Reg runtime error

hai to all,
i am trying to run PO bapi. suddenly i am getting runtime error as
"Data objects in a Unicode program are not convertible"
Error in ABAP application program.                                                                               
The current ABAP program "SAPLGRAP" had to be terminated because one of the  statements could not be be executed.                                                                               
This is probably due to an error in the ABAP program.                        
i tried to debug the entire program , runtime error occurs immediately after executing.
please let me know how to correct the error
regards
vijay

Hi,
This may be due to some structure incompatibility. use function module 'pi_bp_move_unicode' to move the structures, there by avoiding dumps. The imported parameter from the FM should be sent to the BAPI.
If this is useful, award points pls..
Regards,
Bharadwaj

Similar Messages

  • Reg SDCCN and USMM - Abap runtime error

    Dear Friends,
    Runtime Errors : DBIF_RSQL_SQL_ERROR
    Exception : CX_SY_OPEN_SQL_DB
    When I run a T.Code SDCCN and USMM, got abap run time error
    "SQL error in the database when accessing a table" that errors are below.
    Internal Call code is ..........[RSQL/OPEN/TBTCO]
    "DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
    "SAPLBTCH" or "LBTCHF19"
    "EXECUTE_BP_JOB_SELECT"
    The exception must either be prevented, caught within proedure
    "EXECUTE_BP_JOB_SELECT" "(FORM)", or its possible occurrence must be declared
      in the  RAISING clause of the procedure.
    This kind of errors found.
    what can i do ? Pls give me advice
    Regards
    keshav

    hi,
    please share the solution how you solve the Question.
    Because of some times i got the same dump.
    Regards,
    Ananth

  • Reg : Daily i got 120 ABAP Runtime Error with in 40 Mins(Early Morning)

    Dear Friends,
    I got following errors regularly. when i run t.code RSBTCDEL and RSSNAPDL. what can i do? then Regularly morning i got same morethan 120 Error. User is SAPSYS 000 Client. How can avoid this type of ABAP Runtime Error.
    Runtime Errors         DBIF_RSQL_SQL_ERROR
    Exception              CX_SY_OPEN_SQL_DB
    Date and Time          10.06.2009 15:04:23
    Short text
         SQL error in the database when accessing a table.
    What can you do?
         Note which actions and input led to the error.
         For further help in handling the problem, contact your SAP administrator
         You can use the ABAP dump analysis transaction ST22 to view and manage
         termination messages, in particular for long term reference.
    How to correct the error
         Database error text........: "[601] Could not continue scan with NOLOCK due to
          data movement."
         Internal call code.........: "[RSQL/FTCH/TBTCO ]"
         Please check the entries in the system log (Transaction SM21).
         If the error occures in a non-modified SAP program, you may be able to
         find an interim solution in an SAP Note.
         If you have access to SAP Notes, carry out a search with the following
         keywords:
         "DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
         "SAPLBTCH" or "LBTCHF19"
         "EXECUTE_BP_JOB_SELECT"
    If you cannot solve the problem yourself and want to send an error notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System u2192 List u2192 Save u2192 Local File u2192 (Unconverted)".
    2. Corresponding system log
    Display the system log by calling transaction SM21.   Restrict the time interval to 10 minutes before and five minutes after the short dump. Then choose "System->List->Save->Local File-(Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP program: The source code of the program   In the editor, choose "Utilities->More Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which actions and input led to the error. The exception must either be prevented, caught within proedure
    "EXECUTE_BP_JOB_SELECT" "(FORM)", or its possible occurrence must be declared
    in the RAISING clause of the procedure. To prevent the exception, note the following:
    Client.............. 400
    User................ "BASIS"
    Language key........ "E"
    Transaction......... "SE38 "
    Transactions ID..... "D7A155DEA42EF1EEB52A000423BF7C3A"
    Program............. "SAPLBTCH"      ( Run a Sap Standard Report RSBTCDEL)
    Screen.............. "SAPMSSY0 1000"
    Regards
    keshav

    Hi Juan,
    My System is
    ECC 6.0
    Database : MS SQL Server 2005
    OS - Windows 2003 server
    SAP Patches level is Basis - SAPKB70016
                                   ABAP - SAPKA70016
                                   Kernel patch level - 185
    when i has update the kernel patches after only i got this error morethan 120 like early morning 4.40 AM to 5.18 AM regularly. what can i do?
    Regards
    keshav

  • Reg : USMM Abap runtime Error

    Dear Friends,
    Greetings, I got ABAP runtime error in tcode USMM after implement the oss note 1150840  correction.
    ERROR is SYNTAX_ERROR
      Syntax error in program "RSUVM000 " this program unfortunatley can not be executed.
    The following syntax error occurred in program "RSUVM000 " in include "RSUVMINC  " in line 1605
    "The type "SX_ADDRESS" is unknown."
    ECC 6.0 with SQl Server 2005 and windows 2003 server
    Pls give suggession to me friends
    Regards
    keshav

    Hi Subash,
    Basis Patch level is SAPKB70013, ABAP KA70013.
    Now we have plan to updation of patches. Before that SAp asking USMM(User Measurement report) so i can execute USMM report.
    what can i do now?
    Regards
    kesav

  • Reg Blocked Export Documents Runtime Error

    Hi..
    I am using the transaction '/SAPSLL/BL_DOC_SD_R3' to see blocked export documents.......
    Now when i run it for a plant and about 40 thousand sales orders... it is going for a runtime error.....
    I need to know for how many records can i run this transaction at one time..  ......
    Regards.

    Gautham..
    The selection screen stuff did not help....
    This is the error which i am getting...
    Runtime errors         DBIF_RSQL_INVALID_RSQL
    Exception              CX_SY_OPEN_SQL_DB
    Possible errors:
    o The maximum size of an SQL statement has been exceeded.
    o The statement contains too many input variables.
    o The space needed for the input data exceeds the available memory.

  • Reg the CONVT_NO_NUMBER Runtime Error

    Dear all,
    I have been trying to upload the G/L account information and using BDC. I have reduced my input fields to Header Data, PK, Acct Number, Amount and KOSTL. When I call the transaction I get the runtime Error. I learnt its because of the Number Interpretation, and so did the coding. But still it says the same error.
    I declared a character field and moved the amount, filled the zeros for SAKNR and KOSTL but still throws the error.
    Any help will be appreciated, plss..
    Thanks in advance,
    Leo

    Dear all,
    Here I have pasted the code. Can you please check with amount.... The code is in FM.
    <u><b>INPUT VALUES</b></u>
    ITAB-BSCHL = '40'.
    ITAB-SAKNR = '812070'.
    ITAB-WRBTR = '30881.00'.
    *ITAB-GSBER = '1162 '.
    ITAB-KOSTL = '11620009'.
    <u><b>Date Validations</b></u>
    MOVE P_BUDAT(4)  TO TEM+4(4).
      MOVE P_BUDAT+4(2) TO TEM(2).
      MOVE P_BUDAT6(2) TO TEM2(2).
      MOVE P_BUDAT(4)  TO TEM+4(4).
      MOVE P_BUDAT+4(2) TO TEM(2).
      MOVE P_BUDAT6(2) TO TEM2(2).
      MOVE P_BLDAT(4)  TO TEM1+4(4).
      MOVE P_BLDAT+4(2) TO TEM1(2).
      MOVE P_BLDAT6(2) TO TEM12(2).
      MOVE P_BLDAT(4)  TO TEM1+4(4).
      MOVE P_BLDAT+4(2) TO TEM1(2).
      MOVE P_BLDAT6(2) TO TEM12(2).
    <u><b>AMOUNT</b></u>
    WRBTR IS CHARACTER OF LENGHT 16.
    WRITE ITAB-WRBTR TO WRBTR.
    translate WRBTR USING ','.
    CONDENSE WRBTR NO-GAPS.
    <u><b>SAKNR AND KOSTL Validations</b></u>
      IF ITAB-KOSTL+8(2) EQ SPACE.
        MOVE ITAB-KOSTL       TO  HOLD_KOSTL+2(8).
        MOVE '00'      TO  HOLD_KOSTL(2).
      ELSE.
        MOVE ITAB-KOSTL       TO  HOLD_KOSTL.
      ENDIF.
    FIELD_LENGTH = STRLEN( ITAB-SAKNR ).
      IF FIELD_LENGTH EQ 10.
        MOVE ITAB-SAKNR      TO   HOLD_SAKNR.
      ELSE.
        MOVE ITAB-SAKNR(6)     TO   HOLD_SAKNR+4(6).
        MOVE '0000'      TO   HOLD_SAKNR(4).
      ENDIF.
    <u><b>BDC</b></u>
    PERFORM NEW_DYNPRO USING 'SAPMF05A' '0100'.
    PERFORM NEW_FIELD USING 'BKPF-BUDAT' TEM.
    PERFORM NEW_FIELD USING 'BKPF-BLDAT' TEM1.
    PERFORM NEW_FIELD USING 'BKPF-MONAT' P_MONAT.
    PERFORM NEW_FIELD USING 'BKPF-WAERS' 'USD'.
    PERFORM NEW_FIELD USING 'BKPF-BUKRS' P_BUKRS.
    PERFORM NEW_FIELD USING 'BKPF-BKTXT' P_BKTXT.
    PERFORM NEW_FIELD USING 'RF05A-NEWBS' ITAB-BSCHL.
    PERFORM NEW_FIELD USING 'RF05A-NEWKO' HOLD_SAKNR.
    *PERFORM NEW_FIELD USING 'BDC_OKCODE' '/11'.
    PERFORM NEW_DYNPRO USING 'SAPMF05A' '0300'.
    PERFORM NEW_FIELD USING 'BSEG-WRBTR' WRBTR.
    PERFORM NEW_DYNPRO USING 'SAPLKACB' '0002'.
    PERFORM NEW_FIELD USING 'COBL-KOSTL' HOLD_KOSTL.
    PERFORM NEW_DYNPRO USING 'SAPMF05A' '0300'.
    PERFORM NEW_FIELD USING 'RF05A-NEWKO' '          '.
    PERFORM NEW_FIELD USING 'RF05A-NEWBS' '  '.
    PERFORM NEW_FIELD USING 'BDC_OKCODE' '/11'.
    CALL TRANSACTION 'F-02' USING BDCDATA MODE 'A' UPDATE 'A'.
    It says CONVT_NO_NUMBER occurs.
    Please help me in this, I know its simple but couldnt find the place of the error. Your help will be appreciated.
    Thanks & Regards
    Jay

  • Runtime error in web dynpro java

    Hi friends,
    i have designed and run the project for adobe pdf form,compliation is ok...but it produce runtime error please tel me what is error how to rectify that...
    The error is
    While processing the current request, an exception occured which could not be handled by the application or the framework.
    If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
    Root Cause
    The initial exception that caused the request to fail, was:
       com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized. The requested URL was:"https://<name>.us:443/AdobeDocumentServices/Config?style=document"
        at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.handleResponseMessage(MimeHttpBinding.java:980)
        at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1430)
        at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:78)
        at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:95)
        at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:385)
        ... 35 more
    Thanks in advance
    Manee R

    Hi Mani,
    To be able to use PDF forms in Web Dynproapplications:
    &#56256;&#56442;SAPNetWeaverDeveloper Studio(minimum SPS 11) is installed
    &#56256;&#56442;Adobe LiveCycleDesigner7.0 is installed
    &#56256;&#56442;Adobe Reader7.0.x is installed
    &#56256;&#56442;SAP NetWeaverWeb AS Javacompatible with the DevStudiois installed
    &#56256;&#56442;The Adobe Document Servicesare deployed and configured on the SAP J2EE Engine.
    &#56256;&#56442;The Active Component Framework(ACF) of the Interactive Forms integration is installed. (not mandatory)
    Check this.
    reg errors in webdynpro runtime
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2b6db1c4-0801-0010-faa5-ff4b4df55b45
    Regards,
    Mithu

  • Runtime error while creating logical database report pgm

    Hi,
        I have started doing pgm on Logical Database report using VBAK,VBAP and MARA. I took VBAK as the root node and VBAP& MARA  as subnodes. The actual requirement is:-  I am trying to place these tables in Application server for perfromance issue using Logical database. Based on sales, the items need to be be displayed. And based on Items, the material data should be displayed.So root node here is VBAK.
    I have created these 3 nodes in SE36 tx.code. when I go back to se36 main screen and under "subobjects"  ,I've selected "selections". I got a dialog box saying that "Nodes for which free selections are to be made". I have clicked on the radio buttons.And then clicked on "transfer" . I am getting a runtime error . Please let me know the solution.
        Please do send me the actual process to goon with logical database reporting.

    Hello
    Logically speaking, a company code can have more than one FSV as long as they share the same chart of accounts.
    When COA is common, the FSV pattern can be designed seperatly to serve the purpose of varied reporting.
    The dump you are getting is a temporary snag. Take a screen shot from SM54 after you execute the report and pass it to BASIS for analysis. They would fix that.
    Reg
    assign points if useful

  • GETWA_NOT_ASSIGNED - Runtime Error in MIGO

    Dear All
    I am receiving GETWA_NOT_ASSIGNED - Runtime Error in MIGO transaction for a particular user only in production system. I am not able to narrow down is this transaction specific or user issue.  I searched the forum and not able to get reason.  If someone knows about ths kindly give me a hint.
    Regards,
    Venkat

    Hi,
    Please check if any User Exit BADI implemented and have a look into below thread
    Reg Dump in MIGO Transaction
    GETWA_NOT_ASSIGNED run time error_MIGO processing stock transport order
    Shiva

  • Runtime Error - Order Status

    Hi friends,
    Pls check below the runtime error description ,which I'm getting when releasing the Order - PM.
    Pls advise, What happ'd and how to fix it.
    Regards
    Sankar.
    Runtime Errors MESSAGE_TYPE_X
    Date and Time 31.03.2008 13:16:08
    Short text 
    The current application triggered a termination with a short dump. 
    What happened? 
    The current application program detected a situation which really 
    should not occur. Therefore, a termination with a short dump was 
    triggered on purpose by the key word MESSAGE (type X). 
    What can you do? 
    Note down which actions and inputs caused the error. 
    To process the problem further, contact you SAP system 
    administrator. 
    Using Transaction ST22 for ABAP Dump Analysis, you can look 
    at and manage termination messages, and you can also 
    keep them for a long time. 
    Error analysis 
    Short text of error message: 
    Unable to read RFC destination WORKFLOW_LOCAL_250 
    Long text of error message: 
    Technical information about the message: 
    Message class....... "SWF_RUN" 
    Number.............. 617 
    Variable 1.......... "WORKFLOW_LOCAL_250" 
    Variable 2.......... "RFC_READ_DESTINATION_TYPE" 
    Variable 3.......... "DESTINATION_NOT_EXIST" 
    Variable 4.......... " " 
    How to correct the error 
    Probably the only way to eliminate the error is to correct the program. 
    If the error occures in a non-modified SAP program, you may be able to 
    find an interim solution in an SAP Note. 
    If you have access to SAP Notes, carry out a search with the following 
    keywords: 
    "MESSAGE_TYPE_X" " " 
    "CL_SWF_RUN_WIM_LOCAL==========CP" or "CL_SWF_RUN_WIM_LOCAL==========CM088" 
    "IF_SWF_RUN_WIM_UTL_INTERNAL~GET_SYSTEM_USER" 
    If you cannot solve the problem yourself and want to send an error 
    notification to SAP, include the following information: 
    1. The description of the current problem (short dump) 
    To save the description, choose "System->List->Save->Local File 
    (Unconverted)". 
    2. Corresponding system log 
    Display the system log by calling transaction SM21. 
    Restrict the time interval to 10 minutes before and five minutes 
    after the short dump. Then choose "System->List->Save->Local File 
    (Unconverted)". 
    3. If the problem occurs in a problem of your own or a modified SAP 
    program: The source code of the program 
    In the editor, choose "Utilities->More 
    Utilities->Upload/Download->Download". 
    4. Details about the conditions under which the error occurred or which 
    actions and input led to the error. 
    System environment 
    SAP-Release 700 
    Application server... "SILDEV" 
    Network address...... "192.168.255.70" 
    Operating system..... "Windows NT" 
    Release.............. "5.2" 
    Hardware type........ "4x IA64 Level 3" 
    Character length.... 16 Bits 
    Pointer length....... 64 Bits 
    Work process number.. 2 
    Shortdump setting.... "full" 
    Database server... "SILDEV" 
    Database type..... "MSSQL" 
    Database name..... "DEV" 
    Database user ID.. "dev" 
    Char.set.... "C" 
    SAP kernel....... 700 
    created (date)... "Mar 3 2008 03:55:37" 
    create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10" 
    Database version. "SQL_Server_8.00 " 
    Patch level. 150 
    Patch text.. " " 
    Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194" 
    SAP database version. 700 
    Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows 
    NT 6.0" 
    Memory consumption 
    Roll.... 16192 
    EM...... 8379680 
    Heap.... 0 
    Page.... 16384 
    MM Used. 4889280 
    MM Free. 3487552 
    User and Transaction 
    Client.............. 250 
    User................ "PM5CHARL" 
    Language Key........ "E" 
    Transaction......... " " 
    Transactions ID..... "49F6FEDCA000F177897B0017A4ABF059" 
    Program............. "CL_SWF_RUN_WIM_LOCAL==========CP" 
    Screen.............. "SAPMSSY1 3004" 
    Screen Line......... 2 
    Information on caller of Remote Function Call (RFC): 
    System.............. "DEV" 
    Database Release.... 700 
    Kernel Release...... 700 
    Connection Type..... 3 (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.) 
    Call Type........... "synchron and transactional (emode 0, imode 0)" 
    Inbound TID.........." " 
    Inbound Queue Name..." " 
    Outbound TID........."C0A8FF46013847F096C00004" 
    Outbound Queue Name.." " 
    Client.............. 250 
    User................ "PM5CHARL" 
    Transaction......... " " 
    Call Program........."SAPLERFC" 
    Function Module..... "ARFC_DEST_SHIP" 
    Call Destination.... "NONE" 
    Source Server....... "SILDEV_DEV_00" 
    Source IP Address... "192.168.255.70" 
    Additional information on RFC logon: 
    Trusted Relationship " " 
    Logon Return Code... 0 
    Trusted Return Code. 0 
    Note: For releases < 4.0, information on the RFC caller are often 
    only partially available. 
    Information on where terminated 
    Termination occurred in the ABAP program "CL_SWF_RUN_WIM_LOCAL==========CP" - 
    in "IF_SWF_RUN_WIM_UTL_INTERNAL~GET_SYSTEM_USER". 
    The main program was "SAPMSSY1 ". 
    In the source code you have the termination point in line 10 
    of the (Include) program "CL_SWF_RUN_WIM_LOCAL==========CM088". 
    Source Code Extract 
    Line  SourceCde 
    1 METHOD if_swf_run_wim_utl_internal~get_system_user . 
    2 DATA: l_excp TYPE REF TO cx_swf_run_wim. 
    3  
    4 TRY. 
    5 IF me->m_int_state-system_user IS INITIAL. 
    6 me->m_int_state-system_user = cl_swf_run_workflow_properties=>get_rfc_destination_us
    7 ENDIF. 
    8 re_user = me->m_int_state-system_user. 
    9 CATCH cx_swf_run_wim INTO l_excp. 
    >>>>> MESSAGE ID l_excp->t100_msg-msgid 
    11 TYPE 'X' 
    12 NUMBER l_excp->t100_msg-msgno 
    13 WITH l_excp->t100_msg-msgv1 l_excp->t100_msg-msgv2 
    14 l_excp->t100_msg-msgv3 l_excp->t100_msg-msgv4. 
    15 ENDTRY. 
    16  
    17 ENDMETHOD. " 
    Contents of system fields 
    Name  Val. 
    SY-SUBRC 0 
    SY-INDEX 2 
    SY-TABIX 1 
    SY-DBCNT 0 
    SY-FDPOS 1 
    SY-LSIND 0 
    SY-PAGNO 0 
    SY-LINNO 1 
    SY-COLNO 1 
    SY-PFKEY  
    SY-UCOMM  
    SY-TITLE CPIC and RFC Control 
    SY-MSGTY X 
    SY-MSGID SWF_RUN 
    SY-MSGNO 617 
    SY-MSGV1 WORKFLOW_LOCAL_250 
    SY-MSGV2 RFC_READ_DESTINATION_TYPE 
    SY-MSGV3 DESTINATION_NOT_EXIST 
    SY-MSGV4  
    SY-MODNO 0 
    SY-DATUM 20080331 
    SY-UZEIT 131608 
    SY-XPROG SAPMSSY1 
    SY-XFORM XAB_READ 
    Active Calls/Events 
    No. Ty. Program Include Line 
    Name 
    26 METHOD CL_SWF_RUN_WIM_LOCAL==========CP CL_SWF_RUN_WIM_LOCAL==========CM088 10 
    CL_SWF_RUN_WIM_LOCAL=>IF_SWF_RUN_WIM_UTL_INTERNAL~GET_SYSTEM_USER 
    25 METHOD CL_SWF_UTL_MAIL===============CP CL_SWF_UTL_MAIL===============CM00J 5 
    CL_SWF_UTL_MAIL=>GET_OWNER 
    24 METHOD CL_SWF_UTL_MAIL===============CP CL_SWF_UTL_MAIL===============CM002 37 
    CL_SWF_UTL_MAIL=>IF_SWF_UTL_MAIL~SEND 
    23 METHOD CL_SWF_RUN_WIM_LOCAL==========CP CL_SWF_RUN_WIM_LOCAL==========CM0IE 38 
    CL_SWF_RUN_WIM_LOCAL=>IF_SWF_RUN_WIM_INTERNAL~SEND_ERROR_REPAIR_MAIL 
    22 METHOD CL_SWF_RUN_WIM_STATE==========CP CL_SWF_RUN_WIM_STATE==========CM021 7 
    CL_SWF_RUN_WIM_STATE=>DYN_SEND_ERROR_REPAIR_MAIL 
    21 METHOD CL_SWF_RUN_WIM_STATE==========CP CL_SWF_RUN_WIM_STATE==========CM01V 12 
    CL_SWF_RUN_WIM_STATE=>EXECUTE_STATE_TRANSITION 
    20 METHOD CL_SWF_RUN_WIM_STATE_FLOW=====CP CL_SWF_RUN_WIM_STATE_FLOW=====CM004 2 
    CL_SWF_RUN_WIM_STATE_FLOW=>IF_SWF_RUN_WIM_STATE~EXECUTE_STATE_TRANSITION 
    19 METHOD CL_SWF_RUN_WIM_LOCAL==========CP CL_SWF_RUN_WIM_LOCAL==========CM09A 72 
    CL_SWF_RUN_WIM_LOCAL=>SET_STATUS_INTERNAL 
    18 METHOD CL_SWF_RUN_WIM_LOCAL==========CP CL_SWF_RUN_WIM_LOCAL==========CM0H3 16 
    CL_SWF_RUN_WIM_LOCAL=>_SET_STATUS 
    17 METHOD CL_SWF_RUN_WIM_LOCAL==========CP CL_SWF_RUN_WIM_LOCAL==========CM04P 7 
    CL_SWF_RUN_WIM_LOCAL=>IF_SWF_RUN_WIM_INTERNAL~SET_STATUS 
    16 METHOD CL_SWF_RUN_WIM_EXECUTION_MGR==CP CL_SWF_RUN_WIM_EXECUTION_MGR==CM011 12 
    CL_SWF_RUN_WIM_EXECUTION_MGR=>SET_WORKITEM_STATUS_ERROR 
    15 METHOD CL_SWF_RUN_WIM_EXECUTION_MGR==CP CL_SWF_RUN_WIM_EXECUTION_MGR==CM01A 81 
    CL_SWF_RUN_WIM_EXECUTION_MGR=>HANDLE_EXCEPTION_RESULT 
    14 METHOD CL_SWF_RUN_WIM_EXECUTION_MGR==CP CL_SWF_RUN_WIM_EXECUTION_MGR==CM00R 93 
    CL_SWF_RUN_WIM_EXECUTION_MGR=>HANDLE_EXECUTION_RESULT 
    13 METHOD CL_SWF_RUN_WIM_EXECUTION_MGR==CP CL_SWF_RUN_WIM_EXECUTION_MGR==CM008 144 
    CL_SWF_RUN_WIM_EXECUTION_MGR=>START_EXECUTION 
    12 METHOD CL_SWF_RUN_WORKFLOW_START=====CP CL_SWF_RUN_WORKFLOW_START=====CM016 42 
    CL_SWF_RUN_WORKFLOW_START=>START_WORKITEM 
    11 METHOD CL_SWF_RUN_WORKFLOW_START=====CP CL_SWF_RUN_WORKFLOW_START=====CM002 33 
    CL_SWF_RUN_WORKFLOW_START=>EXECUTE 
    10 FUNCTION SAPLSWW_SRV LSWW_SRVU13 135 
    SWW_WI_CREATE_VIA_EVENT_INTERN 
    9 FUNCTION SAPLSWW_SRV LSWW_SRVU11 64 
    SWW_WI_CREATE_VIA_EVENT 
    8 FORM SAPLSWW_SRV LSWW_SRVU11 1 
    SWW_WI_CREATE_VIA_EVENT 
    7 FORM SAPMSSY1 SAPMSSY1 271 
    XAB_RUN_DRIVER 
    6 FUNCTION SAPLSXAB LSXABU01 9 
    RFC_RUN_XAB_DRIVER 
    5 FUNCTION SAPLERFC LERFCU01 115 
    ARFC_EXECUTE 
    4 FUNCTION SAPLERFC LERFCU02 386 
    ARFC_DEST_SHIP 
    3 FORM SAPLERFC LERFCU02 1 
    ARFC_DEST_SHIP 
    2 FORM SAPMSSY1 SAPMSSY1 85 
    REMOTE_FUNCTION_CALL 
    1 MODULE (PBO) SAPMSSY1 SAPMSSY1 30 
    %_RFC_START 
    Chosen variables 
    Name 
    Val. 
    No. 26 Ty. METHOD 
    Name CL_SWF_RUN_WIM_LOCAL=>IF_SWF_RUN_WIM_UTL_INTERNAL~GET_SYSTEM_USER 
    RE_USER 
    222222222222 
    000000000000 
    000000000000 
    000000000000 
    L_EXCP 
    B0004000 
    90006000 
    SY-MSGID 
    SWF_RUN 
    55455542222222222222 
    376F25E0000000000000 
    00000000000000000000 
    00000000000000000000 
    L_EXCP->T100_MSG-MSGID 
    SWF_RUN 
    55455542222222222222 
    376F25E0000000000000 
    00000000000000000000 
    00000000000000000000 
    SWFCO_WIM_WI_FORWARD 
    SWW_WI_FORWARD 
    555554544554542222222222222222 
    377F79F6F271240000000000000000 
    000000000000000000000000000000 
    000000000000000000000000000000 
    SY-MSGNO 
    617 
    333 
    617 
    000 
    000 
    L_EXCP->T100_MSG+40(6) 
    617 
    333 
    617 
    000 
    000 
    SY-MSGV1 
    WORKFLOW_LOCAL_250 
    54544445544444533322222222222222222222222222222222 
    7F2B6CF7FCF31CF25000000000000000000000000000000000 
    00000000000000000000000000000000000000000000000000 
    00000000000000000000000000000000000000000000000000 
    L_EXCP->T100_MSG+48(100) 
    WORKFLOW_LOCAL_250 
    54544445544444533322222222222222222222222222222222 
    7F2B6CF7FCF31CF25000000000000000000000000000000000 
    00000000000000000000000000000000000000000000000000 
    00000000000000000000000000000000000000000000000000 
    SY-MSGV2 
    RFC_READ_DESTINATION_TYPE 
    54455444544554445444555542222222222222222222222222 
    263F2514F45349E149FEF49050000000000000000000000000 
    00000000000000000000000000000000000000000000000000 
    00000000000000000000000000000000000000000000000000 
    L_EXCP->T100_MSG+148(100) 
    RFC_READ_DESTINATION_TYPE 
    54455444544554445444555542222222222222222222222222 
    263F2514F45349E149FEF49050000000000000000000000000 
    00000000000000000000000000000000000000000000000000 
    00000000000000000000000000000000000000000000000000 
    SY-MSGV3 
    DESTINATION_NOT_EXIST 
    44554445444544554545522222222222222222222222222222 
    45349E149FEFEF4F5893400000000000000000000000000000 
    00000000000000000000000000000000000000000000000000 
    00000000000000000000000000000000000000000000000000 
    L_EXCP->T100_MSG+248(100) 
    DESTINATION_NOT_EXIST 
    44554445444544554545522222222222222222222222222222 
    45349E149FEFEF4F5893400000000000000000000000000000 
    00000000000000000000000000000000000000000000000000 
    00000000000000000000000000000000000000000000000000 
    SY-MSGV4 
    22222222222222222222222222222222222222222222222222 
    00000000000000000000000000000000000000000000000000 
    00000000000000000000000000000000000000000000000000 
    00000000000000000000000000000000000000000000000000 
    L_EXCP->T100_MSG+348(100) 
    22222222222222222222222222222222222222222222222222 
    00000000000000000000000000000000000000000000000000 
    00000000000000000000000000000000000000000000000000 
    00000000000000000000000000000000000000000000000000 
    %_DUMMY$$ 
    2222 
    0000 
    0000 
    0000 
    No. 25 Ty. METHOD 
    Name CL_SWF_UTL_MAIL=>GET_OWNER 
    RE_OWNER 
    %_DUMMY$$ 
    2222 
    0000 
    0000 
    0000 
    ME->M_OWNER 
    %_VIASELSCR 
    0 
    4 
    ME 
    A0005000 
    E0001000 
    L_WORKITEM 
    60009000 
    3000C000 
    SY-REPID 
    CL_SWF_UTL_MAIL===============CP 
    4455545554544443333333333333334522222222 
    3CF376F54CFD19CDDDDDDDDDDDDDDD3000000000 
    0000000000000000000000000000000000000000 
    0000000000000000000000000000000000000000 
    No. 24 Ty. METHOD 
    Name CL_SWF_UTL_MAIL=>IF_SWF_UTL_MAIL~SEND 
    EX_SENT_TO_ALL 
    2 
    0 
    0 
    0 
    EX_MAIL_OBJECT 
    2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    SYST-REPID 
    CL_SWF_UTL_MAIL===============CP 
    4455545554544443333333333333334522222222 
    3CF376F54CFD19CDDDDDDDDDDDDDDD3000000000 
    0000000000000000000000000000000000000000 
    0000000000000000000000000000000000000000 
    ME 
    A0005000 
    E0001000 
    OBJECT_HD_CHANGE-ACNAM 
    SWW_WI_DISPLAY_FOR_MAIL 
    555554544554455445544442222222222222222222222222222222 
    377F79F4930C19F6F2FD19C0000000000000000000000000000000 
    000000000000000000000000000000000000000000000000000000 
    000000000000000000000000000000000000000000000000000000 
    OBJPARB 
    Table IT_7581x570 
    \CLASS=CL_SWF_UTL_MAIL\METHOD=IF_SWF_UTL_MAIL~SEND\DATA=OBJPARB 
    Table reference: 224 
    TABH+ 0(20) = E06D6DEFF9060000000000000000000000000000 
    TABH+ 20(20) = E0000000F6020000010000003A020000FFFFFFFF 
    TABH+ 40(16) = 042A0200600B000010000000C1248401 
    store = 0xE06D6DEFF9060000 
    ext1 = 0x0000000000000000 
    shmId = 0 (0x00000000) 
    id = 224 (0xE0000000) 
    label = 758 (0xF6020000) 
    fill = 1 (0x01000000) 
    leng = 570 (0x3A020000) 
    loop = -1 (0xFFFFFFFF) 
    xtyp = TYPE#000046 
    occu = 16 (0x10000000) 
    access = 1 (ItAccessStandard) 
    idxKind = 0 (ItIndexNone) 
    uniKind = 2 (ItUniqueNon) 
    keyKind = 1 (default) 
    cmpMode = 2 (cmpSingleMcmpR) 
    occu0 = 1 
    groupCntl = 0 
    rfc = 0 
    unShareable = 0 
    mightBeShared = 1 
    sharedWithShmTab = 0 
    isShmLockId = 0 
    gcKind = 0 
    isUsed = 1 
    isCtfyAble = 1 
    >>>>> Shareable Table Header Data <<<<< 
    tabi = 0x80095FEFF9060000 
    pgHook = 0x0000000000000000 
    idxPtr = 0x0000000000000000 
    shmTabhSet = 0x0000000000000000 
    id = 540 (0x1C020000) 
    refCount = 0 (0x00000000) 
    tstRefCount = 0 (0x00000000) 
    lineAdmin = 16 (0x10000000) 
    lineAlloc = 16 (0x10000000) 
    shmVersId = 0 (0x00000000) 
    shmRefCount = 1 (0x01000000) 
    >>>>> 1st level extension part <<<<< 
    regHook = Not allocated 
    collHook = Not allocated 
    ext2 = Not allocated 
    >>>>> 2nd level extension part <<<<< 
    tabhBack = Not allocated 
    delta_head = Not allocated 
    pb_func = Not allocated 
    pb_handle = Not allocated 
    OBJECT_HD_CHANGE-OBJDES 
    Workflow 405090 set to status ERROR 
    56766667233333327672762776777245545222222222222222 
    7F2B6CF70405090035404F03414530522F2000000000000000 
    00000000000000000000000000000000000000000000000000 
    00000000000000000000000000000000000000000000000000 
    %_FSREG_001 
    OBJCONT 
    Table IT_7609x510 
    \CLASS=CL_SWF_UTL_MAIL\METHOD=IF_SWF_UTL_MAIL~SEND\DATA=OBJCONT 
    Table reference: 225 
    TABH+ 0(20) = 106F6DEFF9060000000000000000000000000000 
    TABH+ 20(20) = E1000000F802000009000000FE010000FFFFFFFF 
    TABH+ 40(16) = 042A0200300B000010000000C1248401 
    store = 0x106F6DEFF9060000 
    ext1 = 0x0000000000000000 
    shmId = 0 (0x00000000) 
    id = 225 (0xE1000000) 
    label = 760 (0xF8020000) 
    fill = 9 (0x09000000) 
    leng = 510 (0xFE010000) 
    loop = -1 (0xFFFFFFFF) 
    xtyp = TYPE#000045 
    occu = 16 (0x10000000) 
    access = 1 (ItAccessStandard) 
    idxKind = 0 (ItIndexNone) 
    uniKind = 2 (ItUniqueNon) 
    keyKind = 1 (default) 
    cmpMode = 2 (cmpSingleMcmpR) 
    occu0 = 1 
    groupCntl = 0 
    rfc = 0 
    unShareable = 0 
    mightBeShared = 1 
    sharedWithShmTab = 0 
    isShmLockId = 0 
    gcKind = 0 
    isUsed = 1 
    isCtfyAble = 1 
    >>>>> Shareable Table Header Data <<<<< 
    tabi = 0x402D5FEFF9060000 
    pgHook = 0x0000000000000000 
    idxPtr = 0x0000000000000000 
    shmTabhSet = 0x0000000000000000 
    id = 541 (0x1D020000) 
    refCount = 0 (0x00000000) 
    tstRefCount = 0 (0x00000000) 
    lineAdmin = 16 (0x10000000) 
    lineAlloc = 16 (0x10000000) 
    shmVersId = 0 (0x00000000) 
    shmRefCount = 1 (0x01000000) 
    >>>>> 1st level extension part <<<<< 
    regHook = Not allocated 
    collHook = Not allocated 
    ext2 = Not allocated 
    >>>>> 2nd level extension part <<<<< 
    tabhBack = Not allocated 
    delta_head = Not allocated 
    pb_func = Not allocated 
    pb_handle = Not allocated 
    OWNER 
    222222222222 
    000000000000 
    000000000000 
    000000000000 
    SENDER 
    222222222222 
    000000000000 
    000000000000 
    000000000000 
    SY-SUBRC 
    0 
    0000 
    0000 
    SWFCO_MAIL_ERROR_NOTIFY 
    0002 
    3333 
    0002 
    0000 
    0000 
    OBJECT_HD_CHANGE 
    E ERRORMESSAGEWorkflow 405090 set to status ERROR 00000000000000 F F S
    4222222222245545445544456766667233333327672762776777245545222222222222222233333333333333242425
    50000000000522F2D5331757F2B6CF70405090035404F03414530522F2000000000000000000000000000000060603
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    OBJECT_TYPE 
    RAW 
    545 
    217 
    000 
    000 
    SWFCO_OBJTYPE_BOR 
    BO 
    44 
    2F 
    00 
    00 
    No. 23 Ty. METHOD 
    Name CL_SWF_RUN_WIM_LOCAL=>IF_SWF_RUN_WIM_INTERNAL~SEND_ERROR_REPAIR_MAIL 
    LT_AGENTS 
    Table IT_7521x28 
    \CLASS=CL_SWF_RUN_WIM_LOCAL\METHOD=IF_SWF_RUN_WIM_INTERNAL~SEND_ERROR_REPAIR_MAIL\DATA=LT_AGEN
    Table reference: 207 
    TABH+ 0(20) = 806B6DEFF9060000000000000000000000000000 
    TABH+ 20(20) = CF000000F0020000010000001C000000FFFFFFFF 
    TABH+ 40(16) = 04180100E006000010000000C1248401 
    store = 0x806B6DEFF9060000 
    ext1 = 0x0000000000000000 
    shmId = 0 (0x00000000) 
    id = 207 (0xCF000000) 
    label = 752 (0xF0020000) 
    fill = 1 (0x01000000) 
    leng = 28 (0x1C000000) 
    loop = -1 (0xFFFFFFFF) 
    xtyp = TYPE#000022 
    occu = 16 (0x10000000) 
    access = 1 (ItAccessStandard) 
    idxKind = 0 (ItIndexNone) 
    uniKind = 2 (ItUniqueNon) 
    keyKind = 1 (default) 
    cmpMode = 2 (cmpSingleMcmpR) 
    occu0 = 1 
    groupCntl = 0 
    rfc = 0 
    unShareable = 0 
    mightBeShared = 1 
    sharedWithShmTab = 0 
    isShmLockId = 0 
    gcKind = 0 
    isUsed = 1 
    isCtfyAble = 1 
    >>>>> Shareable Table Header Data <<<<< 
    tabi = 0xA0696DEFF9060000 
    pgHook = 0x0000000000000000 
    idxPtr = 0x0000000000000000 
    shmTabhSet = 0x0000000000000000 
    id = 537 (0x19020000) 
    refCount = 1 (0x01000000) 
    tstRefCount = 0 (0x00000000) 
    lineAdmin = 16 (0x10000000) 
    lineAlloc = 16 (0x10000000) 
    shmVersId = 0 (0x00000000) 
    shmRefCount = 2 (0x02000000) 
    >>>>> 1st level extension part <<<<< 
    regHook = Not allocated 
    collHook = Not allocated 
    ext2 = Not allocated 
    >>>>> 2nd level extension part <<<<< 
    tabhBack = Not allocated 
    delta_head = Not allocated 
    pb_func = Not allocated 
    pb_handle = Not allocated 
    SYST-REPID 
    CL_SWF_RUN_WIM_LOCAL==========CP 
    4455545554554454444433333333334522222222 
    3CF376F25EF79DFCF31CDDDDDDDDDD3000000000 
    0000000000000000000000000000000000000000 
    0000000000000000000000000000000000000000 
    ME->IF_SWF_RUN_WIM_INTERNAL~M_SWW_WIHEAD+840(28) 
    WS20000014 
    55333333332222 
    73200000140000 
    00000000000000 
    00000000000000 
    SY-REPID 
    CL_SWF_RUN_WIM_LOCAL==========CP 
    4455545554554454444433333333334522222222 
    3CF376F25EF79DFCF31CDDDDDDDDDD3000000000 
    0000000000000000000000000000000000000000 
    0000000000000000000000000000000000000000 
    FUNCNAME 
    SWW_WI_DISPLAY_FOR_MAIL 
    555554544554455445544442222222 
    377F79F4930C19F6F2FD19C0000000 
    000000000000000000000000000000 
    000000000000000000000000000000 
    SWFCO_WI_REMOTE 
    R 
    5 
    2 
    0 
    0 
    PARAMETER-NAME 
    WI_ID 
    54544 
    79F94 
    00000 
    00000 
    SWFCO_CALLBACK_AGENTS 
    CALLBACKAGENTS 
    54444444454444552222222222222222 
    F31CC213BF175E430000000000000000 
    00000000000000000000000000000000 
    00000000000000000000000000000000 
    PARAMETER-VALUE 
    000000405090 
    333333333333 
    000000405090 
    000000000000 
    000000000000 
    ME->IF_SWF_RUN_WIM_INTERNAL~M_SWW_WIHEAD-WI_ID 
    000000405090 
    333333333333 
    000000405090 
    000000000000 
    000000000000 
    PARAMETER 
    807020C0 
    7080A050 
    00000000 
    00100010 
    LS_MAILOBJ 
    2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

    Hi Sankar,
    Clearly RFC destination WORKFLOW_LOCAL_250 doesnot exist. But please don't create it directly using Sm59.
    Log into client 250 and go to transaction SWU3. Here you will get option for creating RFC destination making use of user WF-BATCH. In case there is workflow expert in your project take his help.
    Once this is done this dump should not come.
    Regards.
    Ruchit.

  • Runtime error when running Init Infopack or delta infopack

    Dear All,
    I am getting following error when trying to init infopack
    Runtime Errors         MESSAGE_TYPE_X
    Message class....... "RSM"
    Number.............. 000
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
    Program                                 SAPLRSS1
    Include                                 LRSS1F11
    Row                                     1,543
    Module type                             (FORM)
    Module Name                             RSM1_CHECK_FOR_DELTAUPD
    And this is happening only with one particular infopack of billing item extractor.
    Please help for the same.
    Regards,
    SS

    Hi,
    Can you just give more explanation on what you are trying to do, like conditions.
    Are doing first time init.
    Reg
    Pra

  • RUNTIME Error - User Status for Order release

    HI Friends,
    Pls go thru the run-time error description,which i'm getting on Order release.Pls reply,.
    Runtime Errors         MESSAGE_TYPE_X
    Date and Time          31.03.2008 13:16:08
    Short text
    The current application triggered a termination with a short dump.
    What happened?
    The current application program detected a situation which really
    should not occur. Therefore, a termination with a short dump was
    triggered on purpose by the key word MESSAGE (type X).
    What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
    Error analysis
    Short text of error message:
    Unable to read RFC destination WORKFLOW_LOCAL_250
    Long text of error message:
    Technical information about the message:
    Message class....... "SWF_RUN"
    Number.............. 617
    Variable 1.......... "WORKFLOW_LOCAL_250"
    Variable 2.......... "RFC_READ_DESTINATION_TYPE"
    Variable 3.......... "DESTINATION_NOT_EXIST"
    Variable 4.......... " "
    How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "MESSAGE_TYPE_X" " "
    "CL_SWF_RUN_WIM_LOCAL==========CP" or "CL_SWF_RUN_WIM_LOCAL==========CM088"
    "IF_SWF_RUN_WIM_UTL_INTERNAL~GET_SYSTEM_USER"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
    To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
    Display the system log by calling transaction SM21.
    Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
    In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    System environment
    SAP-Release 700
    Application server... "SILDEV"
    Network address...... "192.168.255.70"
    Operating system..... "Windows NT"
    Release.............. "5.2"
    Hardware type........ "4x IA64 Level 3"
    Character length.... 16 Bits
    Pointer length....... 64 Bits
    Work process number.. 2
    Shortdump setting.... "full"
    Database server... "SILDEV"
    Database type..... "MSSQL"
    Database name..... "DEV"
    Database user ID.. "dev"
    Char.set.... "C"
    SAP kernel....... 700
    created (date)... "Mar 3 2008 03:55:37"
    create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
    Database version. "SQL_Server_8.00 "
    Patch level. 150
    Patch text.. " "
    Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
    SAP database version. 700
    Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
    NT 6.0"
    Memory consumption
    Roll.... 16192
    EM...... 8379680
    Heap.... 0
    Page.... 16384
    MM Used. 4889280
    MM Free. 3487552
    User and Transaction
    Client.............. 250
    User................ "PM5CHARL"
    Language Key........ "E"
    Transaction......... " "
    Transactions ID..... "49F6FEDCA000F177897B0017A4ABF059"
    Program............. "CL_SWF_RUN_WIM_LOCAL==========CP"
    Screen.............. "SAPMSSY1 3004"
    Screen Line......... 2
    Information on caller of Remote Function Call (RFC):
    System.............. "DEV"
    Database Release.... 700
    Kernel Release...... 700
    Connection Type..... 3 (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
    Call Type........... "synchron and transactional (emode 0, imode 0)"
    Inbound TID.........." "
    Inbound Queue Name..." "
    Outbound TID........."C0A8FF46013847F096C00004"
    Outbound Queue Name.." "
    Client.............. 250
    User................ "PM5CHARL"
    Transaction......... " "
    Call Program........."SAPLERFC"
    Function Module..... "ARFC_DEST_SHIP"
    Call Destination.... "NONE"
    Source Server....... "SILDEV_DEV_00"
    Source IP Address... "192.168.255.70"
    Additional information on RFC logon:
    Trusted Relationship " "
    Logon Return Code... 0
    Trusted Return Code. 0
    Note: For releases < 4.0, information on the RFC caller are often
    only partially available.
    Information on where terminated
    Termination occurred in the ABAP program "CL_SWF_RUN_WIM_LOCAL==========CP" -
    in "IF_SWF_RUN_WIM_UTL_INTERNAL~GET_SYSTEM_USER".
    The main program was "SAPMSSY1 ".
    In the source code you have the termination point in line 10
    of the (Include) program "CL_SWF_RUN_WIM_LOCAL==========CM088".
    Source Code Extract
    Line
    SourceCde
    1
    METHOD if_swf_run_wim_utl_internal~get_system_user .
    2
    DATA: l_excp TYPE REF TO cx_swf_run_wim.
    3
    4
    TRY.
    5
    IF me->m_int_state-system_user IS INITIAL.
    6
    me->m_int_state-system_user = cl_swf_run_workflow_properties=>get_rfc_destination_us
    7
    ENDIF.
    8
    re_user = me->m_int_state-system_user.
    9
    CATCH cx_swf_run_wim INTO l_excp.
    >>>>>
    MESSAGE ID     l_excp->t100_msg-msgid
    11
    TYPE   'X'
    12
    NUMBER l_excp->t100_msg-msgno
    13
    WITH   l_excp->t100_msg-msgv1 l_excp->t100_msg-msgv2
    14
    l_excp->t100_msg-msgv3 l_excp->t100_msg-msgv4.
    15
    ENDTRY.
    16
    17
    ENDMETHOD.                    "
    Contents of system fields
    Name
    Val.
    SY-SUBRC
    0
    SY-INDEX
    2
    SY-TABIX
    1
    SY-DBCNT
    0
    SY-FDPOS
    1
    SY-LSIND
    0
    SY-PAGNO
    0
    SY-LINNO
    1
    SY-COLNO
    1
    SY-PFKEY
    SY-UCOMM
    SY-TITLE
    CPIC and RFC Control
    SY-MSGTY
    X
    SY-MSGID
    SWF_RUN
    SY-MSGNO
    617
    SY-MSGV1
    WORKFLOW_LOCAL_250
    SY-MSGV2
    RFC_READ_DESTINATION_TYPE
    SY-MSGV3
    DESTINATION_NOT_EXIST
    SY-MSGV4
    SY-MODNO
    0
    SY-DATUM
    20080331
    SY-UZEIT
    131608
    SY-XPROG
    SAPMSSY1
    SY-XFORM
    XAB_READ
    Active Calls/Events
    No.   Ty.          Program                             Include                             Line
    Name
    26 METHOD       CL_SWF_RUN_WIM_LOCAL==========CP    CL_SWF_RUN_WIM_LOCAL==========CM088    10
    CL_SWF_RUN_WIM_LOCAL=>IF_SWF_RUN_WIM_UTL_INTERNAL~GET_SYSTEM_USER
    25 METHOD       CL_SWF_UTL_MAIL===============CP    CL_SWF_UTL_MAIL===============CM00J     5
    CL_SWF_UTL_MAIL=>GET_OWNER
    24 METHOD       CL_SWF_UTL_MAIL===============CP    CL_SWF_UTL_MAIL===============CM002    37
    CL_SWF_UTL_MAIL=>IF_SWF_UTL_MAIL~SEND
    23 METHOD       CL_SWF_RUN_WIM_LOCAL==========CP    CL_SWF_RUN_WIM_LOCAL==========CM0IE    38
    CL_SWF_RUN_WIM_LOCAL=>IF_SWF_RUN_WIM_INTERNAL~SEND_ERROR_REPAIR_MAIL
    22 METHOD       CL_SWF_RUN_WIM_STATE==========CP    CL_SWF_RUN_WIM_STATE==========CM021     7
    CL_SWF_RUN_WIM_STATE=>DYN_SEND_ERROR_REPAIR_MAIL
    21 METHOD       CL_SWF_RUN_WIM_STATE==========CP    CL_SWF_RUN_WIM_STATE==========CM01V    12
    CL_SWF_RUN_WIM_STATE=>EXECUTE_STATE_TRANSITION
    20 METHOD       CL_SWF_RUN_WIM_STATE_FLOW=====CP    CL_SWF_RUN_WIM_STATE_FLOW=====CM004     2
    CL_SWF_RUN_WIM_STATE_FLOW=>IF_SWF_RUN_WIM_STATE~EXECUTE_STATE_TRANSITION
    19 METHOD       CL_SWF_RUN_WIM_LOCAL==========CP    CL_SWF_RUN_WIM_LOCAL==========CM09A    72
    CL_SWF_RUN_WIM_LOCAL=>SET_STATUS_INTERNAL
    18 METHOD       CL_SWF_RUN_WIM_LOCAL==========CP    CL_SWF_RUN_WIM_LOCAL==========CM0H3    16
    CL_SWF_RUN_WIM_LOCAL=>_SET_STATUS
    17 METHOD       CL_SWF_RUN_WIM_LOCAL==========CP    CL_SWF_RUN_WIM_LOCAL==========CM04P     7
    CL_SWF_RUN_WIM_LOCAL=>IF_SWF_RUN_WIM_INTERNAL~SET_STATUS
    16 METHOD       CL_SWF_RUN_WIM_EXECUTION_MGR==CP    CL_SWF_RUN_WIM_EXECUTION_MGR==CM011    12
    CL_SWF_RUN_WIM_EXECUTION_MGR=>SET_WORKITEM_STATUS_ERROR
    15 METHOD       CL_SWF_RUN_WIM_EXECUTION_MGR==CP    CL_SWF_RUN_WIM_EXECUTION_MGR==CM01A    81
    CL_SWF_RUN_WIM_EXECUTION_MGR=>HANDLE_EXCEPTION_RESULT
    14 METHOD       CL_SWF_RUN_WIM_EXECUTION_MGR==CP    CL_SWF_RUN_WIM_EXECUTION_MGR==CM00R    93
    CL_SWF_RUN_WIM_EXECUTION_MGR=>HANDLE_EXECUTION_RESULT
    13 METHOD       CL_SWF_RUN_WIM_EXECUTION_MGR==CP    CL_SWF_RUN_WIM_EXECUTION_MGR==CM008   144
    CL_SWF_RUN_WIM_EXECUTION_MGR=>START_EXECUTION
    12 METHOD       CL_SWF_RUN_WORKFLOW_START=====CP    CL_SWF_RUN_WORKFLOW_START=====CM016    42
    CL_SWF_RUN_WORKFLOW_START=>START_WORKITEM
    11 METHOD       CL_SWF_RUN_WORKFLOW_START=====CP    CL_SWF_RUN_WORKFLOW_START=====CM002    33
    CL_SWF_RUN_WORKFLOW_START=>EXECUTE
    10 FUNCTION     SAPLSWW_SRV                         LSWW_SRVU13                           135
    SWW_WI_CREATE_VIA_EVENT_INTERN
    9 FUNCTION     SAPLSWW_SRV                         LSWW_SRVU11                            64
    SWW_WI_CREATE_VIA_EVENT
    8 FORM         SAPLSWW_SRV                         LSWW_SRVU11                             1
    SWW_WI_CREATE_VIA_EVENT
    7 FORM         SAPMSSY1                            SAPMSSY1                              271
    XAB_RUN_DRIVER
    6 FUNCTION     SAPLSXAB                            LSXABU01                                9
    RFC_RUN_XAB_DRIVER
    5 FUNCTION     SAPLERFC                            LERFCU01                              115
    ARFC_EXECUTE
    4 FUNCTION     SAPLERFC                            LERFCU02                              386
    ARFC_DEST_SHIP
    3 FORM         SAPLERFC                            LERFCU02                                1
    ARFC_DEST_SHIP
    2 FORM         SAPMSSY1                            SAPMSSY1                               85
    REMOTE_FUNCTION_CALL
    1 MODULE (PBO) SAPMSSY1                            SAPMSSY1                               30
    %_RFC_START
    Chosen variables
    Name
    Val.
    No.      26 Ty.          METHOD
    Name  CL_SWF_RUN_WIM_LOCAL=>IF_SWF_RUN_WIM_UTL_INTERNAL~GET_SYSTEM_USER
    RE_USER
    222222222222
    000000000000
    000000000000
    000000000000
    L_EXCP
    B0004000
    90006000
    SY-MSGID
    SWF_RUN
    55455542222222222222
    376F25E0000000000000
    00000000000000000000
    00000000000000000000
    L_EXCP->T100_MSG-MSGID
    SWF_RUN
    55455542222222222222
    376F25E0000000000000
    00000000000000000000
    00000000000000000000
    SWFCO_WIM_WI_FORWARD
    SWW_WI_FORWARD
    555554544554542222222222222222
    377F79F6F271240000000000000000
    000000000000000000000000000000
    000000000000000000000000000000
    SY-MSGNO
    617
    333
    617
    000
    000
    L_EXCP->T100_MSG+40(6)
    617
    333
    617
    000
    000
    SY-MSGV1
    WORKFLOW_LOCAL_250
    54544445544444533322222222222222222222222222222222
    7F2B6CF7FCF31CF25000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    L_EXCP->T100_MSG+48(100)
    WORKFLOW_LOCAL_250
    54544445544444533322222222222222222222222222222222
    7F2B6CF7FCF31CF25000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    SY-MSGV2
    RFC_READ_DESTINATION_TYPE
    54455444544554445444555542222222222222222222222222
    263F2514F45349E149FEF49050000000000000000000000000
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    L_EXCP->T100_MSG+148(100)
    RFC_READ_DESTINATION_TYPE
    54455444544554445444555542222222222222222222222222
    263F2514F45349E149FEF49050000000000000000000000000
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    SY-MSGV3
    DESTINATION_NOT_EXIST
    44554445444544554545522222222222222222222222222222
    45349E149FEFEF4F5893400000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    L_EXCP->T100_MSG+248(100)
    DESTINATION_NOT_EXIST
    44554445444544554545522222222222222222222222222222
    45349E149FEFEF4F5893400000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    SY-MSGV4
    22222222222222222222222222222222222222222222222222
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    L_EXCP->T100_MSG+348(100)
    22222222222222222222222222222222222222222222222222
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    %_DUMMY$$
    2222
    0000
    0000
    0000
    No.      25 Ty.          METHOD
    Name  CL_SWF_UTL_MAIL=>GET_OWNER
    RE_OWNER
    %_DUMMY$$
    2222
    0000
    0000
    0000
    ME->M_OWNER
    %_VIASELSCR
    0
    4
    ME
    A0005000
    E0001000
    L_WORKITEM
    60009000
    3000C000
    SY-REPID
    CL_SWF_UTL_MAIL===============CP
    4455545554544443333333333333334522222222
    3CF376F54CFD19CDDDDDDDDDDDDDDD3000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    No.      24 Ty.          METHOD
    Name  CL_SWF_UTL_MAIL=>IF_SWF_UTL_MAIL~SEND
    EX_SENT_TO_ALL
    2
    0
    0
    0
    EX_MAIL_OBJECT
    2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    SYST-REPID
    CL_SWF_UTL_MAIL===============CP
    4455545554544443333333333333334522222222
    3CF376F54CFD19CDDDDDDDDDDDDDDD3000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    ME
    A0005000
    E0001000
    OBJECT_HD_CHANGE-ACNAM
    SWW_WI_DISPLAY_FOR_MAIL
    555554544554455445544442222222222222222222222222222222
    377F79F4930C19F6F2FD19C0000000000000000000000000000000
    000000000000000000000000000000000000000000000000000000
    000000000000000000000000000000000000000000000000000000
    OBJPARB
    Table IT_758[1x570]
    \CLASS=CL_SWF_UTL_MAIL\METHOD=IF_SWF_UTL_MAIL~SEND\DATA=OBJPARB
    Table reference: 224
    TABH+  0(20) = E06D6DEFF9060000000000000000000000000000
    TABH+ 20(20) = E0000000F6020000010000003A020000FFFFFFFF
    TABH+ 40(16) = 042A0200600B000010000000C1248401
    store        = 0xE06D6DEFF9060000
    ext1         = 0x0000000000000000
    shmId        = 0     (0x00000000)
    id           = 224   (0xE0000000)
    label        = 758   (0xF6020000)
    fill         = 1     (0x01000000)
    leng         = 570   (0x3A020000)
    loop         = -1    (0xFFFFFFFF)
    xtyp         = TYPE#000046
    occu         = 16    (0x10000000)
    access       = 1     (ItAccessStandard)
    idxKind      = 0     (ItIndexNone)
    uniKind      = 2     (ItUniqueNon)
    keyKind      = 1     (default)
    cmpMode      = 2     (cmpSingleMcmpR)
    occu0        = 1
    groupCntl    = 0
    rfc          = 0
    unShareable  = 0
    mightBeShared = 1
    sharedWithShmTab = 0
    isShmLockId  = 0
    gcKind       = 0
    isUsed       = 1
    isCtfyAble   = 1
    >>>>> Shareable Table Header Data <<<<<
    tabi         = 0x80095FEFF9060000
    pgHook       = 0x0000000000000000
    idxPtr       = 0x0000000000000000
    shmTabhSet   = 0x0000000000000000
    id           = 540   (0x1C020000)
    refCount     = 0     (0x00000000)
    tstRefCount  = 0     (0x00000000)
    lineAdmin    = 16    (0x10000000)
    lineAlloc    = 16    (0x10000000)
    shmVersId    = 0     (0x00000000)
    shmRefCount  = 1     (0x01000000)
    >>>>> 1st level extension part <<<<<
    regHook      = Not allocated
    collHook     = Not allocated
    ext2         = Not allocated
    >>>>> 2nd level extension part <<<<<
    tabhBack     = Not allocated
    delta_head   = Not allocated
    pb_func      = Not allocated
    pb_handle    = Not allocated
    OBJECT_HD_CHANGE-OBJDES
    Workflow 405090 set to status ERROR
    56766667233333327672762776777245545222222222222222
    7F2B6CF70405090035404F03414530522F2000000000000000
    00000000000000000000000000000000000000000000000000
    00000000000000000000000000000000000000000000000000
    %_FSREG_001
    OBJCONT
    Table IT_760[9x510]
    \CLASS=CL_SWF_UTL_MAIL\METHOD=IF_SWF_UTL_MAIL~SEND\DATA=OBJCONT
    Table reference: 225
    TABH+  0(20) = 106F6DEFF9060000000000000000000000000000
    TABH+ 20(20) = E1000000F802000009000000FE010000FFFFFFFF
    TABH+ 40(16) = 042A0200300B000010000000C1248401
    store        = 0x106F6DEFF9060000
    ext1         = 0x0000000000000000
    shmId        = 0     (0x00000000)
    id           = 225   (0xE1000000)
    label        = 760   (0xF8020000)
    fill         = 9     (0x09000000)
    leng         = 510   (0xFE010000)
    loop         = -1    (0xFFFFFFFF)
    xtyp         = TYPE#000045
    occu         = 16    (0x10000000)
    access       = 1     (ItAccessStandard)
    idxKind      = 0     (ItIndexNone)
    uniKind      = 2     (ItUniqueNon)
    keyKind      = 1     (default)
    cmpMode      = 2     (cmpSingleMcmpR)
    occu0        = 1
    groupCntl    = 0
    rfc          = 0
    unShareable  = 0
    mightBeShared = 1
    sharedWithShmTab = 0
    isShmLockId  = 0
    gcKind       = 0
    isUsed       = 1
    isCtfyAble   = 1
    >>>>> Shareable Table Header Data <<<<<
    tabi         = 0x402D5FEFF9060000
    pgHook       = 0x0000000000000000
    idxPtr       = 0x0000000000000000
    shmTabhSet   = 0x0000000000000000
    id           = 541   (0x1D020000)
    refCount     = 0     (0x00000000)
    tstRefCount  = 0     (0x00000000)
    lineAdmin    = 16    (0x10000000)
    lineAlloc    = 16    (0x10000000)
    shmVersId    = 0     (0x00000000)
    shmRefCount  = 1     (0x01000000)
    >>>>> 1st level extension part <<<<<
    regHook      = Not allocated
    collHook     = Not allocated
    ext2         = Not allocated
    >>>>> 2nd level extension part <<<<<
    tabhBack     = Not allocated
    delta_head   = Not allocated
    pb_func      = Not allocated
    pb_handle    = Not allocated
    OWNER
    222222222222
    000000000000
    000000000000
    000000000000
    SENDER
    222222222222
    000000000000
    000000000000
    000000000000
    SY-SUBRC
    0
    0000
    0000
    SWFCO_MAIL_ERROR_NOTIFY
    0002
    3333
    0002
    0000
    0000
    OBJECT_HD_CHANGE
    E          ERRORMESSAGEWorkflow 405090 set to status ERROR                00000000000000 F F S
    4222222222245545445544456766667233333327672762776777245545222222222222222233333333333333242425
    50000000000522F2D5331757F2B6CF70405090035404F03414530522F2000000000000000000000000000000060603
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    OBJECT_TYPE
    RAW
    545
    217
    000
    000
    SWFCO_OBJTYPE_BOR
    BO
    44
    2F
    00
    00
    No.      23 Ty.          METHOD
    Name  CL_SWF_RUN_WIM_LOCAL=>IF_SWF_RUN_WIM_INTERNAL~SEND_ERROR_REPAIR_MAIL
    LT_AGENTS
    Table IT_752[1x28]
    \CLASS=CL_SWF_RUN_WIM_LOCAL\METHOD=IF_SWF_RUN_WIM_INTERNAL~SEND_ERROR_REPAIR_MAIL\DATA=LT_AGEN
    Table reference: 207
    TABH+  0(20) = 806B6DEFF9060000000000000000000000000000
    TABH+ 20(20) = CF000000F0020000010000001C000000FFFFFFFF
    TABH+ 40(16) = 04180100E006000010000000C1248401
    store        = 0x806B6DEFF9060000
    ext1         = 0x0000000000000000
    shmId        = 0     (0x00000000)
    id           = 207   (0xCF000000)
    label        = 752   (0xF0020000)
    fill         = 1     (0x01000000)
    leng         = 28    (0x1C000000)
    loop         = -1    (0xFFFFFFFF)
    xtyp         = TYPE#000022
    occu         = 16    (0x10000000)
    access       = 1     (ItAccessStandard)
    idxKind      = 0     (ItIndexNone)
    uniKind      = 2     (ItUniqueNon)
    keyKind      = 1     (default)
    cmpMode      = 2     (cmpSingleMcmpR)
    occu0        = 1
    groupCntl    = 0
    rfc          = 0
    unShareable  = 0
    mightBeShared = 1
    sharedWithShmTab = 0
    isShmLockId  = 0
    gcKind       = 0
    isUsed       = 1
    isCtfyAble   = 1
    >>>>> Shareable Table Header Data <<<<<
    tabi         = 0xA0696DEFF9060000
    pgHook       = 0x0000000000000000
    idxPtr       = 0x0000000000000000
    shmTabhSet   = 0x0000000000000000
    id           = 537   (0x19020000)
    refCount     = 1     (0x01000000)
    tstRefCount  = 0     (0x00000000)
    lineAdmin    = 16    (0x10000000)
    lineAlloc    = 16    (0x10000000)
    shmVersId    = 0     (0x00000000)
    shmRefCount  = 2     (0x02000000)
    >>>>> 1st level extension part <<<<<
    regHook      = Not allocated
    collHook     = Not allocated
    ext2         = Not allocated
    >>>>> 2nd level extension part <<<<<
    tabhBack     = Not allocated
    delta_head   = Not allocated
    pb_func      = Not allocated
    pb_handle    = Not allocated
    SYST-REPID
    CL_SWF_RUN_WIM_LOCAL==========CP
    4455545554554454444433333333334522222222
    3CF376F25EF79DFCF31CDDDDDDDDDD3000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    ME->IF_SWF_RUN_WIM_INTERNAL~M_SWW_WIHEAD+840(28)
    WS20000014
    55333333332222
    73200000140000
    00000000000000
    00000000000000
    SY-REPID
    CL_SWF_RUN_WIM_LOCAL==========CP
    4455545554554454444433333333334522222222
    3CF376F25EF79DFCF31CDDDDDDDDDD3000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    FUNCNAME
    SWW_WI_DISPLAY_FOR_MAIL
    555554544554455445544442222222
    377F79F4930C19F6F2FD19C0000000
    000000000000000000000000000000
    000000000000000000000000000000
    SWFCO_WI_REMOTE
    R
    5
    2
    0
    0
    PARAMETER-NAME
    WI_ID
    54544
    79F94
    00000
    00000
    SWFCO_CALLBACK_AGENTS
    CALLBACKAGENTS
    54444444454444552222222222222222
    F31CC213BF175E430000000000000000
    00000000000000000000000000000000
    00000000000000000000000000000000
    PARAMETER-VALUE
    000000405090
    333333333333
    000000405090
    000000000000
    000000000000
    ME->IF_SWF_RUN_WIM_INTERNAL~M_SWW_WIHEAD-WI_ID
    000000405090
    333333333333
    000000405090
    000000000000
    000000000000
    PARAMETER
    807020C0
    7080A050
    00000000
    00100010
    LS_MAILOBJ
    2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    ME
    60009000
    3000C000
    SWFCO_WORKITEM_OBJECT
    _WORKITEM
    55454454422222222222222222222222
    F7F2B945D00000000000000000000000
    00000000000000000000000000000000
    00000000000000000000000000000000
    No.      22 Ty.          METHOD
    Name  CL_SWF_RUN_WIM_STATE=>DYN_SEND_ERROR_REPAIR_MAIL
    SWFCO_WORKITEM_OBJECT
    _WORKITEM
    55454454422222222222222222222222
    F7F2B945D00000000000000000000000
    00000000000000000000000000000000
    00000000000000000000000000000000
    %_DUMMY$$
    2222
    0000
    0000
    0000
    No.      21 Ty.          METHOD
    Name  CL_SWF_RUN_WIM_STATE=>EXECUTE_STATE_TRANSITION
    IM_STATE_ACTIONS
    Table IT_279[30x152]
    \CLASS=CL_SWF_RUN_WIM_STATE_FLOW\DATA=M_STATE_ACTIONS
    Table reference: 112
    TABH+  0(20) = 90CE53EFF9060000B04D6BEFF906000000000000
    TABH+ 20(20) = 70000000170100001E0000009800000090010000
    TABH+ 40(16) = 049A01007004000010000000C9248001
    store        = 0x90CE53EFF9060000
    ext1         = 0xB04D6BEFF9060000
    shmId        = 0     (0x00000000)
    id           = 112   (0x70000000)
    label        = 279   (0x17010000)
    fill         = 30    (0x1E000000)
    leng         = 152   (0x98000000)
    loop         = 400   (0x90010000)
    xtyp         = TYPE#000009
    occu         = 16    (0x10000000)
    access       = 1     (ItAccessStandard)
    idxKind      = 1     (ItIndexLinear)
    uniKind      = 2     (ItUniqueNon)
    keyKind      = 1     (default)
    cmpMode      = 2     (cmpSingleMcmpR)
    occu0        = 1
    groupCntl    = 0
    rfc          = 0
    unShareable  = 0
    mightBeShared = 0
    sharedWithShmTab = 0
    isShmLockId  = 0
    gcKind       = 0
    isUsed       = 1
    isCtfyAble   = 1
    >>>>> Shareable Table Header Data <<<<<
    tabi         = 0xF0C453EFF9060000
    pgHook       = 0xF0CE53EFF9060000
    idxPtr       = 0x50E253EFF9060000
    shmTabhSet   = 0x0000000000000000
    id           = 207   (0xCF000000)
    refCount     = 0     (0x00000000)
    tstRefCount  = 0     (0x00000000)
    lineAdmin    = 48    (0x30000000)
    lineAlloc    = 48    (0x30000000)
    shmVersId    = 0     (0x00000000)
    shmRefCount  = 1     (0x01000000)
    >>>>> 1st level extension part <<<<<
    regHook      = 0x204C6BEFF9060000
    collHook     = 0x0000000000000000
    ext2         = 0x0000000000000000
    >>>>> 2nd level extension part <<<<<
    tabhBack     = Not allocated
    delta_head   = Not allocated
    pb_func      = Not allocated
    pb_handle    = Not allocated
    SWFCO_WI_NO_DEADLINE
    0000
    3333
    0000
    0000
    0000
    L_OBJ
    A0005000
    D0002000
    ME
    A0005000
    D0002000
    ME->IF_SWF_RUN_WIM_STATE~NEW_STATUS
    ERROR
    455452222222
    522F20000000
    000000000000
    000000000000
    <%_L003>
    ERROR
    455452222222
    522F20000000
    000000000000
    000000000000
    SY-REPID
    CL_SWF_RUN_WIM_STATE==========CP
    4455545554554455545433333333334522222222
    3CF376F25EF79DF34145DDDDDDDDDD3000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    <%_L004>
    F
    4
    6
    0
    0
    <STATE_ACTION>
    FERROR       01DYN_SEND_ERROR_REPAIR_MAIL
    4455452222222334545544454554555454455444422222222222222222222222222222222222
    6522F200000000149EF35E4F522F2F250192FD19C00000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000
    <%_L002>
    <%_L002>-WI_STAT
    SYST-REPID
    CL_SWF_RUN_WIM_STATE==========CP
    4455545554554455545433333333334522222222
    3CF376F25EF79DF34145DDDDDDDDDD3000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    SWFCO_WI_STATUS_WILD_CARD
    222222222222
    A00000000000
    000000000000
    000000000000
    <%_L002>-WI_TYPE
    <STATE_ACTION>-METHOD
    DYN_SEND_ERROR_REPAIR_MAIL
    4545544454554555454455444422222222222222222222222222222222222
    49EF35E4F522F2F250192FD19C00000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000
    %_SPACE
    2
    0
    0
    0
    LV_EXCP
    F0000000
    F0000000
    No.      20 Ty.          METHOD
    Name  CL_SWF_RUN_WIM_STATE_FLOW=>

    Hello,
    Get help from your abaper on this.
    Vinay

  • Runtime Error while creating FINANCIAL STATEMENT VERSION

    Hi Experts,
    The major concern of the problem is related with the new creation of FINANCIAL STATEMENT VERSION.
    (SPRO --> IMG --> Financial Accounting --> General Ledger Accounting --> Business Transactinons --> Closing > Document> Define Financial Statement Versions.)
    My quries is that is it possiable to maintain more then one FSV for the same company code or for same chart of account.
    If yes then we are trying to do it . But the problem reflect, be the indication that we can`t maintain more then one code.
    Its giving an runtime error
    Runtime Errors         SAPSQL_ARRAY_INSERT_DUPREC                                               
    Except.                CX_SY_OPEN_SQL_DB                                                        
    Date and Time          15.03.2008 18:36:04                                                                               
    Short text                                                                               
    The ABAP/4 Open SQL array insert results in duplicate database records.                                                                               
    What happened?                                                                               
    Error in the ABAP Application Program                                                                               
    The current ABAP program "SAPLFAGL_FSV" had to be terminated because it has                
         come across a statement that unfortunately cannot be executed.                                                                               
    Error analysis                                                                               
    An exception occurred that is explained in detail below.                                   
         The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught              
          in                                                                               
    procedure "FSV_TEXTS_CONVERT" "(FORM)", nor was it propagated by a RAISING                 
          clause.                                                                               
    Since the caller of the procedure could not have anticipated that the                      
         exception would occur, the current program is terminated.                                  
         The reason for the exception is:                                                           
         If you use an ABAP/4 Open SQL array insert to insert a record in                           
         the database and that record already exists with the same key,                             
         this results in a termination.                                                                               
    (With an ABAP/4 Open SQL single record insert in the same error                            
         situation, processing does not terminate, but SY-SUBRC is set to 4.)                       
    We are trying Its giving an abap dump
    Rest the technicall aspect that is comming in ABAP Dump i am not
    getting.....so pls inquire according to yourself.
    Kind Regards,
    Sudhanshu

    Hello
    Logically speaking, a company code can have more than one FSV as long as they share the same chart of accounts.
    When COA is common, the FSV pattern can be designed seperatly to serve the purpose of varied reporting.
    The dump you are getting is a temporary snag. Take a screen shot from SM54 after you execute the report and pass it to BASIS for analysis. They would fix that.
    Reg
    assign points if useful

  • Acrobat v9 Pro and Standard Runtime Error!

    My company recently got in the CD's from Adobe for Acrobat 9 Professional and Acrobat 9 Standard.
    I installed Acrobat 9 Pro on one of our systems. The system got a runtime error every time Adobe Acrobat started citing "C:\Program Files\Adobe\Acrobat 9.0\Acrobat\Acrobat.exe This application has requested the Runtime to terminate it in an unusal way. Please contact the application's support team for more information."
    Initially, I thought it was an issue with that system. So, I installed Acrobat Standard on two other systems. Both units get the same error.
    Of the 3 units 2 are identical IBM workstations with some different software installed. 1 is an HP system. The OS is a fairly clean Windows XP SP2 otherwise very stable installation.
    I searched Adobe forums and here but haven't come across much version 9 questions/comments.
    Initially, I was going to fully uninstall Acrobat and try the installation again. However, now that 2 other systems are getting the same error, I feel it would be a waste of time.
    Any ideas on what to look for to resolve this issue?
    Previous version was the latest v8 which 9 uninstalled.
    Thanks in advance!
    -Dean
    EDIT: I did come across this for version 8 and tried the same fix with 9, but to no effect:
    ================================================================================
    C++ Runtime error after launching Acrobat or Adobe Reader 8 on Windows
    Issue
    When you launch Adobe Acrobat 8 Standard, Professional, or Adobe Reader 8 on Windows, an error occurs:
    Runtime Error!
    Program: C:\Program Files\Adobe\Acrobat 8.0\Acrobat\Acrobat.exe
    This application has requested the Runtime to terminate in an unusual way. Please contact the application's support team for more information.
    Solution
    Disable the Updater.api plug-in.
    Navigate to where Acrobat or Adobe Reader is installed, usually
    C:\Program Files\Adobe\Acrobat 8.0\Acrobat\plug_ins
    or C:\Program Files\Adobe\Reader 8.0\Reader\plug_ins
    Rename the Updater.api plug-in to Updater.api.old
    Relaunch Acrobat or Reader.

    So here is the flaw... Since i dont see many people saying WHAT the flaw is.
    ==== THIS IS WITH ROAMING PROFILE CRASHES! ====
    Adobe's program iterates the network path from left to right, skipping the first word: \\Server\Folder1\Folder2\Folder3\APPLICATION DATA as it searches a user's profile for the APPLICATION DATA folder.
    So starting at FOLDER1 it checks to see if it can "create" a folder. It doesnt do it, but it tries to check its access. If your not in the users profile at this point, the program MOST LIKELY cannot because its a directory NOT owned by the user. THe previous folders is something you wouldn't give NORMAL users access to.
    After the program FAILS to "create" its folder because it cannot -
    The program Crashes:
    *R6025 - Pure Virtual function call
    * The exception unknown software exception (0x40000015) occurred in the application at location 0x2e80f5e3
    * C++ runtime error
    * WINDOWS NAME Collision error.
    === ITS ALL OF THESE! Same error, different points in the crashing ===
    Solution?
    I create a network drive DIRECTLY to the profile, then I update the registery to make that the WINDOWS APPDATA path. ALL of this is done on the user logon scripts. So it was just "solved" one day, except for a new drive letter appearing.
    (Added to login script)
    net use l: \\SERVER\USER PROFILE TREE\USER PROFILE
    REG ADD "HKEY_CURRENT_USER\software\Microsoft\windows\CurrentVersion\Explorer\User Shell Folders" /v AppData /t REG_EXPAND_SZ /d "l:\Application Data" /f
    For our work we use: \\SERVER\USER PROFILE TREE\%USERNAME%\%COMPUTERNAME% - so each user has SEPERATE data per computer they are on.
    ADOBE - PLEASE update your code so it doesnt iterate like this! If it does RESUME on error, to see if its recoverable before the END of the interation. These are simple mistakes...
    THIS will also fix the SIMILAR / SAME(?) BUG in ROXIO products.

  • Runtime error when trying to open an ODS to edit

    Hi,
    I'm encountering a Runtime error while trying to open an ODS to move some datafields to keyfields. When data is loaded into that ODS, it is not giving any Runtime error and allowing me to edit the ODS. But anyhow as there is data in that ODS, I couldn't move the datafields into keyfields. Can anyone suggest me what to do..it's urgent.
    Thanks in advance.
    Hima

    Hi,
    You cannot add add or move fields in ODS if data available in the ODS.
    You get runtime error.
    It's better to delete data from ODS.
    After that activate your all objects of that particular flow.
    Reg,
    Pra

Maybe you are looking for