more changes)
Most company take the SAP recommended choice - Value Material Stock at Plant level
Value Material Stock at Plant or Company Level
If you valuate material stocks at plant level, the plant is the valuation area.
If you valuate material stocks at company code level, the company code is the valuation area.
The decision you make applies to the whole client.
OX10 - Create / Change / View Plants
OVXB - Create / Change / View Division
OX18 - Assign Plant to company code
e.g. 0001 - 0001 - All Plants
Px1 - Plant Px1
Px2 - Plant Px2
OX19 - Assignment of company code to the Controlling Area
OB38 - Assign company code to Credit Control Area
OMJ7 - Assign business area to Plant/Valuation area and division
e.g. Plant Px1 - Business Area Bx1
Bx2
Assign Valuation area to the Business Area
.e.g. Valuation area Vx1 - Business Area Bx1
Business Area Bx2
OMS0 - Assign Factory Calendar to the Plant and Business Area
The plant plays an important role in the following areas:
Material Valuation - If the valuation level is the plant, the material stocks are valuated at plant level. Each plant can have its own material prices and account determination.
Inventory Management - The material stocks are managed within a plant.
MRP - Material requirements are planned for each plant. Each plant has its own MRP data. Analyses for materials planning can be made across plants.
Production - Each plant having they own production/planning.
Costing - In costing, valuation prices are defined only within a plant.
Plant Maintenance - If a plant performs plant maintenance planning tasks, it is defined as a maintenance planning plant. A maintenance planning plant can also carry out planning tasks for other plants (maintenance plants).
If you want to use the application PP (production planning) or product costing and job-order costing, you must set valuation at plant level.
The valuation level that you choose affects
the maintenance of material master records
the G/L accounts in which material stocks are managed
the G/L accounts to which transactions are posted in Materials Management
Effect on the maintenance of material master records:
Depending on the valuation level chosen,
you maintain accounting data in the material master record for each plant or for each company code
you define a valuation price for the material in each plant or in each company code
Effect on G/L accounts:
If material stocks are valuated at company code level, all plant stocks of a material are managed in a joint stock account for each company code.
If material stocks are valuated at plant level, you can manage the material stocks for each plant in different accounts. For each plant, you can define a separate determination.
If several plants are to use account determination, you can group these plants in "Valuation and Account Assignment" Customizing.
For step by step with screenshots have a look at:
http://www.sapstudymaterials.com/2007/12/mm-configuration-define-plant.html
Regards,
Syed Hussain.

Reg: QM - Setup - Notifications

Similar Messages

Maybe you are looking for