Reg - Reference User...
Hi,
If any possible for reference user?
A is main person the same access give to B.
If any update it is automatically change to B also.
Thanks
Rajesh...
Hi ,
this function exists for assigning authorizations and its name is 'referenceuser'....
Simply create a user of type 'reference' in SU01 (usertype on logon-tab).
then assign the roles to this reference user.
Then assign this reference user to user A and user B.
Now both users A,B have the same authorizations. If you change authorizaitons of the reference user, for instance assign an additional role, both user will get this change in parallel. other settings than authorizations are not affected by this function, only authorizations assigned.
b.rgds, bernhard
Similar Messages
-
Reg: Internal Candidate Reference user-
Hi all
I did not create a reference user for internal candidate. I have run the report to generate the business partners. I have created new user id's for the internal candidates and assigned the role 'SAP_RCF_INTERNAL_CANDIDATE'.
I have created a reference user 'RCF_CAND_INT' now. I tried to run the report for the rest of the employees, and i dont see the reference user role getting assigned to the employee's existing user id.????????????
I have created reference user for external candidate and it is working fine .
Thanks
PriyaHi,
Are you on a Stand Alone Erec Instance ? I believe the reference user must be assigned by the ALE when you do the initial transfer. -
What is difference between user group and reference user group?
hi
guys,
what is difference between user group and reference user group?
your regards
p.sureshHi ,
Chk the link below for your clarifiacation.
http://help.sap.com/erp2005_ehp_03/helpdata/EN/5c/c1c81c445f11d189f00000e81ddfac/frameset.htm
Hope it helps.
Regards,
Amit
Edited by: Amit Kotwani on Sep 2, 2008 2:15 PM -
E-recruitment reference users missing
Hello,
Unable to launch E-recruitment services due to missing reference users.
The table T77RCF_ROLE has a list of reference user(listed below), all these users are not available in table usr02.
RCF_CAND_INT
RCF_MANAGER
RCF_TC
RCF_MGRASS
RCF_CAND_EXT
RCF_ADMIN
RCF_RECRUIT
RCF_DATA_TYP
RCF_REQUEST
RCF_DECISION
RCF_SUCC_PL
RCF_RES_REC
RCF_RES_SUCC
Could you please let me know how to create these users?
Thanks!Hi,
I'd like to add some additional background information here. Missing reference users usually do not prevent the eRecruiting application from being started. As long as you have the correct authoriation you will be able to start the services.
In general only the reference users for the roles internal candidate and external candidate from table T77RCF_ROLE are actually needed from a technical perspective. All others are not needed and the application will work without them. You not even have to clear them from the table.
When candidates are created by the eRec application or the candidate is switched from internal to external the authorizations are set by assigning the reference user. Technical background is the delay from assigning an authorization role directly to a user till the authorization really gets active. This delay would prevent the external candidate to work with the system after the user switch from the service user to their own session when they register for the first time. The use of reference users bypasses this issue.
Kind Regards
Roman -
Question about Web Shop, Reference User field.
Hello,
In web shop, under General Settings tab, should there be User Management tab?
I need to enter the B2CREFUSER which I created in Reference User field.
Or is that field removed now?
Thanks,
HarshaHi Harsha,
The particular field is no more available in webshop, if u want ot provide ur reference user u have to assign the refernce user in CRM Customising in the following path -
IMG-- CRM--- Ecommerce -internet user--Assign refernce user for internet user B2C
Hope this helps.
Regards
Bala -
Reference User settings for B2C sales and ICSS -CRM 5.0
Hello friends,
we have a requirement of B2C sales Webshop and ICSS scenario.
in this how to take different Reference Users for both Scenarios.
In img settings under Basic settings of E-commerce the following are available:
Reference User Authorizattion Check-
Reference User Variable :
Reference User(Internet) :
our requirement is how can we map both the scenarios with one reference User and One reference variable.
Pl could anybody through some light on this?
Thanks in advance.
Point would be rewarded.
Regards,
SriHi Vadim,
That was indeed what I was looking for.
Many thanks,
Sebastiaan. -
Please advice how do i create a reference user and associate it with a web user.
Thanks in advance
Regards,
NitinHi Joshi,
I am working on IS-U system and there is no reference user tab under su01 transaction. Anyway, I have already resolved this problem. Under su01 we have to perform the following actions to create reference user .
Click on Goto Menu -> References.
Regards
Nitin Jain -
Change documents for reference user (de-)assignment
Morning all,
At my present customers' site they have been giving authorizations by assiging a reference user to several users for some time. Is there a quick way to see which reference user was assigned to which user and for which period? Table logging on USREFUS isn't active on the system.
Thanks!
JurjenHi Jurjen,
Do you have report RSUSR100N in your release / SP?
Via report RSUSR100 (the old one) you can also find this, but only if the user type was reference (L). You then need to work out which authorizations the reference user had at that ponit in time.
Cheers,
Julius -
How to create a reference user for B2C application?
Hello,
Can somebody please tell me how to create a reference user for B2C application?
I am trying to create a new account on the B2C site. It is giving me a null pointer exception. I have not created a reference user for B2C application.
Is there any documentation available to explain the steps required for this?
Thanks,
HarshaHi Harsha,
Please lookup http://help.sap.com/saphelp_crm40sr1/helpdata/en/be/511378ab1311d4b32b0050da4cccf0/frameset.htm for more information.
Cheers,
Ashok. -
Reference Users in ERP E-Commerce - ERP E-Commerce - SAP Library
To add a comment, please log in or register on the top of this page and choose Reply. Please write your comment in English.
You can also go back to the SAP help page.For useful related information please see the following location.
“Creating a reference user in B2C for ERP scenario” http://wiki.scn.sap.com/wiki/x/zYKdD
I would also highly recommend reviewing the SAP WebChannel E-Commerce E-Marketing E-Service Wiki page. http://wiki.scn.sap.com/wiki/x/JxkB
This contains a lot of useful information and gives a good overview of WebChannel E-Commerce. -
USMM no data when execute reference user classification
We've instaled sps in our r3 landscape, and since that instalation the
transaction usmm behaves in a different way. Before inslatation when we
executed USMM->GOTO->REFERENCE USER CLASSIFICATION we can saw a list of
users now we can see nothing.
We already search notes and have implemented one (1292148) but it can't
solved our probem.
Now we don't have that screen anymore, goes immediatly to a list of
users
This is our relase in that momment:
SAP_BASIS 620 0065 SAPKB62065
SAP_ABA 620 0065 SAPKA62065
SAP_APPL 470 0031 SAPKH47031
SAP_HR 470 0088 SAPKE47088
Can you help us with this issue?
Thanks in advance for your support
Best RegardsHi ,
When you run the below option are you able to see the reference users in the system.
transaction USMM choose the User Classification option.
Choose Extended List.
Specify the name of the reference user and choose Execute.
Thanks,
Pundari -
AGR_USERS, but for users with reference user assigned
Hi...
How do I get a complete list is "Users By Role" when a large number of users only have roles via a reference user?
Table AGR_USERS does not list these roles!
/vitofavaHi,
S_BCE_68001400 (rsusr002) and select your users by the assigned reference user.(4th selection field)
b.rgds, Bernhard -
USMM - License classification via reference user
Hello all,
I am trying to group users for licensing by using a reference user rather than User Group for authorizations.
I am following the instructions in the Help section, however, I do not have the option for "Extended List" and the Reference User is not appearing in the "Ref. User" field I added when I choose "User Classification".
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/b2b8d0ca643d88e10000000a421937/frameset.htm
We do not have CUA implemented. Is that what is causing this error?
I would like to figure out a way to group users by their work area, because unfortunately this USMM report will not group users by "User Group", only "User Group for Authorizations" which does not meet our requirements.
Any help would be greatly appreciated.The documentation states that you cannot classify users by reference users?!
Reference users are actually comparable to composite roles and composite profiles in one entity, which you can assign to the user which can logon. They the user has both their own authorizations and those of the reference user.
Cheers,
Julius -
Defference between usergroup and reference user group
Hi,
Please any one tell me the defference between usergroup and reference user group.
Thanks,
hcmPlease make use of forum search.
Donnie -
I have scoured the web for days and have not been able to quite come up with exactly what I need for this. I have created an Outlook signature deployment using VBScript which sets information in an already formatted Word doc using placeholders. (Ex. [Displayname],
[Initial], [City])
All of that works as expected, but now marketing would like to have an embedded link reference some of our users personal web pages. So the link would display some kind of standard text like "Click Here". Once clicked on the user would be redirected
to the personal web page of the person who sent the email. My problem is, I have no idea how to get the hyperlink to pull in the information from Active Directory...another problem is I know only enough coding to be dangerous so I am stuck.
Here is a sample of what I am working with, I am hoping someone can point me in the right direction. Thanks!
'----- Connect to AD and get user info -----'
Set objSysInfo = CreateObject("ADSystemInfo")
Set WshShell = CreateObject("WScript.Shell")
strUser = objSysInfo.UserName
Set objUser = GetObject("LDAP://" & strUser)
strDisplayName = objUser.displayName
strFirstname = objUser.FirstName
strLastName = objUser.givenName
strInitials = objUser.initials
strName = objUser.FullName
strTitle = objUser.Title
strDescription = objUser.Description
strOffice = objUser.physicalDeliveryOfficeName
strCred = objUser.info
strPOBox = objUser.postOfficeBox
strStreet = objUser.StreetAddress
strCity = objUser.l
strPostCode = objUser.PostalCode
strPhone = objUser.TelephoneNumber
strMobile = objUser.Mobile
strFax = objUser.FacsimileTelephoneNumber
strEmail = objUser.mail
strWeb = objuser.wWWHomePage
'----- Apply any modifications to Active Directory fields -----
'Use company info page if user does not have a Linked-In account specified
if strweb = "" Then strweb = "http://www.linkedin.com/company/58654"
'----- Open Word template in read-only mode {..Open(filename,conversion,readonly)} -----
Set objWord = CreateObject("Word.Application")
Set objDoc = objWord.Documents.Open(strTemplatePath & strTemplateName,,True)
Set objEmailOptions = objWord.EmailOptions
Set objSignatureObject = objEmailOptions.EmailSignature
Set objSignatureEntries = objSignatureObject.EmailSignatureEntries
'----- Replace template text placeholders with user specific info -----
SearchAndRep "[DisplayName]", strDisplayName, objWord
SearchAndRep "[Name]", strName, objWord
SearchAndRep "[Description]", strDescription, objWord
SearchAndRep "[Title]", strTitle, objWord
SearchAndRep "[Street]", strStreet, objWord
SearchAndRep "[POBox]", strPOBox, objword
SearchAndRep "[City]", strCity, objWord
SearchAndRep "[State]", strState, objWord
SearchAndRep "[PostCode]", strPostCode, objWord
SearchAndRep "[Phone]", strPhone, objWord
SearchAndRep "[Mobile]", strMobile, objWord
SearchAndRep "[Fax]", strFax, objWord
SearchAndRep "[Email]", strEmail, objWord
'SearchAndRep "[Web]", strWeb, objWord
'----- Replace template hyperlink placeholders with user specific info -----
'SearchAndRepHyperlink "[email]", strWeb, objDoc
SearchAndRepHyperlink "[Web]", strWeb, objDoc
'----- Set signature in Outlook -----
Set objSelection = objDoc.Range()
objSignatureEntries.Add "NewCBSig", objSelection
objSignatureObject.NewMessageSignature = "NewCBSig"
'see note below if a different reply signature is desired
'objSignatureObject.ReplyMessageSignature = "Full Signature"
'----- Close signature template document -----
objDoc.Saved = TRUE
objDoc.Close
objWord.QuitCan you ask a specific question? You have posted a script and noted you need a link but there is no question.
¯\_(ツ)_/¯
Maybe you are looking for
-
Question on the engineering behind Swing
I have been using the AWT for 5 years and love it, but I'd like to have Trees and Tables, etc. My question is this: Why do applets and applications that use Swing for their UI paint v-a-r-y slowly and sometimes don't work, or don't repaint when a men
-
Static nat with dual destination
I need to configure static nat for cisco ASA 5500, here is the topology: one server (source) with ip 10.211.250.22 /28 (interface : name if dmz_virtual_account) will static nat to two destinations : 1. to Internet will translated to 202.152.19.196 (I
-
Hi, we are using the "RemoteApp and Desktop Connections" to Access our RDP-Infrastructure with Windows 7 Clients. We have a Windows Server 2012 with RD Web Access Role installed and i changed the authentication Settings on the RDWeb page to use Windo
-
Optimal Drive and Application Setup
Good day all. First off I apologize if this is the wrong section for posting this. This question is not for any one specific app but more for the best setup across the entire suite. I have been a member of the Adobe Suites for quite a few years bu
-
Please help!!!