Reg restriction of particular order type
Dear all,
What is the procedure if we want to restrict a particular user from operating a particular process order type PI01,
Please give me step by step, what are to be maintained in roles
regards
venkat
Dear Venkat,
1)Create a role and assign the tcode.(IW32)
2) Go to Authourization tab (change mode)
3) In the Object PM
3) Select the Authourization objects
I_AUART
I_ILOA
I_VORG_ORD
4) Specify the ORDER TYPE:=PI01
Apart from this steps you should specify the org values like Co.code, plant..etc...
Generate the role and assign to that particular user.
Thanks & Regards
Gangadhar
Edited by: gangadhar hm on Mar 5, 2010 12:17 PM
Similar Messages
-
Restricting Material for particular Order type
Dear Guru's,
Is it possible to restrict particular material for particular order type in CO01.
E.g. Material A is used in CO01 for order type X
Material B is used in CO01 for order type Y
I want to restrict CO01 should not allow production order creation of material A with order type Y.
Regards
Chandan.Hy,
By the use of production scheduling profile you can set default order type for the required materials.But it doesn't restrict the other order type. During the manual order creation if user has select other order type then , there is no restriction.So as Mr. Shiva said put restriction over manual order creation, if possible.other option may be by using User Exit.
Now in your case you want to restrict materials not material type. So it is quite complicated for Abaper to write code , because the for every new material Abaper has to change code.
So there is one option by grouping perticuller materials under one production scheduler and then it is more convient for Abaper to create code for User Exit.
Pls refer below thread which may give some more inputs for your requirments.
[Ugent: How to restrict a Material Type for a Specific Process Order Type;
Regards,
Dhaval -
Bypass material D-Chain specific status check for a particular order type
Hello All,
For a material, I want to by-pass it's D-Chain specific status check for a particular order type.
Currently when you enter the that material in the order, I am getting warning: Material XYZ has status: ABC hold
I want to py-pass this warning message, how to do this? Can we configure this based on order type??
Pls. help me.
Thanks,
ShreekantHi Kapil,
Threre are some material for which D-Chain status ( MVKE-VMSTA) in the materila master are set in such a way so that deliveries can not be created. We need to bypass this restriction for couple of delivery types. One of them is the delivery type used for intracompany STO.
I am looking for some way out like user exit so that I dont need to change existing config change for those statuses.
Regards,
Subhankar -
How to exclude "Blocked for Purchase" error message in PO creation for particular Order Type
In Article master some times we used to set Site-Specific Article Status = '01'. (MARC-MMSTA)
01
Blocked for Purchase
02
Blocked for Purchase/Sale
My requirement is that when Creating PO in ME21N for a particular Order Type (Purchasing). This check need to be removed.
Now if we try creating the PO we will be getting the below error message.
Status "Blocked for Purchase" of article XXXXXX does not allow external procurement.
Is there any exit or BADI where i can put logic to remove this check.Hi ,
You can use BADI ME_PROCESS_PO_CUST or customer exist EXIT_SAPMM06E_013
Regards,
Pravin -
Payment terms not modifiable in PO for particular order type
Hi Gurus
My client wants the payment terms should not be modified while creating a PO. It should be picked from vendor master. But this requirement is for a particular order type ZIN only. I tried in SPRO but then it is affecting all the order types. Is there any user exit or solution for this.
Regards,
YuvarajHi,
STEP 1:
Spro>Materials Management>Purchasing>Purchase Order>Define Screen Layout at Document Level
Create a new " Field Selection Key" for ur doc type
(ex: Standard NB doc type the "Field Selection Key" would be "NBF", you can make a copy of it)
Just Double click on that
then click on "Terms of delivery and payment", there you can see the "Terms of payment" field.
against that field you can see three options, Reqd.entry Opt. entry Display...
Here tick the field "Display", So that You will get this field display only for the document type ZIN.
STEP 2:
Spro>Materials Management>Purchasing>Purchase Order>Define Document Types
Here Assign the newly created "Field Selection Key" against the your PO doc type ZIN -
How to identify a particular order type(PP01) is coming to APO?
How to identify a particular order type(PP01) is coming to APO? Can it be checked at CIF exits on APO side?
Hi Abhishek,
I am looking for exits at APO side only.
Thanks,
Prenith PP -
Added custom field to VA01 should be mandatory for a particular order type
Hi experts,
I have created a custom field in Additional Tab B (Screen 8459) in VA01 at the item level. Now that field should be mandatory for a particular order type. If a sales order is created with that order type then the user cannot save the sales order without putting any value to the custom field. Please can anyone suggest me how to do that?
Regards,
SURYAHi
Sap_wiz is right. It's the same that in this [post|Re: Enhancement in VA01 Additional data B tab].
Regards
Eduardo -
Block Production Order Creation for Particular Order Type
Hi Experts,
I want to disable the production order creation for a particular order type XX01 however there are some existing orders for this order type which should be processed further.
In other words my objective is to -
1. Block new Production order XX01 creation -
2. Processing of order type XX01 should be possible.
Is there standard setting available to achieve this or user exist is the only option..
Regards,Hi
You can use the user exit PPCO0006 and its function mdoule EXIT_SAPLCOZF_003 to archive that. That function module is called when the user click enter after inputting the material/plant/order type in CO01 then you just need to check the imported value CAUFVD_IMP-AUART which contains the inputted order type then rasise an error message to tell user that the order type cannot be used due to certain reason. The source code need to be written there is very simple.
Regards.
Leon. -
Hello Gurus,
Can we restrict a specific order type of sales order in getting collected during the data collection, or is that the only way is customization, like remove all the sales orders with a specific order type after the data collection.
can somebody help me on this.
Thanx & RegardsYou can try defaulting rules to default the demand class so that you can exclude these demand classes during MDS..
-
Restrict Usage of Order Types by Users
Hi
We have two order types existing in SAP and interfaced with MAXIMO. Data flows into these order types via XI Interface from MAXIMO. So, in SAP my client wants to restrict usage of these two order types by SAP users. Is there a way, do i need to config something. Please let me know
Thanks in advanceHi Srinivas
Do you have config steps documentation available. If yes please share. Previous thread was useful but dint supplied me full information. Now I'm confused as, do i have to specify restrictions in Status profile or in Maintain authorization.
Thanks for the initial help. -
How to add a specific order type into any particular report
Hi All,
How to add a specific document type(order type) into any particular report in order to review OTD performance.
I need to add one specific order type to existing reports which will help to check the performance of the delivery type for that particular order type to the users.
Thanks,
RajHi Rajesh,
thanks for the reply when i tried as the way you said.. but the system is asking more details like varient. so if you can clearly specify the process for order type (VOV8-- table TVAK) so it will helpful for me.
Thanks
Raj -
Restricting the order type to sales area!!!
Hi All,
I want some clarification!!!!
Scenario:
(1)We have two sales areas
1000,10,00 and 1000,20,00.
(2)We have two order types zor and zare both have same Document priicng procedure 'A"
(3)Now the client wants to restrict the order typr zor to one sales area 1000,10,00.The system should not allow to raise an order with 1000,20,00 with combination of ZOR and A.
(4)As the client has raised a number of orders with 1000,10,00 with the combination of ZOR.now if we change the document pp of zor to X .will it effect any other documents.
Regards,
RKT.Code: SPRO
IMG --> Sales & Distribution --> Sales --> Sales Document Type --> Assign Sales Area to Sales Document Type.
Here, based on Sales Area, it is possible to restrict the Sales Order Type. This will take care of point number (3).
(4)As the client has raised a number of orders with 1000,10,00 with the combination of ZOR.now if we change the document pp of zor to X .will it effect any other documents.
This will depend on copy control settings.
Regards,
Rajesh Banka -
Item condition for only one particular sales order type, manual condition.
Hi Gurus
We have one condition ZXXX, item condition and it should process manually for one particular order type, ZOR. it should not process for other document types like ZOR1 etc.
i did create condition table with S.org/dis chn/div/ sales.doc type. and kept in access seq. and same in condition type ZXXX. and mainatined condition record as with sales area and doc type ZOR.
condition type settings ate like item condition and manaula entries - no limitation.
in pricing procedure i didnt checked manaul, mandoatry and statistic.
but whn iam craeting in ZOR1 and giving manually condition ZXXX, its accepting but as per our condition record it should get only for ZOR... where iam missing the seeting, please suggest.
Thanks
RamkiHi Ram,
In my point of view i think so you have to create the new document pricing procedure.
after creating that you have maintain new item catergory determination procedure using the new document pricing procedure created before.
assign this document pricing procedure to your ZOR document type.
now create new pricing procedure by copying the standard one.
after that do the assigning procedure for the pricing procedure by using the new document pricing procedure.
then try to create the order with ZOR and also with ZOR1
Make sure that your condition type is not assign to any other pricing procedure.
if it happens then let me know also.
Suneet Prakash -
CAT2 - Restriction on Order Type
Hi all,
in our design, people have to submit Timesheets against Work Order / Operations.
They should only use only 1 type of Work Order so we would like to add a restriction on the order type.
Do you know if there is a simple way of adding this kind of restriction?
Thanks for your help,
ThibaultAs always, you can use the User Exit ZXCATU02 for the i/p Validations.
~Suresh -
How to activate sale order type in CFM1
Hi,
I want to include Sale order type in CFM1 transaction to restrict specific Sale order types along with Plant.Is there any report or Tcode which will enable this field or we can only achieve through exit.
Thanks
VenkadeshHello,
Please check BAdi CIF_INT_MODEL method MODIFY_OBJECT_LIST Modifying list of filter objects.
BAdI solution although it fulfills the general selection options.
Also refer consulting note 902968 - No user exit/BADI to influence selection in CFM1
Best Regards,
R.Brahankar
Maybe you are looking for
-
If i got incorrect characters in the output of sap script? HOW TO CORRECT I
If i got incorrect characters in the output of sap script? HOW TO CORRECT IT?
-
Oracle developer 4.5 (reports and forms ) upgrade
is there any one have a patchset to update developer suite 4.5?
-
CS5 Student and Teacher Edition unable to get Serial
Hi there, I just received my package with the new CS5 Student and Teacher Edition (German) and I tried to follow the instructions to get my serial. The package contains a smal leaflet with an alphanumerical number XXXXX-9999999 on it that tells me to
-
Hi, I have a trigger at the level DB which give me the seq for a PK. I used FORM and have, in the block property, set the DML returning value = YES. As explained by ORACLE, it allows to fire the trigger when I comit my record and then give me the seq
-
Hi, Please give me guidence for below problem. I have report and when it executes ALV is displyaed and in the alv if the user select the push button one popup will be displayed.In the popup two pushbuttons and if the user select CANCEL the popup shou