Reg:Run time error in cjv4
Hi,
I am getting run time error during transfer of project from
a)version --->version
b)Version--->operative
Can anybody suggest some notes to resolve this issue.
With Regards
Rohit Prakash
Hi,
I have found following error type:-
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was
not caught in
procedure "CO_LA_OPER_SEQ_PRE_READ_DB_VER" "(FUNCTION)", nor was it propagated
by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
An Open SQL clause was specified dynamically. The contained field name
"TPLNR" does not exist in any of the database tables from the FROM clause.
With Regards
Rohit Prakash
Similar Messages
-
REG:RUN TIME ERROR WHILE CREATING USERS
HI ALL,
When i am trying to crreate a new user in sap system ecc6.0 with mssql.
an sysntax error is accuring in the system
Syntax error in program "SAPLBUPA_INTERFACE_SERVICE ".
The current ABAP program "SAPLBUPA_INTERFACE_OUTBOUND" had to be terminatedbecause it has
The following syntax error occurred in program "SAPLBUPA_INTERFACE_SERVICE " in
include "LBUPA_INTERFACE_SERVICETOP " in
"The type "BUPA_INBOUND" is unknown."
i also changed the parameter to zero
login/no_automatic_user_sapstar = 0
so that we can login using sap*, which is not possible
please help me in solving this issue.
Thanks!
Vardhan.
Edited by: vardhan197 on Mar 29, 2011 9:59 AMHello,
i have checked my system (ERP6.0) and the type is BUPA_INBOUND is available. So please check this in your system:
call transaction se38 and look at the source code of Report SAPLBUPA_INTERFACE_SERVICE
double click at the INCLUDE LBUPA_INTERFACE_SERVICETOP
scroll down to line 147 where the BUPA_INBOUND is referended
double click at BUPA_INBOUND
If it is available and displayed, activate it and try again to create a new user.
Please also check what authorizations you have.
Good luck
Christian -
While doing SO, im getting run time error - reg;
Hi,
While doing sales order and whenever im doing save its getting runtime error.
Runtime Errors MESSAGE_TYPE_X
Date and Time 14.12.2011 10:55:26
Short dump has not been completely stored (too big)
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
Short text of error message:
Maintain the current CRM release (table CRMPAROLTP)
Long text of error message:
Diagnosis
Various transfer errors occur when transferring SAP sales orders to
CRM or there is no status update or the status update has errors
when transferring from CRM to the SAP system. This is caused by an
incorrect entry for the CRM release in the SAP table CRMPAROLTP, or
no entry is maintained at all.
System Response
To avoid data inconsistencies, this message causes a short dump.
Procedure
Maintain table CRMPAROLTP in your SAP system as is described in SAP
Note 691710 and then repeat the process again.
Procedure for System Administration
Technical information about the message:
Message class....... "V3"
Number.............. 302
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
Runtime Errors MESSAGE_TYPE_X
Date and Time 14.12.2011 10:55:26
hort dump has not been completely stored (too big)
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"SAPMV45A" or "MV45AF0B_BAPIDATEN_ERMITTELN"
"BAPIDATEN_ERMITTELN"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "personal"
Network address...... "192.168.2.11"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x Intel 80686"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "PERSONAL"
Database type..... "ORACLE"
Database name..... "GCU"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Aug 29 2006 00:18:21"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "OCI_10201_SHARE (10.2.0.1.0) "
Patch level. 75
Patch text.. " "
Runtime Errors MESSAGE_TYPE_X
Date and Time 14.12.2011 10:55:26
hort dump has not been completely stored (too big)
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory consumption
Roll.... 8176
EM...... 30311496
Heap.... 0
Page.... 139264
MM Used. 14538320
MM Free. 91952
User and Transaction
Client.............. 100
User................ "INFO_SD"
Language key........ "E"
Transaction......... "VA01 "
Program............. "SAPMV45A"
Screen.............. "SAPMV45A 4001"
Screen line......... 65
Information on where terminated
Termination occurred in the ABAP program "SAPMV45A" - in "BAPIDATEN_ERMITTELN".
The main program was "SAPMV45A ".
In the source code you have the termination point in line 338
of the (Include) program "MV45AF0B_BAPIDATEN_ERMITTELN".
Edited by: kiran35086 on Dec 14, 2011 6:30 AMDear kiran,
This might be many reasons.If you have not done configuration properly system will take you to dump(Run time error).
Try read the diagnosis possibly you may understand the problem.
If not You coordinate with your technical team.
Thanks&Regards
Raghu.k -
Reg : SDCCN / USMM tcode abap run time error
Dear Friends,
Runtime Errors : DBIF_RSQL_SQL_ERROR
Exception : CX_SY_OPEN_SQL_DB
When I run a T.Code SDCCN and USMM, got abap run time error
"SQL error in the database when accessing a table" that errors are below.
Internal Call code is ..........[RSQL/OPEN/TBTCO]
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
"SAPLBTCH" or "LBTCHF19"
"EXECUTE_BP_JOB_SELECT"
The exception must either be prevented, caught within proedure
"EXECUTE_BP_JOB_SELECT" "(FORM)", or its possible occurrence must be declared
in the RAISING clause of the procedure.
This kind of errors found.
what can i do ? Pls give me solutionNo cross posting
Read the "Rules of Engagement"
Regards
Juan -
Run-time error in S_ALR_87013611
Hi,
Recently we have just upgraded to ECC6.0. One of the reports S_ALR_87013611 is giving run-time errors (unable to set linestyle property) when downloading to Excel using office integration option. We are using Excel 2003 SP3. Surprisingly, this report works on some PC but not on others. All the PCs are setup the same way and using the same application version.
Please help. Thank you.Hello
Run again S_ALR_8703611
-> Error displayed
-> Type SU53 in the dialogue box
-> New screen appears
-> Take a screen shot
-> Send to BASIS for analysis
They should fix this. Looks like some authorisation issue.
Also, check for OSS notes
Reg
Suresh -
Hyperion Financial Reports Run-time error '429' ActiveX error:
Hi All,
When i open a Hyperion Financial Reports i am getting an error:
Run-time error '429' ActiveX component can't create object,
If anybody having same issue, please let me know, any help will be appreciated..
ThanksI have tried configuring and running the fix and I get a 'Build Failed' with several errors.
Client is Vista 64bit, if that matters.
Thanks for any help.
-Todd
PS I believe this is the relevant output:
hyperion.home.register:
[exec] Execute failed: java.io.IOException: CreateProcess: regedit.exe /s C
:\Hyperion\BIPlus\install\scripts/../scripts/HyperionHome.reg error=740
[delete] Deleting: C:\Hyperion\BIPlus\install\scripts\HyperionHome.reg
general.replace:
replace.install.all:
replace.install.unix:
replace.install.web.unix:
replace.install:
general.system.files:
sysfiles.deploy:
[echo] C:\Hyperion\BIPlus\install\scripts/..\system\files
BUILD FAILED
C:\Hyperion\BIPlus\install\scripts\SetupHyperionReports.xml:165: Following error
occured while executing this line
C:\Hyperion\BIPlus\install\scripts\SetupSystemFiles.xml:16: Execute failed: java
.io.IOException: CreateProcess: C:\Hyperion\BIPlus\install\scripts\..\bin\update
file.exe 0 C:\Hyperion\BIPlus\install\system\files\OLEDLG.DLL system\files C:\Wi
ndows/system32 error=740
Total time: 4 seconds -
Virtual call run time error why? what is this?
I constantly am getting a notification on my desktop reg: virtual call run time error' WHY??? what on earth is this 'virtual call' WHY ??? am i getting these notifications considering i do not have ANYTHING resembling a 'virtual call' app, add on or anything else on my mozilla
http://support.microsoft.com/kb/125749
it's a MS problem... and applies to visual C++ which is used in Mozilla for Windows.
but is VCPP2005 and 2008, meanwhile Firefox doesn't use them anymore... replaced with VCPP10... as far as i know.
Which version of Firefox are you using?
Maybe you use older version Firefox or have some other program which uses that library.
Try update to newer version... -
Getting run time error in organizer Photoshop Elements 5.0??
How do I fix run time error for Adobe PhotoShop Elements
5.0 when I pull up organizer?What operating system?
-
Dear All,
During the transaction /n/sapapo/ccr (Reconsilation of transaction data) in client SCP 950, system displays the run time error which are attached herewith.
This is the activity a used to execute regularly (Daily) and first time i recieved this message - -
Runtime Errors ASSERTION_FAILED
Date and Time 13.07.2007 10:13:37
ShrtText
The ASSERT condition has been violated.
What happened?
In the current application program, the system recognized a situation
involving the ASSERT statement that should not occur. A runtime error
occurred, either because there was no activation ID entered or because
the ID of the activation mode used was set to "Cancel.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
The following activation ID was used: "No checkpoint group specified"
If the FIELDS addition was used with this ASSERT statement, the content
of the first 8 fields is as follows:
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"ASSERTION_FAILED" C
"/SAPAPO/SAPLTIMESTAMP" or "/SAPAPO/LTIMESTAMPU08"
"/SAPAPO/TIMESTAMP_DIFFERENCE"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "scmprd"
Network address.......... "172.16.10.47"
Operating system......... "AIX"
Release.................. "5.3"
Hardware type............ "0002BFAAD700"
Character length......... 16 Bits
Pointer length........... 64 Bits
Work process number...... 0
Short dump setting....... "full"
Database server.......... "scmprd"
Database type............ "ORACLE"
Database name............ "SCP"
Database owner........... "SAPSCP"
Character set............ "C"
SAP kernel............... "640"
Created on............... "Jan 18 2006 20:47:39"
Created in............... "AIX 1 5 00538A4A4C00"
Database version......... "OCI_920 "
Patch level.............. "109"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
10.2.0.."
SAP database version..... "640"
Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
Memory usage.............
Roll..................... 16192
EM....................... 196923232
Heap..................... 0
Page..................... 98304
MM Used.................. 186636840
MM Free.................. 1895288
SAP Release.............. "640"
User and Transaction
Client.............. 950
User................ "SCMATP"
Language key........ "E"
Transaction......... "/SAPAPO/CCR "
Program............. "/SAPAPO/SAPLTIMESTAMP"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
The termination occurred in the ABAP program "/SAPAPO/SAPLTIMESTAMP" in
"/SAPAPO/TIMESTAMP_DIFFERENCE".
The main program was "/SAPAPO/CIF_DELTAREPORT3 ".
The termination occurred in line 61 of the source code of the (Include)
program "/SAPAPO/LTIMESTAMPU08"
of the source code of program "/SAPAPO/LTIMESTAMPU08" (when calling the editor
610).
Source Code Extract
Line SourceCde
31 lv_time_int_low TYPE i,
32 lv_timediff_int TYPE i,
33 lv_datediff_int TYPE i,
34 lv_time TYPE t,
35 ls_time TYPE tstr_timestr.
36
37 * check timestamp parameter
38 * ASSERT NOT iv_timestamp_high IS INITIAL.
39 * ASSERT NOT iv_timestamp_low IS INITIAL.
40 * ASSERT iv_timestamp_low <= iv_timestamp_high.
41 IF iv_timestamp_high IS INITIAL
42 OR iv_timestamp_low IS INITIAL.
43 RAISE invalid_parameter.
44 ENDIF.
45 IF iv_timestamp_high < iv_timestamp_low.
46 RAISE invalid_parameter.
47 ENDIF.
48
49 * prepare timestamps
50 * .. split into date and time integers
51 ls_timestamp_high = iv_timestamp_high.
52 lv_date_int_high = ls_timestamp_high-date.
53 lv_time_int_high = ls_timestamp_high-time.
54 ls_timestamp_low = iv_timestamp_low.
55 lv_date_int_low = ls_timestamp_low-date.
56 lv_time_int_low = ls_timestamp_low-time.
57
58 * .. calc date diff
59 * .. check against max. allowed integer difference
60 lv_datediff_int = lv_date_int_high - lv_date_int_low.
>>>>> ASSERT lv_datediff_int <= lc_datediff_intmax.
62
63 * calc time diff
64 lv_timediff_int = lv_time_int_high - lv_time_int_low.
65 IF lv_timediff_int < 0.
66 ADD 86400 TO lv_timediff_int.
67 SUBTRACT 1 FROM lv_datediff_int.
68 ENDIF.
69
70 * calc total duration
71 lv_duration_int = lv_datediff_int * 86400 + lv_timediff_int.
72 lv_time = lv_timediff_int.
73 ls_time = lv_time.
74 ls_duration-hours = lv_duration_int DIV 3600.
75 ls_duration-minutes = ls_time-minute.
76 ls_duration-seconds = ls_time-second.
77
78 ev_duration_packed = ls_duration.
79 ev_duration_integer = lv_duration_int.
80 ENDFUNCTION.
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 0
SY-TABIX 1
SY-DBCNT 1
SY-FDPOS 6
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE CIF - Comparison/Reconciliation of Transaction Data
SY-MSGTY
SY-MSGID
SY-MSGNO 000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
Active Calls/Events
No. Ty. Program Include Line
Name
5 FUNCTION /SAPAPO/SAPLTIMESTAMP /SAPAPO/LTIMESTAMPU08 61
/SAPAPO/TIMESTAMP_DIFFERENCE
4 FORM /SAPAPO/SAPLCIF_DELTA3 /SAPAPO/LCIF_DELTA3F17 349
COMPARE_ORDER_HEADER
3 FUNCTION /SAPAPO/SAPLCIF_DELTA3 /SAPAPO/LCIF_DELTA3U03 125
/SAPAPO/CIF_DELTA3_COMP_ORDER
2 FUNCTION /SAPAPO/SAPLCIF_DELTA3 /SAPAPO/LCIF_DELTA3U01 871
/SAPAPO/CIF_DELTA3_COMP
1 EVENT /SAPAPO/CIF_DELTAREPORT3 /SAPAPO/CIF_DELTAREPORT3 189
START-OF-SELECTION
Chosen variables
Name
Val.
No. 5 Ty. FUNCTION
Name /SAPAPO/TIMESTAMP_DIFFERENCE
IV_TIMESTAMP_HIGH
#q1###
02073899
2001125C
IV_TIMESTAMP_LOW
##q!####
00720899
2011125C
EV_DURATION_INTEGER
0
0000
0000
EV_DURATION_PACKED
000000
00000C
SYST-REPID
/SAPAPO/SAPLTIMESTAMP
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
2545454254545444554452222222222222222222
F31010FF310C49D5341D00000000000000000000
%_SPACE
0
0
2
0
LS_TIMESTAMP_HIGH
22000713182959
00000000000000
00000000000000
33333333333333
22000713182959
LV_DATE_INT_HIGH
803363
0042
0C23
LS_TIMESTAMP_HIGH-DATE
22000713
00000000
00000000
33333333
22000713
LV_TIME_INT_HIGH
66599
0002
0147
LS_TIMESTAMP_HIGH-TIME
182959
000000
000000
333333
182959
LS_TIMESTAMP_LOW
20071210182959
00000000000000
00000000000000
33333333333333
20071210182959
LV_DATE_INT_LOW
733021
0025
0BFD
LS_TIMESTAMP_LOW-DATE
20071210
00000000
00000000
33333333
20071210
LV_TIME_INT_LOW
66599
0002
0147
LS_TIMESTAMP_LOW-TIME
182959
000000
000000
333333
182959
SY-UNAME
SCMATP
000000000000
000000000000
544455222222
33D140000000
SCREEN-INPUT
1
0
0
3
1
LV_DATEDIFF_INT
70342
001C
0126
LV_TIMEDIFF_INT
0
0000
0000
SYST
#######################################Ō###############################################䵘 C#Ԁ##
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000004000000
000000000000000000000000000000000000000100000000000000000000000000000000000000000000000D000500
0000000000000000000000000000000800000004000000000000000000000000000000000000010900000005240000
0000010200000000000001060100010C0000000C0000000002000000000000000000000000000B000001000803000C
SY-REPID
/SAPAPO/SAPLTIMESTAMP
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
2545454254545444554452222222222222222222
F31010FF310C49D5341D00000000000000000000
%_DUMMY$$
0000
0000
2222
0000
No. 4 Ty. FORM
Name COMPARE_ORDER_HEADER
SYST-REPID
/SAPAPO/SAPLCIF_DELTA3
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
2545454254544445444543222222222222222222
F31010FF310C396F45C413000000000000000000
GC_APPEND_MODE
3
0
0
3
3
LS_FIELDS_TO_COMPARE-DUEDATE
X
0
0
5
8
SYST
#######################################Ō###############################################䵘 C#Ԁ##
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000004000000
000000000000000000000000000000000000000100000000000000000000000000000000000000000000000D000500
0000000000000000000000000000000800000004000000000000000000000000000000000000010900000005240000
0000010200000000000001060100010C0000000C0000000002000000000000000000000000000B000001000803000C
LS_APO_ORDER-ORDTYPE
5
0
0
3
5
GC_PLANNED_ORDER
5
0
0
3
5
LS_R3_ORDER-STATUSCNF
0
0
2
0
GC_ORDER_STATUS_NO_CONF
1
0
0
3
1
LS_APO_ORDER-STATUSCNF
0
0
2
0
GC_PRED_OUT_DEL
A
0
0
4
1
GC_TND_DELETE
CN
00
00
44
3EDear Sajit,
Go through the following OSS Notes:
<a href="https://websmp110.sap-ag.de/form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=901957&_NLANG=E">901957</a>, <a href="https://websmp110.sap-ag.de/form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1036880&_NLANG=E">1036880</a>, <a href="https://websmp110.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1067414&_NLANG=E">1067414</a>
Regards,
Naveen. -
Hi,
I am trying to create a simple f2f scenairo and when I tested the configuration xi throws this message as :
Interface Mapping run time error...java.lang.nullpointerException thrown during application mapping.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Request Message Mapping
-->
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SOAP:Header>
- <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
<SAP:MessageClass>ApplicationMessage</SAP:MessageClass>
<SAP:ProcessingMode>asynchronous</SAP:ProcessingMode>
<SAP:MessageId>9E0AD300-9F93-11DB-8770-000D60514DD2</SAP:MessageId>
<SAP:TimeSent>2007-01-09T03:43:49Z</SAP:TimeSent>
- <SAP:Sender>
<SAP:Service>CAMEL_BS_01</SAP:Service>
<SAP:Interface namespace="http://kia.com/fiel2file">Source01_MI</SAP:Interface>
</SAP:Sender>
- <SAP:Receiver>
<SAP:Party agency="" scheme="" />
<SAP:Service>Camel_BService_01</SAP:Service>
<SAP:Interface namespace="http://kia.com/fiel2file">Target01_MI</SAP:Interface>
- <SAP:Mapping notRequired="M">
<SAP:ObjectId>j5qiPBwVPU2yonkPwhdt/g==</SAP:ObjectId>
<SAP:SWCV>tR26oJ7nEdu5oM/vCXwv+g==</SAP:SWCV>
<SAP:SP>-1</SAP:SP>
</SAP:Mapping>
</SAP:Receiver>
<SAP:Interface namespace="http://kia.com/fiel2file">Source01_MI</SAP:Interface>
</SAP:Main>
- <SAP:ReliableMessaging xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:QualityOfService>ExactlyOnce</SAP:QualityOfService>
</SAP:ReliableMessaging>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_Equipment_MM_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_Equipment_MM_: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
- <SAP:HopList xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
- <SAP:Hop timeStamp="2007-01-09T03:43:49Z" wasRead="false">
<SAP:Engine type="AE">af.pi7.gbdci550</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XIRA</SAP:Adapter>
<SAP:MessageId>9E0AD300-9F93-11DB-8770-000D60514DD2</SAP:MessageId>
<SAP:Info />
</SAP:Hop>
- <SAP:Hop timeStamp="2007-01-09T03:43:50Z" wasRead="false">
<SAP:Engine type="IS">is.03.gbdci550</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
<SAP:MessageId>9E0AD300-9F93-11DB-8770-000D60514DD2</SAP:MessageId>
<SAP:Info>3.0</SAP:Info>
</SAP:Hop>
</SAP:HopList>
- <SAP:RunTime xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Date>20070108</SAP:Date>
<SAP:Time>224350</SAP:Time>
<SAP:Host>gbdci550</SAP:Host>
<SAP:SystemId>PI7</SAP:SystemId>
<SAP:SystemNr>03</SAP:SystemNr>
<SAP:OS>AIX</SAP:OS>
<SAP:DB>DB6</SAP:DB>
<SAP:Language />
<SAP:ProcStatus>014</SAP:ProcStatus>
<SAP:AdapterStatus>000</SAP:AdapterStatus>
<SAP:User>PIAFUSER</SAP:User>
<SAP:TraceLevel>1</SAP:TraceLevel>
<SAP:LogSeqNbr>002</SAP:LogSeqNbr>
<SAP:RetryLogSeqNbr>000</SAP:RetryLogSeqNbr>
<SAP:PipelineIdInternal>SAP_CENTRAL</SAP:PipelineIdInternal>
<SAP:PipelineIdExternal>CENTRAL</SAP:PipelineIdExternal>
<SAP:PipelineElementId>5EC3C53B4BB7B62DE10000000A1148F5</SAP:PipelineElementId>
<SAP:PipelineStartElementId>5EC3C53B4BB7B62DE10000000A1148F5</SAP:PipelineStartElementId>
<SAP:PipelineService>PLSRV_MAPPING_REQUEST</SAP:PipelineService>
<SAP:QIdInternal>XBTOW0__0001</SAP:QIdInternal>
<SAP:CommitActor>X</SAP:CommitActor>
<SAP:SplitNumber>0</SAP:SplitNumber>
<SAP:NumberOfRetries>0</SAP:NumberOfRetries>
<SAP:NumberOfManualRetries>0</SAP:NumberOfManualRetries>
<SAP:TypeOfEngine client="200">CENTRAL</SAP:TypeOfEngine>
<SAP:PlsrvExceptionCode />
<SAP:EOReferenceRuntime type="TID">097C2FFA403445A30F7600CE</SAP:EOReferenceRuntime>
<SAP:EOReferenceInbound type="TID" />
<SAP:EOReferenceOutbound type="TID" />
<SAP:MessageSizePayload>168</SAP:MessageSizePayload>
<SAP:MessageSizeTotal>2608</SAP:MessageSizeTotal>
<SAP:PayloadSizeRequest>168</SAP:PayloadSizeRequest>
<SAP:PayloadSizeRequestMap>0</SAP:PayloadSizeRequestMap>
<SAP:PayloadSizeResponse>0</SAP:PayloadSizeResponse>
<SAP:PayloadSizeResponseMap>0</SAP:PayloadSizeResponseMap>
<SAP:Reorganization>INI</SAP:Reorganization>
<SAP:AdapterInbound>AENGINE</SAP:AdapterInbound>
<SAP:InterfaceAction>DEL</SAP:InterfaceAction>
<SAP:RandomNumber>67</SAP:RandomNumber>
<SAP:AckStatus>000</SAP:AckStatus>
<SAP:SkipReceiverDetermination />
<SAP:Sender_Agreement_GUID>49574D50A74F3F5D902E20831759594C</SAP:Sender_Agreement_GUID>
<SAP:Serialize_Children>X</SAP:Serialize_Children>
</SAP:RunTime>
- <SAP:PerformanceHeader xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="begin" host="gbdci550">20070109034350.025474</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="end" host="gbdci550">20070109034350.064329</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="begin" host="gbdci550">20070109034350.067038</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="end" host="gbdci550">20070109034350.085552</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="DBQUEUE">DB_ENTRY_QUEUING</SAP:Name>
<SAP:Timestamp type="begin" host="gbdci550">20070109034350.085573</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="DBQUEUE">DB_ENTRY_QUEUING</SAP:Name>
<SAP:Timestamp type="end" host="gbdci550">20070109034350.472198</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
<SAP:Timestamp type="begin" host="gbdci550">20070109034350.473649</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
<SAP:Timestamp type="end" host="gbdci550">20070109034350.483159</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
<SAP:Timestamp type="begin" host="gbdci550">20070109034350.483341</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
<SAP:Timestamp type="end" host="gbdci550">20070109034350.48668</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
<SAP:Timestamp type="begin" host="gbdci550">20070109034350.486921</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
<SAP:Timestamp type="end" host="gbdci550">20070109034350.49182</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="DBQUEUE">DB_SPLITTER_QUEUING</SAP:Name>
<SAP:Timestamp type="begin" host="gbdci550">20070109034350.491835</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="DBQUEUE">DB_SPLITTER_QUEUING</SAP:Name>
<SAP:Timestamp type="end" host="gbdci550">20070109034350.720028</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
<SAP:Timestamp type="begin" host="gbdci550">20070109034350.721545</SAP:Timestamp>
</SAP:RunTimeItem>
</SAP:PerformanceHeader>
- <SAP:Diagnostic xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:TraceLevel>Information</SAP:TraceLevel>
<SAP:Logging>Off</SAP:Logging>
</SAP:Diagnostic>
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">Party normalization: sender</Trace>
<Trace level="1" type="T">Sender scheme external = XIParty</Trace>
<Trace level="1" type="T">Sender agency external = http://sap.com/xi/XI</Trace>
<Trace level="1" type="T">Sender party external =</Trace>
<Trace level="1" type="T">Sender party normalized =</Trace>
<Trace level="1" type="T">Party normalization: receiver</Trace>
<Trace level="1" type="T">Receiver scheme external =</Trace>
<Trace level="1" type="T">Receiver agency external =</Trace>
<Trace level="1" type="T">Receiver party external =</Trace>
<Trace level="1" type="T">Receiver party normalized =</Trace>
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
- <!-- ************************************
-->
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
<Trace level="1" type="T">COMMIT is done by XMB !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="1" type="T">system-ID = PI7</Trace>
<Trace level="1" type="T">client = 200</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2007-01-09T03:43:50Z CET</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- <!-- ************************************
-->
<Trace level="1" type="T">Message-GUID = 9E0AD3009F9311DB8770000D60514DD2</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- <!-- ************************************
-->
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="1" type="T">Queue name : XBTI0008</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0008</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- <!-- ************************************
-->
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = PI7</Trace>
<Trace level="1" type="T">client = 200</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2007-01-09T03:43:50Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- <!-- ************************************
-->
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
- <!-- ************************************
-->
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
- <!-- ************************************
-->
<Trace level="1" type="T">number of receivers: 1</Trace>
<Trace level="1" type="T">Single-receiver split case</Trace>
<Trace level="1" type="T">Post-split internal queue name = XBTOW0__0001</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Persisting single message for post-split handling</Trace>
<Trace level="1" type="T" />
<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- <!-- ************************************
-->
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = PI7</Trace>
<Trace level="1" type="T">client = 200</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2007-01-09T03:43:50Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- <!-- ************************************
-->
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
<Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV" />
- <!-- ************************************
-->
<Trace level="1" type="T">Interface Mapping http://kia.com/fiel2file Equipment_IM_Outbound</Trace>
<Trace level="1" type="T">RuntimeException during appliction Java mapping com/sap/xi/tf/_Equipment_MM_</Trace>
<Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:403) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:141) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor291.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java(Compiled Code)) at $Proxy184.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.listen(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.work(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.loop(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: com.sap.aii.mappingtool.tf3.IllegalInstanceException: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:398) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:141) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor291.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java(Compiled Code)) at $Proxy184.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.listen(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.work(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.loop(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))</Trace>
<Trace level="1" type="T">Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_Equipment_MM_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd</Trace>
<Trace level="1" type="T">com.sap.aii.ibrun.server.mapping.MappingRuntimeException: Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_Equipment_MM_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:73) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor291.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java(Compiled Code)) at $Proxy184.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.listen(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.work(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.loop(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:403) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:141) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor291.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java(Compiled Code)) at $Proxy184.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.listen(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.work(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.loop(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: com.sap.aii.mappingtool.tf3.IllegalInstanceException: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:398) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:141) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor291.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java(Compiled Code)) at $Proxy184.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.listen(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.work(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.loop(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))</Trace>
<Trace level="1" type="E">CL_XMS_PLSRV_MAPPING~ENTER_PLSRV</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- <!-- ************************************
-->
</SAP:Trace>
</SOAP:Header>
- <SOAP:Body>
- <SAP:Manifest xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7">
- <SAP:Payload xlink:href="cid:[email protected]">
<SAP:Name>MainDocument</SAP:Name>
<SAP:Description />
<SAP:Type>Application</SAP:Type>
</SAP:Payload>
</SAP:Manifest>
</SOAP:Body>
</SOAP:Envelope>
Please I request to give me some hint how to troubleshoot this issue.
Thanks a lot,
SrujanHi, i have the same type of error when testing configuration, but it seems that the mapping even doesn't start :
i'm creating an EBP to XCBL scenario, so it's a RFC->XI->XCBL 3.5
Here is the Java exception
Mappage d'interface
Can someone be helpful for that ?
Regards
Laurent
Message was edited by:
Laurent Gitton -
Run-Time error '-2147417848 (80010108) in Crystal Report on SAP BW Query
I have installed Crystal Report 2008 SP1 and the Business Objects Integration kit for 3.1 but when I try to create a report on top of an SAP BW query using the toolbar, after entering the logon parameters for SAP BW, I get a error message :
Run-Time error '-2147417848 (80010108)
Automation error
The object invoked has disconnected from its clients.
CR exits after this error message.
I have tried uninstalling the Kit and CR, cleaning up the registry, and installing it again and still got this error message - It is the same for all my SAP BWs.
Anyone ever had this?
Thank you,
R.Is this still an issue?
-
Hi,
Not able to open PDF or do any changes even if the PDF opens. Run Time Error is shown every time when trying to open PDF. Please helpHi Shilpa ,
Please refer to the following link and see if that helps you out.
https://helpx.adobe.com/acrobat/kb/runtime-error-roaming-profile-workflows.html
Are you trying to access the PDF with Acrobat or Adobe Reader?
Regards
Sukrit Dhingra -
Xml Publisher run time error '5148'
Dear
I am using XML publisher to convert data in excel from the oracle,so first i have generated data in xml by report builder and open xml file in Word document through >template builder >data > load xml data,it's find but i use insert menu and select all field then it give message which i have mentioned below,
run time error '5148'
The number must be between 1 to 63
I think, is it column limitation because i have done this activity later but right now i have added more column so may be that's why it is showing the error but my client need to show data in excel,so how i can fulfill this requirement,is there any other solution ?
Please help on this regard. thanks in advance.Just for future poor souls who may be pulling their hair out over the same issue, I eventually got to the bottom of this cryptic error message.
Do not try to import all your fields at once if your group has over 63 of them, as it will fail.
If you use the Insert Table option, and try to put all the fields in at once, it will give you a more meaningful message, and the one it SHOULD have given you in the first place, which is "A table cannot contain more than 63 columns".
So - Import them, a few at a time. Then move them all into one group and you're good to go. -
Since updating to firefox 15. whatever and now 16.0.1, i have been unable to open up any email attachments in my aol email account. I am able to view them via internet explorer. Initially the attachment will open (i can see it) but then a message of "run time error" comes up and when I close that window, the document goes blank. Also, today I clicked on a link via an aol news story and the same thing happened. It went to my firefox downloads, I was able to see part of the document and then that window with "run time error" message in it popped up. Help!!!!
This is a tip I got from ehow.com:
"While less common in Firefox, runtime errors can still occur on that browser. To prevent it from happening again, merely uninstall and reinstall Firefox on your computer." -
Hi All
Please help, I have recently got a new PC and reinstalled Contribute CS3. I had to update to MS Service Pack 3 due to other software requirements.
I previously had some shockwave files saved on to pages within my site, however each time i now try to update the pages with any shockwave file on the page, I get the following.
A Run Time Error has Occured
Do you wish to debug?
LIne '0'
Error 'Null' is Null or not an object.
With an option of YES or No
If I press 'No' I end up in a continous loop and end up having to carry out an End Task.
If I press 'YES' I end up In Microsoft Script Editor with the code below
try { document.getElementById("").SetReturnValue(__flash__toXML(getFlashLogLevel("xcelsius")) ); } catch (e) { document.getElementById("").SetReturnValue("<undefined/>"); }. There is no way of editing the code and I still end up ending the task.
Could anyone tell me if this is related to the installation of Serive Pack 3 or is there something more sinister going on.
Thanks fior reading and any adive would be gratefully received.
Thank
LukeHi Krishna
Thanks for your reply, it was while trying to "edit" the page containing the shockwave file however it’s a bit of a strange one, as When I reposted this post , I had been experiencing the problem for about a week. I then went on leave for a week and when I returned it started working again???. I queried with my IT department if anything had changed or been updated but they could not think of anything.
So for now it's working, but if you have any thoughts on what may of happened I would appreciate any suggestions?
Thanks again
Luke
Maybe you are looking for
-
NWDS Webas Java to Abap JCO call
Hi, I have WebAS Java + ABAP Stack 6.40. For development I use SAP NetWeaver Developer Studio Version: 2.0.23 I would like to call RFM from Java. Can I call RFC from Java using the JAVA <-> ABAP RFC destinations, or do I have to log on to ABAP explic
-
I have a macbookair tried to reboot but only get flasjhing folders icon with question mark
help! macbook air won't boot up. screen is white with flashing Folders Icon with quesion mark inside. any suggestions?
-
Catalog Manager Error when using the Create Report under Tools
When trying to save the output from the Create Report option under Tools in the Catalog Manager, I get "An Internal error has occurred during: 'Catalog Report'". Has anyone else encountered this or does anyone have a suggestion? Thanks
-
100% Utilization in Server
Hi, Application Server UNX0124 on QR1( Quality ECC Ssytem)doesnu2019t seem right. Constantly shown as 100% utilisation, memory usage the same etc, even over wekeend when it didnu2019t seem that busy with jobs. Not sure if theres a problem with s
-
Warning: Cache size set too large?
I've recently installed a SSD to work as a dedicated cache drive, and I've directed the 3 cache settings in AE (CS6) to it. The drive is 240GB, but I can't put the cache size over 150GB without getting a warning that it's set too high. Is this true?