REG: Receiver Determination

Hi All,
I have a requirement , where i need to do receiver determination with a value present in the target structure. Can anyone suggest me how this can be achieved.
Thanks in advance,
Siva.

Well Shiva,
As per me, there is no need to do Source1Target1Target2.
Please try the following.
Use Enhanced Receiver Determination. (Enhanced RD is used to configure your receivers at runtime)
Apart from your scenario, create a separate MM ) and IM and use this IM in your Enhanced RD. Rest all configuration will be as it is.
In MM, put the value of your Look up values in target and then can use this target as your receiver.
For more help on Enhanced RD, take a look at the following blog.
/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16
regards,
Madan Agrawal
Edited by: Madan Agrawal on Apr 10, 2009 12:22 PM
Edited by: Madan Agrawal on Apr 10, 2009 12:22 PM

Similar Messages

Reg:Xpath in receiver determination

Hello,
My message strcture looks like below.
Record
Level1
item
field1
Level2
item
field2
Level3
item
field3
There can be multiple items for each level.
Here goes my condition.
I have to send the message to the receiver system "A" only when filed2 value is same across all items under level2 i.e. if there are three items under level2, then field2 should have the same value across the items.
Can you please let me know how do we impliment this in the reciver determination step using xpath?
Regards,
Rahul

Rahul,
Your scenario can be achieved using Enhanced Receiver Determination. Using Xpath in Receiver Determination might become complex for your condition.
Refer below links for Enhanced Receiver Determination.
http://help.sap.com/saphelp_nw04/helpdata/en/43/a5f2066340332de10000000a11466f/frameset.htm
http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/3343
Regards,
Geetha

Reg. condition based receiver Determination

Hi,
    I need to send the records to two systems based upon the value
For Ex. All the material group record letz say (1,2,3,4,5,6) Shuld go to Receiver1 and only the records which belongs to material grp shud go to Receiver2.
I am trying using Condition based Receiver Determination
   For Receiver 1 :-
              I didnot give any condition.Coz all the records have to go to Reciver1.
   For Receiver 2 :-
                 I have written the condn in the Interface determination
            i.e) Material Group = 2.
But All the records are going to these two receivers.I have tried everything.
Thanks in advance
Regards
Anandan

Anandan,
Similar situation has worked for me. Please check the condition you have mention in Interface Determination.
In the Interface determination you need to have 2 inbound interfaces. Specify the respective condition for each inbound interface.
Example: if the Response field has the value as "Success" or "Failure" the message has to go to first interface. The message has to go to second interface only if the response is "Failure". so you can provided following condition in the interface determination:
<b>Condition 1:For first inbound interface</b> (/p1:MessageType/RecordSet/Response = F) OR (/p1:MT_RESPONSE_FROM_PS_BI/RS/Response = S)
<b>Condition 2:For second inbound interface</b> (/p1:MessageType/RecordSet/Response = F)
The above condition has worked for me. Hope this would be helpful to you.
Regards,
Sridhar

Reg: Error at Receiver determination

hi friends
i have designed a scenario for JDBC to RFC and while testing that scenario at configuration part i found the error that "receiver determination is not found" i also tested with file to file scenario and found the same error . can anyone suggest how to overcome this error and what might be the error.
with regards
sharmista

Hi Dadapure sharmishta,
Have you provided any conditions in the receiver determination? In that case make it sure that the condition is getting satisfied. Also check if all the objects are activated. Check the sxi_cache for cache related issues.
Thanks and Regards,
Sanjeev.

Reg enhanced Receiver determination

Hi Guys,
            if i have to send data to 10 receivers but how many Interface Determinations i have to create
            could anyone give me about enhanced Receiver determination
Thanks

Hi Khusee,
You will have the following,
1. 1 receiver dtermination where you cna keep on adding the 10 receivers but do not specify any condition
2. create 10 different mappings - one for each receiver but the source structure in all of them would be the same only the target structure will keep on changing.
e. g suppose source structure has 100 fields ....then consider mapping 1 which is for receiver 1 ...
   here you cann mapp say 10 fields to the target structure ...in mapping 2 for reeiver 2 you can map say only next 5 fields to the target strucure so on and so forth
3. you will also have 10 interface mappings
4. 10 interface determinations where you can specify the mappiings created above.....
hope it helps

Reg:'XPATH' Expressions in Receiver Determination

Hi All,
My scenario is an IDoc type.
Structure:
ZABCD
IDOC
TEST1
FIELD1
FIELD2
TEST2
FIELD3
FIELD4
Condition:
(field1 = "500" OR field1 = "800" ) AND (field3 = "EZTU" OR field4 = "BLKB")
I am trying to achieve the above condition through own XPATH expression in Receiver determination.
Can anyone help me out in this.
Thanks in Advance,
Lavanya .B

I have just simulated your structure in XML Spy
<ZABCD>
     <IDOC>
          <TEST1>
               <FIELD1>500</FIELD1>
               <FIELD2></FIELD2>
          </TEST1>
          <TEST2>
               <FIELD3>EZTU</FIELD3>
               <FIELD4>BLKB</FIELD4>
          </TEST2>
     </IDOC>
</ZABCD>
and the XPath is /ZABCD/IDOC/TEST1[FIELD1 = '500' or FIELD1= '800' and /ZABCD/IDOC/TEST2[FIELD3 ='EZTU' or /ZABCD/IDOC/TEST2[FIELD4 = 'BLKB'
consider that thread does not show the some character, so, put a ] after 800,'EZTU' and 'BLKB' if i put it the blog consider as a link everithing between [     ]
I mean
'800']
'EZTU']
'BLKB']
refer to this link: /people/shabarish.vijayakumar/blog/2006/06/07/customise-your-xpath-expressions-in-receiver-determination
Edited by: Rodrigo Alejandro Pertierra on Sep 15, 2010 10:46 AM
Edited by: Rodrigo Alejandro Pertierra on Sep 15, 2010 10:49 AM

Enhanced receiver determination - Idoc 2 Idoc scenario

Hi,
I am trying Enhanced receiver determination - in an Idoc 2 Idoc scenario.
But when I selected Enhanced receiver determination in ID, it is asking for interface mapping.As it is an Idoc 2 Idoc scenario, I did not create any mapping objects in IR.
Is there any round about for this.
reg,

Hi,
if you are planning to send the Idoc to two systems then you do not need Enhanced Recieevr Determination.
You can add multiple Receivers In the receiver Determination under Configured Receivers and now the same idoc will be sent to 2 receivers.
Like mentioned by moorhty, Enahnced Receievr Determination allows you to dynamically determine receivers using a mapping program.! I dont think that is needed in your case
Regards
Bhavesh

Receiver determination step in the BPM and multiline container

i have made a file2file scenario where:
there is a BPM,
the BPM has a send step which contains a receive step,
a transformation that mapps the incomin message to two messages(Split-messgae case),
and then a FORK step which sends the two messges to through 2 SEND steps to the intended receiver services.
It didnt work......and i followed a blog-> /people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure ............... which suggested to have a
"receiver-determination" step in the BPM before the SEND step.... it says that this
"receiver-determination" step will put the message in a MULTILINE container..
i m confused bout this step ........ can anybody explain.....
please help

HI,
In receiver determination step selctthe multi line container element.in container editor create the one element with type as receiver and select the check box.
A Receiver Determination step returns set of receivers configured for the output abs interfaces in the directory and puts it into receiver which is a multiline container receiver element
Regards
Chilla

Regarding receiver determination problem in IDOC-XI-XML file scenario

Dear All ,
In IDOC-XI-xml file scenario , I have configured SLD , IR . But in ID , after file adapter , reciever agreement configuration when I am doing receiver determination configuration I am not able to insert mapping program in configuration overview of receiver determination as I am not getting "New Specific" option in mapping .
Can anybody suggest what could be the reason behind this .
Thanks in Advance
Prabhat

Hi PRabhat,
In RCVR determination, you need to select the party & service (as appropriate) save the obeject
then refresh the configuration overview of recr det.
then you can see the partner/service
then you can open it & add the necessary objects.
Regards
Vishnu

How to get a dynamic receiver determination based on a table an SAP PI ABAP Stack

Hello folks,
currently I get stuck dealing with a problem about the receiver determination. Let me first describe the Problem: We are using to different SAP ERP- backend system in our test enviroment. But only of this systems is marked as current "actuall" test system. Every once in a while we need to switch between these two systems and mark the other one as the actual test system.
This is the point were it get's a little bit time consuming for me: We have about 50 interfaces were I need to change the receiver from test system A to test system B or vice versa. So I thought about creating a more dynamic way to determine the actual test system:
Therefore I have created a table on the ABAP stack of our PI (7.31 double stack) with just one field that holds the current test system. Now I would like to create a dynamic receiver determination where I call the RFC-function RFC_READ_TABLE. But how can I acess a table from the grapchical mapping of the pi which is stored on the PI?
Is there mybe another fundamental way to retrieve the actuall test system within the mapping?

You can go for enhanced receiver determination, where in you can determine the receiver system using a graphical mapping.
Now in that graphical mapping, use the standard function " RFC Look up" and make a call to bapi and get the actual receiver system.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40b64ca6-b1e3-2b10-4c9b-c48234ccea35?QuickLink=index&…
Step by Step guide to Explain Enhanced Receiver Determination - Application Server Infrastructure - SCN Wiki

No receiver found in Receiver Determination

Hello Experts,
Sub: Calling integration process (which in software component1) from sender service interface_Out (which is in another software component2) in Receiver Determination Fails.
       There are two software components, S/W C1, S/W C2,
        In S/W C1,->
        Integration process (IP1)created in S/W C1, with name space NS1,
        Service interface1(abstract) SI1 with message type MT
        In S/W C2,->
        Sender service interface2 SI2(outbound) with message type MT with namespace: NS2
(MT message type, in both service interface holding the same,
used SI1 In receive step in IP1.
Interface Determination from BS2,SI2,NS2<->   IP1,SI1(No mapping).)
In Receiver Determination,
Business system BS2;
Sender Service Interface: SI2;
Name space: NS2,
In Receivers : IP1
Problem is : do not find this receiver.
I have to call this process, like this. Please help on this.
Use case is:
single Soap request is coming, many application are using the same using common Receiver determination( which in S/W C2),
Now i have to use the same receiver determination to send this message in IP1 which is in SW C1;
-> any alternative solutions for this
Thanks,
Deviprasad.

hi,
when you use Integration Process the configuration in the ID must be
Receiver Determination 1:
Sender System: XXX
Enterprice Services (outbound)
Namespaces
Target System: Integration Processes
No Mapping requiered in Interface Determination
Line:
Receiver Determination 2::
Sender System: Integration Process
Enterprice Services (Abstract)
Namespace
Target System: YYYY
No Mapping requiered in Interface Determination
Sender Agreement=1
Receiver Agreement=2
Interface Determination=2
Communication Channels=2
Take in mind that in the Interface determination you have to define as receiver structure the Service Interface (Enterprice Service in PI7.1) type Abstract. if you cant select it delete all filter in the popup qhen you have to select the Inteface in the reciver structure.
Check the Integration PRocess if you define the SI_XXX_abs in the reciver step.
check all changes in the ESR were activated
Check this out and let me know
Edited by: Rodrigo Alejandro Pertierra on Sep 3, 2010 2:42 PM

Multi Mapping using condition & Dynamic Receiver determination – Used XSLT Mapping

Dear Experts,
     I am struggling to identify an error on the Technical Routing. Firstly according to my scenario, I receive an XML file with multiple PO's and I have to split the file to 2 different target messages. and also according to the source payload I have to send the file to 2 different receivers. first receiver is ABAP Proxy to the back end system and the 2nd one is to a file location. I have used XSLT to split the message into 2 target message type and I have used a XSLT mapping for receiver determination. Does any one have any idea of what I am doing wrong.
Note: some time I will only be able to fill in on target message.
I have attached my XSLT message split mapping with this post, please let me know if you have further question.
Your help is more appreciated.
Advance Thanks,
Pradeep
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:sap="http://www.sap.com/sapxsl" version="1.0">
<xsl:variable name="vFlag"/>
<xsl:variable name="vPONUM" select="POTRACKING/Lines[1]/PONumber"/>
<xsl:template match="/">
    <ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
      <ns0:Message1>
        <ns1:MT_Tracking xmlns:ns1="http://www.findel-education.co.uk/axapta">
          <xsl:for-each select="POTRACKING/Lines">
            <sap:call-external class="ZCL_VNAP_OBJECTS" method="CHECK_PO_EXIST">
              <sap:callvalue param="IP_EBELN" select="string(PONumber)"/>
              <sap:callvariable name="vFlag" param="EP_BOLEAN" type="string"/>
            </sap:call-external>
            <xsl:if test="$vFlag = 0">
              <Lines>
                <DDate>
                  <xsl:value-of select="DespatchDate"/>
                </DDate>
                <PONumber>
                  <xsl:value-of select="PONumber"/>
                </PONumber>
                <POLine>
                  <xsl:value-of select="POLine"/>
                </POLine>
                <QTY>
                  <xsl:value-of select="Quantity"/>
                </QTY>
                <VendorMaterial>
                  <xsl:value-of select="VendorMaterialNumber"/>
                </VendorMaterial>
                <AccountRef>
                  <xsl:value-of select="AccountReference"/>
                </AccountRef>
                <ConsignNumber>
                  <xsl:value-of select="ConsignmentNumber"/>
                </ConsignNumber>
                <CarrierURL>
                  <xsl:value-of select="CarrierURL"/>
                </CarrierURL>
                <ConsignURL>
                  <xsl:value-of select="ConsignmentURL"/>
                </ConsignURL>
              </Lines>
            </xsl:if>
          </xsl:for-each>
        </ns1:MT_Tracking>
      </ns0:Message1>
      <ns0:Message2>
        <ns2:MT_Tracking xmlns:ns2="http://www.findel-education.co.uk/ecc/ax/po/ftp">
          <xsl:for-each select="POTRACKING/Lines">
            <sap:call-external class="ZCL_VNAP_OBJECTS" method="CHECK_PO_EXIST">
              <sap:callvalue param="IP_EBELN" select="string(PONumber)"/>
              <sap:callvariable name="vFlag" param="EP_BOLEAN" type="string"/>
            </sap:call-external>
            <xsl:if test="$vFlag = 1">
              <Lines>
                <DDate>
                  <xsl:value-of select="DespatchDate"/>
                </DDate>
                <PONumber>
                  <xsl:value-of select="PONumber"/>
                </PONumber>
                <POLine>
                  <xsl:value-of select="POLine"/>
                </POLine>
                <QTY>
                  <xsl:value-of select="Quantity"/>
                </QTY>
                <VendorMaterial>
                  <xsl:value-of select="VendorMaterialNumber"/>
                </VendorMaterial>
                <AccountRef>
                  <xsl:value-of select="AccountReference"/>
                </AccountRef>
                <ConsignNumber>
                  <xsl:value-of select="ConsignmentNumber"/>
                </ConsignNumber>
                <CarrierURL>
                  <xsl:value-of select="CarrierURL"/>
                </CarrierURL>
                <ConsignURL>
                  <xsl:value-of select="ConsignmentURL"/>
                </ConsignURL>
              </Lines>
            </xsl:if>
          </xsl:for-each>
        </ns2:MT_Tracking>
      </ns0:Message2>
    </ns0:Messages>
</xsl:template>
</xsl:stylesheet>

Hi Hareesh,
Please find my determination in the XSLT below, I am using enhanced receiver determination.
<xsl:transform xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:sap="http://www.sap.com/sapxsl" xmlns:p1="http://sap.com/xi/XI/System" xmlns:ns="urn:sap-com:document:sap:idoc:messages" version="1.0">
<xsl:variable name="vFlag"/>
<xsl:variable name="vAX" select="0"/>
<xsl:variable name="vSAP" select="0"/>
<xsl:variable name="vBoth" select="0"/>

<xsl:template match="/">
    <xsl:for-each select="POTRACKING/Lines">
      <sap:call-external class="ZCL_VNAP_OBJECTS" method="CHECK_PO_EXIST">
        <sap:callvalue param="IP_EBELN" select="string(PONumber)"/>
        <sap:callvariable name="vFlag" param="EP_BOLEAN" type="string"/>
      </sap:call-external>
      <xsl:choose>
        <xsl:when test="$vFlag = 0">
          
          <xsl:variable name="vAX" select="$vAX + 1"/>
        </xsl:when>
        <xsl:when test="$vFlag = 1">
          
          <xsl:variable name="vSAP" select="$vSAP + 1"/>
        </xsl:when>
      </xsl:choose>
    </xsl:for-each>
    <xsl:if test="$vSAP > 0">
      <xsl:if test="$vAX > 0">
        <xsl:variable name="vBoth" select="$vBoth + 1"/>
        <xsl:variable name="vSAP" select="0"/>
        <xsl:variable name="vAX" select="0"/>
      </xsl:if>
    </xsl:if>
    <xsl:if test="$vBoth > 0">
      <p1:Receivers>
        <Receiver>
          <Service>
            <xsl:text>BS_AXAPTA_TST</xsl:text>
          </Service>
        </Receiver>
        <Receiver>
          <Service>
            <xsl:text>BS_ECQCLNT300</xsl:text>
          </Service>
        </Receiver>
      </p1:Receivers>
    </xsl:if>
    <xsl:if test="$vAX > 0">
      <p1:Receivers>
        <Receiver>
          <Service>
            <xsl:text>BS_AXAPTA_TST</xsl:text>
          </Service>
        </Receiver>
      </p1:Receivers>
    </xsl:if>
    <xsl:if test="$vSAP > 0">
      <p1:Receivers>
        <Receiver>
          <Service>
            <xsl:text>BS_ECQCLNT300</xsl:text>
          </Service>
        </Receiver>
      </p1:Receivers>
    </xsl:if>
</xsl:template>
</xsl:transform>

File name based routing in Receiver determination

Hi experts,
I have a requirement to do receiver determination based on file names which are dynamic.To put it clearely, i will be having two files in my source File location and i need to route it based on the file name to two target systems.
The file name are like Month(changes everymonth)_TargetSys1 and month_targetSys2.
I dont need any conversions ,so i am not using any IR objects.
To pick files i kept *.txt in sender channel, and in receiver determination condition i was trying to use context object called 'Filename'.But it doesnt work asthe file name changes every month.
Is there any option to take substring from the input file name (say targetSys2 from month_targetSys2.) and put it as a condition for receiver determination.
There is not DT or structure of the incoming file , as there are no modification to be done with the content.
Regards,
Anika

you need to have the structure in case you want to route it via the xpath.
Else another option is to code the enhanced receiver determination and using a java mapping with dynamic configuration read the filename and then dynamically create the receiver determination.
http://help.sap.com/saphelp_nw04/helpdata/en/43/a5f2066340332de10000000a11466f/content.htm

How many Receiver determination in File to SOAP scenario

Hi,
I am trying a File -SOAP-File scenario, where file will be send to PI asynchronous. BPM is configured to receive the file and
call the web services and get the response (Synchronous call) .After that BPM send the file asynchronous to File via FTP .
It is basically asynchronous/ Synchronous bridge scenario.
To do this I have have configured the BPM & created 3 Communication channel . 1 sender (File) & 2 receivers ( SOAP & File)
But i got confused in Receiver determination. How many Receiver determinations do we require in this step? 2 or 3. If 3 how they will look like. I believe Interface determination is same as Receiver determination. I am suing Business System to send & recv the file.
Points will be rewarded for suitable answer.
Thanks

hi,
You require 3 receiver determinations.
one from File to BPM(XI)..
another from BPM to SOAP and other from SOAP to FILE.
This is exactly the same scenario.
RFC Scenario using BPM --Starter Kit
Thanks,
Vijaya

Receiver determination in BPM ..what is used for?

Hi everyone.
I've never used 'receiver determination' step in a BPM. I want to know what is used for.
Regards,
Inigo.

you can ref: this link to find example where a receiver determination step is used in BPM- http://help.sap.com/saphelp_nw04/helpdata/en/43/6211b11c895f6ce10000000a1553f6/content.htm
More abt RD step in BPM - http://help.sap.com/saphelp_nw04/helpdata/en/14/d5283fd0ca8443e10000000a114084/content.htm

REG: Receiver Determination

Similar Messages

Maybe you are looking for