Reg: "Reason for ordering" field in Scheduling Agreement.

Hi guys,
I am not getting the field "Reason for Ordering" in Scheduling Agreement.(ECC 6.0).
I am getting the same field in PO in "Retail" tab.
Any body can help me in this aspect.
Kannan

Hi,
This field is not available for Scheduling Agreement. It is only available for Purchase Order.
Even you will not get this in Field selection also.

Similar Messages

  • Need to disable availability check while changing 'Reason For Order' Field in Retail Tab

    While change of STO (Me22n) I want the availability check to be disabled when a change to 'Reason for Oder' is made in the Retail Tab in the item detail.
    Let me know if there is any BADI/ User exit or enhancement available where i can do this customization.

    Hi Reddy,
    Try Transaction Variant, you can customize the screen using this tool.
    Basically, you customize the screen (hide, make it required, visible etc) then
    save it as screen variant and define a new transaction code to it.
    So for your user, just give them this new transaction code (instead of SAP standard).
    Detail about transaction variant can be checked on :
    http://help.sap.com/saphelp_crm50/helpdata/en/7d/f63a0a015111d396480000e82de14a/frameset.htm
    Hope this helps,
    Gun.

  • Is it possible to create a Purchase order wrt a Scheduling agreement?

    Is it possible to create a Purchase order wrt a Scheduling agreement?

    Hi,
    It is not possible to create PO wrt a Scheduling Agreement. Po is basically a formal instruction given to the supplier by the purchasing dept. It is non-binding. Delivery of the goods is not mandatory for a PO. However, in the case of SA, we create SA
    and maintain SA Schedule lines (ME38) with reference to SA. The agreement created with vendor is binding and fixed.
    Hope it clarifies.
    Regards,
    Bijoy Kumar S.P.

  • How can I disable the Reason for Rejection field in VA02 line items

    Hi,
      I dont want the users to be able to change the reason for rejection field in the sales order line items. Can someone please suggest a tried and tested way of doing this
    Thanks for reading.

    Set up an auth object for the field.  In userexit field modification check the auth object and set the field to be grayed out if they don't have authority.  Users can then not change the value of the field  Sample code
    IF screen-name = 'VBAP-ABGRU'.
           AUTHORITY-CHECK OBJECT 'Z_BLK_REAS'
                   ID 'ABGRU' DUMMY.
          IF sy-subrc EQ 0.
            screen-input = 1.
          ELSE.
            screen-input = 0.
          ENDIF.
      ENDIF.

  • Message ME644 Reason for Ordering (BSGRU) in BAPI_PO_CHANGE

    I have a requirement to change the Reason for Order (EKPO-BSGRU) through BAPI_PO_CHANGE. I have populated neccessary input but the BAPI returns an Information message saying
    'Change Reason for Ord. could not be effected ' Type I; ID ME; Number 664.
    This seems to be a common problem I have seen several notes accross older versions that suggest applying program changes. We are using ECC6.0 any idea if there is a note to be applied?
    Thanks for your time.
    Edited by: Cyril Alex on Apr 8, 2009 10:59 PM

    Hi Alex ,
      Have you got the solution of this problem? Please share the solution b'coz I also have the same issue.
    Thanks

  • QA32 or QA11 - reason for movement field enable to QA32 ,inspection screen

    Hi friends,
    while doing goods receipt MIGO 101 quality stock. material document posted.
    i added field(Reason for movement ) for 101 mov type.
    When i want try at QA32 for quality to blocked stock i need to enter reason for blocked stock like pending or waiting for approval.
    here system not appeare reason for movement field in QA32 screen.
    how to enable reason for movement at QA32 inspection stock screen.
    Edited by: sivasankar cherukuri on Jul 7, 2010 11:53 AM

    Issue closed. my self

  • Function module for mass changes in Scheduling agreements in 4.7

    Dear All,
    Can any one tell me the function module for mass changes in Scheduling agreements in 4.7
    Regards
    MSR

    closing question

  • ME083 :"Enter Reason for ordering, customer " , "Enter Requester , Customer"

    While creating STO , getting warning message "ME083 :Enter Reason for ordering, customer" and "ME083 :Enter requester , Customer". How to remove this warning message ? Checked SPRO-MM-Purchasing-Environment Data-Define attributes of system messages , ME083 is not configured . This message is only coming in Quality system and Not in development. In both systems , user attributes are same.

    this looks pretty much like own validations that use a standard message number to communicate with the user.
    Please check your system for developments.
    I could understand a message like Enter requester
    but "Enter requester , Customer" is not something that I have already seen in standard SAP.

  • Rounding quantity field in scheduling agreement not considered in JITK

    Hello ALL,
    I would like to consult to you a scenario I am facing when it comes to creating a scheduling agreement (VA31) and maintaining a Rounding Quantity (field ABLFZ) in it.
    When using the standard LZ type scheduling agremeent, the Rounding quantity is considered when creating a delivery in VL10.
    However, when using the LZJ type of scheduling agreement, the Rounding quantity is NOT considered when creating a delivery in JITK.
    Can you please tell me what causes the case in LZJ scheduling agreement?
    Thank you all in advance.

    Hi,
    This field is not available for Scheduling Agreement. It is only available for Purchase Order.
    Even you will not get this in Field selection also.

  • Updation field in Scheduling Agreement

    Hi All,
    Could you please tell me how the fields (Cml. iss. qty,Cml.dlv.qty,CmlQtyReceived and CmlQtyInTransit ) are updated in the scheduling .
    as per the below screen , since there is no open quantity  for delivery creation.
    Thanks
    Radhika

    Hi,
    This field is not available for Scheduling Agreement. It is only available for Purchase Order.
    Even you will not get this in Field selection also.

  • IDOC: MM purchase order to SD scheduling agreement

    Dear experts,
    Is below scenario technically feasible?
    - Purchase order created in customer system, and sent to vendor system via IDOC
    - Scheduling Agreement created in vendor system against the received IDOC
    - Goods issue posted for delivery schedule of Scheduling Agreement, and sent to customer system via IDOC as Shipping Notification
    - Inbound Delivery created for purchase order in customer system against the received IDOC.
    - Billing created in vendor system and sent to customer system via IDOC
    - Invoice verification created in customer system against the received IDOC.
    The scenario is obviously feasible between Purchase Order-Sales Order, but I'm not sure whether it will work with Purchase Order- SD Scheduling Agreement or not. According to SAP Help, it seems that only MM Scheduling Agreement can work SD Scheduling Agreement.
    Thanks a lot,
    Duc.

    Hello Indu,
    I created two partner profiles but still receive that message above:
    Partner No: 999999
    Partner Type: LI
    Outbound parameters: ORDERS
    Outbound Options
    Message type: ORDERS
    Receiver port: A0000000006
    Pack. size: 1
    Basic type: ORDERS05
    Message Control
    Application: EF
    Message type: Z40B
    Process code: ME10
    Partner No: XXXCLNT100
    Partner Type: LS
    Inbound parameters: ORDERS
    Inbound Options
    Message type: ORDERS
    Process code: ORDE
    Kind Regards,
    Florian

  • Query about Leaving date,Reason for leaving fields in R3 report of HR Modul

    Hi Experts,
              I have a report in R3 for HR. In the report i am getting fields like leaving date,reason for leaving .
    When I  clicked F1 on the leaving date and reason  i came to know the field name as FIREDATE and MGTXT...
    I checked in DD03L table with these field name and found no related tables for that.....
    but i found some structures only.........
    In order to create a generic datasource with these fields included then how data will get for these fields....
    But i find no relevant tables regarding these fields.....in the report of r3 when checked f1
    Text
    Leaving date
    Definition
    Date, on which an employee leaves the company.
    Dependencies
    The following infotypes are taken into account when the value is created:
    P0000 - Actions
    P0001 - Organizational Assignment
    But the above P0000 ,P0001 are structures .... how can the leave date get populated in the generic datasource.which i may have to create ?
    Thanks
    Vamsi

    The easiest way to accomplish that would be to add some logic in a custom controller (i.e some java code). Which is a little more complex than regular personalizations.

  • Third party order processing with Scheduling agreements

    Gurus,
    I have a situation here, i am working with a automobile industry and customer sends us EDI 830's (FSD and JIT schedules). we are using scheduling agreements (Doc type - LZ) to process those schedules. I have couple of parts that we dont manufacture and we ask our vendors to ship it direct to customer. i am trying to set up a third party order processing for this sceanario but system is giving me message that i cant use scheduling agreements. i tested with sales order and it worked fine with that. Is there any way to figure out solution with scheduling agreements. Any help will be appriciated.
    Aman

    Hi Aman,
    Scheduling agreements with delivery schedules are not supporte in third-party order processing.
    Baskar

  • How to make a mass change for incoterms of a scheduling agreement at item level.

    Hi SAP Guru,
    There are many wrongly assigned incoterms in the scheduling agreement at item level by a user exit which was implemented recently in production. May i know if there is any way that we can revert those changes back to the original incoterms via mass change? I've tried to search over the internet and it seems like there is no posting about this issue before. Please help urgently. Thanks in advance.
    Regards,
    Shawn

    You can use the following sample to develop your usecase.
    Here, we would show menu items only for the nodes at level 3.
    You can also download the entire sample based on POJO at
    http://adfsampleapplications.googlecode.com/svn/trunk/TreeSampleApplication.zip
    The code is self explanatory.
    Let know, if you have any specific questions.
    <af:form id="f1">
    <af:treeTable value="#{bindings.continents.treeModel}" var="node"
    selectionListener="#{bindings.continents.treeModel.makeCurrent}"
    rowSelection="single" id="tt1" columnStretching="last">
    <f:facet name="nodeStamp">
    <af:column id="c1">
    <af:outputText value="#{node}" id="ot2"/>
    </af:column>
    </f:facet>
    <f:facet name="pathStamp">
    <af:outputText value="#{node}" id="ot1"/>
    </f:facet>
    *<f:facet name="contextMenu">*
    *<af:popup id="p1" contentDelivery="lazyUncached">*
    *<af:setPropertyListener from="#{bindings.continents.treeModel.depth}"*
    *to="#{pageFlowScope.CurrentDepth}"*
    *type="popupFetch"/>*
    *<af:menu text="menu 1" id="m2">*
    *<af:commandMenuItem text="View Districts" id="cmi1"*
    *visible="#{pageFlowScope.CurrentDepth == 2 ? true : false}"/>*
    *<af:commandMenuItem text="View Attractions" id="cmi2"*
    *visible="#{pageFlowScope.CurrentDepth == 2 ? true : false}"/>*
    *</af:menu>*
    *</af:popup>*
    *</f:facet>*
    </af:treeTable>
    </af:form>
    Thanks,
    Navaneeth

  • BADI:to create automatic Sales order(va01) from Scheduling Agreement(ME31L)

    Gurus,
    I want to create SO after Scheduling agreement creation.
    I am trying to do it using BADI: ME_PURCHDOC_POSTED method Posted.
    I've implemented it, and it is getting called, I am trying to create SO using SO create BAPI in the BADI.
    though the same code of SO creation with schedule line Through BAPI working fine with reports, its not able to create SO with schedule line when i use it in BADI.
    Point rewarded for any help.
    Rgs
    Ashok.
    Edited by: Ashok Gupta on Mar 30, 2008 5:20 PM

    i've done it.

Maybe you are looking for