Reg: Reports adding in sap menu

HI all
How to add reports painter reports in sap menu.?
regards
JK

use tcode SERP or se43n and use report name:
Regards
Rakesh Pawaskar

Similar Messages

  • Reg:report painter reports adding into sap menu

    HI all,
    HI all
    How to add reports painter reports in sap menu.?
    regards
    JK Rao

    Hi, Janardhan Rao & all other Readers of SAP Net work site,
        Private nodes
               Private nodes are no longer supported in the area menus and are
               not taken into account during migration. As a replacement, the
               favorites are available in the Easy Access.
        Including of own report trees in the menu structure
               In order to include your own area menus generated from the report
               trees into the displayed menu, you can either include the menus
               as enhancements in the SAP Menu or include them into the menu of
               a role. To do this, read the documentation on Transactions SE43
               and PFCG.
        Client dependency of the report trees
               If you have used different report trees for different clients,
               you can carry out the migration several times in the
               corresponding clients. As a result, you receive several
               cross-client area menus.
        Further information
               Also read the Release information BC_46_REPTREEMIG2. You find
               this information in every system under Help -> Release notes ->
               Complete list from Rel. 4.0 -> Release notes as at 4.6A,
               Component BC-FES-SEM, document "Change to area menus and report
               trees".
    If you have any query, you may reach me
    Dr. Ravi Surya Subrahmanyam, PhD Finance,
    SAP FICO Consultant,
    Answerthink (India) Limited,
    Hyderabad. AP. India
    Phone : +91 9848550024
    Email : [email protected]

  • Running Report Directly from SAP Menu

    Hi ,
    I have to know that , I have created a report and given it a transaction code . There is also a standard report which output almost the same result .
    Now I want that standard report not to be shoen in the SAP menu on the left hand side and instead of it I want My reports transaction code to be visible so that the enduser is at an ease not to remember the Transaction code to run that report .
    So how can I go for it ?
    PLease advice .
    Thanx & Regards

    Hi,
    Have you looked transaction and screen variants (SHD0) or GuiXT solution?
    For more information, please check this links.
    http://help.sap.com/saphelp_nw04/helpdata/en/7d/f639fb015111d396480000e82de14a/content.htm
    http://www.synactive.com
    http://help.sap.com/saphelp_erp2004/helpdata/en/89/91b9d8194f11d5b3a30050dae02d7c/content.htm
    http://service.sap.com/guixt
    Hope this will help.
    Regards,
    Ferry Lianto
    Please reward points if helpful.

  • Adding the sap menu

    I erased by mistake the sap menu folder - how can i add it back?
    Regards,
    Moshe

    Hi
    Can you explain how you erased? I think u met of changed the settings
    Login to sapgui
    <b>Goto menu->Extras->Settings</b>
    You will get some options
    <b>1.Display favorites at end of list
    2.Do not display menu,only display favorites.
    3.Do not display screen
    4.Display technical names</b>
    I think u have to set these settings it will help u.
    kiran kumar.v

  • Publishing a Report in the SAP Portal

    Hi,
    I am able to create a report using Web Application Designer. I am also able to publish it. Once logging into SAP BW, I can see a shortcut of my web report in the SAP Menu. When I click on this report, it redirects me to a site, opening my web browser automatically, and opening a link to my created report.
    My question is: Is there a general site wherein I can log in and access my report? I want users to access a single link and choose their reports from there; instead of them logging into SAP BW, and clicking on the shortcut to access the report
    My follow up question is: the link to my report appears to be a long link. Can I change the link to my report to make it more easier to memorize for my users?
    I am looking forward to your reply experts!
    Regards
    Ramon

    Hi,
    If u have an access to the portal u cn directly log on to the portal and there u can executer the reports which are assigned to u.
    http://help.sap.com/saphelp_nw04/helpdata/en/a3/7b583c2439e66fe10000000a114084/content.htm
    Hope this information helps u........
    Assigning Points is the way of saying Thanks in SDN
    Regards
    Ramakrishna Kamurthy

  • Crystal Report menu-item not visible on SAP menu of client

    SAP 2007A SP:00 PL:38
    Crystal Report 2008 (on start menu)
    Crystal Report 2.0.0.6
    1. Installed CR 2008 on server and it runs fine both from Start menu and from within SAP menu. SAP also shows Crystal Reports menu item and Crystal Admin.
    2. Installed Crystal Report on one of the clients and it works fine in same way.
    3. On 2nd client, SAP Crystal Runtime installed as follows: SAPCrystalSetup.exe run first, then DotNetFramework3.5  run - it resulted in "Setup error". Then run the CRRuntime_12_0_mlb.exe without errors. Then installed CR designer, On this client, Crystal Reports 2008 opens fine from Start menu. However from within SAP, it does not show Crystal Reports Admin nor the Crystal Reports menu-item.
    a) This user has "automatic" start of Crystal Reports 2.0.0.6 in Add-on Administration.
    b) However, in Add-on Manager, Crystal Report does not show at all.
    c) In Add-Remove programs, I see that Microsoft .Net Framework 3.5 SP1 exists on the client.
    d) OS is Microsoft XP.
    How could I see Crystal Administration or 'Crystal Reports' menu-item from within SAP on this client?
    Thanks, Ajay Audich

    Hi,
    1) On Add-Remove Programs on the client, I see the following:
    Crystal Reports 2008 Runtime
    Crystal Reports Basic 2008 for SAP Business One
    Microsoft.NET Framework 1
    Microsoft.NET Framework 2.0 Service Pack 2
    Microsoft.NET Framework 3.0 Service Pack 2
    Microsoft.NET Framework 3.5 SP1
    SAP Business One Crystal Reports 2.0.0.6
    2) The settings are:
    Company Preferences for Crystal Reports for SAP Business One / Version 2.0.0.6/ Default Group Automatic/ Active Yes
    User Preferences Tab-User RT-Preference is set to Default.
    On server, 'Installed Add-ons' tab shows Crystal Status as 'Connected'
    However, on the client, Add-on manager, both "Installed Add-ons" as well as "Pending Add-ons" tabs do not show Crystal Reports row at all.
    3) The user RT on the client is a super-user.
    Thanks.

  • Runnning report from Sap menu screen

    hi
    my  client is running loan management module. in some transaction when he presses a button on the sap menu ( something called cash flow) , SAP generates a table with all calculated values and stuff ( like a report ) . they want a different output format . how can i write a custom report that takes all the values from the transaction and gets executed when he presses the same button on the menu but with the format they want.
    ( they do not want to make this a standalone report)

    What sort of "report" does this transaction produce?  Is it a list display(WRITE statements) or an ALV grid.   If it is a list display, it would be possible to write a custom program, which SUBMITs the standard report, export the resulting list to memory,  import that list into memory, and pick it apart and reformat to the way you want.  This is all possible, but it should be a report program and produce a list display.
    REgards,
    RIch Heilman

  • Report template error when creating new report via SAP menu

    Hi everybody,
    we have the following error on our system:
    When trying to create a new crystal report on a SAP query, using the entry "Create new report from a SAP query" in the SAP menu an error occurs: An error ocurred while generating a new report template
    The error message appears after the SAP logon and the SAP query selection.
    I think this error is related to the report templates of Crystal...
    Is there any default template for SAP integrated queries?
    We are using Crystal Report 2008 SP2 with SAP Integration Kit.
    Thanks for any helps and comments.
    Sebastian

    The following SAP note might help you
    [https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bip/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333333363337333633343330%7D.do]
    Regards,
    Raghavednra.G

  • How can I put the reports in a report group to favorites or sap menu?

    We have a custom report in report group(gr55) and my manager wants to put them in the sap menu or in favorites...
    How can I do that?
    Anybody can help me?
    Thanks a lot!

    >
    christopher mancuyas wrote:
    > But those 14 reports does not have a t-code, they only have a report name...
    >
    > How can I insert those?
    So how your end users execute these reports?are they suppose to go in se38 and run?
    i think you can create t-code for each report and attach them into your favorites.
    Amit.

  • Missing SAP Menu in Crystal Reports

    Hi Experts,
    I've re-installed Crystal Reports 2008 V1, but I'm now missing the SAP menu which I had before.
    I've got the SAP Gui (with BW add-ons) and the integration kit is also installed since my previous installation of CR 2008 had the SAP Menu.
    I've got a feeling it's something to do with the integration kit for SAP. I've tried to re-install this too, but as soon as I click setup.exe I get an error message saying "BusinessObjects Integration Kit XI 3.1 for SAP Solution Setup has failed". I also cannot remove the currently installed inetgration kit either.
    Please help as I need to report off SAP BW data!
    Best regards,
    Andrew

    Hello,
    If you had both CR and integration kit installed; than proper way would be to remove the kit first; remove CR and reinstall CR and SAP integration kit again. It sounds like now you have a mismatch of files and possible some remnants of previous installs that is messing up any new attempts to install.
    If this is simply a client machine; i recommend to manually remove all Business objects folders in windows explorer as well as in the registry. (just be very careful you do ONLY remove the bobj stuff).
    Do these manual steps ONLY if regular uninstall of both CR and SAP integration kit do not work.
    Note that under normal circumstances to just reinstall the SAP toolbar; you should be able to run a custom install of the SAP integration kit and select only to reinstall the SAP add-on bar.
    Regards,
    Duncan

  • Adding Z-Tran in SAP Menu

    Hi All,
    How can I add a Z-Transaction in SAP Easy Access, SAP Menu -> Accounting -> Financial Accounting -> General Ledger ->Document Entry. I want to enter my Z-Transaction here. How can I do this? I am trying with se43 (S000 & S000_RW). But I cont can any one explain me clearly.
    Regards
    Rajendra

    Hi
    Use trx SE43N (not SE43):
    Insert menu S000 and press button for updating, now the system'll ask you if you want to link your modification to enhancement or not:
    it's better to assign an enhancement: create an enhancement, assign it to your modification, go to point where you want to insert your trx and insert it.
    Max

  • Adding Tcodes to SAP menu path

    How to add custom T codes and sap T codes to a particular folder in SAP menu path?
    Here I would like to display new transaction codes in below SAP menu path .  SAP menu path will be the  initial screen of SAP.
    SAP menu->Information system->finance account->general ledger-> daily.
    Here I would like to display my transaction codes under node DAILY. Please reply to me .

    Hi,
    1) Go to SE43.
    2) Give name to area menu (ZTEST) and description (SAP menu) to the area menu.
    3) Click "Add entry as subnode". In popup give "Information system" in the text.
    4) Click "Information system" and then click "Add entry as subnode" and give "finance account" as text in     the popup.(same procedure for general ledger and daily).
    5) Click "Daily" and then click "Add entry as subnode" and provide your text and tcode this time.
    Regards

  • Change in Standard SAP menu : How to catch the transaction code!

    Hello,
    I have added a menu item 'More Help' to the standard SAP menu 'Help' which should navigate to URLs for the respective transactions. Suppose i am in transaction FB03 and click the 'More Help' menu, it should navigate to the URL mentioned in a table.
    My Problem is I have created a transaction for that menu item 'zhelp' which calls a program and when i am clicking the 'more help' tab , the original value of sy-tcode which should be FB03 is replaced with the new Transaction which is used for the menu item i.e. 'zhelp'. Because of this i am not able to retrieve my value from the table corresponding to the transaction FB03.
    Is there any other system field which stores the value of transaction FB03 aftter navigating to other transaction? How should i go ahead with this? Please help!!
    Edited by: Rojalin Priyadarshiny on Sep 10, 2009 3:45 PM

    Hi,
    I really dont know in how many standard transactions you have added the More Help option.
    If you hav added only in 2  to 3 transactions then you can think on using the below Logic.
    Say if u have added in  FB01, FB02 and FB03 transaction.
    Find one exit for each transaction, in the exit EXPORT TCODE ( EX: FB01 ) to memory.
    In your Ztransaction report IMPORT the TCODE from memory.
    Now u will get FB01 after inmport statement and u can make use of this.
    If the option is added in many transactions , you have to think again in using the above logic as it involves identification of many Exits.
    Regards,
    Sravan

  • Placing the transaction in SAP Menu

    hi all,
    i have created a ztable and maintaining a transaction for that. T-code is zm93f.
    this transaction i have to place in the SAP Menu
    logistics -> Material Management->Purchasing->Purchase Order-->Messages
    Please let me know  the procedure to follow .Please help me out from this.....
    Thanks in Advance....

    Hi,
    have a look at the below threads.
    Re: sap menu folder
    Add transactions in SAP Menu
    Adding Report to SAP Menu
    Regards,
    nagaraj

  • Is it possible to open a query from sap menu favorite to excel?

    Hi all
    I have added a query in favorite . From the favorite in sap menu , i want to open the query in excel.
    Is is possible?
    Currently the query open in web.
    Please revert back if you have any idea
    Thanks
    ajay

    Hi Daya Sagar,
    You said the query saved in favorite from query designer will open in browser and the one saved from analyzer will open in bex excel. But it does not work for me. It saves as web icon and both query is opening in browser.
    Hi All,
    The different story for me is I have problem of opening the web browser by running a query from favorite or user menu because in the url I have different Client. Is there any way to fix this url problem. Any one in this thread can help me on this issue and will be awarded. Thanks.
    Raj

Maybe you are looking for