Reg: Reports Grapgh Wizard(Customizing Legend label)

Hi all,
I am working on oracle 10g reports.I am creating a report with graph.In my data model i have 2 tables both has the 2cloumns each and the names of the columns are same(like.. Series1,series2).So when i created the report. in the paper lay out when i am select the source for a field it gives Series1,series2,series3,series4.
So using these i created 2 graphs for two tables. But my issue is when i saw the output.In the legend for 1st graph is series1 and series2 but for 2nd grapg it shows series3 and series4. But actually my requirement is it has to show Series1 and series2 only as these are the actual names of the fields.
One more example, you might have different cities represented by data markers of different colors. Markers represent data on a graph. If red markers in your graph represent New York, then there is a corresponding red legend marker in the legend area, with legend text reading "New York." But i want to show this in legend as "NY" instead of "New York"....
Do any one has any idea about this legend label customization.
Thanks in advance...

Mascse,
I'm guessing you've already found the answer but try this if you haven't.
On the top line of the graph settings, you should see the dataValues. Add the same number of dataLabels and that may solve your problem.
dataValues="CAT1_num,CAT2_num,CAT3_num,CAT4_num" dataLabels="Front Desk, General, Nursing, Physician"

Similar Messages

Change report legend label waveform name

I am automatically generating a report using VBScript. Everything works OK, except the legend label for one of my waveforms. For one waveform I want to use the channel group name instead of the channel name. For the other one, I want the channel name, which is what it seems to use by default.
How do I change the waveform name displayed in the legend using VBScript?

Use the related text option for the column legend (eLegendTextCurveRelatedText), and then you can customize the name in the legend for each of the ploted curves curve.
' Add the plot
Set Plot = Report.ActiveSheet.Objects.Add(eReportObject2DAxisSystem,"Plot2d")
' Set the ithColumn of the of the legend to -> related curve text
Plot.CurveLegend.Columns(ithColumn).Type=eLegendTextCurveRelatedText
' Set the related text in each of the curves for the ithColumn
Plot.Curves2D.Item(1).RelatedLegendText(ithColumn) = "@@Data.GetChannel(CurrChnNo).Name@@"
Plot.Curves2D.Item(2).RelatedLegendText(ithColumn) = "@@Data.GetChannel(CurrChnNo).ChannelGroup.Name@@"

Reg: Reporting on Custom Objects

Hi all,
I want to know if there is any tool or workaround that we can use to report on a custom object data in siebel crm on demand.
regards,
uday.

Uday,
Custom object reporting is available as a patch after the R15 release. I do not know dates but there is an existing forum posting with the patch numbers so you can tell if your pod has had it applied or not.
regards
alex

Remove underlines in legend labels

I have a data model query
SELECT ALL T_NTR_MULTIBAR.CAT, T_NTR_MULTIBAR.NUM_CASES_LEFTBAR AS "No. of Survivors",
T_NTR_MULTIBAR.NUM_CASES_MIDDLEBAR AS "No. of Deaths", T_NTR_MULTIBAR.NUM_CASES_RIGHTBAR AS "No. of Cases"
FROM T_NTR_MULTIBAR
WHERE INSTANCE_NUM = :P_INSTANCENUM
order by ORDERS
This query is use in Oracle Report Builder 9i Bar Chart. The legend labels display as No._of_Survivors No._of_Deaths No._of_Cases. How do I remove _, so that the legend labels display as No. of Survivors No. of Deaths No. of Cases.
Thanks
Brendon

Hi,
You can change the Legend Label through Graph Wizard. There will a "Legend Tab' in the Graph Wizard, using that tab you should be able to modify the label. I think this may help you. If you need more information, have a look at the following link:
http://www.oracle.com/technology/products/reports/htdocs/faq/Graph_FAQ_with_style.html
Thanks,
Vidya Viswanathan

Problem in editing legend label of line chart

Hi,
I am using crystal 2008 and deploying reports in Java appilication.
I have a report with line chart in group header. I am using formulae for 'Show value' field. So legend shows it as @formula1
I couldnt change this is design mode, so i went to preview mode and used 'edit axis label' for each of the chart.
Now i can see proper legend labels in my crystal 2008. But when i deploy the report in java application, chart still shows @formula1 .... any idea on why my changes are not displayed in crystalviewer?
Thanks

This is tricky... and somehow you won't find it in manual.
After the change of Axis Label, right click on Chart Area. You will see new option "Apply Changes to All Charts". Choose this option and voila - You owe me a bottle

Changing legend labels in Oracle Graphics 6

Hello,
i am currently using Oracle Graphics to create barcharts for my reports. My problem is, that i want to change the label used for the shown bars via a parameter. Changing the labels of the X- and Y- axis is no problem with PL/SQL but it seems that the only way to change the legend labels is by using "AS" in the query (e.g. select a_column as LABEL from ...). I really need to change it by parameter.
thx for any help.

Post Author: jsanzone
CA Forum: Publishing
Nym,
The only way that I've been able to control the name of a label in regards to graphing is to use the Variable Editor and create a variable off of the column, for instance:
The name of the column from the database is call "Black_Catalog". so I create a variable called "The Black Catalog" and in the formula: =[Black_Catalog]
Then in the graph I replace the field that is called =[Black_Catalog] with my new field. When the legen displays it will show "The Black Catalog".

GRAPH LEGEND LABELS NEED TO BE USER MODIFIABLE

GRAPH LEGEND LABELS NEED TO BE USER MODIFIABLE FOR DYNAMIC PARAM INPUT CONTROL
I've been told on Metalink that my problem can not be resolved in Reports 9i or 10G but a Internal enhancement request 3071917 has been logged.
Is it possible to have some timescales on this limitation?

I'd suggest that the easiest approach would be to add a trigger to the table:
CREATE OR REPLACE TRIGGER trigger_name
BEFORE UPDATE OF comment_txt ON table_name
FOR EACH ROW
BEGIN
:new.last_updated_by := USER;
:new.last_update_date := SYSDATE;
END;This trigger will only fire when the COMMENT_TXT field is being updated and will set the LAST_UPDATE... values accordingly. The only downside to this approach would be if you want to store the OBI user and not the DB user. Effectively, you'd need to pass a parameter from OBI to the trigger to use instead of USER - bit more tricky...
Going back to your suggested approach, I don't think you need to worry about the RPD; the SQL that you define in the XML will bypass the RPD completely. In terms of what to use for the criteria for the report, you should be able to select the OBI user from a session variable and reference SYSDATE, SYSTIMESTAMP or the OBI equivalent to get what you need.
Edited by: BarryGoodsell on Sep 26, 2012 12:04 PM
Added code tags

Interactive report for displaying customer information

hi,
how to create an interactive report for displaying customer information based on selection smade ,and corresponding bank details.

pls check the sample code
Use the tables Kna1 and knbk to get the customer details.
***extract the data into internal table
select * from dbtab into itab.
*In the loop hide the field you want to trigger the interactive list.
loop at itab.
write: / itab-kunnr, itab-name1.
Hide itab-kunnr.
endloop.
use at line selecton to get desired output based on the condition
at line-selection.
select * fro dbab into itab where field = itab-kunnr.
awards points if help ful.

V IMP : Report for Cash Customer Bill wise details

Hi ABAP Gurus,
Any body is having the report on Cash Customer Bill wise Details (with invoice details) ? Input criteria - Company Code, Plant, Cash Customer Name(customer Name given while creating cash customer) & Date Range(Document date). I am using the tables BSEC,BKPF,VBRP,BSAD,BSID. Out put i have to get Date, Doc No, Particulars QTY UOM Material Rate and Gross amount(Opening & Pending Amount) as line items.
Please send me code on this. It's very urgent. Tomorrow is it's delivery date.
I will reward points.
My mail ID is [email protected]
Thanks and Regards,
Sundeep.

Hi,
Check the following links:
http://www.sap-img.com/sap-fi.htm
http://www.sapbrainsonline.com/TUTORIALS/FUNCTIONAL/FI_tutorial.html
Regards,
Bhaskar

IR Report "Link" Attibute Custom URL Escape : (colon) Character

<h2>I am running Apex 4.0.2 and have an interactive report page 242 with a result set.</h2>
Scenario
In the "Report Attributes" "Link" settings I want to link the report to a 'Custom URL' target to take the user from this IR Report Page 242 to page 243 to a 'Single Record Data Entry Form'
I am setting the value of the custom url target as:
f?p=&APP_ID.:243:&SESSION.::&DEBUG.:243:P243_NAME,P243_DESCRIPTION,P243_LOCATION:#SOURCE_NAME#,#DESCRIPTION#,#LOCATION#:The P243_LOCATION column, however, has a ':' colon and a '.' values in the database column itself with a value of *'jdbc:Host123.abcd'*
When the user clicks on the link the FULL location column is truncated before the ':' - OBVIOUSLY due to ':' being the paremeter separator column in apex
So, the #LOCATION# value on Page 242 IR Report containing a value of *'jdbc:Host123.abcd'* is trunced on the called page 243 as 'jdbc' only and truncated prior to the ':' value contained in the field.
Question:
HOW Can I build the above URL so that the ':' can be visible on the Page 243 form field? with the full value passed into the called page with a value of: *'jdbc:Host123.abcd'* ?
I tried the SYS.htf_esc(#LOCATION#) around the calling URL above, but doesn't work as expected.
Any advice is greatly appreciated.
VSK

Hi,
You can not escape colons but you can pass commas in the url. Enclose the item value in \item_value\ to escape the "," in the item value . For colons, I would suggest creating a hidden field in the source report with SQL REPLACE function and replace all the colons with any other character like ||. Then you can use the same replace function on the target page to match with the new item value.
Hope it helps. Thanks.
Regards,
Manish

Report as per Customer Account Assignment group or Material Account Assig

Hi,
I require report as per customer account assignment group or material account assignment group.
Can you please tell me how to fullfill this requiremetn.
I have go for ZReport or any standard report is available.
Regards,
ch.srinivas

Hi,
You could have gone for a query but unfortunately,you cannot use table TSTMT in a query so I think ZREPORT would be a better option.
Regards
Karan

Error while subscription on SSRS report that uses custom assembly

I am new to SSRS. i have created a report that uses custom assembly that runs an oracle procedure and bring back result to report. this works fine on sharepoint mode interactive report. while i subscribe the same report, i am getting below error
Request for the permission of type 'System.Data.OracleClient.OraclePermission,System.Data.OracleClient,Version=2.0.0.0,Culture=neutral,PublicKeyToken=b77a5c561934e089'failed. < ==>
at System.Security.CodeAccessSecurityEngine.Check(Objectdemand,StackCrawlMark&stackMark, BooleanisPermSet)
at System.Security.PermissionSet.Demand()
at System.Data.Common.DbConnectionOptions.DemandPermission()
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnectionouterConnection,DbConnectionFactoryconnectionFactory)
at System.Data.OracleClient.OracleConnection.Open()
i am breaking my head to find the root cause and fix for this.
i tried adding below permission on server machine.config file,
<SecurityClass Name="OraclePermission" Description="System.Data.OracleClient.OraclePermission, System.Data.OracleClient, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
<PermissionSet class="NamedPermissionSet" version="1" Unrestricted="true" Name="FullTrust" Description="Allows full access to all resources for custom assembly">
<IPermission class="OraclePermission" version="1" Unrestricted="true" Level="High" Flags="FullTrust"/>
</PermissionSet>
it doesnot work and i am getting the same error on subscription.
can anyone help me to solve this issue. this is very urgent. thanks

Can you see data for Custom object @ BEx level??
YES, then just try to re-create the same variable and Save the BW query.
Now do View - refresh Strusture @ Universe. And you can see Filter for the same, just Parse it, just whether it is OK or not.
OK -- then Export the Universe and create WebI reports, this will come as Prompt.
Hope it will helps you.
Thank You!!
Sent from iPhone

Issue in developing cross tab report with wizard in 10.1.3.2.1

Hi Gurus,
We are trying to develope group above cross tab report with wizard in BI Publisher 10.1.3.2.1 .
i am unable to achieve multiple level columns dynamically.Using cross tab wizard i can achieve single level measure column ,but not the second level column.
Output should look like this:
Country1
Region1 Region2 Region3 --(level1 column)
d1 d2 d3 d1 d2 d3 d1 d2 d3 -- (level2 column)
Row1 10 20 30 70 80 90 40 70 90 --data
Row2 21 24 54 65 23 64 64 76 87 --data
Here Regions and d1 d2 d3 may vary based on xml data.Also we have page break on country.
Haven't get any solution till now.
Also unable to achieve under line and overline on data for total row.
Need help urgently in this issue.
Thanks,
Mahesh
Edited by: user13450806 on Jan 7, 2011 12:43 AM

Hi Gurus,
I am still waiting for some one to help me in this issue.
It is very urgent for me to solve this. Did not get any help yet.
--Mahesh

AR aging report (summary by customer)

Hi Experts,
I would like to ask if how to create an aging report showing only the:
1. Customer
2. Credit Limit
3. Payment Term
4. Total AR
5. Due 0-30
6. Due 31-60
7. Due 61-90
8. Not Due
Hopefully the balance should be the same as with FBL5N. We have around 100 customers and we would like to see in one file only the summary per customer not not really the line items. Thanks.
I have consumed a lot of time searching for the answers in the forum but I cannot clearly figure out how to proceed. Which tcode do I configure this? Thanks in advance

If standard report does not suffice your requirement, then create your own.
FOR vendor USE K in transaction code instead of D.
Hello,
The following example I have given is for customers.
The only difference is in transaction codes. For customer you go to FDI1, for vendor you go to FKI1 (reports).
For Customer you go to FDI4, for vendor you go to FKI4 for forms.
Remaining all are the same.
Hello,
Go to transaction code FDI4
Select Form Type RFFRRD20 Line item analysis
Give your form name and description
Structure (Two axis) - as defaulted
Click on Create
You will have lead column
Delete the rows 2, 3 and 4
Double click on column 1
Enter the customer numbers from 1 to 999999
First column double click (A)
Slelect following values
Due date analysis 1
Days for net due date 0 to 30
Give the short name, medium name and long text for the column.
Repeat this step in next columns like 31 to 60, 61 to 90, 91 to 120 and 121 to 99999 days etc in other columns and select due date analysis 1. (B,C,D,E)
Create one more column by way of formula. To create a new column you need to double click on blue line. Put formula add all five columns you have created above. (F = ABCDE)
You prepare one more column with
Due date analysis 2 (G)
Now you prepare one more column add (F+G) = This will be total open items = over due and not due.
Now go to FDI1 and prepare a report - assign the form created in FDI4 to the report.
Characteristics you need to select are
Account Type (Select Account Type as D for customers)
Currency
Customer
Document Type
Special G/L Ind
Company Code
Change the output types and options according to your requirement.
Refer FDI2 and FDI3 for other standard reports created.
Refer FDI5 and FDI6 for other standard forms created.
Save your report and execute.
Regards,
Ravi

Report to analyze customer billings at G/L account level

We need a report to analyze customer billings (generated in FI-A/R, not SD) at G/L account level. There are couples of transactions/reports like S_ALR_87012171 that shown customer sales volumes but the figures include taxes. We need it without taxes. Are there any reports available in SAP to facilitate G/L level analysis for customer billings?
S_ALR_87012171 u2013 G/L account is not one of the available characteristics in form 0SAPFD10-03. Is it possible to add G/L account to the structure to make it an available characteristic?

Dear,
Use FBL3N, take customer reconciliation account GL and execute it in FBL3N. It will show you all billing done to customers to date alongwith their invoice and billing document number.
Regards

Reg: Reports Grapgh Wizard(Customizing Legend label)

Similar Messages

Maybe you are looking for